Some new Results for Additive Self-Dual Codes over GF(4)

* Supported by COMBSTRU Research Training Network HPRN-CT-2002-00278 and the Bulgarian National Science Foundation under Grant MM-1304/03.

Conditional probability calculations for the nonlinear Schrödinger equation with additive noise

The method for the computation of the conditional probability density function for the nonlinear Schrödinger equation with additive noise is developed. We present in a constructive form the conditional probability density function in the limit of small noise and analytically derive it in a weakly nonlinear case. The general theory results are illustrated using fiber-optic communications as a particular, albeit practically very important, example.

An Invitation to Additive Prime Number Theory

2000 Mathematics Subject Classification: 11D75, 11D85, 11L20, 11N05, 11N35, 11N36, 11P05, 11P32, 11P55.

Additive and multiplicative properties of scoring methods for preference aggregation

The paper reviews some additive and multiplicative properties of ranking procedures used for generalized tournaments with missing values and multiple comparisons. The methods analysed are the score, generalised row sum and least squares as well as fair bets and its variants. It is argued that generalised row sum should be applied not with a fixed parameter, but a variable one proportional to the number of known comparisons. It is shown that a natural additive property has strong links to independence of irrelevant matches, an axiom judged unfavourable when players have different opponents.

Is socioeconomic position early in life associated with physical activity during adulthood following the accumulation of risk model with additive effects?

L'activité physique améliore la santé, mais seulement 4.8% des Canadiens atteignent le niveau recommandé. La position socio-économique est un des déterminants de l'activité physique les plus importants. Elle est associée à l’activité physique de manière transversale à l’adolescence et à l’âge adulte. Cette thèse a tenté de déterminer s'il y a une association à long terme entre la position socio-économique au début du parcours de vie et l’activité physique à l’âge adulte. S'il y en avait une, un deuxième objectif était de déterminer quel modèle théorique en épidémiologie des parcours de vie décrivait le mieux sa forme. Cette thèse comprend trois articles: une recension systématique et deux recherches originales. Dans la recension systématique, des recherches ont été faites dans Medline et EMBASE pour trouver les études ayant mesuré la position socio-économique avant l'âge de 18 ans et l'activité physique à ≥18 ans. Dans les deux recherches originales, la modélisation par équations structurelles a été utilisée pour comparer trois modèles alternatifs en épidémiologie des parcours de vie: le modèle d’accumulation de risque avec effets additifs, le modèle d’accumulation de risque avec effet déclenché et le modèle de période critique. Ces modèles ont été comparés dans deux cohortes prospectives représentatives à l'échelle nationale: la 1970 British birth cohort (n=16,571; première recherche) et l’Enquête longitudinale nationale sur les enfants et les jeunes (n=16,903; deuxième recherche). Dans la recension systématique, 10 619 articles ont été passés en revue par deux chercheurs indépendants et 42 ont été retenus. Pour le résultat «activité physique» (tous types et mesures confondus), une association significative avec la position socio-économique durant l’enfance fut trouvée dans 26/42 études (61,9%). Quand seulement l’activité physique durant les loisirs a été considérée, une association significative fut trouvée dans 21/31 études (67,7%). Dans un sous-échantillon de 21 études ayant une méthodologie plus forte, les proportions d’études ayant trouvé une association furent plus hautes : 15/21 (71,4%) pour tous les types et toutes les mesures d’activité physique et 12/15 (80%) pour l’activité physique de loisir seulement. Dans notre première recherche originale sur les données de la British birth cohort, pour la classe sociale, nous avons trouvé que le modèle d’accumulation de risque avec effets additifs s’est ajusté le mieux chez les hommes et les femmes pour l’activité physique de loisir, au travail et durant les transports. Dans notre deuxième recherche originale sur les données canadiennes sur l'activité physique de loisir, nous avons trouvé que chez les hommes, le modèle de période critique s’est ajusté le mieux aux données pour le niveau d’éducation et le revenu, alors que chez les femmes, le modèle d’accumulation de risque avec effets additifs s’est ajusté le mieux pour le revenu, tandis que le niveau d’éducation ne s’est ajusté à aucun des modèles testés. En conclusion, notre recension systématique indique que la position socio-économique au début du parcours de vie est associée à la pratique d'activité physique à l'âge adulte. Les résultats de nos deux recherches originales suggèrent un patron d’associations le mieux représenté par le modèle d’accumulation de risque avec effets additifs.

