La pelota no se mancha: Un estudio histórico sobre el desarrollo y la política en FIFA

Esta investigación se centra en la Fédération Internationale de Football Association (FIFA) como organización política. Intenta responder dos interrogantes primordiales: 1) ¿cómo la FIFA ha constituido el poder que tiene actualmente y, así, hacerse del monopolio indiscutido del fútbol? Y 2) ¿cómo ha cambiado en el tiempo la política interna de FIFA y su vínculo con la política internacional? Para lograr esto, se realiza un estudio histórico, basado principalmente en documentos, que intenta caracterizar y analizar los cambios de la organización en el tiempo. Se enfatizan las últimas dos presidencias de FIFA, de João Havelange y Joseph Blatter, como casos de estudio.

Desarrollo sostenible : una meta para el entorno educativo : becas de investigación didáctica patrocinadas por El Corte Inglés.

Concurso de becas: Investiga a través del entorno y exponlo. Contiene un folleto anexo con las bases de la XIX edición del concurso, para el curso 2005-06

Improving flood models using LiDAR: progress and problems

Airborne scanning laser altimetry (LiDAR) is an important new data source for river flood modelling. LiDAR can give dense and accurate DTMs of floodplains for use as model bathymetry. Spatial resolutions of 0.5m or less are possible, with a height accuracy of 0.15m. LiDAR gives a Digital Surface Model (DSM), so vegetation removal software (e.g. TERRASCAN) must be used to obtain a DTM. An example used to illustrate the current state of the art will be the LiDAR data provided by the EA, which has been processed by their in-house software to convert the raw data to a ground DTM and separate vegetation height map. Their method distinguishes trees from buildings on the basis of object size. EA data products include the DTM with or without buildings removed, a vegetation height map, a DTM with bridges removed, etc. Most vegetation removal software ignores short vegetation less than say 1m high. We have attempted to extend vegetation height measurement to short vegetation using local height texture. Typically most of a floodplain may be covered in such vegetation. The idea is to assign friction coefficients depending on local vegetation height, so that friction is spatially varying. This obviates the need to calibrate a global floodplain friction coefficient. It’s not clear at present if the method is useful, but it’s worth testing further. The LiDAR DTM is usually determined by looking for local minima in the raw data, then interpolating between these to form a space-filling height surface. This is a low pass filtering operation, in which objects of high spatial frequency such as buildings, river embankments and walls may be incorrectly classed as vegetation. The problem is particularly acute in urban areas. A solution may be to apply pattern recognition techniques to LiDAR height data fused with other data types such as LiDAR intensity or multispectral CASI data. We are attempting to use digital map data (Mastermap structured topography data) to help to distinguish buildings from trees, and roads from areas of short vegetation. The problems involved in doing this will be discussed. A related problem of how best to merge historic river cross-section data with a LiDAR DTM will also be considered. LiDAR data may also be used to help generate a finite element mesh. In rural area we have decomposed a floodplain mesh according to taller vegetation features such as hedges and trees, so that e.g. hedge elements can be assigned higher friction coefficients than those in adjacent fields. We are attempting to extend this approach to urban area, so that the mesh is decomposed in the vicinity of buildings, roads, etc as well as trees and hedges. A dominant points algorithm is used to identify points of high curvature on a building or road, which act as initial nodes in the meshing process. A difficulty is that the resulting mesh may contain a very large number of nodes. However, the mesh generated may be useful to allow a high resolution FE model to act as a benchmark for a more practical lower resolution model. A further problem discussed will be how best to exploit data redundancy due to the high resolution of the LiDAR compared to that of a typical flood model. Problems occur if features have dimensions smaller than the model cell size e.g. for a 5m-wide embankment within a raster grid model with 15m cell size, the maximum height of the embankment locally could be assigned to each cell covering the embankment. But how could a 5m-wide ditch be represented? Again, this redundancy has been exploited to improve wetting/drying algorithms using the sub-grid-scale LiDAR heights within finite elements at the waterline.

