An examination of the within -product category versus across -product category effects of partially comparative pricing

Partially comparative pricing involves a featured store providing price comparisons in reference to a competitor for some products (comparatively priced products) while omitting such comparisons and providing only its price for other products (non-comparatively priced products). Barone, Manning and Miniard (2004) found that while partially comparative pricing enhanced consumers' price perceptions of comparatively priced products at the featured retailer, it had the opposite effect for non-comparatively priced products (i.e., an inferiority effect). To the contrary, it is argued that a price comparison for one brand in a product category may enhance consumers' price perceptions of the remaining, non-comparatively priced brands within the same product category (i.e., a superiority effect). This research seeks to (a) examine the robustness of partially comparative pricing's effect in an across-product category context compared to a within-product category context and (b) extend the understanding of partially comparative pricing's within-product category effect on non-comparatively priced brands by examining potential moderators of this effect: brand diversity, brand typicality, and the relative expensiveness of the brand receiving the price comparison. The findings of four studies provide evidence to support the presence of a superiority effect in a within-product category context and suggests that the adverse effect of partially comparative pricing in an across-product category context may not be as robust as previously thought. Although the superiority effect was unaffected by brand diversity (i.e., whether the brands emanated from different manufacturers or from a single manufacturer), it was found to be moderated by the typicality of the brand receiving the price comparison as well as the comparison brand's relative expensiveness. Research participants formed more favorable relative price beliefs about the non-comparatively priced brand when the comparatively priced brand was perceived as a more typical member of the product category. Similarly, participants formed more favorable beliefs about the non-comparatively priced brand when the comparison price was assigned to the most expensive brand in the product category rather than the least expensive brand.

Development of Surface Flaw Thresholds for Pre-Cured Fiber Reinforced Polymer and Groove Size Tolerance for Near Surface Mounted Fiber Reinforced Polymer Retrofit Systems

Since the introduction of fiber reinforced polymers (FRP) for the repair and retrofit of concrete structures in the 1980’s, considerable research has been devoted to the feasibility of their application and predictive modeling of their performance. However, the effects of flaws present in the constitutive components and the practices in substrate preparation and treatment have not yet been thoroughly studied. This research aims at investigating the effect of surface preparation and treatment for the pre-cured FRP systems and the groove size tolerance for near surface mounted (NSM) FRP systems; and to set thresholds for guaranteed system performance. The research included both analytical and experimental components. The experimental program for the pre-cured FRP systems consisted of a total of twenty-four (24) reinforced concrete (RC) T-beams with various surface preparation parameters and surface flaws, including roughness, flatness, voids and cracks (cuts). For the NSM FRP systems, a total of twelve (12) additional RC T-beams were tested with different grooves sizes for FRP bars and strips. The analytical program included developing an elaborate nonlinear finite element model using the general purpose software ANSYS. The model was subsequently used to extend the experimental range of parameters for surface flatness in pre-cured FRP systems, and for groove size study in the NSM FRP systems. Test results, confirmed by further analyses, indicated that contrary to the general belief in the industry, the impact of surface roughness on the global performance of pre-cured FRP systems was negligible. The study also verified that threshold limits set for wet lay-up FRP systems can be extended to pre-cured systems. The study showed that larger surface voids and cracks (cuts) can adversely impact both the strength and ductility of pre-cured FRP systems. On the other hand, frequency (or spacing) of surface cracks (cuts) may only affect system ductility rather than its strength. Finally, within the range studied, groove size tolerance of +1/8 in. does not appear to have an adverse effect on the performance of NSM FRP systems.

Foreign direct investment via M&A and domestic entrepreneurship:blessing or curse?

