Paranoia in the General Population : a revised version of the General Paranoia Scale for Adults

Background: Paranoid ideation has been regarded as a cognitive and a social process used as a defence against perceived threats. According to this perspective, paranoid ideation can be understood as a process extending across the normal-pathological continuum. Methods: In order to refine the construct of paranoid ideation and to validate a measure of paranoia, 906 Portuguese participants from the general population and 91 patients were administered the General Paranoia Scale (GPS), and two conceptual models (one - and tridimensional) were compared through confirmatory factor analysis (CFA). Results: Results from the CFA of the GPS confirmed a different model than the one-dimensional model proposed by Fenigstein and Vanable, which com-prised three dimensions (mistrust thoughts, persecutory ideas, and self-deprecation). This alternative model presented a better fit and increased sensitivity when compared with the one-dimensional model. Further data analysis of the scale revealed that the GPS is an adequate assessment tool for adults, with good psychometric characteristics and high internal consistency. Conclusion: The model proposed in the current work leads to further refinements and enrichment of the construct of paranoia in different populations, allowing the assessment of three dimensions of paranoia and the risk of clinical paranoia in a single measure for the general population.

Paranoia in the General Population : a revised version of the General Paranoia Scale for adolescents

The aim of the current study was to validate the General Paranoia Scale for Portuguese Adolescents population (GPS-A). This scale assesses the paranoid ideation in non-clinical population. Results from a confirmatory factor analysis of the scale on 1218 youths confirmed an alternative model to the one-dimensional model proposed by Fenigstein and Vanable (1992) comprising three different dimensions (Mistrust thoughts, persecutory ideas and depreciation). This alternative model presented a good fit: χ2 (162)= 727.200, p = .000; CFI = .925; RMSEA = .054, P(rmsea ≤0.05) = .000; PCFI = .788; AIC = 863.200. All items presented adequate factor loadings (λij ≥0.5) and individual reliability ((λij)2 ≥0.25). Further data analysis on the scale revealed that the GPS-A is an adequate assessment tool for adolescents, with good psychometric characteristics and high internal consistency.

Cultural adaptation and psychometric properties of Brazilian Need for Recovery Scale

OBJECTIVE: To translate the Need for Recovery Scale (NFR) into Brazilian Portuguese and culturally adapt it and assess the stability, internal consistency and convergent validity of the Brazilian scale among industrial workers. METHODS: The translation process followed the guidelines for cultural adaptation of questionnaires including the steps of translation, synthesis, back translation, expert committee review, and pre-testing. The Brazilian Portuguese NFR, final version (Br-NFR) was assessed for stability (n=52) and internal consistency (n=192) and for convergent validity through simultaneous assessment with other instruments: the Borg Scale (n=59); the Chalder Fatigue Questionnaire (n=57) and 3 subscales of the SF-36 (n=56). RESULTS: Stability and internal consistency met the criterion for a reliable measure (ICC=0.80 and Cronbach's alpha =0.87, respectively). The convergent validity between Br-NFR and other instruments also showed good results: Borg Scale (r= 0.64); Chalder Questionnaire (r= 0.67); SF-36 subscales: vitality (r= -0.84), physical functioning (r= -0.54), and role-physical (r= -0.47). CONCLUSIONS: The Br-NFR proved to be a reliable instrument to evaluate work-related fatigue symptoms in industrial workers. Furthermore, it showed significant and good correlations with well-established instruments such as the Borg Scale, the Chalder Questionnaire and SF-36 vitality subscale, supporting the validity of the Br-NFR.

