Efficient Synthesis of Single-Chain Polymer Nanoparticles via Amide Formation

Single-chain technology (SCT) allows the transformation of individual polymer chains to folded/collapsed unimolecular soft nanoparticles. In this work we contribute to the enlargement of the SCT toolbox by demonstrating the efficient synthesis of single-chain polymer nanoparticles (SCNPs) via intrachain amide formation. In particular, we exploit cross-linking between active methylene groups and isocyanate moieties as powerful "click" chemistry driving force for SCNP construction. By employing poly(methyl methacrylate)- (PMMA-) based copolymers bearing beta-ketoester units distributed randomly along the copolymer chains and bifunctional isocyanate cross-linkers, SCNPs were successfully synthesized at r.t. under appropriate reaction conditions. Characterization of the resulting SCNPs was carried out by means of a combination of techniques including size exclusion chromatography (SEC), infrared (IR) spectroscopy, proton nuclear magnetic resonance (H-1 NMR) spectroscopy, dynamic light scattering (DLS), and elemental analysis (EA).

Construção, clonagem e expressão do fragmento B da toxina diftérica de Corynebacterium diphtheriae (cepa PW- 8) em Mycobacterium bovis BCG sub-cepa Moreau

A vacina anti-diftérica de uso corrente no Brasil (DTP), embora de alta eficácia na prevenção da difteria, está associada com episódios de toxicidade e reatogenicidade no recipiente vacinal, resultantes de proteínas residuais derivadas do processo de produção ou detoxificação. Estratégias para o desenvolvimento de vacinas menos reatogênicas e ao mesmo tempo mais eficazes e economicamente viáveis contra a difteria têm sido alvo de intensa investigação. A alternativa proposta por nosso grupo é a utilização da vacina contra a tuberculose (Mycobacterium bovis BCG sub-cepa Moreau), como vetor do gene que codifica o fragmento B da toxina diftérica (dtb) de 58,3 kDa. Neste trabalho o dtb foi clonado no vetor micobacteriano bifuncional (pUS977) de expressão citoplasmática e os clones recombinantes (pUS977dtbPW8), após a transformação do BCG, foram testados com relação a expressão do DTB em BCG e quanto a antigenicidade frente a anticorpos policlonais anti-toxóide diftérico por Immunobloting. A integridade do gene dtb e a identidade das sequências de DNA da construção plasmidial pUS977dtbPW8 foram confirmadas por sequenciamento de DNA e análise de similaridade. A imunogenicidade do BCGr pUS977dtbPW8 expressando o DTB foi investigada em camundongos BALB/c, os resultados obtidos revelaram uma soroconversão específica (IgG). A infectividade e atividade microbicida do BCGr pUS977dtbPW8 no ambiente intracelular foi avaliada através da infecção de linhagens de células de monócitos humano (THP-1), os dados obtidos indicaram que houve sobrevivência intracelular em até 12 dias. Nesse contexto, esplenócitos dos camundongos imunizados com 30 e 60 dias foram extraídos, mostrando que o BCGr pUS977dtbPW8 persistiu até 60 dias na ausência de pressão seletiva e a viabilidade celular não sofreu alteração significativa durante o período testado. Por outro lado, o BCGr pUS977dtbPW8, quando submetido a seis sub-cultivos consecutivos in vitro não apresentou diferença significativa na capacidade de expressar o DTB, demonstrando portanto a persistência da estabilidade funcional da linhagem recombinante. A estabilidade estrutural da construção pUS977dtbPW8 também foi avaliada por PCR confirmando a presença do gene dtb em colônias do BCGr pUS977dtbPW8 . Adicionalmente, foi possível avaliar preliminarmente in vitro a capacidade soroneutralizante dos soros de camundongos imunizados com BCGr pUS977dtbPW8 após 30 e 60 dias em células VERO. A ação citotóxica da toxina diftérica entre as diluições de 1/4 e 1/16 foram neutralizadas com o pool de soros imunes com 60 dias. Finalmente, em nosso estudo foi possível avaliar o potencial da vacina BCG como vetor de expressão de um antígeno de Corynebacterium diphtheriae in vitro e in vivo.

