Especiação de cobre e zinco em urina: importância dos metais em doenças neurodegenerativas

Metals such as copper and zinc are essential for the development and maintenance of numerous enzymatic activities, mitochondrial functions, neurotransmission, and also for memorization and learning. However, disruption in their homeostasis can cause neurodegenerative disorders such as the Alzheimer and Parkinson diseases. In this work, the speciation of copper and zinc in urine samples was carried out. To this end, free and total metal concentrations were determined by square wave anodic stripping voltammetry using a glassy carbon electrode coated with bismuth film. The digestion of the samples was performed in a microwave with the addition of oxidant reagents.

Celdas solares fotoelectroquímicas basadas en Bi2WO6

In this study, photoelectrochemical solar cells based on bismuth tungstate electrodes were evaluated. Bi2WO6 was synthesized by a hydrothermal method and characterized by scanning electron microscopy, UV-Vis reflectance spectroscopy, and X-ray powder diffraction. For comparison, solar cells based on TiO2 semiconductor electrodes were evaluated. Photoelectrochemical response of Grätzel-type solar cells based on these semiconductors and their corresponding sensitization with two inexpensive phthalocyanines dyes were determined. Bi2WO6-based solar cells presented higher values of photocurrent and efficiency than those obtained with TiO2 electrodes, even without sensitization. These results portray solar cells based on Bi2WO6 as promising devices for solar energy conversion owing to lower cost of production and ease of acquisition.

INFLUÊNCIA DO TRATAMENTO TÉRMICO NO NANOCOMPÓSITO FOTOCATALISADOR ZnO/TiO2

ZnO/TiO2 nanocomposites were prepared by impregnating zinc acetate dihydrate on the surface of titanium dioxide P25, followed by thermal treatment at 350, 600, 750, and 900 °C, in order to investigate the TiO2 phase and titanate formation and the role of the latter in the photocatalytic activity of the nanocomposite. In the nanocomposites, the anatase-to-rutile transition is favored due to the presence of Zn2+, and the conversion is nearly complete at 750 °C. The presence of zinc metatitanate in the sample heated at 600 °C had no significant effect on the nanocomposite photocatalytic activity.

Effects of interband and intraband impurity scattering on coherence length in the pnictide superconductors

After discovery of cuprates, a search for new high temperature superconducting families began and it led to the discovery of layered pnictide compounds with critical temperatures limited up to ∼56 K. Pnictides consist elements from Group V of Periodic Table (nitrogen, phosphorus, arsenic, antimony and bismuth). In this work coherence length h in mixed state of pnictide superconductors is calculated numerically. In calculation is taken into account interband and intraband impurity scattering in framework of quasiclassical Eilenberger theory for s± pairing symmetry. Differences between Ginzburg-Landau and Eilenberger theories is shown and the comparison with existing models is done.

Effects of interband and intraband impurity scattering on coherence length in the pnictide superconductors

After discovery of cuprates, a search for new high temperature superconducting families began and it led to the discovery of layered pnictide compounds with critical temperatures limited up to ~56 K. Pnictides consist elements from Group V of Periodic Table (nitrogen, phosphorus, arsenic, antimony and bismuth). In this work coherence length ξh in mixed state of pnictide superconductors is calculated numerically. In calculation is taken into account interband and intraband impurity scattering in framework of quasiclassical Eilenberger theory for s± pairing symmetry. Differences between Ginzburg-Landau and Eilenberger theories is shown and the comparison with existing models is done.

Derivação hepaticojejunal sem sutura: uma alternativa para reconstituição da via biliar

A lesão das vias biliares foi observada em dois pacientes submetidos à colecistectomia videolaparoscópica e convencional. Para reconstituição da via biliar foi aplicada a técnica hepaticojejunostomia em Y-de-Roux com a introdução dao segmento proximal do ducto hepático comum, apoiada por um catéter perdido na luz da alça exclusa, sem sutura. O grau das lesões segundo a classificação de Bismuth tomou a técnica exeqüível. No período de nov/94 a fev/97 os casos evoluíram clinicamente assintomáticos e com exames laboratoriais dentro dos padrões de normalidade. O controle ultra-sonográfico demonstra a presença do catéter simulando o colédoco. A boa evolução dos casos não nos autoriza a conclusões definitivas. A facilidade técnica e a baixa morbidade no pós-operatório nos motivaram a escrever este artigo.