There are conflicting predictions in the literature about the relationship between FDI and entrepreneurship. This paper explores how foreign direct investment (FDI) inflows, measured by lagged cross-border mergers and acquisitions (M&A), affect entrepreneurial entry in the host economy. We have constructed a micro-panel of more than two thousand individuals in each of seventy countries, 2000–2009, linked to FDI by matching sectors. We find the relationship between FDI inflows and domestic entrepreneurship to be negative across all economies. This negative effect is much more pronounced in developed than developing economies and is also identified within industries, notably in manufacturing. Policies to encourage FDI via M&A need to consider how to counteract the prevailing adverse effect on domestic entrepreneurship.

Challenges and Opportunities in Edge Computing

Many cloud-based applications employ a data centre as a central server to process data that is generated by edge devices, such as smartphones, tablets and wearables. This model places ever increasing demands on communication and computational infrastructure with inevitable adverse effect on Quality-of-Service and Experience. The concept of Edge Computing is predicated on moving some of this computational load towards the edge of the network to harness computational capabilities that are currently untapped in edge nodes, such as base stations, routers and switches. This position paper considers the challenges and opportunities that arise out of this new direction in the computing landscape.

On precise three-dimensional environment modeling via UAV-based photogrammetric systems

Abstract : Images acquired from unmanned aerial vehicles (UAVs) can provide data with unprecedented spatial and temporal resolution for three-dimensional (3D) modeling. Solutions developed for this purpose are mainly operating based on photogrammetry concepts, namely UAV-Photogrammetry Systems (UAV-PS). Such systems are used in applications where both geospatial and visual information of the environment is required. These applications include, but are not limited to, natural resource management such as precision agriculture, military and police-related services such as traffic-law enforcement, precision engineering such as infrastructure inspection, and health services such as epidemic emergency management. UAV-photogrammetry systems can be differentiated based on their spatial characteristics in terms of accuracy and resolution. That is some applications, such as precision engineering, require high-resolution and high-accuracy information of the environment (e.g. 3D modeling with less than one centimeter accuracy and resolution). In other applications, lower levels of accuracy might be sufficient, (e.g. wildlife management needing few decimeters of resolution). However, even in those applications, the specific characteristics of UAV-PSs should be well considered in the steps of both system development and application in order to yield satisfying results. In this regard, this thesis presents a comprehensive review of the applications of unmanned aerial imagery, where the objective was to determine the challenges that remote-sensing applications of UAV systems currently face. This review also allowed recognizing the specific characteristics and requirements of UAV-PSs, which are mostly ignored or not thoroughly assessed in recent studies. Accordingly, the focus of the first part of this thesis is on exploring the methodological and experimental aspects of implementing a UAV-PS. The developed system was extensively evaluated for precise modeling of an open-pit gravel mine and performing volumetric-change measurements. This application was selected for two main reasons. Firstly, this case study provided a challenging environment for 3D modeling, in terms of scale changes, terrain relief variations as well as structure and texture diversities. Secondly, open-pit-mine monitoring demands high levels of accuracy, which justifies our efforts to improve the developed UAV-PS to its maximum capacities. The hardware of the system consisted of an electric-powered helicopter, a high-resolution digital camera, and an inertial navigation system. The software of the system included the in-house programs specifically designed for camera calibration, platform calibration, system integration, onboard data acquisition, flight planning and ground control point (GCP) detection. The detailed features of the system are discussed in the thesis, and solutions are proposed in order to enhance the system and its photogrammetric outputs. The accuracy of the results was evaluated under various mapping conditions, including direct georeferencing and indirect georeferencing with different numbers, distributions and types of ground control points. Additionally, the effects of imaging configuration and network stability on modeling accuracy were assessed. The second part of this thesis concentrates on improving the techniques of sparse and dense reconstruction. The proposed solutions are alternatives to traditional aerial photogrammetry techniques, properly adapted to specific characteristics of unmanned, low-altitude imagery. Firstly, a method was developed for robust sparse matching and epipolar-geometry estimation. The main achievement of this method was its capacity to handle a very high percentage of outliers (errors among corresponding points) with remarkable computational efficiency (compared to the state-of-the-art techniques). Secondly, a block bundle adjustment (BBA) strategy was proposed based on the integration of intrinsic camera calibration parameters as pseudo-observations to Gauss-Helmert model. The principal advantage of this strategy was controlling the adverse effect of unstable imaging networks and noisy image observations on the accuracy of self-calibration. The sparse implementation of this strategy was also performed, which allowed its application to data sets containing a lot of tie points. Finally, the concepts of intrinsic curves were revisited for dense stereo matching. The proposed technique could achieve a high level of accuracy and efficiency by searching only through a small fraction of the whole disparity search space as well as internally handling occlusions and matching ambiguities. These photogrammetric solutions were extensively tested using synthetic data, close-range images and the images acquired from the gravel-pit mine. Achieving absolute 3D mapping accuracy of 11±7 mm illustrated the success of this system for high-precision modeling of the environment.