青蒿素生物合成相关基因的功能分析及遗传转化研究

从中国传统药用植物青蒿（Artemisia annua L.）中提取的青蒿素及其半合成衍生物如蒿甲醚等是一类新型的抗疟特效药，特别是对抗氯喹的恶性疟疾和脑型疟疾有很好的疗效。由于青蒿素在植物中的含量极低，使得其价格很高，特别是对于亚非拉等第三世界国家来说。因此如何提高青蒿素的产量成为近年来研究的热点。各种传统的育种、生理生化手段和细胞培养技术均未取得较好的结果，因此，利用植物基因工程技术提高青蒿素产量已成为研究的重点之一。 本论文围绕青蒿素的生物合成途径开展了以下的工作： 一、中药青蒿紫穗槐二烯合酶的大肠杆菌表达、纯化与功能鉴定 利用RT-PCR方法，从中药青蒿高产株系001中克隆到的中药青蒿紫穗槐二烯合酶(ADS) cDNA, 其推测编码蛋白与前人报道的有两个位点的突变。将其开放阅读框插入到原核表达载体pET30a(+)的BamHⅠ和XhoⅠ酶切位点之间，构建N端携带有HIS6表达标签的紫穗槐二烯合酶重组表达载体pETADS。将pETADS转入大肠杆菌BL21(DE3)， IPTG (Isopropyl-beta -D-thiogalactoside)诱导重组紫穗槐二烯合酶的表达。表达产物经镍琼脂糖柱纯化。纯化蛋白加入酶促反应体系（含FPP），GC-MS分析酶促反应体系的正己烷萃取物，结果显示重组紫穗槐二烯合酶可以催化FPP向紫穗槐二烯的转化。体外酶促动力学分析表明，两个位点的氨基酸突变，并没有影响到青蒿紫穗槐二烯合酶的催化活性。基因组DNA杂交表明，紫穗槐二烯合酶基因在001株系基因组中至少有4个拷贝。 二、中药青蒿鲨烯合酶的大肠杆菌表达、纯化与功能鉴定 将经RACE方法克隆到的中药青蒿鲨烯合酶cDNA(AF302464) 开放阅读框的3'末端截短99 bp，插入到原核表达载体pET30a(+)的NcoⅠ和BamHⅠ酶切位点之间，构建N端和C端均携带有HIS6表达标签的鲨烯合酶重组表达载体pETSSA。将pETSSA转入大肠杆菌BL21(DE3)， IPTG (Isopropyl-beta-D-thio galactoside)诱导重组鲨烯合酶的表达。表达产物经镍琼脂糖柱纯化。纯化蛋白加入酶促反应体系（含FPP和NADPH），GC-MS分析酶促反应体系的正己烷萃取物，结果显示重组鲨烯合酶可以催化FPP向鲨烯的转化。青蒿鲨烯合酶的功能鉴定，为进一步利用反义或RNAi技术限制甾类生物合成，从而提高青蒿中的青蒿素含量提供了基础。 三、中药青蒿法呢醇合酶原核表达、纯化与功能鉴定 将经RACE方法克隆到的中药青蒿倍半萜合酶cDNA ( AF304444) 开放阅读框插入到原核表达载体pET30a(+)的NcoⅠ和BamHⅠ酶切位点之间，构建N端和C端均携带有HIS6表达标签的重组表达载体pET30SESQ。将pET30SESQ转入大肠杆菌BL21(DE3)， IPTG (Isopropyl-beta-D-thioga lactoside)诱导蛋白表达，表达产物经镍琼脂糖柱纯化。纯化蛋白加入酶促反应体系（FPP），GC-MS分析酶促反应体系的正己烷萃取物，结果显示此重组酶可以催化FPP向法呢醇的转化。 四、中药青蒿FPS、ADS双功能酶基因的构建、表达与功能鉴定 将青蒿素生物合成途径中催化两步连续反应的酶：法呢基焦磷酸合酶和紫穗槐二烯合酶的基因进行融合，经大肠杆菌表达后鉴定融合蛋白的功能，结果表明融合蛋白具有了双功能酶活性。进一步将融合酶基因转入酿酒酵母中，发酵后检测紫穗槐二烯的含量，并与同时转入法呢基焦磷酸合酶和紫穗槐二烯合酶单个基因的酵母、单独转入紫穗槐二烯合酶基因的酵母进行了比较，结果表明，转入双功能酶的酵母发酵获得的紫穗槐二烯含量要比两个对照酵母高，这表明，获得的双功能酶的催化效率要比两个单独酶的催化效率高。 五、过量表达青蒿紫穗槐二烯合酶对青蒿中青蒿素及其前体物含量的影响 利用根癌农杆菌介导，将青蒿紫穗槐二烯合酶转入青蒿株系001，分子检测证明，紫穗槐二烯合酶整合到了青蒿基因组中并在mRNA水平得到了高效表达。部分转基因青蒿的青蒿素含量有明显增加，最多的比001株系提高了41%。青蒿酸和二氢青蒿酸含量测定表明，转基因青蒿株系的青蒿酸和二氢青蒿酸含量最多的比对照分别提高了47%和79%。这些结果表明，紫穗槐二烯合成在青蒿素生物合成途径中是一个限速步骤，同时，也显示青蒿酸或二氢青蒿酸的进一步转化也可能是青蒿素生物合成中下游的限速步骤。

