Sistemas cerámicos puros parte 2: materiales, propiedades ópticas y consideraciones clínicas

While dentistry continues to advance, the aesthetic techniques have evolved in proceedings more effective, functional and biocompatible. Meanwhile, cosmetic dentistry has become a bit more complex and technically difficult. With improvement of the properties (physical and optical) of the ceramics and the establishment of a working protocol, ceramic restorations have become increasingly popular. Currently there are several ceramic systems have excellent optical properties such as opalescence, fluorescence, translucency, chromaticity, which allow the restoration to mimic the tooth structure. From the physical point of view has restored biomechanical integrity and strengthening the remaining tooth structure. All this has led the profession to experience the use of new ceramic systems ranging from conventional feldspathic ceramics to modem ceramic reinforced, injected or computer-aid made. The material selection should be based on clinical need, aesthetic and functional requirements, restoration site, prosthetic design and laboratory techniques. In this article we will deal with the characteristics of the materials, their optical properties and clinical considerations for proper selection.

Correlación entre diferentes métodos de evaluación de color en el clareamiento dental. Correlation between different methods for co

The aim of this study was to evaluate the correlation of color change on bleaching tooth through delta E (ΔE) by the spectrophotometer Spectroshade (SS) and digital program Scanwhite (SW). Methods: 25 patient volunteers were recruited from Operative Dentistry at Universidad de Chile Dental School, between 18 to 30 years, with good oral hygiene. Exclusion criteria: Previous experienced tooth bleaching, anterior restorations, cervical lesions, pain dental, pregnant patient, stained teeth, malposition of the teeth and periodontal pathology. The bleaching was made in two sessions with three different bleaching systems which were randomly. The assessment of color change through ΔE was made on the two upper central incisors (N=50) by the SS and SW. The color in the same teeth were measured before (T0) and after (T1) of the bleaching treatment. Data were analyzed using test Spearman correlation coefficient (Rho) with a significant level of 95%. Results: The results showed a positive and significant correlation (0.676), with a statistically significant difference (p<0.05). Conclusion: There is correlation in the measurement of color change on bleaching tooth by SS and SW.

Estado actual del blanqueamiento: sigue siendo un tratamiento seguro? review

The demand for cosmetic dentistry, including teeth whitening, has increased in recent years. The home teeth whitening and in-office, are widely used in dental practice. The mechanism by which it works is by oxidation of the chromogenic existing tooth structure. This is an effective and minimally invasive procedure that achieves tooth lighten the color, however, may cause alterations in the enamel surface, such as a dental permeability increase. Another effect caused by this procedure is tooth sensitivity, being the most common side effect, up to 65% of individuals have had a secondary effect at least once during treatment. This sensitivity and gingival irritation caused by bleaching may vary depending on the patient and used bleaching product

Adesivos multi-uso-avaliação da resistência adesiva a dentina frente a teste de cisalhamento, estereomicroscopia e microscopia eletrônica de varredura

Recent bonding systems have been advocated as multi-purpose bonding agents. The aim of this study was to determine if some of these bonding systems could be associated to composite resins from different manufacturers. This investigation was conducted to test lhe shear bond strength of three bonding systems: Scotchbond Multi-Purpose (3M Dental Products), Optibond Light Cure (Kerr) and Optibond Dual Cure (Kerr), when each of them was associated to lhe composite resins: Z1 00 (3M Dental Products), Prisma - APH (Dentsply) and Herculite XRV (Kerr). Seventy-two flat dentin bonding sites were prepared to 600 grit on human premolars mounted using acrilic resins. The teeth were assigned at random to 9 groups of 8 samples each. A split die with a 3mm diameter was placed over lhe surface of lhe dentin treated with one of lhe adhesive systems, and lhe selected composite resin was inserted and light cured. The split mold was removed and all samples were termocycled and stored in 37ºC water for 24 hours before testing. Shear bond strength was determined using an lnstron Universal testing machine. Some failures were examined under lhe S.E.M. Data was analysed by one-way analysis of variance, that demonstrated a significant difference (p<0,05) in the mean shear bond strength among Optibond Light Cure (15,446 MPa), Scotchbond Multi-Purpose (13,339 MPa) and Optibond Dual Cure (10,019 MPa). These values did not depend on the composite resin used. The association between bonding system/composite resin was statistycally significant (p<0,05) and the best results were obtained when the composite resins Z100 and Herculite were used with the adhesive system Optibond Light Cure, and when the composite resin APH was used with the adhesive system Scotchbond Multi-Purpose