Subtractive and additive manufacturing technology in moulding industry

This report is a review of additive and subtractive manufacturing techniques. This approach (additive manufacturing) has resided largely in the prototyping realm, where the methods of producing complex freeform solid objects directly from a computer model without part-specific tooling or knowledge. But these technologies are evolving steadily and are beginning to encompass related systems of material addition, subtraction, assembly, and insertion of components made by other processes. Furthermore, these various additive processes are starting to evolve into rapid manufacturing techniques for mass-customized products, away from narrowly defined rapid prototyping. Taking this idea far enough down the line, and several years hence, a radical restructuring of manufacturing could take place. Manufacturing itself would move from a resource base to a knowledge base and from mass production of single use products to mass customized, high value, life cycle products, majority of research and development was focused on advanced development of existing technologies by improving processing performance, materials, modelling and simulation tools, and design tools to enable the transition from prototyping to manufacturing of end use parts.

Investigation of additive effects in enantioselective copper-catalysed C-H insertion and aromatic addition reactions of α-diazocarbonyl compounds

Significant enhancements in enantioselectivities and reaction efficiencies in asymmetric copper-catalysed C-H insertion and aromatic addition reactions of α-diazocarbonyl compounds in the presence of various group I salts are reported. For the first time in carbenoid chemistry, evidence for the critical role of the metal cation is described.

Transferability of Regional Permafrost Disturbance Susceptibility Modelling Using Generalized Linear and Generalized Additive Models

To effectively assess and mitigate risk of permafrost disturbance, disturbance-p rone areas can be predicted through the application of susceptibility models. In this study we developed regional susceptibility models for permafrost disturbances using a field disturbance inventory to test the transferability of the model to a broader region in the Canadian High Arctic. Resulting maps of susceptibility were then used to explore the effect of terrain variables on the occurrence of disturbances within this region. To account for a large range of landscape charac- teristics, the model was calibrated using two locations: Sabine Peninsula, Melville Island, NU, and Fosheim Pen- insula, Ellesmere Island, NU. Spatial patterns of disturbance were predicted with a generalized linear model (GLM) and generalized additive model (GAM), each calibrated using disturbed and randomized undisturbed lo- cations from both locations and GIS-derived terrain predictor variables including slope, potential incoming solar radiation, wetness index, topographic position index, elevation, and distance to water. Each model was validated for the Sabine and Fosheim Peninsulas using independent data sets while the transferability of the model to an independent site was assessed at Cape Bounty, Melville Island, NU. The regional GLM and GAM validated well for both calibration sites (Sabine and Fosheim) with the area under the receiver operating curves (AUROC) N 0.79. Both models were applied directly to Cape Bounty without calibration and validated equally with AUROC's of 0.76; however, each model predicted disturbed and undisturbed samples differently. Addition- ally, the sensitivity of the transferred model was assessed using data sets with different sample sizes. Results in- dicated that models based on larger sample sizes transferred more consistently and captured the variability within the terrain attributes in the respective study areas. Terrain attributes associated with the initiation of dis- turbances were similar regardless of the location. Disturbances commonly occurred on slopes between 4 and 15°, below Holocene marine limit, and in areas with low potential incoming solar radiation

Process Monitoring and Defect Detection of Additive Manufacturing Using Inline Coherent Imaging

With applications ranging from aerospace to biomedicine, additive manufacturing (AM) has been revolutionizing the manufacturing industry. The ability of additive techniques, such as selective laser melting (SLM), to create fully functional, geometrically complex, and unique parts out of high strength materials is of great interest. Unfortunately, despite numerous advantages afforded by this technology, its widespread adoption is hindered by a lack of on-line, real time feedback control and quality assurance techniques. In this thesis, inline coherent imaging (ICI), a broadband, spatially coherent imaging technique, is used to observe the SLM process in 15 - 45 $\mu m$ 316L stainless steel. Imaging of both single and multilayer builds is performed at a rate of 200 $kHz$, with a resolution of tens of microns, and a high dynamic range rendering it impervious to blinding from the process beam. This allows imaging before, during, and after laser processing to observe changes in the morphology and stability of the melt. Galvanometer-based scanning of the imaging beam relative to the process beam during the creation of single tracks is used to gain a unique perspective of the SLM process that has been so far unobservable by other monitoring techniques. Single track processing is also used to investigate the possibility of a preliminary feedback control parameter based on the process beam power, through imaging with both coaxial and 100 $\mu m$ offset alignment with respect to the process beam. The 100 $\mu m$ offset improved imaging by increasing the number of bright A-lines (i.e. with signal greater than the 10 $dB$ noise floor) by 300\%. The overlap between adjacent tracks in a single layer is imaged to detect characteristic fault signatures. Full multilayer builds are carried out and the resultant ICI images are used to detect defects in the finished part and improve upon the initial design of the build system. Damage to the recoater blade is assessed using powder layer scans acquired during a 3D build. The ability of ICI to monitor SLM processes at such high rates with high resolution offers extraordinary potential for future advances in on-line feedback control of additive manufacturing.

