Reconstructing paleoelevation in eroded orogens

Hydrogen isotope and Ar-40/Ar-39 geochronological data are presented from muscovite within a crustal-scale extensional detachment of the Shuswap Metamorphic Complex, North American Cordillera. The hydrogen isotope compositions (deltaD(ms)) of precisely dated muscovite attain values as low as -156parts per thousand in the detachment mylonite, whereas footwall quartzite has a deltaD(ms) value of -81parts per thousand. The very low deltaD(ms) values in the detachment are best explained by infiltration of meteoric water, with maximum deltaD values of -135parts per thousand +/- 3parts per thousand, during extensional unroofing of the orogen at 49.0-47.9 Ma. On the basis of the empirically determined relationship between elevation and isotopic composition of precipitation, the reconstructed early Eocene paleoelevations of the orogen are 4060 +/- 250 m to 4320 +/- 250 m, at least 1000 m higher than the highest present-day peaks. We propose that the isotopic composition of surface-derived waters in extensional detachments represents a newly recognized method to estimate maximum paleoelevations attained immediately preceding extensional orogenic collapse.

Bitumens in the late Variscan hydrothermal vein-type uranium deposit of Pribram, Czech Republic: Sources, radiation-induced alteration, and relation to mineralization

The late Variscan (275-278 Ma) Pribram uranium deposit is one of the largest known accumulations of uraniferous bitumens in hydrothermal veins. The deposit extends along the northwestern boundary of the Central Bohemian pluton (345-335 Ma) with low-grade metamorphosed Late Proterozoic and unmetamorphosed Cambrian rocks. From a net uranium production of 41,742 metric tons (t), more than 6,000 t were extracted from bitumen-uraninite ores during 43 years of exploration and mining. Three morphological varieties of solid bitumen are recognized: globular, asphaltlike, and cokelike. While the globular bitumen is uranium free, the other two types are uraniferous. The amount of bitumen in ore veins gradually decreases toward the contact with the plutonic body and increases with depth. Two types of bitumen microtextures are recognized using high-resolution transmission electron microscopy: amorphous and microporous, the former being less common in uraniferous samples. A lower Raman peak area ratio (1,360/1,575 cm(-1)) in mineralized bitumens (0.9) compared with uranium-free samples (2.0) indicates a lower degree of microtextural organization in the latter The H/C and O/C atomic ratios in uranium-free bitumens (0.9-1.1 and 0.09, respectively) are higher than those in mineralized samples (H/C = 0.3-0.8, O/C = 0.03-0.09). The chloroform extractable matter yield is Very low in uranium-free bitumens (0.30-0.35% of the total organic carbon,TOC) and decreases with uranium content increase. The extracted solid uraniferous bitumen infrared spectra show depletion in aliphatic CH2 and CH3 groups compared to uranium-free samples. The concentration of oxygen-bearing functional groups relative to aromatic bonds in the IR spectra of uranium-free and mineralized bitumen, however, do not differ significantly. C-13 NMR confirmed than the aromaticity of a uraniferous sample is higher (F-ar = 0.61) than in the uranium-free bitumen (F-ar = 0.51). Pyrolysates from uraniferous and nonuraniferous bitumens do not differ significantly, being predominantly cresol, alkylphenols, alkylbenzenes, and alkylnaphthalenes. The liquid pyrolysate yield decreases significantly with increasing uranium content. The delta(13)C Values of bulk uranium-free bitumens and low-grade uraniferous, asphaltlike bitumens range from -43.6 to 52.3 per mil. High-grade, cokelike, uraniferous bitumens are more C-13 depleted (54.5 to -58.4 parts per thousand). In contrast to the very light isotopic ratios of the high-grade uraniferous cokelike bitumen bulk carbon, the individual n-alkanes and isoprenoids (pristane and phytane) extracted from the same sample are significantly C-13 enriched. The isotopic composition of the C13-24 n-alkanes extracted from the high-grade uraniferous sample (delta(13)C = -28.0 to 32.6 parts per thousand) are heavier compared with the same compounds in a uranium-free sample (delta(13)C = 31.9 to 33.8 parts per thousand). It is proposed that the bitumen source was the isotopically light (delta(13)C = 35.8 to 30.2 parts per thousand) organic matter of the Upper Proterozoic host rocks that were pyrolyzed during intrusion of the Central Bohemian pluton. The C-13- depleted pyrolysates were mobilized from the innermost part of the contact-metamorphic aureole, accumulated in structural traps in less thermally influenced parts of the sedimentary complex and were later extracted by hydrothermal fluids. Bitumens at the Pribram deposit are younger than the main part of the uranium mineralization and were formed through water-washing and radiation-induced polymerization of both the gaseous and liquid pyrolysates. Direct evidence for pyrolysate reduction of uranium in the hydrothermal system is difficult to obtain as the chemical composition of the original organic fluid phase was modified during water-washing and radiolytic alteration. However, indirect evidence-e.g., higher O/C atomic ratios in uranium-free bitumens (0.1) relative to the Upper Proterozoic source rocks (0.02-0.05), isotopically very light carbon in associated whewellite (delta(13)C = 31.7 to -28.4 parts per thousand), and the striking absence of bitumens in the pre-uranium, hematite stage of the mineralization-indicates that oxidation of organic fluids may have contributed to lowering of aO(2) and uraninite precipitation.