Differential expression and characterization analysis of a new gene with WD domains in fish oogenesis

A new gene with WD domains is cloned and characterized according to its differential transcription and expression between previtellogenic oocytes (phase I oocytes) and fully-grown oocytes (phase V oocytes) from natural gynogenetic silver crucian carp (Carassius auratus gibelio) by using the combinative methods of suppressive subtraction hybridization, SMART cDNA synthesis and RACE-PCR. The full-length cDNA is 1870 bp. Its 5 ' untranslated region is 210 bp, followed by an open reading frame of 990 bp, which has the typical vertebrate initiator codon of ANNATG. The open reading frame encodes a protein with 329 amino acids. It has 670 bp of 3 ' untranslated region and an AATAAA polyadenylation signal. Because it has 92% homology to STRAP (serine-threonine kinase receptor-associated protein), a recently reported gene, we named it FSTRAP (fish STRAP). Virtual Northern blotting indicated that the FSTRAP was transcribed in fully-grown oocytes (phase V oocytes), but not in previtellogenic oocytes (phase I oocytes). RT-PCR analysis showed that FSTRAP was transcribed in brain, heart, kidney, muscle, ovary, spleen and testis, but not in liver. And its mRNA could be detected in the oocytes from phase II to phase V. Western blotting also showed that FSTRAP protein could be detected in brain, heart, kidney, muscle, ovary, spleen and testis except liver. Results of Western blotting on various oocytes were also similar to the RT-PCR data. FSTRAP protein was not expressed in the previtellogenic oocytes. Its expression initiated from phase II oocytes after vitellogenesis, and was consistent with the mRNA transcription.

Liquid-filled microstructured polymer fibers as monolithic liquid-core array fibers

Liquid-filled microstructured polymer optical fibers (MPOFs) as monolithic liquid-core array fiber are proposed and prepared by injecting high-refractive-index liquid into the holes array of the MPOFs. One example for potential applications is demonstrated as a new kind of coherent imaging fiber. It provides great potential for applications in chemical sensing, biosensors, and endoscopy, particularly in bifunctional detection. (C) 2009 Optical Society of America

融合蛋白方法制备顺序酶传感器

针对顺序酶传感器酶膜活力低、互换性差的难题，该研究以麦芽糖传感器为研究对象，提出了融合蛋白的解决方案，建立了融合蛋白技术制备顺序酶传感器的模式方法.该研究首次将融合蛋白技术引入生物传感器的研究，成功地构建了具有双酶活力的融合蛋白，建立了融合蛋白技术制备顺序酶传感器的模式方法，为解决顺序酶传感器灵敏度和互换性差的难题提供了新的途径，同时也为解决其它顺序酶反应的低效率问题提供了一种新思路.

