Avaliação de métodos eletromagnéticos aplicando campos polarizados e focalizados

Em investigações geofísicas rasas que empregam os métodos eletromagnéticos indutivos mais avançados, alvos com baixo número de indução (Low Induction Number – LIN) produzem anomalias eletromagnéticas muito baixas e de difícil interpretação. Para suprir esta deficiência, neste trabalho são estudados a aplicabilidade de campos eletromagnéticos polarizados e focalizados – POLFOCEM como fonte primária de indução. Os campos E.M. focalizados e polarizados, vertical e horizontalmente, são obtidos pelas combinações vetoriais de pares de dipolos transmissores e, ocorrem na região central entre eles. A focalização é observada nesta região na profundidade de 0,25 do espaçamento entre esses transmissores – L. Portanto, máximos acoplamentos podem ser obtidos através da seleção da polarização de acordo com a geometria do alvo, ocorrendo um aumento na densidade de fluxo magnético sobre ele e, máximas anomalias produzidas. É utilizada uma metodologia numérica para o cômputo dessas anomalias por meio da técnica dos elementos finitos para solução do problema 2,5-D. Em todos os experimentos numéricos são realizadas comparações qualitativas e quantitativas entre as respostas obtidas pelos sistemas POLFOCEM e convencional, o qual emprega um único dipolo como transmissor (dipolo-dipolo). As anomalias produzidas pelo sistema POLFOCEM, em que os dipolos transmissores são acionados simultaneamente, correspondem à soma das anomalias produzidas por cada um desses dipolos independentes, caracterizando, desta forma, a linearidade dos campos eletromagnéticos. Os experimentos numéricos são realizados para alvos prismáticos bidimensionais com três diferentes inclinações, inseridos num semi-espaço resistivo, e para as freqüências das fontes na faixa das ondas de rádio. As anomalias assimétricas no sistema convencional, que se tornam simétricas no sistema POLFOCEM, apresentam valores menores em amplitude. Contudo, aquelas anomalias tanto assimétricas quanto simétricas que se tornam anti-simétricas apresentam valores maiores. Em decorrência dessas diminuições e aumentos nas amplitudes ocorrem rotações nos diagramas de Argand, no sentido horário e anti-horário para alvos com baixos valores de condutividade, respectivamente. Em experimentos de identificação de presença de dois alvos próximos, o sistema convencional é capaz de identificá-los primeiramente, prevalecendo o seu uso.

Migração com amplitude verdadeira em meios com gradiente constante de velocidade

Este trabalho tem por objetivo a aplicação de um método de migração com amplitudes verdadeiras, considerando-se um meio acústico onde a velocidade de propagação varia linearmente com a profundidade. O método de migração é baseado na teoria dos raios e na integral de migração de Kirchhoff, procurando posicionar de forma correta os refletores e recuperar os respetivos coeficientes de reflexão. No processo de recuperação dos coeficientes de reflexão, busca-se corrigir o fator de espalhamento geométrico de reflexões sísmicas primárias, sem o conhecimento a priori dos refletores procurados. Ao considerar-se configurações fonte-receptor arbitrárias, as reflexões primárias podem ser imageadas no tempo ou profundidade, sendo as amplitudes do campo de ondas migrado uma medida dos coeficientes de reflexão (função do ângulo de incidência). Anteriormente têm sido propostos alguns algoritmos baseados na aproximação de Born ou Kirchhoff. Todos são dados em forma de um operador integral de empilhamento de difrações, que são aplicados à entrada dos dados sísmicos. O resultado é uma seção sísmica migrada, onde cada ponto de reflexão é imageado com uma amplitude proporcional ao coeficiente de reflexão no ponto. No presente caso, o processo de migração faz uso de um modelo com velocidade que apresenta uma distribuição que varia linearmente com a profundidade, conhecido também como gradiente constante de velocidade. O esquema de migração corresponde a uma versão modificada da migração de empilhamento por difração e faz uso explícito da teoria do raio, por exemplo, na descrição de tempos de trânsito e amplitudes das reflexões primárias, com as quais a operação de empilhamento e suas propriedades podem ser entendidas geometricamente. Efeitos como o espalhamento geométrico devido à trajetória do raio levam a distorção das amplitudes. Estes efeitos têm que ser corregidos durante o processamento dos dados sísmicos. Baseados na integral de migração de Kirchhoff e na teoria paraxial dos raios, foi derivada a função peso e o operador da integral por empilhamento de difrações para um modelo sísmico 2,5-D, e aplicado a uma serie de dados sintéticos em ambientes com ruído e livre de ruído. O resultado mostra a precisão e estabilidade do método de migração em um meio 2,5-D como ferramenta para obter informação sobre as propriedades de refletividade da subsuperfície da terra. Neste método não são levados em consideração a existência de caústicas nem a atenuação devido a fricção interna.