A relação do branqueamento não vital e a reabsorção cervical externa

A procura pelo padrão estético na Medicina Dentária tem crescido a cada ano, em função da necessidade da população em estar de acordo com os padrões estéticos da sociedade, que ditam dentes brancos, bem contornados e alinhados. O branqueamento para dentes não vitais é um procedimento utilizado há muito tempo e possui vantagens indiscutíveis, como o baixo custo, técnica conservadora e segurança. Porém, há muito tempo que se discute a relação do branqueamento interno com o aparecimento da reabsorção cervical externa. Muitos estudos foram realizados apresentando não só resultados diferentes, mas também pontos de vista diferentes envolvendo assuntos tais como o agente branqueador a ser escolhido e suas concentrações, qual deles possui melhor desempenho e qual o mais seguro. Por isso, essa revisão de literatura teve como objetivo realizar um levantamento de tais estudos através de pesquisa na qual foram identificados artigos sobre o tema, publicados em português e inglês e indexados no banco de dados B-on, PubMed, SciELO, MEDLINE e LILACS e discutir à luz dos conhecimentos científicos a relação de tal procedimento com o aparecimento da reabsorção cervical externa e quais medidas que podem ser tomadas pelo profissional para minimizar este risco. Diante do exposto, foi verificado que a Reabsorção Cervical Externa é um dos principais efeitos adversos do branqueamento interno, porém, há medidas que devem ser adoptadas pelo profissional para impedir ou minimizar este risco, como a utilização do tampão cervical, a não utilização do condicionamento ácido prévio ao branqueamento e não utilização de fontes de calor. Além disso, se torna muito importante que haja um acompanhamento do caso após o tratamento concluído, pois uma vez que haja o aparecimento da RCE, esta deve ser tratada o mais rápido possível.

γ-Irradiation effects on appearance and aroma of 'Kensington Pride' mango fruit

γ-Irradiation doses of 0.5 (target) and 1.0 (high) kGy were applied as insect disinfestation treatments to 'Kensington Pride' mango fruit. The effects of these treatments on fruit physicochemical properties and aroma volatile production were investigated and compared to non-irradiated controls. There were no significant effects of the irradiation treatments on flesh total soluble solids content. However, the loss of green skin colour usually associated with fruit ripening was inhibited by irradiation at both 0.5 and 1.0 kGy by approximately 32 and 52%, respectively, relative to non-irradiated fruit. Fruit exposed to 0.5 and 1.0 kGy exhibited a 58 and 80% reduction in emission of a-terpinolene volatiles, respectively. Thus, γ-irradiation at 0.5 and 1.0 kGy can have an adverse effect on 'Kensington Pride' mango fruit aroma volatile production and skin colouration.

