Influencia de los Productos Hidrofugantes en las Propiedades Superficiales de las Cerámicas Porosas Utilizadas en Cerramientos Exteriores Cara Vista

En esta Tesis se cuantifica la influencia de los productos hidrofugantes en la superficie de la cerámica, en base a la variación cromática que producen. Se definen parámetros metodológicos previos para la medición de la variación cromática: obtención de imágenes digitales en formato JPG, utilización del espacio de color RGB y medición del color a través de los histogramas de imagen. Se realiza una clasificación de la cerámica porosa utilizada en cerramientos cara vista, en base a su fabricación (manual, prensada, extrusionada y klinker) y de los productos hidrofugantes, en base a su composición química (siliconatos, silanos, siloxanos oligoméricos y poliméricos, resina fluorada y silanos/siloxanos). Los materiales utilizados (cerámica y e hidrofugantes) junto con los parámetros metodológicos conforman un plan de ensayos experimental en el que se realizan: Ensayos previos: se caracteriza la cerámica obteniendo su coeficiente de absorción y su porosidad abierta (normas UNE 67.027-84 y UNE-EN 772-4:1999). Se realiza el ensayo de succión (basado en la norma UNE-EN 772-11:2001/A1:2006) en el que se obtienen los parámetros de tasa de absorción y nivel de agua superficial que garantizan que la cerámica está correctamente hidrofugada. Todos los parámetros obtenidos se relacionarán con la variación de color de la cerámica al aplicarle los productos hidrofugantes, para analizar su grado de influencia. Ensayo colorimétrico: se propone una metodología nueva de ensayo basada en la medición digital del color de superficies de materiales inorgánicos porosos y sus posibles cambios cromáticos, mediante los histogramas de imagen. Se usa el espacio de color RGB en el que cada color aparece descompuesto en función de sus tres componentes espectrales primarias de rojo, verde y azul. Se compara la variación cromática que producen los hidrofugantes en las probetas comparándose con la probeta sin tratar. Previamente al ensayo colorimétrico se determinan y ajustan los parámetros del ensayo: número óptimo de fotografías necesarias para que los datos sean fiables, se comprueba si la cámara digital para la obtención de imágenes es fiable, se calibra dicha cámara fotográfica para ver cuál es la desviación respecto a los colores de referencia y se obtiene la variación de valores RGB que percibe el ojo humano. Se obtiene un modelo matemático que permite predecir el color final de la cerámica tratada en función del color inicial de la cerámica sin hidrofugar. Esta Tesis establece una tabla de predicción y posible reproducción del color, además de una recomendación de los productos a utilizar en la cerámica según su color. Se realiza un estudio de microscopia electrónica de barrido para comprobar la alteración producida por los productos hidrofugantes en la superficie de la cerámica y observar la su influencia, además de analizar la penetrabilidad de cada producto.

Caracterización de especies ligeras en cerámicas de Li

Desarrollar cerámicas de Li con propiedades adecuadas para ser utilizadas en el manto reproductor de reactores de fusión. Estudiar el comportamiento de especies ligeras, en particular D, en cerámicas de Li en función de: Composición, Microestructura, Temperatura.

Diseño y construcción de un sistema de archivo personal computadorizado para clínicas odontológicas

El objetivo del sistema es gestionar de manera automática y flexible el archivo profesional de los odontólogos. Los requisitos que debía cumplir el sistema fueron obtenidos mediante consultas a distintos especialistas odontólogos, fruto de las cuales fue la especificación de los tipos de información y los procesos de la misma que - tienen lugar en la consulta del odontólogo.

Comportamiento eléctrico de cerámicas débilment cristalizadas con base de Te02

Los electrolitos vítreos se presentan como una alternativa de gran interés por sus ventajas inherentes a este particular “estado” de la materia: su carácter isotrópico en determinadas dimensiones, los métodos relativamente simples de fabricación, la ausencia del bloqueo por bordes de grano y la facilidad que presentan para poder controlar casi a voluntad su composición química para obtener una dada capacidad de conducción iónica, electrónica o mixta.

Precursores funcionalizantes de poros à base de alginato para obtenção de cerâmicas bioativas