Quartz crystal microbalance study of the kinetics of surface initiated polymerization

Surface initiated polymerization (SIP) is a valuable tool in synthesizing functional polymer brushes, yet the kinetic understanding of SIP lags behind the development of its application. We apply quartz crystal microbalance (QCM) to address two issues that are not fully addressed yet play a central role in the rational design of functional polymer brushes, namely quantitative determination of the kinetics and the initiator efficiency (IE) of SIP. SIP are monitored online using QCM. Two quantitative frequency-thickness (f-T) relations make the direct determination and comparison of the rate of polymerization possible even for different monomers. Based on the bi-termination model, the kinetics of SIP is simply described by two variables, which are related to two polymerization constants, namely a = 1/(k (p,s,app)-[M][R center dot](0)) and b = k (t,s,app)/(k (p,s,app)[M]). Factors that could alter the kinetics of SIP are studied, including (i) the molecular weight of monomers, (ii) the solvent used, (iii) the initial density of the initiator, (iv) the concentration of monomer, [M], and (v) the catalyst system (ratio among the ingredients, metal, ligands, and additives). The dynamic nature of IE is also described by these two variables, IE = a/(a + bt). Instead of the molecular weight and the polydispersity, we suggest that film thickness, the two kinetic parameters (a and b), and the initial density of the initiator and IE be the parameters that characterize ultra-thin polymer brushes. Besides the kinetics study of SIP, the reported method has many other applications, for example, in the fast screening of catalyst system for SIP and other polymerization systems.

Pt-based anode catalysts for direct ethanol fuel cells

In the present work, several carbon supported PtSn and PtSnRu catalysts were prepared with different atomic ratios and tested in direct ethanol fuel cells (DEFC) operated at lower temperature (T=90 degreesC). XRD and TEM results indicate that all of these catalysts consist of uniform nano-sized particles of narrow distribution and the average particle sizes are always less than 3.0 nm. As the content of Sn increases, the Pt lattice parameter becomes longer. Single direct ethanol fuel cell tests were used to evaluate the performance of carbon supported PtSn catalysts for ethanol electro-oxidation. It was found that the addition of Sn can enhance the activity towards ethanol electro-oxidation. It is also found that a single DEFC of Pt/Sn atomic ratioless than or equal to2, "Pt1Sn1/C, Pt3Sn2/C, and Pt2Sn1/C" shows better performance than those with Pt3Sn1/C and Pt4Sn1/C. But even adopting the least active PtSn catalyst, Pt4Sn1/C, the DEFC also exhibits higher performance than that with the commercial Pt1Ru1/C, which is dominatingly used in PEMFC at present as anode catalyst for both methanol electro-oxidation and CO-tolerance. At 90 degreesC, the DEFC exhibits the best performance when Pt2Sn1/C is adopted as anode catalysts. This distinct difference in DEFC performance between the catalysts examined here is attributed to the so-called bifunctional mechanism and to the electronic interaction between Pt and Sn. It is thought that -OHads, Surface Pt active sites and the ohmic effect of PtSn/C catalyst determines the electro-oxidation activity of PtSn catalysts with different Pt/Sn ratios. (C) 2004 Elsevier B.V. All rights reserved.