Non-invasive monitoring of changes in exhaled markers of airway inflammation in Thoroughbred racehorses

Exhaled breath (EB) and exhaled breath condensate (EBC) contain numerous volatile gases and a wide-array of non-volatile compounds, several of which have been investigated as markers of lower airway inflammation in human and veterinary medicine and have been used to diagnose and monitor diseases associated with pulmonary inflammation. The identification of reliable biomarkers within EB and EBC is an active research focus with the common goal of establishing non-invasive and repeatable assessment of respiratory health and disease in mammals. The application of EB and EBC analysis holds considerable appeal in the investigation of respiratory disease in Thoroughbred racehorses, as inflammatory airway disease (IAD) is a common cause for poor performance in this population of animals. This study documented that EB and EBC samples can be safely collected from Thoroughbred racehorses in their own environment, without adverse effect or interference with the horse’s training regimen. The use of off-line collection and analysis of exhaled gases via chemiluminescence is suitable for the measurement of exhaled carbon monoxide, but is not appropriate for analyzing exhaled nitric oxide in horses. Significant changes in the concentration of exhaled CO and the pH of EBC occurred in response to strenuous exercise and when exercising in different environmental temperatures. Exhaled CO was associated with tracheal mucus score (and the number of neutrophils in the mucus) and EBC pH was significantly different in horses with evidence of neutrophilic IAD compared to horses without IAD. Numerous physiological and environmental variables were identified as confounding factors in the assessment of both exhaled CO and EBC pH, with respiratory rate prior to EB collection, and during EBC collection, consistently identified as an explanatory variable influencing the concentration of exhaled biomarkers. Further studies in EB and EBC analysis in horses need to focus on objectively accounting for key respiratory dynamics during sample collection.

From the field to the table: ionizing radiation as a feasible postharvest treatment for fresh and dried plant foods

Food irradiation is a treatment that involves subjecting in-bulk or packaged food to a controlled dose of ionizing radiation, with a clearly defined goal. It has been used for disinfestation and sanitization of food commodities and to retard postharvest ripening and senescence processes, being a sustainable alternative to chemical agents 1 . Doses up to 10 kGy are approved by several international authorities for not offering negative effects to food from a nutrition and toxicology point of view 2 . However, the adoption of this technology for food applications has been a slow process due to some misunderstandings by the consumer who often chooses non-irradiated foods. In this study, the effects of the ionizing radiation treatment on physical, chemical and bioactive properties of dried herbs and its suitability for preserving quality attributes of fresh vegetables during cold storage were evaluated. The studied herbs, perennial spotted rockrose (Tuberaria lignosa (Sweet) Samp.) and common mallow (Malva neglecta Wallr.) were freeze-dried and then irradiated up to 10 kGy in a Cobalt-60 chamber. The selected vegetables, watercress (Nasturtium officinale R. Br.) and buckler sorrel (Rumex induratus Boiss. Reut.) were rinsed in tap water, packaged in polyethylene bags, submitted to irradiation doses up to 6 kGy and then were stored at 4 C for a period of up to 12 days. Physical, chemical and bioactive parameters of irradiated and non-irradiated samples were evaluated using different methodologies the colour was measured with a colorimeter, individual chemical compounds were analyzed by chromatographic techniques, antioxidant properties were evaluated using in vitro assays based on different reaction mechanisms, and other quality analyses were performed following official methods of analysis. The irradiation treatment did not significantly affect the colour of the perennial spotted rockrose samples, or its phenolic composition and antioxidant activity 3 . Medium doses preserved the colour of common mallow and a low dose did not induce any adverse effect in the organic acids profile. The green colour of the irradiated vegetables was maintained during cold storage but the treatment had pros and cons in other quality attributes. The 2 kGy dose preserved free sugars and favoured polyunsaturated fatty acids (PUFA) while the 5 kGy dose favoured tocopherols and preserved the antioxidant properties in watercress samples. The 6 kGy dose was a suitable option for preserving PUFA and the ω-6 ω-3 fatty acids ratio in buckler sorrel samples. This comprehensive experimental work allowed selecting appropriate processing doses for the studied plant foods in order to preserve its quality attributes and edibility.