Preservation of an extreme transient geotherm in the Raft River detachment shear zone

Extensional detachment systems separate hot footwalls from cool hanging walls, but the degree to which this thermal gradient is the product of ductile or brittle deformation or a preserved original transient geotherm is unclear. Oxygen isotope thermometry using recrystallized quartz-muscovite pairs indicates a smooth thermal gradient (140 degrees C/100 m) across the gently dipping, quartzite-dominated detachment zone that bounds the Raft River core complex in northwest Utah (United States). Hydrogen isotope values of muscovite (delta D-Ms similar to-100 parts per thousand) and fluid inclusions in quartz (delta D-Fluid similar to-85 parts per thousand) indicate the presence of meteoric fluids during detachment dynamics. Recrystallized grain-shape fabrics and quartz c-axis fabric patterns reveal a large component of coaxial strain (pure shear), consistent with thinning of the detachment section. Therefore, the high thermal gradient preserved in the Raft River detachment reflects the transient geotherm that developed owing to shearing, thinning, and the potentially prominent role of convective flow of surface fluids.

Geochemical and geothermal study of springs in the Ossola-Simplon Region

Geological, hydrogeological and geochemical surveys were carried out in the Piedilago area (Ossola-Simplon region) in order to investigate the geothermal resources present in this area. Following these surface exploration efforts an exploratory geothermal well of 248 m was drilled in 1991. It discharges a thermal water with temperatures up to 43 degrees C and calcium (sodium) sulphate composition with a TDS close to 1350 mg/l. Chemical geothermometers suggest a reservoir temperature close to 45 degrees C indicating that the well virtually produces the pure uncooled thermal water. The Piedilago ex-ample is here considered as the departure point to establish both general criteria for further geothermal investigations in young mountains chains and taking into consideration all the available data on geology and fluid geochemistry of thermal systems in the Ossola-Simplon region, to constrain a geothermal model for the Lower Pennine Zone.

Geology and correlation of the Mersin mélanges, southern Turkey

Our paper aims to give a thorough description of the infra-ophiolitic melanges associated with the Mersin ophiolite. We propose new regional correlations of the Mersin melanges with other melange-like units or similar series, located both in southern Turkey and adjacent regions. The palaeotectonic implications of the correlations are also discussed. The main results may be summarized as follows: the infra-ophiolitic melange is subdivided into two units, the Upper Cretaceous Sorgun ophiolitic melange and the Ladinian-Carnian Hacialani melange. The Mersin melanges, together with the Antalya and Mamonia domains, are represented by a series of exotic units now found south of the main Taurus range, and are characteristic of the South-Taurides Exotic Units. These melanges clearly show the mixed origin of the different blocks and broken formations. Some components have a Palaeotethyan origin and are characterized by Pennsylvanian and Lower to Middle Permian pelagic and slope deposits. These Palaeotethyan remnants, found exclusively in the Hacialani melange, were reworked as major olistostromes in the Neotethys basin during the Eo-Cimmerian orogenic event. Neotethyan elements are represented by Middle Triassic seamounts and by broken formations containing typical Neotethyan conodont faunas such as Metapolygnathus mersinensis Kozur & Moix and M. primitius s. s., both present in the latest Carnian interval, as well as the occurrence of the middle Norian Epigondolella praeslovakensis Kozur, Masset & Moix. Other elements are clearly derived from the former north Anatolian passive margin and are represented by Huglu-type series including the Upper Triassic syn-rift volcanic event. These sequences attributed to the Huglu-Pindos back-arc ocean were displaced southward during the Late Cretaceous obduction event. The Tauric elements are represented by Eo-Cimmerian flysch-like and molasse sequences intercalated in Neotethyan series. Additionally, some shallow-water blocks might be derived from the Bolkardag para-autochthonous and the Taurus-Beydaglari marginal sequences.