Alternative methods for detecting soybean seeds genetically modified for resistance to herbicide glyphosate

The objective of this study was to verify application of two methodologies: substrate moistened with herbicide solution (SM) and immersion of seeds in herbicide solution (IH) for detecting soybean seeds genetically modified. For this, non-transgenic and transgenic soybean seeds, harvested in the 2008/2009 crop seasons were used. The treatments with substrate moistened were: SM1) 0.03% herbicide solution, at 25 ºC, with evaluation in the sixth day (hs -0.03% -25 ºC, 6th d); SM2) HS -0.03% -35 ºC, 5th d; SM3) HS -0.03% - 40 ºC, 5th d; and SM4) hs -0.06% -5 ºC, 5th d. In the methodology of immersion of seeds the following treatments were performed: IH1) seed immersion in a 0.6% herbicide solution, at 25 ºC, for 1 h, (si -0.06% -25 ºC, 1 h; IH2) si -0.06% - 35 ºC, 30 min.; IH3) si -0.06% -40 ºC, 30 min.; IH4) si -0.12% -35 ºC, 30 min.; and IH5) si -0.12% -40 ºC, 30 min. Bioassays allow detecting soybean seeds tolerant to glyphosate herbicide within five days. The seeds of non-genetically modified and genetically modified soybean cultivars may be easily distinguished through the treatments SM2 and SM4 of the moistened substrate methodology; and treatments IH3, IH4, and IH5 of seed immersion methodology. Both methodologies are easily feasible, practical, and applicable in seed analysis laboratories, once do not require special equipments.

Inducing ovulation early postpartum influences uterine health and fertility in dairy cows

The objective of the current study was to evaluate the effect of GnRH early postpartum on induction of ovulation, uterine health, and fertility in dairy cows. Holstein cows without a corpus luteum (CL) at 17 +/- 3 DIM were assigned randomly to receive i.m. GnRH (n = 245) at 17 +/- 3 and 20 +/- 3 DIM or remain as controls (n = 245). Ovaries were scanned by ultrasonography twice weekly totaling 4 examinations. Ovulation was characterized by the appearance of a CL >= 20 mm at any ultrasound or CL <20 mm in 2 consecutive examinations. Clinical and cytological endometritis were diagnosed at 35 DIM. Compared with control, GnRH increased ovulation up to 3.5 d after the last treatment (78.7 vs. 45.0%) and did not affect the prevalence of clinical endometritis (23.9 vs. 18.6%) or cytological endometritis (30.9 vs. 32.8%). Prevalence of clinical endometritis increased in cows that had calving problems (32.6 vs. 15.9%) and metritis (40.6 vs. 15.8%). Metritis increased prevalence of cytological endometritis (50.7 vs. 23.5%). Treatment with GnRH did not affect pregnancy per artificial insemination at 32 (37.6 vs. 38.6%) or 74 d after artificial insemination (35.0 vs. 31.5%), but reduced pregnancy loss (6.8 vs. 18.1%). No overall effect of GnRH treatment on hazard of pregnancy was observed; however, an interaction between GnRH treatment and ovulation showed that GnRH-treated cows that ovulated had increased hazard of pregnancy by 300 DIM compared with GnRH-treated and control cows that did not ovulate (hazard ratio = 2.0 and 1.3, respectively), but similar to control cows that ovulated (hazard ratio = 1.1). Gonadotropin-releasing hormone early postpartiim induced ovulation without affecting uterine health, but failed to improve pregnancy per artificial insemination or time to pregnancy, although it reduced pregnancy loss.