Essays on Market Frictions and Securitization

This dissertation provides a novel theory of securitization based on intermediaries minimizing the moral hazard that insiders can misuse assets held on-balance sheet. The model predicts how intermediaries finance different assets. Under deposit funding, the moral hazard is greatest for low-risk assets that yield sizable returns in bad states of nature; under securitization, it is greatest for high-risk assets that require high guarantees and large reserves. Intermediaries thus securitize low-risk assets. In an extension, I identify a novel channel through which government bailouts exacerbate the moral hazard and reduce total investment irrespective of the funding mode. This adverse effect is stronger under deposit funding, implying that intermediaries finance more risky assets off-balance sheet. The dissertation discusses the implications of different forms of guarantees. With explicit guarantees, banks securitize assets with either low information-intensity or low risk. By contrast, with implicit guarantees, banks only securitize assets with high information-intensity and low risk. Two extensions to the benchmark static and dynamic models are discussed. First, an extension to the static model studies the optimality of tranching versus securitization with guarantees. Tranching eliminates agency costs but worsens adverse selection, while securitization with guarantees does the opposite. When the quality of underlying assets in a certain security market is sufficiently heterogeneous, and when the highest quality assets are perceived to be sufficiently safe, securitization with guarantees dominates tranching. Second, in an extension to the dynamic setting, the moral hazard of misusing assets held on-balance sheet naturally gives rise to the moral hazard of weak ex-post monitoring in securitization. The use of guarantees reduces the dependence of banks' ex-post payoffs on monitoring efforts, thereby weakening monitoring incentives. The incentive to monitor under securitization with implicit guarantees is the weakest among all funding modes, as implicit guarantees allow banks to renege on their monitoring promises without being declared bankrupt and punished.

Despertar anestésico con remifentanilo versus sin remifentanilo en los pacientes del Hospital Vicente Corral Moscoso. Cuenca, 2013

OBJETIVO: Comparar el despertar anestésico con remifentanilo y sin remifentanilo en los pacientes sometidos a anestesia general. MATERIAL Y MÉTODOS: Se trata de un estudio clínico aleatorizado simple ciego de 140 pacientes sometidos a anestesia general balanceada. Se dividieron en dos grupos iguales, al grupo A (n=70) se le retiró el remifentanilo 10 minutos antes y el grupo B (n=70) recibió remifentanilo en infusión continua a dosis de 0.05 ug/kg/min hasta la extubación. RESULTADOS: Las variables edad, peso, talla, presión arterial media y frecuencia cardíaca basales entre ambos grupos no tuvieron diferencias estadísticamente significativas, con una p>0.05. En el grupo “A” durante el despertar anestésico, la presión arterial media en la extubación y 5 minutos después fueron mayores con respecto al grupo “B”, con una diferencia estadísticamente significativa (p=0.009 y p=0.01). La náusea fue el efecto adverso que presentó diferencia significativa en el grupo que recibió remifentanilo, con una p=0.023. El grupo que presentó con más frecuencia y más intensidad la tos fue el grupo “A”, con una p=0.047 y p=0.005 respectivamente. En cuanto a la frecuencia cardíaca y al tiempo del despertar no tuvieron diferencia en los grupos. CONCLUSIONES: El grupo que recibió remifentanilo tuvo una menor presión arterial media, frecuencia e intensidad de la tos, que el grupo que no recibió remifentanilo, con igual tiempo en el despertar y escasos efectos adversos

Effects of Ageratum Conyzoides on Semen Characteristics and Sperm Morphology in Rats Exposed to Sodium Arsenite