Compositional Data in Biomedical Research

Modern methods of compositional data analysis are not well known in biomedical research.Moreover, there appear to be few mathematical and statistical researchersworking on compositional biomedical problems. Like the earth and environmental sciences,biomedicine has many problems in which the relevant scienti c information isencoded in the relative abundance of key species or categories. I introduce three problemsin cancer research in which analysis of compositions plays an important role. Theproblems involve 1) the classi cation of serum proteomic pro les for early detection oflung cancer, 2) inference of the relative amounts of di erent tissue types in a diagnostictumor biopsy, and 3) the subcellular localization of the BRCA1 protein, and it'srole in breast cancer patient prognosis. For each of these problems I outline a partialsolution. However, none of these problems is \solved". I attempt to identify areas inwhich additional statistical development is needed with the hope of encouraging morecompositional data analysts to become involved in biomedical research

Compositions in life science data

The aim of this talk is to convince the reader that there are a lot of interesting statisticalproblems in presentday life science data analysis which seem ultimately connected withcompositional statistics.Key words: SAGE, cDNA microarrays, (1D-)NMR, virus quasispecies

Stable isotope and trace element stratigraphy across the Permian-Triassic transition: A redefinition of the boundary in the Velebit Mountain, Croatia

Stable isotopes of carbonates (delta(13)C(carb), delta(18)O(carb)), organic matter (delta(13)C(org), delta(15)N(org)) and major, trace and rare earth element (REE) compositions of marine carbonate rocks of Late Permian to Early Triassic age were used to establish the position of the Permian-Triassic boundary (PTB) at two continuous sections in the Velebit Mountain, Croatia. The chosen sections - Rizvanusa and Brezimenjaca - are composed of two lithostratigraphic units, the Upper Permian Transitional Dolomite and the overlying Sandy Dolomite. The contact between these units, characterized by the erosional features and sudden occurrence of ooids and siliciclastic grains, was previously considered as the chronostratigraphic PTB. The Sandy Dolomite is characterized by high content of non-carbonate material (up to similar to 30 wt.% insoluble residue), originated from erosion of the uplifted hinterland. A relatively rich assemblage of Permian fossils (including Geinitzina, Globivalvulina, Hemigordius, bioclasts of gastropods, ostracods and brachiopods) was found for the first time in Sandy Dolomite, 5 m above the lithologic boundary in the Rizvanusa section. A rather abrupt negative delta(13)C(carb) excursion in both sections appears in rocks showing no recognizable facies change within the Sandy Dolomite, -2 parts per thousand at Rizvanusa and -1.2 parts per thousand at Brezimenjaca, 11 m and 0.2 m above the lithologic contact, respectively. This level within the lower part of the Sandy Dolomite is proposed as the chemostratigraphic PTB. In the Rizvanusa section, the delta(13)C(org) values decline gradually from similar to-25 parts per thousand in the Upper Permian to similar to-29 parts per thousand in the Lower Triassic. The first negative delta(13)C(org) excursion occurs above the lithologic contact, within the uppermost Permian deposits, and appears to be related to the input of terrigenous material. The release of isotopically light microbial soil-biomass into the shallow-marine water may explain this sudden decrease of delta(13)C(org) values below the PTB. This would support the hypothesis that in the western Tethyan realm the land extinction, triggering a sudden drop of woody vegetation and related land erosion, preceded the marine extinction. The relatively low delta(15)N(org) values at the Permian-Triassic (P-Tr) transition level, close to approximate to 0 parts per thousand, and a secondary negative delta(13)C(org) excursion of -0.5 parts per thousand point to significant terrestrial input and primary contribution of cyanobacteria. The profiles of the concentrations of redox-sensitive elements (Ce, Mn, Fe, V), biogenic or biogenic-scavenged elements (P, Ba, Zn, V), Ce/Ce* values, and normalized trace elements, including Ba/Al, Ba/Fe, Ti/Al, Al/(Al + Fe + Mn) and Mn/Ti show clear excursions at the Transitional Dolomite-Sandy Dolomite lithologic boundary and the chemostratigraphic P-Tr boundary. The stratigraphic variations indicate a major regression phase marking the lithologic boundary, transgressive phases in the latest Permian and a gradual change into shallow/stagnant anoxic marine environment towards the P-Tr boundary level and during the earliest Triassic. (C) 2010 Elsevier B.V. All rights reserved.