A complexidade de desenvolver novas tecnologias para aplicações em reconstituição óssea se deve à necessidade de combinar várias propriedades químicas e físicas para que o material proporcione o desempenho almejado. Particularmente, em aplicações que visam osteogênese, os enxertos sintéticos devem ser bioativos, possuir porosidade com volume, geometria e interconectividade de poros controlados, além de ter boas propriedades mecânicas, dentro de limites relativamente rígidos. Por essa razão, o recobrimento de materiais bioinertes com cerâmicas bioativas se tornou o foco da presente pesquisa. O objetivo desse estudo foi desenvolver um novo método de produção de enxertos cerâmicos com macroporosidade funcionalizada, onde a formação e o revestimento dos poros são realizados em uma única etapa. Foi realizado o estudo de recobrimento com vidro bioativo e fosfato de cálcio. Para isso, agentes porogênicos na forma de grânulos (de 600 μm a 2 mm de diâmetro) foram sintetizados pelo método da gelificação de uma solução aquosa de alginato de sódio gotejada em solução de nitrato de cálcio (0,5 M), com incorporação de outros elementos para a formação de biovidro ou fosfato de cálcio. Esses grânulos foram conglomerados a um vidro ou alumina em pó, formando um compósito, que foi tratado termicamente para sinterização e formação de poros. No caso da matriz vítrea, a sinterização ocorreu com cristalização simultânea e concorrente. As cerâmicas resultantes foram caracterizadas por microscopia óptica e eletrônica de varredura, sendo possível observar a formação de macroporos aproximadamente esféricos (de 600 μm a 2 mm de diâmetro) revestidos internamente por uma camada de material com possível composição bioativa.

Avaliação da conformidade dos blocos cerâmicos produzidos em algumas cerâmicas no Rio Grande do Norte

The final quality of the works accomplished by the building construction industry depends directly on the quality of the materials supplied and used during all their phases of execution. The federal government participation and several state programs have established conditions to stimulate and require the increment of the quality level in the building construction industry´s product chain. These programs aim at the product conformity to the technical standards. Within this context, the evaluation program of the ceramic product conformity in Rio Grande do Norte state is assessing the conformity degree to Brazilian Technical Standards of ceramic bricks and tiles made in the ceramic production area in the state. In this work, is determine the degree of conformity of the sealing ceramic bricks made by some companies in different areas of the state, such as Assú, São Gonçalo do Amarante, Apodi, Parelhas, São José do Mipibu e Macaíba. Using the technical standards as a point of reference, we attempted to reproduce in the laboratory the experimental procedures to the analysis execution, according to the specifications. It was possible to determine that none of the evaluated samples are in strict conformity with the current technical standards, what reflects the real situation of the products available on the market.

Incorporação do resíduo de cascalho de perfuração de poços de petróleo em formulações cerâmicas

During its operations, the oil industry generates a lot of waste, including gravel from drilling. Control of environmental impacts caused by this waste represents a major challenge. Such impacts can be minimized when it is given an appropriate management by being properly treated and properly disposed or recycled. The properties of these materials can be greatly influenced when a waste is added to its composition. This work aims to study the incorporation of gravel waste oil-well drilling in the standard body for production of red ceramic from a ceramic industry in São Gonçalo do Amarante / RN. The success of the incorporation can minimize costs in the production of ceramic pieces and reduce the environmental impacts caused by waste. The raw materials used were collected, characterized, and formulated with the percentages of 0%, 20% and 40% by weight of substitution of residue were synthesized at temperatures of 900, 1.010 and 1.120 °C using 30 minute firing intervals, 1 hour and 30min and 2 hours and 30 minutes, based on a factorial design 2³. Samples were then subjected to the tests of Water Absorption, Linear Retraction Firing, Flexural Rupture Strength, Apparent Porosity and Apparent Specific mass and Scanning Electron Microscopy (SEM) of break section. The results showed that the use of the residue for the manufacture of the ceramic products is possible (tiles, bricks and massive hollow bricks) replacing the clay to 40%, meeting the requirements of the standard and the literature for the technological properties of the final product.

Avaliação do desempenho de argamassas à base de cimento Portland para rejuntamento de placas cerâmicas tipo II com adição de pó de borracha de pneus

In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.

Avaliação do desempenho de argamassas à base de cimento Portland para rejuntamento de placas cerâmicas tipo II com adição de pó de borracha de pneus

In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.

Referência e contra referência em saúde bucal: regulação do acesso aos centros de especialidades odontológicas

Objective Based on the system of reference and counter-reference and comprehensiveness in oral health care, we aimed to examine ways of refering users to Specialized Dental Care Centers (SDCC) and the interface between them and Primary Care. Methods This is a cross-sectional study carried out with users and dentists of SDCC in a metropolitan region of Northeast of Brazil. Analyses were descriptive, and the association test was done with chi-square. Results Six forms of entry to specialized service were identified: free demand (13.8 %) and reference by the Primary Care dentist (63.2 %) were most frequent. Users referred by the basic health unit dentist had more interest in making a counter-reference than the others (p<0.001, PR=4.65, 95 % CI: 2.74 to 7.91), while individuals without this referral had 1.49 times more difficulty obtaining care (95 % CI: 1.02 to 2.17). Referral procedures are a decisive factor for counter-references. However, the high demand for primary care services and the short supply these services can offer in the face of needs make SDCC performance difficult. Conclusion The analysis of oral health practices from the perspective of network modeling points to the service's need to establish protocols for regulation in a bid to improve access to and the quality of care provided.