Calibrating flood inundation models: identifying and addressing uncertainty in satellite observed flood extents

Improvements in the resolution of satellite imagery have enabled extraction of water surface elevations at the margins of the flood. Comparison between modelled and observed water surface elevations provides a new means for calibrating and validating flood inundation models, however the uncertainty in this observed data has yet to be addressed. Here a flood inundation model is calibrated using a probabilistic treatment of the observed data. A LiDAR guided snake algorithm is used to determine an outline of a flood event in 2006 on the River Dee, North Wales, UK, using a 12.5m ERS-1 image. Points at approximately 100m intervals along this outline are selected, and the water surface elevation recorded as the LiDAR DEM elevation at each point. With a planar water surface from the gauged upstream to downstream water elevations as an approximation, the water surface elevations at points along this flooded extent are compared to their ‘expected’ value. The pattern of errors between the two show a roughly normal distribution, however when plotted against coordinates there is obvious spatial autocorrelation. The source of this spatial dependency is investigated by comparing errors to the slope gradient and aspect of the LiDAR DEM. A LISFLOOD-FP model of the flood event is set-up to investigate the effect of observed data uncertainty on the calibration of flood inundation models. Multiple simulations are run using different combinations of friction parameters, from which the optimum parameter set will be selected. For each simulation a T-test is used to quantify the fit between modelled and observed water surface elevations. The points chosen for use in this T-test are selected based on their error. The criteria for selection enables evaluation of the sensitivity of the choice of optimum parameter set to uncertainty in the observed data. This work explores the observed data in detail and highlights possible causes of error. The identification of significant error (RMSE = 0.8m) between approximate expected and actual observed elevations from the remotely sensed data emphasises the limitations of using this data in a deterministic manner within the calibration process. These limitations are addressed by developing a new probabilistic approach to using the observed data.

Calibrating flood inundation models: methods for assessing model performance

Satellite observed data for flood events have been used to calibrate and validate flood inundation models, providing valuable information on the spatial extent of the flood. Improvements in the resolution of this satellite imagery have enabled indirect remote sensing of water levels by using an underlying LiDAR DEM to extract the water surface elevation at the flood margin. Further to comparison of the spatial extent, this now allows for direct comparison between modelled and observed water surface elevations. Using a 12.5m ERS-1 image of a flood event in 2006 on the River Dee, North Wales, UK, both of these data types are extracted and each assessed for their value in the calibration of flood inundation models. A LiDAR guided snake algorithm is used to extract an outline of the flood from the satellite image. From the extracted outline a binary grid of wet / dry cells is created at the same resolution as the model, using this the spatial extent of the modelled and observed flood can be compared using a measure of fit between the two binary patterns of flooding. Water heights are extracted using points at intervals of approximately 100m along the extracted outline, and the students T-test is used to compare modelled and observed water surface elevations. A LISFLOOD-FP model of the catchment is set up using LiDAR topographic data resampled to the 12.5m resolution of the satellite image, and calibration of the friction parameter in the model is undertaken using each of the two approaches. Comparison between the two approaches highlights the sensitivity of the spatial measure of fit to uncertainty in the observed data and the potential drawbacks of using the spatial extent when parts of the flood are contained by the topography.

Cooled filters 16-42µm for FIR astronomy

The design and manufacture of dielectric-film interference filters for cooled FIR stronmy is described. The bands are 16.5-21.5µm, 17.5-19.5µm, 19.5-21.5µm and 27µm cut on. The films are PbTe/CdSe and the substrates are CdTe (some 1/2 mm thick), without absorption in the region: KRS-6 films are used for antireflection.

Natal nest locations of the Asian house rat (Rattus tanezumi) in lowland rice–coconut cropping systems: a coconut penthouse or rice bunds with water frontage?