Tratamento cirúrgico das estenoses da via biliar

OBJETIVO: As estenoses benignas da via biliar (EBVB) decorrem de lesões iatrogênicas em 95% casos. Embora pouco freqüentes seu prognóstico é sombrio, e a prevenção é o melhor tratamento. O objetivo deste trabalho é estudar a conduta cirúrgica nas EBVB e seus resultados. MÉTODO: Foram analisados retrospectivamente, 11 pacientes submetidos à correção de EBVB no Hospital Universitário Regional do Norte do Paraná (HURNP) no período de Julho/1992 a Dezembro/2001. RESULTADOS: Nove pacientes eram do sexo feminino e dois do masculino,com média de idade de 43,71 (± 17,05) anos. A cirurgia que originou a lesão foi colecistectomia aberta em 81,8% dos pacientes e por laparoscopia em 18,2%. Os sinais e sintomas mais freqüentes foram icterícia (64,3%), dor (64,3%), e febre (21,4%). O diagnóstico foi confirmado por colangiopancreatografia retrógrada endoscópica (CPRE) em 90,9% dos casos e por colangiografia transparieto- hepática (CTPH) em 9,1%. Segundo os critérios de Bismuth lesões do tipo I ocorreram em 18,2% dos casos, tipo II em 45,4%, tipo III em 18,2% e tipo IV em 18,2%. O tratamento cirúrgico para as EBVB foi anastomose colédoco-duodenal, anastomose hepático-jejunal em Y de Roux , anastomose hepático-jejunal à Hepp- Couinaud e anastomose hepático-jejunal com enxertia de mucosa (Smith), para as lesões tipo I,II,III e IV, respectivamente. Seis (54,55%) pacientes apresentaram complicações pós-operatórias , e dois (18,2%) evoluíram para óbito CONCLUSÕES: As correções cirúrgicas das EBVB apresentam altos índices de complicações e devem ser realizadas em centros especializados. Em geral estas estenoses decorrem de lesões iatrogênicas durante colecistectomias.

Battery Cell Modeling for Battery Management System

Usage of batteries as energy storage is emerging in automotive and mobile working machine applications in future. When battery systems become larger, battery management becomes an essential part of the application concerning fault situations of the battery and safety of the user. A properly designed battery management system extends one charge cycle of battery pack and the whole life time of the battery pack. In this thesis main objectives and principles of BMS are studied and first order Thevenin’s model of the lithium-titanate battery cell is built based on laboratory measurements. The battery cell model is then verified by comparing the battery cell model and the actual battery cell and its suitability for use in BMS is studied.

A influência do tempo de referencia no tratamento das lesões iatrogênicas da via biliar

OBJETIVO: Avaliar o prognóstico dos pacientes com lesão iatrogênica da via biliar (LIVB) em relação ao tempo de referencia (TR) para a unidade de transplante hepático (TH). MÉTODOS: Foram revisados 51 prontuários de pacientes que sofreram algum tipo de LIVB durante a colecistectomia e que foram encaminhados para a unidade de TH no Hospital Geral de Bonsucesso (HGB). As lesões foram agrupadas de acordo com a classificação de Bismuth. Além da colecistectomia (momento da lesão), também avaliamos o TR e o desfecho. RESULTADOS: Dentre os 51 pacientes estudados encontramos 17 homens e 34 mulheres com uma média de idade de 42,7 anos. Vinte e dois pacientes (43,1%) tinham uma lesão do tipo II; 13 (25,5 %) do tipo III; 10 (19,6 %) do tipo I, 5 (9,8 %) do tipo IV; e apenas um (2 %) do tipo V. Quarenta pacientes foram operados, sendo que três não retornaram para revisão médica e portanto, 37 foram avaliados em relação ao desfecho. Dentre esses, 25 pacientes (67,6 %) tiveram resultados excelentes ou bons com TR médio de 11,5 meses (intervalo: 2-48 meses) e 47,2 meses (intervalo: 3-180 meses) respectivamente. Os 12 pacientes (32,4 %) com resultados ruins tiveram um TR médio de 65,9 meses (intervalo: 3-264 meses), que foi significativamente maior do que o grupo com resultados excelentes ou bons (p=0,004). Sete pacientes foram listadas para fila de TH, porém apenas dois foram realizados. O TR desses sete pacientes foi significativamente mais elevado (p=0,04) do que o daqueles pacientes não listados. Sete pacientes morreram, dos quais seis foram causados por complicações hepáticas. CONCLUSÃO: O TR influenciou significativamente no prognóstico dos pacientes da nossa amostra.

