Influence of the 23 October 2002 dust storm on the air quality of four Australian cities

Widespread drought and record maximum temperatures in eastern Australia produced a large dust storm on 23 October, 2002 which traversed a large proportion of eastern Australia and engulfed communities along a 2000 km stretch of coastline from south of Sydney ( NSW) to north of Mackay ( Queensland). This event provided an opportunity for a study of the impacts of rural dust upon the air quality of four Australian cities. A simple model is used to predict dust concentrations, dust deposition rates and particle size characteristics of the airborne dust in the cities. The total dust load of the plume was 3.35 to 4.85 million tones, and assuming a ( conservative) plume height of 1500 m, 62 - 90% of this dust load was deposited in-transit to the coast. It is conservatively estimated that 3.5, 12.0, 2.1 and 1.7 kilotonnes of dust were deposited during the event in Sydney, Brisbane, Gladstone and Mackay, respectively. In the South East Queensland region, this deposition is equivalent to 40% of the total annual TSP emissions for the region. The event increased TSP, PM10 and PM2.5 concentrations and reduced the visibility beyond the health and amenity guidelines in the four cities. For example, the 24-h average PM10 concentrations in Brisbane and Mackay, were 161 and 475 mu g m(-3) respectively, compared with the Australian national ambient air quality standard of 50 mu g m(-3). The 24-h average PM2.5 concentration in Brisbane was 42 mu g m(-3), compared with the national advisory standard of 25 mu g m(-3). These rural dusts significantly increased PM10/TSP ratios and decreased PM2.5/PM10 ratios, indicating that most of the particles were between PM2.5 and PM10.

Attaching unit costs to Australia's National Survey of Mental Health and Wellbeing

Background: In mental health, policy-makers and planners are increasingly being asked to set priorities. This means that health economists, health services researchers and clinical investigators are being called upon to work together to define and measure costs. Typically, these researchers take available service utilisation data and convert them to costs, using a range of assumptions. There are inefficiencies, as individual groups of researchers frequently repeat essentially similar exercises in achieving this end. There are clearly areas where shared or common investment in the development of statistical software syntax, analytical frameworks and other resources could maximise the use of data. Aims of the Study: This paper reports on an Australian project in which we calculated unit costs for mental health admissions and community encounters. In reporting on these calculations, our purpose is to make the data and the resources associated with them publicly available to researchers interested in conducting economic analyses, and allow them to copy, distribute and modify them, providing that all copies and modifications are available under the same terms and conditions (i.e., in accordance with the 'Copyleft' principle), Within this context, the objectives of the paper are to: (i) introduce the 'Copyleft' principle; (ii) provide an overview of the methodology we employed to derive the unit costs; (iii) present the unit costs themselves; and (iv) examine the total and mean costs for a range of single and comorbid conditions, as an example of the kind of question that the unit cost data can be used to address. Method: We took relevant data from the Australian National Survey of Mental Health and Wellbeing (NSMHWB), and developed a set of unit costs for inpatient and community encounters. We then examined total and mean costs for a range of single and comorbid conditions. Results: We present the unit costs for mental health admissions and mental health community contacts. Our example, which explored the association between comorbidity and total and mean costs, suggested that comorbidly occurring conditions cost more than conditions which occur on their own. Discussion: Our unit costs, and the materials associated with them, have been published in a freely available form governed by a provision termed 'Copyleft'. They provide a valuable resource for researchers wanting to explore economic questions in mental health. Implications for Health Policies: Our unit costs provide an important resource to inform economic debate in mental health in Australia, particularly in the area of priority-setting. In the past, such debate has largely, been based on opinion. Our unit costs provide the underpinning to strengthen the evidence-base of this debate. Implications for Further Research: We would encourage other Australian researchers to make use of our unit costs in order to foster comparability across studies. We would also encourage Australian and international researchers to adopt the 'Copyleft' principle in equivalent circumstances. Furthermore, we suggest that the provision of 'Copyleft'-contingent funding to support the development of enabling resources for researchers should be considered in the planning of future large-scale collaborative survey work, both in Australia and overseas.