CONTEXT. Rattus tanezumi is a serious crop pest within the island of Luzon, Philippines. In intensive flood-irrigated rice field ecosystems of Luzon, female R. tanezumi are known to primarily nest within the tillers of ripening rice fields and along the banks of irrigation canals. The nesting habits of R. tanezumi in complex rice–coconut cropping systems are unknown. AIMS. To identify the natal nest locations of R. tanezumi females in rice–coconut systems of the Sierra Madre Biodiversity Corridor (SMBC), Luzon, during the main breeding season to develop a management strategy that specifically targets their nesting habitat. METHODS. When rice was at the booting to ripening stage, cage-traps were placed in rice fields adjacent to coconut habitat. Thirty breeding adult R. tanezumi females were fitted with radio-collars and successfully tracked to their nest sites. KEY RESULTS. Most R. tanezumi nests (66.7%) were located in coconut groves, five nests (16.7%) were located in rice fields and five nests (16.7%) were located on the rice field edge. All nests were located above ground level and seven nests were located in coconut tree crowns. The median distance of nest sites to the nearest rice field was 22.5m. Most nest site locations had good cover of ground vegetation and understorey vegetation, but low canopy cover. Only one nest location had an understorey vegetation height of less than 20 cm. CONCLUSIONS. In the coastal lowland rice–coconut cropping systems of the SMBC, female R. tanezumi showed a preference for nesting in adjacent coconut groves. This is contrary to previous studies in intensive flood-irrigated rice ecosystems of Luzon, where the species nests mainly in the banks of irrigation canals. It is important to understand rodent breeding ecology in a specific ecosystem before implementing appropriate management strategies. IMPLICATIONS. In lowland rice–coconut cropping systems, coconut groves adjacent to rice fields should be targeted for the 20 management of R. tanezumi nest sites during the main breeding season as part of an integrated ecologically based approach to rodent pest management.

Exposure to parabens at the concentration of maximal proliferative response increases migratory and invasive activity of human breast cancer cells in vitro

Alkyl esters of p–hydroxybenzoic acid (parabens) are widely used as preservatives in personal care products, foods and pharmaceuticals. Their oestrogenic activity, their measurement in human breast tissue and their ability to drive proliferation of oestrogen-responsive human breast cancer cells has opened a debate on their potential to influence breast cancer development. Since proliferation is not the only hallmark of cancer cells, we have investigated the effects of exposure to parabens at concentrations of maximal proliferative response on migratory and invasive properties using three oestrogen-responsive human breast cancer cell lines (MCF-7, T-47-D, ZR-75-1). Cells were maintained short-term (1 week) or long-term (20±2 weeks) in phenol-red-free medium containing 5% charcoal-stripped serum with no addition, 10-8M 17-oestradiol, 1-5x10-4M methylparaben, 10-5M n-propylparaben or 10-5M n-butylparaben. Long-term exposure (20±2 weeks) of MCF-7 cells to methylparaben, n-propylparaben or n-butylparaben increased migration as measured using a scratch assay, time-lapse microscopy and xCELLigence technology: invasive properties were found to increase in matrix degradation assays and migration through matrigel on xCELLigence. Western immunoblotting showed an associated downregulation of E-cadherin and -catenin in the long-term paraben-exposed cells which could be consistent with a mechanism involving epithelial to mesenchymal transition. Increased migratory activity was demonstrated also in long-term paraben-exposed T-47-D and ZR-75-1 cells using a scratch assay and time-lapse microscopy. This is the first report that in vitro, parabens can influence not only proliferation but also migratory and invasive properties of human breast cancer cells.