Temporal Geobiotic Mapping: a conceptual mapping technique toward visualising geobiotic areas in cross-section

Geobiota are defined by taxic assemblages (i.e., biota) and their defining abiotic breaks, which are mapped in cross-section to reveal past and future biotic boundaries. We term this conceptual approach Temporal Geobiotic Mapping (TGM) and offer it as a conceptual approach for biogeography. TGM is based on geological cross-sectioning, which creates maps based on the distribution of biota and known abiotic factors that drive their distribution, such as climate, topography, soil chemistry and underlying geology. However, the availability of abiotic data is limited for many areas. Unlike other approaches, TGM can be used when there is minimal data available. In order to demonstrate TGM, we use the well-known area in the Blue Mountains, New South Wales (NSW), south-eastern Australia and show how surface processes such as weathering and erosion affect the future distribution of a Moist Basalt Forest taxic assemblage. Biotic areas are best represented visually as maps, which can show transgressions and regressions of biota and abiota over time. Using such maps, a biogeographer can directly compare animal and plant distributions with features in the abiotic environment and may identify significant geographical barriers or pathways that explain biotic distributions.

Carbon and oxygen isotope study of hydrothermal carbonates in the zinc-lead deposits of the San Vicente district, central Peru: A quantitative modeling on mixing processes and CO2 degassing

Carbon and oxygen isotope studies of the host and gangue carbonates of Mississippi Valley-type zinc-lead deposits in the San Vicente District hosted in the Upper Triassic to Lower Jurassic dolostones of the Pucara basin (central Peru) were used to constrain models of the ore formation. A mixing model between an incoming hot saline slightly acidic radiogenic (Pb, Sr) fluid and the native formation water explains the overall isotopic variation (delta(13)C = - 11.5 to + 2.5 parts per thousand relative to PDB and delta(18)O = + 18.0 to + 24.3 parts per thousand relative to SMOW) of the carbonate generations. The dolomites formed during the main ore stage show a narrower range (delta(13)C = - 0.1 to + 1.7 parts per thousand and delta(18)O = + 18.7 to + 23.4 parts per thousand) which is explained by exchange between the mineralizing fluids and the host carbonates combined with changes in temperature and pressure. This model of fluid-rock interaction explains the pervasive alteration of the host dolomite I and precipitation of sphalerite I. The open-space filling hydrothermal white sparry dolomite and the coexisting sphalerite II formed by prolonged fluid-host dolomite interaction and limited CO2 degassing. Late void-filling dolomite III (or calcite) and the associated sphalerite III formed as the consequence of CO2 degassing and concomitant pH increase of a slightly acidic ore fluid. Widespread brecciation is associated to CO2 outgassing. Consequently, pressure variability plays a major role in the ore precipitation during the late hydrothermal events in San Vicente. The presence of native sulfur associated with extremely carbon-light calcites replacing evaporitic sulfates (e.g., delta(13)C = - 11.5 parts per thousand), altered native organic matter and heavier hydrothermal bitumen (from - 27.0 to - 23.0 parts per thousand delta(13)C) points to thermochemical reduction of sulfate and/or thiosulfate. The delta(13)C- and delta(18)O-values of the altered host dolostone and hydrothermal carbonates, and the carbon isotope composition of the associated organic matter show a strong regional homogeneity. These results coupled with the strong mineralogical and petrographic similarities of the different MVT occurrences perhaps reflects the fact that the mineralizing processes were similar in the whole San Vicente belt, suggesting the existence of a common regional mineralizing hydrothermal system with interconnected plumbing.