Contributo para a validação de uma escala pediátrica, Peabody Developmental Motor Scale-2 (versão portuguesa)

Mestrado em Fisioterapia

Proposal of a short-form version of the Brazilian Food Insecurity Scale

OBJECTIVE To propose a short version of the Brazilian Food Insecurity Scale. METHODS Two samples were used to test the results obtained in the analyses in two distinct scenarios. One of the studies was composed of 230 low income families from Pelotas, RS, Southern Brazil, and the other was composed of 15,575 women, whose data were obtained from the 2006 National Survey on Demography and Health. Two models were tested, the first containing seven questions, and the second, the five questions that were considered the most relevant ones in the concordance analysis. The models were compared to the Brazilian Food Insecurity Scale, and the sensitivity, specificity and accuracy parameters were calculated, as well as the kappa agreement test. RESULTS Comparing the prevalence of food insecurity between the Brazilian Food Insecurity Scale and the two models, the differences were around 2 percentage points. In the sensitivity analysis, the short version of seven questions obtained 97.8% and 99.5% in the Pelotas sample and in the National Survey on Demography and Health sample, respectively, while specificity was 100% in both studies. The five-question model showed similar results (sensitivity of 95.7% and 99.5% in the Pelotas sample and in the National Survey on Demography and Health sample, respectively). In the Pelotas sample, the kappa test of the seven-question version totaled 97.0% and that of the five-question version, 95.0%. In the National Survey on Demography and Health sample, the two models presented a 99.0% kappa. CONCLUSIONS We suggest that the model with five questions should be used as the short version of the Brazilian Food Insecurity Scale, as its results were similar to the original scale with a lower number of questions. This version needs to be administered to other populations in Brazil in order to allow for the adequate assessment of the validity parameters.

Assessment of climate change statistical downscaling methods: Application and comparison of two statistical methods to a single site in Lisbon

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do grau de Mestre em Engenharia do Ambiente

The contribution of multitemporal information from multispectral satellite images for automatic land cover classification at the national scale

Thesis submitted to the Instituto Superior de Estatística e Gestão de Informação da Universidade Nova de Lisboa in partial fulfillment of the requirements for the Degree of Doctor of Philosophy in Information Management – Geographic Information Systems

Integrated ecological-economic modelling and assessment aproach for coastal ecosystem management

Thesis submitted to the Faculty of Sciences and Technology, New University of Lisbon, for the degree of Doctor of Philosophy in Environmental Sciences

Experimental assessment of pressure drop in air stripping columns

One important step in the design of air stripping operations for the removal of VOC is the choice of operating conditions, which are based in the phase ratio. This parameter sets on directly the stripping factor and the efficiency of the operation. Its value has an upper limit determined by the flooding regime, which is previewed using empirical correlations, namely the one developed by Eckert. This type of approach is not suitable for the development of algorithms. Using a pilot scale column and a convenient solution, the pressure drop was determined in different operating conditions and the experimental values were compared with the estimations. This particular research will be incorporated in a global model for simulating the dynamics of air stripping using a multi variable distributed parameter system.

Assessment of Notch1 ligands production - key protein targets in breast cancer

Cell-to-cell communication is required for many biological processes in development and adult life. One of the most common systems utilized by a wide range of eukaryotes is the Notch signalling pathway. Four Notch receptors and five ligands have been identified in mammals that interact via their extracellular domains leading to transcription activation. Studies have shown that the Notch ligands expression is undetectable in normal breast tissues, but moderate to high expression has been detected in breast cancer. Thus, any of the Notch1 ligands can be studied as possible therapeutic targets for breast cancer. To study Notch pathway proteins there is the need to obtain stable protein solutions. E. coli is the host of excellence for recombinant proteins for the ease of use, fast growth and high cell densities. However, the expression of mammalian proteins in such systems may overwhelm the bacterial cellular machinery, which does not possess the ability for post-translational modifications, or dedicated compartments for protein synthesis. Mammalian cells are therefore preferred, despite their technical and financial increased demands. We aim to determine the best expression and purification conditions for the different ligand protein constructs, to develop specific function-blocking antibodies using the Phage Display technology. Moreover, we propose to crystallize the Notch1 ligands alone and in complex with the phage display selected antibodies, unveiling molecular details. hJag2DE3 and hDll1DE6 proteins were purified from refolded inclusion bodies or mammalian cell culture supernatants, respectively, and purity was confirmed by SDS-PAGE (>95%). Protein produced in mammalian cells showed to be more stable, apparently with the physiological disulfide pattern, contrary to what was observed in the refolded protein. Several nano-scale crystallization experiments were set up in 96-well plates, but no positive result was obtained. We will continue to pursue for the best expression for the Notch ligand constructs in both expression systems.