Validation of Canopy Height Profile methodology for small-footprint full-waveform airborne LiDAR data in a discontinuous canopy environment

A Canopy Height Profile (CHP) procedure presented in Harding et al. (2001) for large footprint LiDAR data was tested in a closed canopy environment as a way of extracting vertical foliage profiles from LiDAR raw-waveform. In this study, an adaptation of this method to small-footprint data has been shown, tested and validated in an Australian sparse canopy forest at plot- and site-level. Further, the methodology itself has been enhanced by implementing a dataset-adjusted reflectance ratio calculation according to Armston et al. (2013) in the processing chain, and tested against a fixed ratio of 0.5 estimated for the laser wavelength of 1550nm. As a by-product of the methodology, effective leaf area index (LAIe) estimates were derived and compared to hemispherical photography-derived values. To assess the influence of LiDAR aggregation area size on the estimates in a sparse canopy environment, LiDAR CHPs and LAIes were generated by aggregating waveforms to plot- and site-level footprints (plot/site-aggregated) as well as in 5m grids (grid-processed). LiDAR profiles were then compared to leaf biomass field profiles generated based on field tree measurements. The correlation between field and LiDAR profiles was very high, with a mean R2 of 0.75 at plot-level and 0.86 at site-level for 55 plots and the corresponding 11 sites. Gridding had almost no impact on the correlation between LiDAR and field profiles (only marginally improvement), nor did the dataset-adjusted reflectance ratio. However, gridding and the dataset-adjusted reflectance ratio were found to improve the correlation between raw-waveform LiDAR and hemispherical photography LAIe estimates, yielding the highest correlations of 0.61 at plot-level and of 0.83 at site-level. This proved the validity of the approach and superiority of dataset-adjusted reflectance ratio of Armston et al. (2013) over a fixed ratio of 0.5 for LAIe estimation, as well as showed the adequacy of small-footprint LiDAR data for LAIe estimation in discontinuous canopy forests.

The effects of UV radiation on photosynthesis estimated as chlorophyll fluorescence in Zygnemopsis decussata (Chlorophyta) growing in a high mountain lake (Sierra Nevada, Southern Spain)

The effect of increased UV radiation on photosynthesis estimated as in vivo chlorophyll fluorescence i.e. optimal quantum yield (F(v)/F(m)) and electron transport rate (ETR) in the green filamentous alga Zygnemopsis decussata (Streptophyta, Zygnematales) growing in the high mountain lake ""La Caldera"" (Sierra Nevada, Spain) at 3050 m altitude was evaluated. Two sets of in situ experiments were conducted: (1) On July 2006, F(v)/F(m) was measured throughout the day at different depths (0.1, 0.25, 0.5 and 1 m) and in the afternoon. ETR and phenolic compounds were determined. In addition, in order to analyze the effect of UV radiation, F(v)/F(m) was determined in algae incubated for 3 days at 0.5m under three different light treatments: PAR+UVA+UVB (PAB). PAR+UVA (PA) and PAR (P). (2) On August 2007, F(v)/F(m) was determined under PAB, PA and P treatments and desiccation/rehydration conditions. F(v)/F(m) decreased in algae growing in surface waters (0.1 m) but also at 1 m depth compared to that at 0.5 in depth. The decrease of F(v)/F(m) at noon due to photoinhibition was small (less than 10%) except in algae growing at 1 m depth (44%). The maximal electron transport rate was 3.5-5 times higher in algae growing at 0.25-0.5 m respectively than that at 0.1 and 1 m depth. These results are related to the accumulation of phenolic compounds: i.e. the algae at 0.25-0.5 in presentedrespectively about a 3-5 times higher concentration of phenolic compounds than that of algae at 0.1-1 m depth. The protection mechanisms seem to be stimulated by UVB radiation, since F(v)/F(m) was higher in the presence of UVB (PAB treatment) compared to PA or P treatments. UVA exerts the main photoinhibitory effect, not Only at midday, but also in the afternoon. UVB radiation also had a protective effect in algae grown under desiccation conditions for three days. During re-hydration, the rapid increase of F(v)/F(m) (after 1 h) was higher in the UVB-grown algae than in algae grown under UVA radiation. After 5 h. F(v)/F(m) values were similar in algae submitted to desiccation/rehydration under PAB and P treatments as they were in the control (submerged algae). The combined effect of desiccation and UVA produced the greatest decrease of photosynthesis in Z. decussata. Thifs UVB, in contrast to other species, may support the recovery process. Z. decussata can acclimate to severe stress, conditions in this high mountain lake by the photoprotection mechanism induced by UVB radiation through dynamic photoinhibition and the accumulation of phenolic compounds (UV screen and antioxidant substances).