Effect of follicle age on conception rate in beef heifers

The objective of this study was to determine the effect of age of the ovulatory follicle on fertility in beef heifers. Ovulation was synchronized with the 5 d CO-Synch + controlled intravaginal drug release (CIDR) program in heifers in Montana (MT; n = 162, Hereford and Angus Crossbred) and Ohio (OH; n = 170, Angus Crossbred). All heifers received estradiol benzoate (EB; 1 mg/500 kg BW, [i.m.]) 6 d after the final GnRH of the synchronization program to induce follicular atresia and emergence of a new follicular wave (NFW) followed by prostaglandin F2 alpha (PGF(2 alpha); 25 mg, i.m.) administration either 5 d (young follicle [YF]; n = 158) or 9 d (mature follicle [MF]; n = 174) after EB. Estrous detection was performed for 5 d after PGF(2 alpha) with AI approximately 12 h after onset of estrus. Ovarian ultrasonography (MT location only) was performed in YF and MF at EB, 5 d after EB, PGF(2 alpha), and AI. Heifers in MT (n = 20) and OH (n = 18) that were not presynchronized or did not initiate a NFW were excluded from further analyses, resulting in 142 and 152 heifers in MT and OH, respectively. Heifers from the MF treatment in MT that initiated a second NFW after EB but before PGF(2 alpha) (MF2; n = 14) were excluded from the primary analysis. In the secondary analysis, the MF2 group was compared to MF and YF treatments in MT. Estrous response was similar (90%; 252/280) between treatments and locations. Proestrus interval (from PGF(2 alpha) to estrus) and age of the ovulatory follicle at AI were similar for MF heifers between locations (54.6 +/- 1.7 h and 8.3 +/- 0.07 h) but were greater (P < 0.01) for YF heifers in OH (78.5 +/- 1.4 h and 5.3 +/- 0.06 h) than MT (67.4 +/- 1.6 h and 4.8 +/- 0.06 h; treatment x location, P < 0.01). However, conception rate did not differ for MF (63.8%; 74/116) and YF (67.0%; 91/136) treatments. In the MT heifers, follicle size and follicle age atAI in the YF treatment (10.4 +/- 0.15 mm and 4.8 +/- 0.06 d, respectively) was less (P < 0.01) than in the MF treatment (11.0 +/- 0.18 mm and 8.3 +/- 0.11 d, respectively), but conception rate to AI did not differ between treatments in MT. In the MF2 group proestrus interval was greater (P < 0.01); hence, diameter of the ovulatory follicle and age were similar to that for the YF treatment. Conception rate to AI did not differ between MF2, MF, and YF (61.5, 63.3, and 64.7%, respectively) in MT. In conclusion, manipulation of age of the nonpersistent ovulatory follicle at spontaneous ovulation did not influence conception rate.

The effect of follicle age on pregnancy rate in beef cows

The effect of the age of the ovulatory follicle on fertility in beef cows was investigated. Multiparous (n = 171) and primiparous (n = 129) postpartum beef cows in 2 groups (G1 and G2) received estradiol benzoate (EB; 1 mg/500 kg BW, intramuscular [i.m.]) 5.5 d (G1; n = 162) and 6.5 d (G2; n = 138) after the final GnRH of a synchronization program (5d CO-Synch + CIDR) to induce emergence of a new follicular wave (NFW), followed by prostaglandin F2 alpha (PGF2 alpha; 25 mg, i.m.) administration either 5.5 d (young follicle, YF; n = 155) or 9.5 d (mature follicle, MF; n = 145) after EB. Estrous detection coupled with AI 12 h later (estrus-AI) was performed for 60 h (MF) and 84 h (YF) after PGF(2 alpha); cows not detected in estrus within this period received timed AI (TAI) coupled with GnRH at 72 and 96 h, respectively. Within the first 72 h after PGF(2 alpha), more (P < 0.01) cows in the MF (76.3%) than YF treatment (47.7%) exhibited estrus, but through 96 h, the proportion detected in estrus (P < 0.05) and interval from PGF(2 alpha) to estrus (P < 0.01) were greater in the YF than MF treatment (88.6% vs. 76.3%, 78.9 +/- 0.8 vs. 57.5 +/- 1.6 h, respectively). Age of the ovulatory follicle at AI was greater (P < 0.01) in the MF (9.32 +/- 0.04 d) than YF (6.26 +/- 0.02 d) treatment, but follicle diameter at AI and pregnancy rates did not differ between MF (13.1 +/- 0.2 mm; 72.0%) and YF (12.9 +/- 0.1 mm; 67.1%) treatments. Regardless of treatment, the diameter of the ovulatory follicle at AI and pregnancy rate were greater (P < 0.01) with estrus-AI (13.1 +/- 0.1 mm; 75.0%) than TAI (12.6 +/- 0.2 mm; 55.4%). Cows in the MF treatment that initiated a second NFW after EB but before PGF(2 alpha) (MF2; n = 47) were induced to ovulate with GnRH and TAI at 72h, when ovulatory follicles were 4 d old and 10.2 +/- 0.2 mm in diameter. Pregnancy rate for TAI (51.1%) in MF2 did not differ from TAI pregnancy rate (55.4%) across the MF and YF treatments. In summary, the age of the ovulatory follicle affected interval to estrus and AI but did not influence pregnancy rate in suckled beef cows.