Mid Holocene in Sant Julià de Boada (Baix Empordà, Girona): Stratigraphical sequence and paleoenvironmental records of the paludal deposits

Descripció de la seqüència estratigràfica i dels registres paleoambientals dels sediments holocens de Sant Julià de Boada

Contribution to the geology of Southern Turkey: new insights from the Mersin mélanges and from the Lycian and Antalya nappes

Abstract The study of fossil Tethyan continental margins implies the consideration of the oceanic domains to which they were connected. The advent of plate tectonics confirmed the importance of the detection of accretion-related mélanges. Ophiolitic mélanges are derived from both an upper ophiolitic obducting plate and a lower oceanic plate. Besides ophiolitic elements, the mélanges may incorporate parts of a magmatic arc and dismembered fragments of a passive continental margin. As the lower plate usually totally disappears during the obduction process, it can only be reconstructed from its elements found in the mélanges. Because of their key location at active margin boundaries, preserved accretion-related mélanges provide strong constraints on the geological evolution of former oceanic domains and their adjacent margins. The identification of Palaeotethyan remnants as accretionary series or reworked during the Late Triassic Eo-Cimmerian event, as well as the recognition of HugluPindos marginal sequences in southern Turkey and in the external Hellenides represent the main achievements of this work, making possible to establish new palaeogeographical correlations. The Mersin mélanges (Turkey), together with the Antalya and Mamonia (Cyprus) domains, are characterized by a series of exotic units found now south of the main Taurus range and compose the South-Taurides Exotic Units. The Mersin mélanges are subdivided in a Triassic and a Late Cretaceous unit. These units consist of the remnants of three major Tethyan oceans, the Palaeotethys, the Neotethys and the Huglu-Pindos. The definition and inventory of the Upper Antalya Nappes (Turkey) are still a matter of controversies and often conflicting interpretations. The recognition of Campanian radiolarians on top of the Kerner Gorge unit directly overlain by the Ordovician Seydi§ehir Fm. of the Tahtah Dag Nappe outlines a tectonic contact and demonstrates that the Upper Antalya Nappes system is composed of three different nappes, the Kerner Gorge, Bakirli and the Tahtah Dag nappes. Additionally, a limestone block in a doubtful tectonic position at the base of the Upper Antalya Nappes yielded for the first time two middle Viséan associations of foraminifers and problematic algae. The Tavas Nappe in the Lycian Nappes (Turkey) is classically divided into the Karadag, Teke Dere, Köycegiz and Haticeana units. As for the Mersin mélanges, the Tavas Nappe is highly composite and includes dismembered units belonging to the Palaeotethyan, Neotethyan and HugluPindos realms. The Karadag unit consists of a Gondwana-type platform succession ranging from the Late Devonian to the Late Triassic. It belongs to the Cimmerian Taurus terrane and was part of the northern passive margin of the Neotethys. The Teke Dere unit is composed of different parts of the Palaeotethyan succession including Late Carboniferous OIB-type basalts, Carboniferous MORB-type basalts, an Early Carboniferous siliciclastic series and a Middle Permian arc sequence. The microfauna and microflora identified in different horizons within the Teke Dere unit share strong biogeographical affinities with the northern Palaeotethyan borders. Kubergandian limestones in primary contact above the Early Carboniferous siliciclastics yielded a rich and diverse microfauna and microflora also identified in reworked cobbles within the Late Triassic Gevne Fm. of the Aladag unit (Turkey). The sedimentological evolution of the Köycegiz and Haticeana series is in many points similar to classical Pindos sequences. These series originated in the Huglu-Pindos Ocean along the northern passive margin of the Anatolian (Turkish transect) and Sitia-Pindos (Greek transect) terranes. Conglomerates at the base of the Lentas Unit in southern Crete (Greece) yielded a microfauna and microflora presenting also strong affinities with the northern borders of the Palaeotethys. This type of reworked sediments at the base of Pindos-like series would suggest a derivation from the Palaeotethyan active margin. -Résumé (French abstract) L'étude des marges continentales fossiles de l'espace téthysien implique d'étudier les domaines océaniques qui y étaient rattachés. Les progrès de la tectonique des plaques ont confirmé l'importance de la reconnaissance des mélanges d'accrétion. Les mélanges ophiolitiques dérivent d'une plaque supérieure ophiolitique qui obducte, et d'une plaque inférieure océanique. En plus d'éléments ophiolitiques, les mélanges peuvent aussi incorporer des parties d'un arc magmatique, ou des fragments d'une marge continentale passive. Comme la plaque inférieure disparaît généralement complètement durant le processus d'obduction, elle ne peut être reconstruite qu'au travers de ses éléments trouvés dans les mélanges. A cause de leur situation aux limites de marges actives, les mélanges d'accrétion bien préservés permettent de contraindre l'évolution géologique d'anciens océans et de leurs marges. L'identification de vestiges de la Paléotéthys en série d'accrétion ou remaniés lors de l'orogenèse éo-cimmérienne au Trias supérieur, ainsi que l'observation de séquences marginales de Huglu-Pinde en Turquie du sud et dans les Hellénides externes représentent les principaux résultats de ce travail, permettant d'établir de nouvelles corrélations paléogéographiques. Les mélanges de Mersin (Turquie), avec les domaines d'Antalya et de Mamonia (Chypre), sont caractérisés par des unités exotiques se trouvant au sud de la chaîne taurique, et forment les Unités Exotiques Sud-Tauriques. Les mélanges de Mersin sont subdivisés en une unité triasique, et une autre du Crétacé supérieur. Ces unités comprennent les reliques de trois principaux océans téthysiens, la Paléotéthys, la Néotéthys et Huglu-Pinde. L'inventaire et la définition des nappes supérieures d'Antalya (Turquie) sont encore matière à controverse et donne lieu à des interprétations conflictuelles. La découverte de radiolaires campaniens au sommet de l'unité de la Gorge de