Needs assessment of people with severe mental illnesses and their families in Azerbaijan

RESUMO: Os indivíduos com doença mental grave, assim como os seus familiares, podem ser caracterizados como uma população em que ocorre uma combinação complexa de necessidades médicas e psicossociais, nomeadamente a nível do diagnóstico e do acesso aos serviços de saúde mental. A avaliação de necessidades pode fornecer informações importantes para o desenvolvimento de intervenções eficazes, tanto a nível da população como a nível individual. Este estudo teve como objetivo determinar as diferentes necessidades reportadas pelos pacientes com doença mental grave e seus familiares , assim como investigar as possíveis relações entre o estado de necessidades e as variáveis sócio-demográficas e clínicas. Simultaneamente, o estudo teve como objetivo avaliar a sobrecarga familiar e a satisfação dos utentes com os serviços de saúde mental. Foi elaborado um estudo transversal, realizado numa amostra de conveniência de cinquenta díades de paciente/membro da família, seguidos em regime de ambulatório no Centro Nacional de Saúde Mental. Foram utilizados como instrumentos de avaliação um questionário sociodemográfico, a Escala Breve de Avaliação Psiquiátrica (BPRS), o questionário de Avaliação de Necessidades de Camberwell (CAN), o Questionário de Avaliação do Envolvimento (IEQ) e a Escala de Verona de Satisfação com os Serviços (VSSS). As mais frequentes necessidades não-satisfeitas foram o ‘sofrimento psicológico’, as ‘atividades sociais’ e os ‘benefícios sociais’. O estudo mostrou uma sobrecarga significativa nas famílias que cuidam de pessoas com doença mental grave, que se correlacionou com as suas opiniões sobre as necessidades dos pacientes e teve um impacto negativo sobre o bem-estar psicológico. Os três mais importantes predictores de sofrimento psíquico em familiares foram o sexo, a situação laboral e a relação com o paciente. A avaliação da satisfação com os serviços revelou a existência de um hiato significativo entre os serviços prestados e os serviços desejados, reportados pelos pacientes e seus familiares. A maioria dos participantes do estudo desejavam ter um trabalho protegido, ou receber ajuda para encontrar emprego. Os resultados deste estudo poderão ser usados para fins de planeamento desenvolvimento e avaliação de serviços de saúde mental no Azerbeijão. Algumas recomendações sobre a melhoria dos serviços de saúde mental para pacientes com doença mental grave e suas famílias são feitas na secção final do trabalho.----------ABSTRACT: Patients suffering from severe mental illness, in addition to their family members, may be characterized as a population with a complex combination of medical and psychosocial needs, which are under-recognized and under-addressed by mental health services. At the same time, needs assessment provides important information necessary for developing effective interventions at both population and individual level. The study was aimed to determine various needs perceived by patients with SMI and their family members, as well as to find out possible relations between the needs and socio-demographic and clinical variables. Similarly the study was intended to evaluate family burden and users’ satisfaction with services. This was a cross-sectional study conducted on a convenience sample. Fifty dyads of a patient and family member applying for out-patient services to the National Mental Health Centre participated in the study. Sociodemographic questionnaire, Brief Psychiatric Rating Scale, Camberwell Assessment of Need, Involvement Evaluation Questionnaire, and Verona Service Satisfaction Scale were used as assessment tools. The most prominent unmet needs reported by people with SMI and their relatives were psychological distress, social activities and welfare benefits. The study showed significant burden in families caring for people with SMI, which correlated with their views about patients’ needs and had a negative impact on the psychological well-being. The three most important predictors of psychological distress in family members were gender, employment status and relationship to patient. Evaluation of satisfaction with services pointed out the gap between provided and desired services reported by patients and their relatives. Most of study participants wished to have sheltered work, or receive help in finding employment. The results of this study may be used for the purposes of mental health service planning, development and evaluation in our country. Some recommendations on improvement of mental health services for patients with SMI and their families have been made in the conclusion.