Comparazione strutturale di componenti realizzati a terra e nello spazio mediante tecniche additive

Questo lavoro di tesi mira ad indagare, a livello preliminare, quali siano i vantaggi e gli svantaggi a livello strutturale legati alla possibilità di realizzare componenti per mezzi spaziali con tecnologie di Rapid Prototyping direttamente nello spazio: questa possibilità verrà confrontata con il caso in cui gli stessi componenti siano realizzati a terra e poi inviati nello spazio con un lanciatore. Nonostante si siano riscontrati dei limiti derivanti dalla carenza di dati tecnici sulle caratteristiche meccaniche dei materiali, è stata sviluppata una metodologia che ha fornito l’opportunità, seppur con grandi approssimazioni, di valutare il problema. Il punto di partenza dell’attività è stato quello di visionare figure ed immagini di mezzi spaziali e di scegliere alcuni componenti che possano essere oggetto di manutenzione o sostituzione in volo. Sei componenti sono stati poi modellati al CAD, ed è stata condotta un’analisi ad elementi finiti (FEM) mediante il software MSC Patran/Nastran, con lo scopo di simulare la risposta strutturale nelle diverse condizioni di carico prese in considerazione. Seppur a livello qualitativo e del tutto preliminare, sono stati svolti dei confronti in termini di massa e tensioni per valutare in quali casi sembra sia conveniente realizzare un componente a terra con tecnologie tradizionali, e in quali sembra sia vantaggioso utilizzare nuove tecnologie di prototipazione rapida stampando direttamente il componente nello spazio.

Expanding the Design Space: Forging the Transition from 3D Printing to Additive Manufacturing

Thesis (Master's)--University of Washington, 2016-08

Evaluation of Select Food Additive Exposures in Children with Crohn's Disease

Thesis (Master's)--University of Washington, 2016-09

Mixing performance evaluation of additive manufactured milli-scale reactors

The mixing performance of three passive milli-scale reactors with different geometries was investigated at different Reynolds numbers. The effects of design and operating characteristics such as mixing channel shape and volume flow rate were investigated. The main objective of this work was to demonstrate a process design method that uses on Computational Fluid Dynamics (CFD) for modeling and Additive Manufacturing (AM) technology for manufacture. The reactors were designed and simulated using SolidWorks and Fluent 15.0 software, respectively. Manufacturing of the devices was performed with an EOS M-series AM system. Step response experiments with distilled Millipore water and sodium hydroxide solution provided time-dependent concentration profiles. Villermaux-Dushman reaction experiments were also conducted for additional verification of CFD results and for mixing efficiency evaluation of the different geometries. Time-dependent concentration data and reaction evaluation showed that the performance of the AM-manufactured reactors matched the CFD results reasonably well. The proposed design method allows the implementation of new and innovative solutions, especially in the process design phase, for industrial scale reactor technologies. In addition, rapid implementation is another advantage due to the virtual flow design and due to the fast manufacturing which uses the same geometric file formats.

How to deal with uncertainties regarding the occupational exposure to antineoplastic mixtures: additive effect should always be considered?

Risk assessment considerations - The concept that “safe levels of exposure” for humans can be identified for individual chemicals is central to the risk assessment of compounds with known toxicological profiles. Selection of agents for combination chemotherapy regimens involves minimize overlapping of mechanisms of action, antitumor activity and toxicity profile. Although the toxicological profile and mechanism of action of each individual drug is well characterized, the toxicological interactions between drugs are likely, but poorly established at occupational exposure context. The synergistic nature of interactions may help in understanding the adverse health effects observed in healthcare workers, where exposure situations are characterized by complex mixtures of chemical agents, and the levels of individual exposing agents are often not sufficiently high to explain the health complaints. However, if a substance is a genotoxic carcinogen, this would be the “lead effect”; normally, no OEL based on a NOEL would be derived and the level would be set so low that it would be unlikely that other effects would be expected. Aim of the study - Recently research project developed in Portuguese Hospitals characterize the occupational exposure to antineoplastic agents and the health effects related. The project aimed to assess exposure of the different risk groups that handle antineoplastic agents in the hospital setting, namely during preparation and administration of these drugs. Here it is presented and discussed the results in a study developed in two hospitals from Lisbon.

A Study of the State of the Art of Process Planning for Additive Manufacturing

In the manufacturing industry the term Process Planning (PP) is concerned with determining the sequence of individual manufacturing operations needed to produce a given part or product with a certain machine. In this technical report we propose a preliminary analysis of scientific literature on the topic of process planning for Additive Manufacturing (AM) technologies (i.e. 3D printing). We observe that the process planning for additive manufacturing processes consists of a small set of standard operations (repairing, orientation, supports, slicing and toolpath generation). We analyze each of them in order to emphasize the most critical aspects of the current pipeline as well as highlight the future challenges for this emerging manufacturing technology.