A qualitative study of selected fourth -grade teachers' perceptions of the Sunshine State Standards

Despite a history of grappling with educational standards, never before has the federal government attempted to establish explicit national standards for what American children should learn in school. Recently, U.S. educators have developed voluntary national content standards, or explicit expectations of what students should know and be able to do. Not surprisingly, this major curriculum reform has provoked considerable debate. Today, teachers face difficult challenges working towards the implementation of standards. The objective of this study was to describe and explain the perceptions of a selected team of fourth-grade teachers regarding the language arts component of their state's Sunshine State Standards (SSS). The exploratory questions that guided this qualitative study were: (a) How are the SSS perceived by these fourth-grade teachers? (b) In what ways do the SSS affect teachers' self-perceptions? and, (c) To what extent and how do the SSS affect the participants' professional classroom behavior? ^ Direct observations, interviews, analysis of relevant documents and the researcher's critical reflective journal served as the methods of inquiry employed in this qualitative study. Bandura's Teacher Self-Efficacy Scale was used as a tool to help categorize the data specifically related to self-perception. ^ Analysis of the data suggests that participants perceived the SSS as a useful guideline as they taught. The SSS were a decisive factor in teachers' planning. They were the actual guide lines used by teachers to plan their lessons. However, participants did not believe the SSS were attainable by all students or were fair to students with special needs. They also believed there was not sufficient time allocated for the effective implementation of the SSS. This lack of time created pressure among some of the participants and others even felt disempowered regarding the curriculum and the instructional focus implemented during the test preparation time. The SSS negatively affected the participants when they felt constraints during this time, which led to their inability to carry out important activities in their classrooms. Thus, the SSS directly affected the participants' behavior in their classrooms. ^

Standardizing Minzu: A Content Analysis of the Depiction of Shaoshu Minzu in Three Chinese Elementary Curriculum Standards and Textbooks

Thesis (Ph.D.)--University of Washington, 2016-08

The effect of earlier mating and improving fertility on greenhouse gas emissions intensity of beef production in northern Australian herds

Approximately 5% of Australian national greenhouse gas (GHG) emissions are derived from the northern beef industry. Improving the reproductive performance of cows has been identified as a key target for increasing profitability, and this higher efficiency is also likely to reduce the GHG emissions intensity of beef production. The effects of strategies to increase the fertility of breeding herds and earlier joining of heifers as yearlings were studied on two properties at Longreach and Boulia in western Queensland. The beef production, GHG emissions, emissions intensity and profitability were investigated and compared with typical management in the two regions. Overall weaning rates achieved on the two properties were 79% and 74% compared with typical herd weaning rates of 58% in both regions. Herds with high reproductive performance had GHG emissions intensities (t CO2-e t–1 liveweight sold) 28% and 22% lower than the typical herds at Longreach and Boulia, with most of the benefit from higher weaning rates. Farm gross margin analysis showed that it was more profitable, by $62 000 at Longreach and $38 000 at Boulia, to utilise higher reproductive performance to increase the amount of liveweight sold with the same number of adult equivalents compared with reducing the number of adult equivalents to maintain the same level of liveweight sold and claiming a carbon credit for lower farm emissions. These gains achieved at two case study properties which had different rainfall, country types, and property sizes suggest similar improvements can be made on-farm across the Mitchell Grass Downs bioregion of northern Australia.

Effects of exposure to Bovine viral diarrhoea virus 1 on risk of bovine respiratory disease in Australian feedlot cattle