Application of geographic information system and modelling in health impact assessment for urban road mobility in Vietnam

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

Introducing mapping standards in the quality assessment of buildings extracted from very high resolution satellite imagery

Many municipal activities require updated large-scale maps that include both topographic and thematic information. For this purpose, the efficient use of very high spatial resolution (VHR) satellite imagery suggests the development of approaches that enable a timely discrimination, counting and delineation of urban elements according to legal technical specifications and quality standards. Therefore, the nature of this data source and expanding range of applications calls for objective methods and quantitative metrics to assess the quality of the extracted information which go beyond traditional thematic accuracy alone. The present work concerns the development and testing of a new approach for using technical mapping standards in the quality assessment of buildings automatically extracted from VHR satellite imagery. Feature extraction software was employed to map buildings present in a pansharpened QuickBird image of Lisbon. Quality assessment was exhaustive and involved comparisons of extracted features against a reference data set, introducing cartographic constraints from scales 1:1000, 1:5000, and 1:10,000. The spatial data quality elements subject to evaluation were: thematic (attribute) accuracy, completeness, and geometric quality assessed based on planimetric deviation from the reference map. Tests were developed and metrics analyzed considering thresholds and standards for the large mapping scales most frequently used by municipalities. Results show that values for completeness varied with mapping scales and were only slightly superior for scale 1:10,000. Concerning the geometric quality, a large percentage of extracted features met the strict topographic standards of planimetric deviation for scale 1:10,000, while no buildings were compliant with the specification for scale 1:1000.

Implementation of a probabilistic based framework for safety assessment of existing timber elements

The assessment of existing timber structures is often limited to information obtained from non or semi destructive testing, as mechanical testing is in many cases not possible due to its destructive nature. Therefore, the available data provides only an indirect measurement of the reference mechanical properties of timber elements, often obtained through empirical based correlations. Moreover, the data must result from the combination of different tests, as to provide a reliable source of information for a structural analysis. Even if general guidelines are available for each typology of testing, there is still a need for a global methodology allowing to combine information from different sources and infer upon that information in a decision process. In this scope, the present work presents the implementation of a probabilistic based framework for safety assessment of existing timber elements. This methodology combines information gathered in different scales and follows a probabilistic framework allowing for the structural assessment of existing timber elements with possibility of inference and updating of its mechanical properties, through Bayesian methods. The probabilistic based framework is based in four main steps: (i) scale of information; (ii) measurement data; (iii) probability assignment; and (iv) structural analysis. In this work, the proposed methodology is implemented in a case study. Data was obtained through a multi-scale experimental campaign made to old chestnut timber beams accounting correlations of non and semi-destructive tests with mechanical properties. Finally, different inference scenarios are discussed aiming at the characterization of the safety level of the elements.

Assessment of the efficiency of prefabricated hybrid composite plates (HCPs) for retrofitting of damaged interior RC beam–column joints

The effectiveness of prefabricated hybrid composite plates (HCPs) as a seismic retrofitting solution for damaged interior RC beam-column joints is experimentally studied. HCP is composed of a thin plate made of strain hardening cementitious composite (SHCC) reinforced with CFRP sheets/laminates. Two full-scale severely damaged interior beam-column joints are retrofitted using two different configurations of HCPs. The effectiveness of these retrofitting solutions mainly in terms of hysteretic response, dissipated energy, degradation of secant stiffness, displacement ductility and failure modes are compared to their virgin states. According to these criteria, both solutions resulted in superior responses regarding the ones registered in their virgin states.