Bildupplösning inom digitaltryck : - Var går gränsen för en fullgod bildkvalitet?

Examensarbetet har gjorts utifrån Arkitektkopia AB:s vägnar för att undersöka gränsvärden för bildupplösning inom digi-taltryck med bibehållen bildkvalitet. Detta för att om möjligt höja produktionshastigheten då en lägre bildupplösning ger en mindre filstorlek som går fortare att cmykseparera i RIP:en. Dessutom behövde Arkitektkopia AB en korrigering och uppdatering av sin dåvarande tabell för kundrekommendationer beträffande bildupplösning för olika format och betrakt-ningsavstånd. En visuell undersökning med Arkitektkopias kunder och privatpersoner har gjorts för att kunna fastställa riktvärden för bildupplösning och utröna toleransen för en godtagbar bildkvalitet. Resultaten utifrån kundundersökningen har legat till grund för den nya tabellen med kundrekommendationer som examensarbetet resulterat i. Undersökningen omfattade tre provgrupper i formaten A4, 70x100cm och 70x100cm (motsv. 135x180cm) med betrakt-ningsavstånden 30cm, 2m och 5m. Dessutom innefattade de tre provgrupperna två olika typer av bildmotiv. Endast färg-bilder ingick i undersökningen.Resultaten utifrån undersökningen visar på att bildupplösningen kan sänkas avsevärt jämfört med tidigare kundrekommen-dationer. Störst variationer återfanns för formatet A4 med ett betraktningsavstånd på 30cm (läsavstånd). Där var toleransen för en godtagbar bildkvalitet något högre för privatpersonerna än för kundgruppen.

Avaliação de cultivares de melancia na Depressão Central do Rio Grande do Sul

O objetivo do presente trabalho conduzido na Estação Experimental Agronômica da Universidade Federal do Rio Grande do Sul em Eldorado do Sul, RS, em um solo Podzólico Vermelho Amarelo, foi avaliar nove cultivares de melancia (Citrullus lanatus) buscando identificar cultivares de melhor adaptação à região, possibilitando o cultivo em anos sucessivos na mesma área, pois os produtores devido a problemas fitossanitários buscam a cada cultivo novas áreas para produzir. A semeadura no espaçamento 3,0m x 1,5m, foi feita em novembro, com ressemeadura em dezembro de 2000. As cultivares foram avaliadas quanto à produtividade e ocorrência de doenças. Em termos de produtividade, a cultivar Vista F1, com 10,8 t.ha-1, foi significativamente mais produtiva que a cultivar Vitória F1 (2,6 t.ha-1). Quanto a ocorrência de doenças, a cultivar Athens F1 apresentou o menor número de plantas com sintomas de antracnose (Colletotrichum orbiculare), com 5,4 plantas, diferindo estatisticamente das cultivares Vista F1, Crimson Select, Crimson Magic F1, com 9,2, 8,6, 8,5 plantas, respectivamente, e das cultivares Vitória F1, Arriba F1 e Verona F1, com 8,1 plantas com sintomas. O peso 6,4 Kg por fruto da cultivar Crimson Magic F1 foi significativamente maior que o peso de frutos das cultivares Vitória F1 (4,4 Kg) e Crimson Sweet (4,4 Kg). O peso de melancias das demais cultivares foi intermediário e não diferiu estatisticamente do peso médio da cultivar Crimson Magic F1. Na classificação dos frutos por peso, somente as cultivares Athens F1 e Vista F1 apresentaram frutos com peso acima de 10 Kg, frutos na categoria especial. As cultivares Verona F1, Crimson Magic F1 e Vista F1 apresentaram a melhor performance em relação ao número de frutos na categoria 1, isto é, frutos com peso entre 6 e 10 Kg . As cultivares Vista F1 e Crimson Magic F1 destacaram-se na produtividade e a cultivar Athens F1 destacou-se na resistência a antracnose. Estas cultivares são promissoras, mas são necessários novos ensaios para consolidar estes resultados.