Kemer, directement recouverts par la formation ordovicienne de Seydisehir de la nappe du Tahtali Dag met en évidence un contact tectonique et démontre que les nappes supérieures sont composées de trois différentes nappes, celle de la Gorge de Kemer, celle du Bakirli et celle Tahtali Dag. De plus, un bloc de calcaire dont la position tectonique demeure incertaine à la base des nappes supérieures a fourni pour la première fois deux associations viséennes de foraminifères et d'algues problématiques. La nappe de Tavas dans les nappes lyciennes (Turquie) est séparée en unités du Karadag, du Teke Dere, de Köycegiz et d'Haticeana. Comme pour les mélanges de Mersin, la nappe de Tavas est composite et inclut des unités appartenant à la Paléotéthys, à la Néotéthys et à Huglu-Pinde. L'unité du Karadag est une plateforme carbonatée de type Gondwana se développant du Dévonien supérieur au Trias supérieur. Elle appartient au domaine cimmérien du Taurus et formait la marge nord de la Néotéthys. L'unité du Teke Dere est composée de différentes écailles paléotéthysiennes et inclut des basaltes d'île océanique du Carbonifère supérieur, des basaltes de ride océanique du Carbonifère, une série siliciclastique du Carbonifère supérieur et un arc du Permien moyen. Les microfaunes et -flores trouvées à différents niveaux de la série du Teke Dere partagent de fortes affinités paléogéographiques avec les marges nord de la Paléotéthys. Des calcaires du Kubergandien en contact primaire au-dessus de la série siliciclastique a donné de riches microfaunes et -flores, également identifiées dans des galets remaniés dans la formation de Gevne du Trias supérieur de l'Aladag. L'évolution sédimentologique des séries de Köycegiz et d'Haticeana sont très similaires aux séries classiques du Pinde. Ces séquences prennent leur racine dans l'océan de Huglu-Pinde, le long de la marge passive nord anatolienne (profil turc) et de la marge de Sitia-Pinde (profil grec). Des conglomérats à la base de l'unité de Lentas au sud de la Crète (Grèce) ont donné des microfaunes et flores partageant également de fortes similitudes avec les bordures nord de la Paléotéthys. Le type de sédiments remaniés à la base d'unités de type Pinde suggère une dérivation depuis la marge active de la Paléotéthys. -Résumé grand public (non-specialized abstract) Au début du 20ème siècle, Alfred Wegener bouleverse les croyances géologiques de l'époque et publie plusieurs articles sur la dérive ou la translation des continents. En utilisant des arguments géographiques (similarités des lignes de côte), paléontologiques (faunes et flores similaires) et climatiques (dépôts tropicaux et glaciaires), Wegener explique qu'il y a plusieurs millions d'années, les terres émergées actuelles ne devaient former qu'un seul et grand continent. La fin du 20ème siècle verra l'avènement de la théorie de la tectonique des plaques suite à la reconnaissance du cycle de Wilson, des rides médio-océaniques, des anomalies magnétiques dans les océans et des sutures océaniques qui représentent les reliques d'océans disparus. Le Cycle de Wilson se caractérise par une suite d'évènements géologiques majeurs pouvant se résumer de la manière suivante : (1) séparation d'un craton continental en deux parties, créant une limite de plaque divergente. C'est ce que l'on appelle un rift; (2) développement et croissance d'un océan entre ces deux blocs. Des roches magmatiques remontent à la surface de la terre et forment une chaîne de montagne sous-marine que l'on appelle ride médio-océanique ou dorsale. L'océan continue de se développer, et des sédiments se déposent à sa surface formant la suite ophiolitique ou trinité de Steinmann; (3) après une phase d'expansion plus ou moins longue, les conditions imposées aux limites des plaques à la surface de la terre changent, et l'océan se met à se refermer par disparition progressive (subduction) de sa croûte océanique sous une croûte continentale par exemple. Ceci crée une nouvelle limite de plaque, convergente cette fois; (4) la subduction de la plaque océanique sous la plaque continentale provoque une remontée de magma formant des chaînes volcaniques à la surface de la Terre ; (5) une fois que la plaque océanique a complètement disparu, les deux blocs préalablement séparés par l'océan font collision, formant ainsi une chaîne de montagne. Les chaînes de montagnes sont de manière générale formées par un empilement plus ou moins complexe de nappes. C'est au coeur de certaines de ces nappes que se trouvent les vestiges de l'océan disparu. Un des objectifs de ce travail était la recherche de ces vestiges dans le domaine téthysien de la Méditerranée orientale. Pour ce faire, nous avons parcourus une grande partie du sud de la Turquie, nous sommes allés à Chypre, dans le Sultanat d'Oman, en Iran, en Crète, et nous avons visités quelques îles grecques du Dodécanèse. La région de la Méditerranée orientale est une zone qui a été tectoniquement très active, et qui continue de l'être de nos jours par des phénomènes de subduction (ex. les volcans de Santorin), et par des mouvements coulissants entre des plaques continentales (ex. la faille nord-anatolienne) qui donnent régulièrement lieu à des tremblements de terre. Pour le géologue, la complexité de ces zones d'étude réside dans le fait que les chaînes de montagne actuelles ne contiennent en général pas seulement les restes d'un océan, mais bien de plusieurs bassins océaniques qui se sont succédés dans l'espace et dans le temps. Les nappes qui se trouvent au sud de la Turquie et dans le Dodécanèse forment un important jalon dans la chaîne alpine qui s'étend depuis les Alpes jusque dans l'Himalaya. L'idée d'un continuum au coeur de ce système se basait principalement sur l'âge des océans et sur la reconnaissance de similarités dans l'évolution des séries sédimentaires. La localisation des vestiges de la Paléotéthys ainsi que l'identification des séries sédimentaires ayant appartenu à l'océan de HugluPinde repris sous forme de nappes en Turquie et en Grèce sont cruciales pour permettre de bonnes corrélations locales et régionales. La reconnaissance, la compréhension et l'interprétation de ces séries sédimentaires permettront d'élaborer un modèle d'évolution géodynamique régional, s'appuyant sur des faits de terrains indiscutables, et prenant en compte les contraintes globales que ce genre d'exercice implique.