Avaliação da biocompatibilidade de dois adesivos dentinários pelo estudo das reações teciduais em conjuntivo de ratos

The biocompatibility of two dentin adhesives (Scotchbond MultiPurpose- 3M and Optibond Multi-Use - Kerr) was evaluated in rats subcutaneous connective tissue implants. Polyethylene tubes filled with the adhesives were surgically implanted into the dorsal subcutaneous tissues of rats. The tubes were left implanted for periods of 14, 30, 60 and 84 days, following wich the animais were killed and the implants, together with the surrounding tissue, were excised. The specimens were then fixed in 10 per cent formalin, sectioned serially and stained with hematoxylin and eosin and then, examined by light microscopy. After 14 and 30 days the tubes were surrounded by a mild to moderate inflammatory infiltration. After 60 and 84 days microscopic examination revealed the formation of a connective tissue capsule around each tube. The microscopic examination of the biopsy specimens allowed to conclude that: a) both dentin adhesives are considered biologically acceptable when placed in contact with rats subcutaneous connective tissue; b) in the observation period of 30 days there were moderate tissue reaction to the Optibond Multi-Use -light cure- (Kerr); c) after 60 and 84 days the use of both dentine adhesives did not interfere in the healing of the surrounding connective tissue

Comparação termométrica entre preparos cavitários realizados com turbinas de alta-rotação e laser de Er:YAG

The aim of this study was to compare temperature increases produced by a well-known equipment, the high-speed handpieces, with a relatively new instrument, the Er:YAG laser (350 mJ/10 Hz). Thirty-five bovine mandibular incisors, which were reduced to an enamel/dentin thickness of 2,5 mm, were used. Cavity preparation was done till a depth of 2, 5 mm. A thermocouple was placed to read the temperature inside of the pulp chamber. Analysis was performed in these groups: I - high-speed handpiece without water-cooling (n=10); II - high-speed handpiece with water-cooling (n=10); III - Er:YAG laser without water-cooling (n=5); IV- Er:YAG laser with water-cooling (n=10) Group III had only 5 teeth because it was impossible to properly make the cavity preparations by the laser equipment without water cooling. The temperature increases were recorded in a computer linked to the thermocouples and the data of the groups I, II and IV were submitted to Dunn's multiple comparison test (p<0,05). The medium temperature increases were: 11,64ºC for group I, 0,96ºC for group II, 40,86ºC for group III and 2,9°C for group IV. There were no statistical differences between groups lI and IV, and these were different from group I. The cavity preparations made by the high-speed and the laser equipment generated very similar heat increases under water-cooling. The water-cooling is essential to avoid aggressive temperature increases, both when using the high-speed and the laser equipment, and with laser it is especially necessary for ablation of enamel

Estudo comparativo in vitro do efeito da ciclagem térmica sobre a resistência à tração de copings metálicos cimentados sobre dentes naturais, utilizando se de dois agentes cimentantes

Pós-graduação em Odontologia Restauradora - ICT

Presença de candida e de anticorpos anti-candida na cavidade bucal de pacientes com periodontite crônica do adulto

The presence of Candida and the production of histolytic enzyms by the isolated samples were observed in the saliva and gingival fluid in adult chronic periodontitis patients and health ones. It was also verified the quantity of antibodies against Candida (IgG, IgA, IgM and IgE) in the saliva and sera of the same patients through ELISA technique. Yeasts of the genus Candida mainly C. albicans were isolated from saliva in higher number from adult chronic periodontitis patients in relation to the controle with statistically significant difference. The meon of the quantity of isolated Candida (UFC/ml) were higher for periodontítis patients, although this difference was not statistically significative. Samples of Candida isolated from both groups produced hystolytic enzymes (hyaluronidase, condroitin sulfatase, proteinase, phospholipase) that are considered patogenicity factors in periodontol diseases. Only one sample of each group (C albicans) didn't produce the four analysed enzymes. The antibodies levels against Candida (IgG, IgM and IgA in saliva, IgG and IgA in sera and IgG and IgM in gingival Fluid), were statistically higher in adult chronic periodontitis patients in relation to periodontically health individuals, suggesting humoral immune response by periodontitis patients to the yeasts of the genus Candida