Viruses play a key role in the complex aetiology of bovine respiratory disease (BRD). Bovine viral diarrhoea virus 1 (BVDV-1) is widespread in Australia and has been shown to contribute to BRD occurrence. As part of a prospective longitudinal study on BRD, effects of exposure to BVDV-1 on risk of BRD in Australian feedlot cattle were investigated. A total of 35,160 animals were enrolled at induction (when animals were identified and characteristics recorded), held in feedlot pens with other cattle (cohorts) and monitored for occurrence of BRD over the first 50 days following induction. Biological samples collected from all animals were tested to determine which animals were persistently infected (PI) with BVDV-1. Data obtained from the Australian National Livestock Identification System database were used to determine which groups of animals that were together at the farm of origin and at 28 days prior to induction (and were enrolled in the study) contained a PI animal and hence to identify animals that had probably been exposed to a PI animal prior to induction. Multi-level Bayesian logistic regression models were fitted to estimate the effects of exposure to BVDV-1 on the risk of occurrence of BRD.Although only a total of 85 study animals (0.24%) were identified as being PI with BVDV-1, BVDV-1 was detected on quantitative polymerase chain reaction in 59% of cohorts. The PI animals were at moderately increased risk of BRD (OR 1.9; 95% credible interval 1.0-3.2). Exposure to BVDV-1 in the cohort was also associated with a moderately increased risk of BRD (OR 1.7; 95% credible interval 1.1-2.5) regardless of whether or not a PI animal was identified within the cohort. Additional analyses indicated that a single quantitative real-time PCR test is useful for distinguishing PI animals from transiently infected animals.The results of the study suggest that removal of PI animals and/or vaccination, both before feedlot entry, would reduce the impact of BVDV-1 on BRD risk in cattle in Australian feedlots. Economic assessment of these strategies under Australian conditions is required. © 2016 Elsevier B.V.

Psychosocial job quality in a national sample of working Australians: a comparison of persons working with versus without disability

Objectives: There is growing international policy interest in disability employment, yet there has been little investigation of job quality among people working with disability. This study uses Australian national data to compare the psychosocial job quality of people working with versus without disability. Methods: We used 10 annual waves of data from a large representative Australian panel survey to estimate the proportion of the population experiencing poorer psychosocial job quality (overall and by individual 'adversities' of low job control, high demands, high insecurity, and low fairness of pay) by disability status and impairment type. We used logistic regression to examine the pooled cross-sectional associations between disability and job quality, adjusting for age, sex, education and job type. Results: Those working with any disability showed approximately 25% higher odds of reporting one or more adversity at work (OR: 1.23, 95% CI: 1.15, 1.31), and this finding was consistent across impairment types with the exception of intellectual/developmental disability. Estimates were largely unchanged after adjustments. Similar results were found for reporting two or more adversities compared one or more. Conclusions: We observed that working people with a disability in Australia reported systematically poorer psychosocial job quality than those working without disability. These results suggest the need for further research to understand the reasons for these patterns, as well as policy and practice efforts to address this inequity.

Skill development for innovative procurement environments in construction

The construction industry should be a priority to all governments because it impacts economically and socially on all citizens. Sector turnover in industrialised economies typically averages 8-12% of GDP. Further, construction is critical to economic growth. Recent Australian studies estimate that a 10% gain in efficiency in construction translates to a 2.5% increase in GDP Inefficiencies in the Australian construction industry have been identified by a number of recent studies modelling the building process. They have identified potential savings in time of between 25% and 40% by reducing non-value added steps in the process. A culture of reform is now emerging in the industry – one in which alternate forms of project delivery are being trialed. Government and industry have identified Alliance Contracting as a means to increase efficiency in the construction industry as part of a new innovative procurement environment. Alliance contracting requires parties to form relationships and work cooperatively to provide a more complete service. This is a significant cultural change for the construction industry, with its well-known adversarial record in traditional contracting. Alliance contracts offer enormous potential benefits, but the Australian construction industry needs to develop new skills to effectively participate in the new relationship environment. This paper describes a collaborative project identifying skill needs for clients and construction professionals to more effectively participate in an increasingly sophisticated international procurement environment. The aim of identifying these skill needs is to assist industry, government, and skill developers to prepare the Australian construction workforce for the future. The collaborating Australian team has been fortunate to secure the Australian National Museum in Canberra as its live case study. The Acton Peninsula Development is the first major building development in the world awarded on the basis of a joint alliance contract.

From emotional suppression to regulated empathy : the changing face of control in the CES

Between the 1970s and the 1990s the level and type of emotionality in the Commonwealth Employment Service (the Australian national employment service) altered. Within a context of changing economic conditions and concomitant work intensification, it is argued that untenable working conditions resulted in new recruits adopting a coping strategy that led to the use rather than the suppression of emotions. The use of emotions provided workers with job satisfaction and greater control over service interactions. Management subsequently commandeered the use of emotions to complement the introduction of private sector management techniques and service delivery reforms, regaining control over worker-client interactions.