Quantitative analysis of crystal/grain sizes and their distributions in 2D and 3D

We review methods to estimate the average crystal (grain) size and the crystal (grain) size distribution in solid rocks. Average grain sizes often provide the base for stress estimates or rheological calculations requiring the quantification of grain sizes in a rock's microstructure. The primary data for grain size data are either 1D (i.e. line intercept methods), 2D (area analysis) or 3D (e.g., computed tomography, serial sectioning). These data have been used for different data treatments over the years, whereas several studies assume a certain probability function (e.g., logarithm, square root) to calculate statistical parameters as the mean, median, mode or the skewness of a crystal size distribution. The finally calculated average grain sizes have to be compatible between the different grain size estimation approaches in order to be properly applied, for example, in paleo-piezometers or grain size sensitive flow laws. Such compatibility is tested for different data treatments using one- and two-dimensional measurements. We propose an empirical conversion matrix for different datasets. These conversion factors provide the option to make different datasets compatible with each other, although the primary calculations were obtained in different ways. In order to present an average grain size, we propose to use the area-weighted and volume-weighted mean in the case of unimodal grain size distributions, respectively, for 2D and 3D measurements. The shape of the crystal size distribution is important for studies of nucleation and growth of minerals. The shape of the crystal size distribution of garnet populations is compared between different 2D and 3D measurements, which are serial sectioning and computed tomography. The comparison of different direct measured 3D data; stereological data and direct presented 20 data show the problems of the quality of the smallest grain sizes and the overestimation of small grain sizes in stereological tools, depending on the type of CSD. (C) 2011 Published by Elsevier Ltd.