Saúde coletiva: promoção de saúde bucal na gravidez

Objective: The aim of this study was to analyze the perception and attitudes about oral health of pregnant women recorded on SIS-Prenatal from Bilac city, São Paulo State. Method: the data collection was through interviews with pregnant women using a semi-structured questionnaire. Pregnant women that were not present on attendance with gynecologist and those whose children were born were excluded of sample. Result: Among the  20 interviewed pregnant women, 80% didn’t received any type of information about oral health during pregnancy, 45% of total didn’t know how to maintain baby’s oral health,  85% didn’t know the mean of carie disease. The majority of pregnant women (95%) interested to make part of projects about promotion of oral health. Conclusion: the future mothers showed little knowledge in relation to preventive proceedings in dentistry and about diseases that could involve their and baby’s oral health. It’s necessary to perform programs about oral health, pointing the cares for mother-baby

Emprego de ma teriais rest auradores adesivos direto no ângulo incisal de incisivos centrais fra turados

A case report of a patient who presents as chief complaint presence of stained restorations in the anterior teeth. After analysis and discussion of the clinical therapeutic approaches to be adopted, it was observed the presence of type class IV restorations on teeth 11 and 21, due to an oblique coronal fracture in the past. But the patient was not satisfied with the aesthetic result, then where was planned the realization of the removal of the restorations, for subsequently be used direct restorative materials for the correction of form, function and esthetics. The final result showed that the restorations were able to return the form, function and aesthetic dental, thereby evidencing the proven development of restorative dentistry in the solution of aesthetic problems.

Cryptococcus: isolamento ambiental e caracterização bioquímica

Cryptococcosis is an opportunistic fungal infection caused by Cryptococcus yeasts, especially C. neoformans and Cryptococcus gattii. The fungus is found in substrates of animal and vegetable origin, and infection occurs through inhalation and seedlings present in the environment. The present study aimed to investigate the existence of microfocus Cryptococcus sp. from the environmental samples of Araçatuba city, São Paulo, featuring new niches, by decoupling the direct relationship between fungus and host in order to minimize the risk of contamination of man and animals, understanding the ecoepidemiology of Cryptococcus. Fifty samples from hollows and tree trunks were harvested (Cassia sp., Ficus sp., Caesalpinea peltophorides) from ten representatives in the urban perimeter. The samples were immediately sent to the Laboratory of Bacteriology and Mycology, Faculty of Veterinary Medicine Araçatuba - Unesp where they were processed and plated on Petri dishes containing agar seed Niger and Sabouraud dextrose agar with chloramphenicol, incubated at 30ºC for a period of no less than 5 days. Afterwards they were subimitted to biochemical tests: urease production, thermotolerance at 37°C and quimiotipagem in CGB agar (L- Canavanine-Glycine-Bromothymol blue). The results showed that 17 (34%) cultures were positive for Cryptococcus, 9 (18%) for Cryptococcus gattii and 8 (16%) for Cryptococcus neoformans. Other yeast correlated as Rhodotorula sp. and Candida sp. were isolated. We conclude that the infectious propagules of Cryptococcus are dispersed in nature and constitute an environmental microfocus, not necessarily being bound to a single host.

Ocorrências e distribuição de bactérias resistentes a metais pesados em sedimentos da Baía do Araça, São Sebastião (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sistema para depleção de proteínas em Xanthomonas citri subsp. citri

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genes associados à virulência e multirresistência de antimicrobianos em linhagens Trueperella Pyogenes isoladas de mastite e outras afecções em animais domésticos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)