Separation of acidic and basic compounds in capillary electrochromatography with polymethacrylate-based monolithic columns

Methacrylate-based monolithic columns with electroosmotic flow (EOF) or very weak EOF are prepared by in situ copolymerization in the presence of a porogen in fused-silica capillaries pretreated with a bifunctional reagent. Satisfactory separations of acidic and basic compounds on the column with EOF at either low or high pH are achieved, respectively. With sulfonic groups as dissociation functionalities, sufficient EOF mobility still remains as high as 1.74 x 10(-4) cm(2) s(-1) V-1 at low pH. Under this condition, seven acidic compounds are readily separated within 5.7 min. Moreover, at high pH, the peak shape of basic compounds is satisfactory without addition of any masking amines into running mobile phase since the secondary interaction between the basic compounds and the monolithic stationary phase are minimized at high pH. Reversed-phase mechanism for both acidic and basic compounds is observed under investigated separation conditions. In addition, possibilities of acidic and basic compound separations on a monolithic column with extremely low EOF are discussed. (C) 2004 Elsevier B.V. All rights reserved.

Pt based anode catalysts for direct ethanol fuel cells

In the present work several Pt-based anode catalysts supported on carbon XC-72R were prepared with a novel method and characterized by means of XRD, TEM and XPS analysis. It was found that all these catalysts are consisted of uniform nanosized particles with sharp distribution and Pt lattice parameter decreases with the addition of Ru or Pd and increases with the addition of Sn or W. Cyclic voltammetry (CV) measurements and single direct ethanol fuel cell (DEFC) tests jointly showed that the presence of Sn, Ru and W enhances the activity of Pt towards ethanol electro-oxidation in the following order: Pt1Sn1/C > Pt1Ru1/C > Pt1W1/C > Pt1Pd1/C > Pt/C. Moreover, Pt1Ru1/C further modified by W and Mo showed improved ethanol electro-oxidation activity, but its DEFC performance was found to be inferior to that measured for Pt1Sn1/C. Under this respect, several PtSn/C catalysts with different Pt/Sn atomic ratio were also identically prepared and characterized and their direct ethanol fuel cell performances were evaluated. It was found that the single direct ethanol fuel cell having Pt1Sn1/C or Pt3Sn2/C or Pt2Sn1/C as anode catalyst showed better performances than those with Pt3Sn1/C or Pt4Sn1/C. It was also found that the latter two cells exhibited higher performances than the single cell using Pt1Ru1/C, which is exclusively used in PEMFC as anode catalyst for both methanol electro-oxidation and CO-tolerance. This distinct difference in DEFC performance between the catalysts examined here would be attributed to the so-called bifunctional mechanism and to the electronic interaction between Pt and additives. It is thought that an amount of -OHads, an amount of surface Pt active sites and the conductivity effect of PtSn/C catalysts would determine the activity of PtSn/C with different Pt/Sn ratios. At lower temperature values or at low current density regions where the electro-oxidation of ethanol is considered not so fast and its chemisorption is not the rate-determining step, the Pt3Sn2/C seems to be more suitable for the direct ethanol fuel cell. At 75 degreesC, the single ethanol fuel cell with Pt3Sn2/C as anode catalyst showed a comparable performance to that with Pt2Sn1/C, but at higher temperature of 90 degreesC, the latter presented much better performance. It is thought from a practical point of view that Pt2Sn1/C, supplying sufficient -OHads and having adequate active Pt sites and acceptable ohmic effect, could be the appropriate anode catalyst for DEFC. (C) 2003 Elsevier B.V. All rights reserved.