Application of K-feldspar-jadeite-quartz barometry to eclogite facies metagranites and metapelites in the Sesia Lanzo Zone (Western Alps, Italy)

The eclogite facies assemblage K-feldspar-jadeite-quartz in metagranites and metapelites from the Sesia-Lanzo Zone (Western Alps, Italy) records the equilibration pressure by dilution of the reaction jadeite + quartz = albite. The metapelites show partial transformation from a pre-Alpine assemblage of garnet (Alm(63)Prp(26)Grs(10))-K-feldspar-plagioclase-biotite +/- sillimanite to the Eo-Alpine high-pressure assemblage garnet (Alm(50)Prp(14)Grs(35))-jadeite (Jd(80-97)Di(0-4)Hd(0-8)Acm(0-7))=zoisite-phengite. Plagioclase is replaced by jadeite-zoisite-kyanite-K-feldspar-quartz and biotite is replaced by garnet-phengite or omphacite-kyanite-phengite. Equilibrium was attained only in local domains in the metapelites and therefore the K-feldspar-jadeite-quartz (KJQ) barometer was applied only to the plagioclase pseudomorphs and K-feldspar domains. The albite content of K-feldspar ranges from 4 to 11 mol% in less equilibrated assemblages from Val Savenca and from 4 to 7 mol% in the partially equilibrated samples from Monte Mucrone and the equilibrated samples from Montestrutto and Tavagnasco. Thermodynamic calculations on the stability of the assemblage K-feldspar-jadeite-quartz using available mixing data for K-feldspar and pyroxene indicate pressures of 15-21 kbar (+/- 1.6-1.9 kbar) at 550 +/- 50 degrees C. This barometer yields direct pressure estimates in high-pressure rocks where pressures are seldom otherwise fixed, although it is sensitive to analytical precision and the choice of thermodynamic mixing model for K-feldspar. Moreover, the KJQ barometer is independent of the ratio P-H2O/P-T. The inferred limiting a(H2O) for the assemblage jadeite-kyanite in the metapelites from Val Savenca is low and varies from 0.2 to 0.6.

Late Jurassic continental flood basalt doleritic dykes in northwestern Cuba: remnants of the Gulf of Mexico opening

Accreted terranes, comprising a wide variety of Late Jurassic and Early Cretaceous igneous and sedimentary rocks are an important feature of Cuban geology. Their characterization is helpful for understanding Caribbean paleogeography. The Guaniguanico terrane (western Cuba) is formed by upper Jurassic platform sediments intruded by microgranular dolerite dykes. The geochemical characteristics of the dolerite whole rock samples and their minerals (augitic clinopyroxene, labradorite and andesine) are consistent with a tholeiitic affinity. Major and trace element concentrations as well as Nd, Sr and Pb isotopes show that these rocks also have a continental affinity. Sample chemistry indicates that these lavas are similar to a low Ti-P2O5 (LTi) variety of continental flood basalts (CFB) similar to the dolerites of Ferrar (Tasmania). They derived from mixing of a lithospheric mantle Source and an asthenopheric component similar to E-MORB with minor markers of crustal contamination and sediment assimilation. However, the small quantity of Cuban magmatic rocks, similarly to Tasmania, Antarctica and Siberia differs from other volumetrically important CFB occurrences Such as Parana and Deccan. These dolerites are dated as 165-150 Ma and were emplaced during the separation of the Yucatan block from South America. They could in fact be part of the Yucatan-South America margin through which the intrusive system was emplaced and which was later accreted to the Cretaceous arc of central Cuba and to the Palaeogene arc of eastern Cuba. These samples could therefore reflect the pre-rift stage between North and South America and the opening of the gulf of Mexico.