Efficacy of a quadruple therapy regimen for Helicobacter pylori eradication after partial gastrectomy

We aimed to evaluate the effectiveness and safety of bismuth-containing quadruple therapy plus postural change after dosing for Helicobacter pylori eradication in gastrectomized patients. We compared 76 gastric stump patients with H. pylori infection (GS group) with 50 non-gastrectomized H. pylori-positive patients who met the treatment indication (controls). The GS group was divided into GS group 1 and GS group 2. All groups were administered bismuth potassium citrate (220 mg), esomeprazole (20 mg), amoxicillin (1.0 g), and furazolidone (100 mg) twice daily for 14 days. GS group 1 maintained a left lateral horizontal position for 30 min after dosing. H. pylori was detected using rapid urease testing and histologic examination of gastric mucosa before and 3 months after therapy. Mucosal histologic manifestations were evaluated using visual analog scales of the updated Sydney System. GS group 1 had a higher prevalence of eradication than the GS group 2 (intention-to-treat [ITT]: P=0.025; per-protocol [PP]: P=0.030), and the control group had a similar prevalence. GS group 2 had a lower prevalence of eradication than controls (ITT: P=0.006; PP: P=0.626). Scores for chronic inflammation and activity declined significantly (P<0.001) 3 months after treatment, whereas those for atrophy and intestinal metaplasia showed no significant change. Prevalence of adverse reactions was similar among groups during therapy (P=0.939). A bismuth-containing quadruple therapy regimen plus postural change after dosing appears to be a relatively safe, effective, economical, and practical method for H. pylori eradication in gastrectomized patients.

Synthesis and characterization of nanoperforated metal oxide thin films

For advanced devices in the application fields of data storage, solar cell and biosensing, one of the major challenges to achieve high efficiency is the fabrication of nanopatterned metal oxide surfaces. Such surfaces often require both precise structure at the nanometer scale and controllable patterned structure at the macro scale. Nowadays, the dominating candidates to fabricate nanopatterned surfaces are the lithographic technique and block-copolymer masks, most of which are unfortunately costly and inefficient. An alternative bottom-up approach, which involves organic/inorganic self-assembly and dip-coating deposition, has been studied intensively in recent years and has proven to be an effective technique for the fabrication of nanoperforated metal oxide thin films. The overall objective of this work was to optimize the synthesis conditions of nanoperforated TiO2 (NP-TiO2) thin films, especially to be compatible with mixed metal oxide systems. Another goal was to develop fabrication and processing of NP-TiO2 thin films towards largescale production and seek new applications for solar cells and biosensing. Besides the traditional dip-coating and drop-casting methods, inkjet printing was used to prepare thin films of metal oxides, with the advantage of depositing the ink onto target areas, further enabling cost-effective fabrication of micro-patterned nanoperforated metal oxide thin films. The films were characterized by water contact angle determination, Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Grazing Incidence XRay Diffraction. In this study, well-ordered zinc titanate nanoperforated thin films with different Zn/Ti ratios were produced successfully with zinc precursor content up to 50 mol%, and the dominating phase was Zn2Ti3O8. NP-TiO2 structures were also obtained by a cost-efficient means, namely inkjet printing, at both ambient temperature and 60 °C. To further explore new biosensing applications of nanoperforated oxide thin films, inkjet printing was used for the fabrication of both continuous and patterned polymeric films onto NP-TiO2 and perfluorinated phosphate functionalized NP-TiO2 substrates, respectively. The NP-TiO2 films can be also functionalized with a fluoroalkylsilane, resulting in hydrophobic surfaces on both titania and silica. The surface energy contrast in the nanoperforations can be tuned by irradiating the films with UV light, which provides ideal model systems for wettability studies.

Etude spectroscopique d’un plasma micro-onde à la pression atmosphérique et son application à la synthèse de nanostructures