Structure and acidity of Mo/H-MCM-22 catalysts studied by NMR spectroscopy

A comprehensive study on physical and chemical properties of Mo/MCM-22 bifunctional catalysts has been made by using combined analytic and spectroscopic techniques, such as adsorption, elemental analysis, and Xe-129 and P-31 NMR of adsorbed trialkylphosphine oxide probe molecules. Samples prepared by the impregnation method with Mo loadings ranging from 2-10 wt.% have been examined and the results are compared with that obtained from samples prepared by mechanical mixing using MoO3 or Mo2C as agents. Sample calcination treatment is essential in achieving a well-dispersed metal species in Mo/MCM-22. It was found that, upon initial incorporation, the Mo species tend to inactivate both Bronsted and Lewis sites locate predominantly in the supercages rather than the 10-membered ring channels of MCM-22. However, as the Mo loading exceeds 6 wt.%, the excessive Mo species tend to migrate toward extracrystalline surfaces of the catalyst. A consistent decrease in concentrations of acid sites with increasing Mo loading < 6 wt.% was found, especially for those with higher acid strengths. Upon loading of Mo > 6 wt.%, further decreases in both Bronsted and Lewis acidities were observed. These results provide crucial supports for interpreting the peculiar behaviors previously observed during the conversion of methane to benzene over Mo/MCM-22 catalyst under non-oxidative conditions, in which an optimal performance was achieved with a Mo loading of 6 wt.%. The effects of Mo incorporation on porosity and acidity features of the catalyst are discussed. (C) 2004 Published by Elsevier B.V.

A strategy for synthesis of ion-bonded amphiphilic miktoarm star copolymers via supramolecular macro-RAFT agent

Amphiphilic supramolecular miktoarm star copolymers linked by ionic bonds with controlled molecular weight and low polydispersity have been successfully synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization using an ion-bonded macromolecular RAFT agent (macro-RAFT agent). Firstly, a new tetrafunctional initiator, dimethyl 4,6-bis(bromomethyl)-isophthalate, was synthesized and used as an initiator for atom transfer radical polymerization (ATRP) of styrene to form polystyrene (PSt) containing two ester groups at the middle of polymer chain. Then, the ester groups were converted into tertiary amino groups and the ion-bonded supramolecular macro-RAFT agent was obtained through the interaction between the tertiary amino group and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid (DMP). Finally, ion-bonded amphiphilic miktoarm star copolymer, (PSt)(2)-poly(N-isopropyl-acrylamide)(2), was prepared by RAFT polymerization of N-isopropylacrylamide (NIPAM) in the presence of the supramolecular macro-RAFT agent. The polymerization kinetics was investigated and the molecular weight and the architecture of the resulting star polymers were characterized by means of H-1-NMR, FTIR, and GPC techniques. (c) 2008 Wiley Periodicals, Inc.

One-step preparation of hybrid materials of polyacrylamide networks and gold nanoparticles

Hybrid materials of polyacrylamide networks and gold nanoparticles were prepared by directly heating an aqueous solution containing HAuCl4, acrylamide, N,N'-methylenebisacrylamide, and sodium sulfite (Na2SO3). Acrylamide, N,N'-methylenebisacrylamide, and Na2SO3 were used as monomers, crosslinking agent, and initiator, respectively.

Preparation of nanoparticles of bipyridineruthenium and silicotungstate and application as electrochemiluminescence sensor

The novel nanoparticles, [Ru(bPY)(3)](2)SiW12O40 center dot 2H(2)O(2) were firstly synthesized and characterized by elemental analysis, IR, and TEM. The nanoparticles were used to fabricate a chemically modified carbon paste electrode (CPE) by dispersing nanoparticles and graphite powder in silicone grease. Thus-prepared CPE shows bifunctional electrocatalytic activities towards the reduction of nitrite and the oxidation of oxalate, and exhibits sensitive electrochemiluminescence (ECL).

Design and synthesis of near-IR luminescent mesoporous materials covalently linked with tris(8-hydroxyquinolinate) lanthanide(III) complexes

By using the bifunctional ligand, 8-hydroxyquinoline-functionalized organosilane (Q-Si), the new mesoporous material Q-MCM-41 covalently bonded with 8-hydroxyquinoline was synthesized. Through the ligand exchange reaction, the new near-infrared (NIR) luminescent mesoporous LnQ(3)-MCM-41 (Ln = Er, Nd, Yb) materials were prepared by linking the lanthanide quinolinate complexes to the ordered mesoporous Q-MCM-41 material. The LnQ(3)-MCM-41 materials were characterized by powder X-ray diffraction and N-2 adsorption/desorption, and they all show the characteristic mesoporous structure of MCM-41 with highly uniform pore size distributions.