Arsenite is a major environmental toxicant that is well known to cause reproductive injury. The sperm protective potential of Ageratum conyzoides Linn in arsenic-treated rats was carried out in this study taking advantage of the antioxidant constituents and its androgenic activities. Twenty-four male albino rats aged 16 weeks, weighing 225 to 228g were used. They were grouped into 4(A-Da) with each group containing 6 rats. Group A was orally treated with 100mg/kg ethanol leaf extract of Ageratum conyzoides L., daily for 14 days, group B (single oral dose of sodium arsenite 2.5 mg/kg body weight), C (Ageratum conyzoides extract daily for 14 days and sodium arsenite (SA) given on the 14th day) and group D (Propylene glycol as negative control). It was observed that group B had a more lower (p<0.05) percentage motility (26.7±6.67%) when compared across the groups while group A had a significantly higher (p<0.05) mean value (63.3±3.33%). The sperm motility of rats in group D was significantly higher (p<0.05) than groups B and C. This implies that A. conyzoides extract had no adverse effect on the sperm motility of the rats and also ameliorates the adverse effect of arsenite on sperm motility. The mean value obtained for sperm liveability, semen volume and Sperm concentration followed a similar pattern although, the differences were not significant (p>0.05) for semen volume and the Sperm concentration of rats across the groups. The total sperm abnormality obtained across the groups ranges between 10.44 and 14.27% with group B treated with sodium arsenite (SA) having the highest value when compared with groups A and D, although, the differences were not significant (P>0.05). The study concluded that ethanol leaf extract of Ageratum conyzoides has no negative effect on sperm motility, liveability characteristics and morphology and also protected spermatozoa against arsenic reproductive toxicity in wistar strain albino rats..

Essays in Greenhouse/Nursery Economics

This dissertation focuses on the greenhouse and nursery industry in the United States. Two major issues are explored: irrigation and plant disease. The first two essays examine wireless soil-moisture sensor networks, an emerging technology that measures soil moisture and optimizes irrigation levels in real time. The first essay describes a study in which a nationwide survey of commercial growers was administered to generate estimates of grower demand and willingness to pay for sensor networks. We find that adoption rates for a base system and demand for expansion components are decreasing in price, as expected. The price elasticity of the probability of adoption suggests that sensor networks are likely to diffuse at a rate somewhat greater than that of drip irrigation. In the second essay, yields, time-to-harvest, and plant quality were analyzed to measure sensor network profitability. Sensor-based irrigation was found to increase revenue by 62% and profit by 65% per year. The third essay investigates greenhouse nursery growers’ response to a quarantine imposed on the west coast of the United States from 2002 to present for the plant pathogen that causes Sudden Oak Death. I investigate whether growers choose to 1) improve their sanitation practices, which reduces the underlying risk of disease without increasing the difficulty of detecting the pathogen, 2) increase fungicide use, which also prevents disease but makes existing infections much harder to detect, or 3) change their crop composition towards more resistant species. First, a theoretical model is derived to formalize hypotheses on grower responses to the quarantine, and then these predictions are empirically tested using several public data sources. I do not find evidence that growers improve their sanitation practices in response to the quarantine. I do, however, find evidence that growers heavily increase their fungicide use in response to a quarantine policy that requires visual (as opposed to laboratory) inspection for the disease before every crop shipment, suggesting that the quarantine may have the adverse effect of making the pathogen harder to identify. I also do find evidence that growers shift away from susceptible crops and towards resistant crops.

Optimization of Enzymes Inactivation in High Pressure Processes

The demand of highest quality foods in terms of taste and their properties preservation without the use of additives is constantly increasing. Consequently, new approaches to food processing have been developed, as for example high-pressure technology which has proven to be very valuable because it allows to maintain good properties of food like some vitamins and, at the same time, to reduce some undesirable bacteria. This technology avoids the use of high temperatures during the process (not like Pasteurization), which may have adverse effect on some nutritional properties of the food, its flavour, etc. The models for some enzymatic inactivations, which depend on the pressure and temperature profiles are presented. This work deals with the optimization of the inactivation of certain enzymes when high pressure treatment on food processing is applied. The optimization algorithms will minimize the inactivation not only of a certain isolated enzyme but also to several enzymes that can be involved simultaneously in the high-pressure process.

Efeitos secundários da quimioterapia antineoplásica e seu impacto na qualidade de vida em cães e gatos com doença oncológica

Mestrado Integrado em Medicina Veterinária