Post-Embryonic Development in Zaprionus indianus (Diptera: Drosophilidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of air-particle deposition protocols on the surface topography and adhesion of resin cement to zirconia

Objectives: This study evaluated the influence of air-particle abrasion protocols on the surface roughness (SR) of zirconia and the shear bond strength (SBS) of dual-polymerized resin cement to this ceramic. Materials and methods. Sintered zirconia blocks (n = 115) (Lava, 3M ESPE) were embedded in acrylic resin and polished. The specimens were divided according to the 'particle type' (Al: 110 mu m Al2O3; Si: 110 mu m SiO2) and 'pressure' factors (2.5 or 3.5 bar) (n = 3 per group): (a) Control (no air-abrasion); (b) Al2.5; (c) Si2.5; (d) Al3.5; (e) Si3.5. SR (Ra) was measured 3-times from each specimen after 20 s of air-abrasion (distance: 10 mm) using a digital optical profilometer. Surface topography was evaluated under SEM analyses. For the SBS test, 'particle type', 'pressure' and 'thermocycling' (TC) factors were considered (n = 10; n = 10 per group): Control (no air-abrasion); Al2.5; Si2.5; Al3.5; Si3.5; Control(TC); Al2.5(TC); Si2.5(TC); Al3.5(TC); Si3.5(TC). After silane application, resin cement (Panavia F2.0) was bonded and polymerized. Specimens were thermocycled (6.000 cycles, 5-55 degrees C) and subjected to SBS (1 mm/min). Data were analyzed using ANOVA, Tukey's and Dunnett tests (5%). Results. 'Particle' (p = 0.0001) and 'pressure' (p = 0.0001) factors significantly affected the SR. All protocols significantly increased the SR (Al2.5: 0.45 +/- 0.02; Si2.5: 0.39 +/- 0.01; Al3.5: 0.80 +/- 0.01; Si3.5: 0.64 +/- 0.01 mu m) compared to the control group (0.16 +/- 0.01 mu m). For SBS, only 'particle' factor significantly affected the results (p = 0.015). The SiO2 groups presented significantly higher SBS results than Al2O3 (Al2.5: 4.78 +/- 1.86; Si2.5: 7.17 +/- 2.62; Al3.5: 4.97 +/- 3.74; Si3.5: 9.14 +/- 4.09 MPa) and the control group (3.67 +/- 3.0 MPa). All TC specimens presented spontaneous debondings. SEM analysis showed that Al2O3 created damage in zirconia in the form of grooves, different from those observed with SiO2 groups. Conclusions. Air-abrasion with 110 mu m Al2O3 resulted in higher roughness, but air-abrasion protocols with SiO2 promoted better adhesion.

Clostridium perfringens in ingredients of poultry feed and control of contamination by chemical treatments

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crude Glycerin associated with starch or fiber-based energy ingredients at two levels of concentrate for beef cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Endothelial AT(1) and AT(2) pathways in aortic responses to angiotensin II after stress and ethanol consumption in rats

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Energy Requirements in Early Life Are Similar for Male and Female Goat Kids

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Angiotensin converting enzyme polymorphism in type 2 diabetes mellitus

This study was undertaken to assess the frequency of angiotensin converting enzyme (ACE) insertion/deletion (I/D) polymorphism in patients with type 2 diabetes mellitus. A total of 162 patients with type 2 diabetes and 160 individuals without this disease were analyzed. From the diabetes group, 81 patients with cardiovascular risk (according to American Diabetes Association parameters) were selected to form another subgroup. For polymorphism identification, two polymerase chain reactions were performed: one reaction to identify all genotypes and a second one to confirm the presence of the I allele. The observed genotype frequencies were as follows: diabetes group I/I (19.1%), I/D (52.5%), D/D (28.4%); control group I/I (12.5%), I/D (55.6%), D/D (31.9%); and diabetes with cardiovascular risk group I/I (16.0%), I/ D (59.3%), D/D (24.7%). No statistically significant difference was observed between the allelic and genotypic frequencies in the analyzed groups. Previous studies reported an association between the D allele and type 2 diabetes in Caucasian and East Asian populations. However, in mixed populations, such as those found in Brazil, such an association was not found. This fact does not discard the need for more studies on the frequencies of this polymorphism in the Brazilian population and the associations with risk factors, which can compromise the quality of life of diabetes patients

Análises microbiológicas e quantificação de proteína de soja pela metodologia isotípica (δ13C and δ15N) em hambúrgueres bovinos de marcas comerciais brasileiras

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of rumen-protected choline supplementation on metabolic and performance responses of transition dairy cows

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)