L’objectif de ce mémoire de maîtrise est de caractériser la distribution axiale des plasmas tubulaires à la pression atmosphérique créés et entretenus par une onde électromagnétique de surface ainsi que d’explorer le potentiel de ces sources pour la synthèse de matériaux et de nanomatériaux. Un précédent travail de thèse, qui avait pour objectif de déterminer les mécanismes à l’origine de la contraction radiale du plasma créé dans des gaz rares, a mis en lumière un phénomène jusque-là inconnu dans les plasmas d’onde de surface (POS). En effet, la distribution axiale varie différemment selon la puissance incidente ce qui constitue une différence majeure par rapport aux plasmas à pression réduite. Dans ce contexte, nous avons réalisé une étude paramétrique des POS à la pression atmosphérique dans l’Ar. À partir de nos mesures de densité électronique, de température d’excitation et de densité d’atomes d’Ar dans un niveau métastable (Ar 3P2), résolues axialement, nous avons conclu que le comportement axial de l’intensité lumineuse avec la puissance n’est pas lié à un changement de la cinétique de la décharge (qui est dépendante de la température des électrons et de la densité d’atomes d’Ar métastables), mais plutôt à une distribution anormale de dissipation de puissance dans le plasma (reliée à la densité d’électrons). Plus précisément, nos résultats suggèrent que ce dépôt anormal de puissance provient d’une réflexion de l’onde dans le fort gradient de densité de charges en fin de colonne, un effet plus marqué pour de faibles longueurs de colonnes à plasma. Ensuite, nous avons effectué une étude spectroscopique du plasma en présence de précurseurs organiques, en particulier le HMDSO pour la synthèse de matériaux organosiliciés et l’IPT pour la synthèse de matériaux organotitaniques. Les POS à la PA sont caractérisés par des densités de charges très élevées (>10^13 cm^-3), permettant ainsi d’atteindre des degrés de dissociation des précurseurs nettement plus élevés que ceux d'autres plasmas froids à la pression atmosphérique comme les décharges à barrière diélectrique. Dans de tels cas, les matériaux synthétisés prennent la forme de nanopoudres organiques de taille inférieure à 100 nm. En présence de faibles quantités d’oxygène dans le plasma, nous obtenons plutôt des nanopoudres à base d’oxyde de silicium (HMDSO) ou à base de titanate de silicium (IPT), avec très peu de carbone.

Synthèse d’un inhibiteur de la rénine, l’aliskiren et développement de méthodes catalytiques d’alkylation asymétrique

Une nouvelle approche pour la synthèse de l’aliskiren, un puissant inhibiteur de la rénine pour le traitement de l’hypertension chez l’homme, a été développée. De cette approche, des étapes clés tels qu’une allylation avec un des catalyseurs de MacMillan, une cyclisation par métathèse (RCM) pour la préparation d’une lactone à neuf membres et une séquence de réactions d’aziridination diastéréosélective/réarrangement de cycle par une catalyse acide donnant un produit aminohydroxylé ont permis de compléter la synthèse de l’aliskiren en 11 étapes. Durant l’élaboration de la séquence de réactions pour la préparation de l’aliksiren, il a été noté que la lactone à neuf membres avait une facilité à se réarranger via des intermédiaires quinonoïdaux et les produits issus de cette tendance ont été analysés. De plus, une étude sur la réaction de RCM, donnant la lactone à neuf membres, a montré une dépendance envers la nature diastéréomérique du substrat de départ. Une méthodologie d’alpha-allylation asymétrique de cétones catalysée au palladium, tirant avantage d’un ligand chiral PHOX, a été explorée et utilisée en vue de la synthèse de l’aliskiren. De cette méthode, une étude pour la synthèse de produits alpha-allylcétones acycliques a été démontrée et un effet d’additif sur la sélectivité et la vitesse de réaction a été découvert. De plus, la production d’un intermédiaire avancé d’un produit d’intérêts a été accomplie et la nature de la contribution de l’additif a été investiguée. Les produits obtenus depuis la méthodologie d’allylation catalysée au palladium et la formation d’intermédiaire cationique des certains dérivés de la synthèse de l’aliskiren ont inspirés une nouvelle approche faisant appel à des techniques d’alkylation en catalyse acide pour la formation de produits diaryliques. Il a été trouvé que le catalyseur de chlorure d’or(III) et de triflate de bismuth(III) étaient particulièrement efficaces, démontrant une différence de cinétique pour la réactivité d’un mélange diastéréoisomériques d’alcools alpha-substitués de départ.

Tailoring the microwave dielectric properties of BaRE2Ti4O12 and BaRE2Ti5O14 ceramics bycompositional variations

Ceramic dielectric resonators in the BaO-RE2O3-TiO2 (RE=rare earth) system have been prepared by the conventional solid state ceramic route. The dielectric properties have been tailored by substitution of different rare earth oxides and by bismuth oxide addition. The dielectric constants increased with Bi addition whereas the Q decreased. The temperature coeffecient of the resonant frequency improved with bismuth addition.

Preparation, Characterization and Dilectric Properties of Ceramics in the BaO-Nd2O3-TiO2 System

The dielectric ceramics BaNd2Ti3Oto, BaNd2Ti4O12 and BaNd2Ti5O14 have been prepared by Conventional solid state ceramic route. The sintered ceramic samples have been characterized by X-ray diffraction and Scanning Electron Microscopy (SEM). The dielectric properties in the microwave frequency range have been measured using conventional microwave dielectric resonator methods. The BaNd2Ti1O10, BaN2Ti4O12 and BaNd2Ti5O14 have dielectric constants (Er) ~ 60, 84 and 77 respectively. They have relatively high quality factors