Aspectos da biologia e ecologia da Tartaruga Tigre D'Agua, Trachemys dorbigni, (Testudines - Emydidae) no extremo sul do Estado do Rio Grande do Sul - Brasil

Populações de Trachemys dorbigni foram estudadas em duas áreas geográficas distintas. Estas áreas localizam-se na Estação Ecológica do Taim (Base Santa Marta) (UTM x=346185 y=6365666 22H) e na Lagoa Verde, no município de Rio Grande (UTM x=385820 y=644500 22H), ambas no sul do Estado do Rio Grande do Sul, Brasil. A população da Lagoa Verde serviu de subsídio para a caracterização da estrutura populacional da espécie, enquanto que a da Estação Ecológica do Taim foi analisada quanto aos aspectos da biologia e ecologia reprodutiva. A caracterização da estrutura foi analisada utilizando-se 210 exemplares adultos (104 fêmeas e 106 machos). As fêmeas atingem comprimentos da carapaça maiores que os machos ( x CMC= 212,1mm ± 14,823; x CMC= 181,6mm ± 17,076), sendo significativamente diferente (F1,207=191,140; P<0,001). O surgimento dos dimorfismos sexuais secundários dos machos ocorre a partir de 130mm de comprimento da carapaça, e se caracterizam pelo maior tamanho da cauda e pela melanização. Os machos de T. dorbigni não apresentam dimorfismo quanto à concavidade do plastrão. A maturidade das fêmeas foi estimada entre 150 e 160mm. A espécie desova entre os meses de outubro e janeiro, depositando, em média, 12,1 ovos. Os ovos de T. dorbigni são brancos, pergaminosos e elípticos O comprimento médio dos ovos é 39,3mm ± 2,06, a largura é 25,8mm ± 1,07 e o peso é 14,9g ± 1,47. As fêmeas podem realizar até três posturas por temporada reprodutiva, havendo um intervalo de 15 a 20 dias entre cada evento. Apenas 31% da população de fêmeas desova anualmente. As fêmeas depositam seus ninhos a distâncias que podem variar de 0 a 560,3m ( x =69,2m; N=101) da água. As estimativas do deslocamento de fêmeas em terra foi de 132m/dia (Mín.=15m; Máx.=285m; N=8). Já o maior deslocamento na água foi 950m em um dia. A média geral da distância entre duas capturas consecutivas para fêmeas não transferidas foi de 545,0m, enquanto que para as transferidas foi 520,5m. Constatou-se uma acentuada capacidade de orientação nas fêmeas transferidas ( =59,089; P<0,01), sendo que 86% destas foram capazes de retornarem na direção do seu ponto de captura após sua transferência.

A metodologia de análise de dados espaciais aplicada a plantas forrageiras

Dois experimentos e um levantamento por amostragem foram analisados no contexto de dados espaciais. Os experimentos foram delineados em blocos completos casualizados sendo que no experimento um (EXP 1) foram avaliados oito cultivares de trevo branco, sendo estudadas as variáveis Matéria Seca Total (MST) e Matéria Seca de Gramíneas (MSGRAM) e no experimento dois (EXP 2) 20 cultivares de espécies forrageiras, onde foi estudada a variável Percentagem de Implantação (%IMPL). As variáveis foram analisadas no contexto de modelos mistos, sendo modelada a variabilidade espacial através de semivariogramas exponencias, esféricos e gaussianos. Verificou-se uma diminuição em média de 19% e 14% do Coeficiente de Variação (CV) das medias dos cultivares, e uma diminuição em média de 24,6% e 33,3% nos erros padrões dos contrastes ortogonais propostos em MST e MSGRAM. No levantamento por amostragem, estudou-se a associação espacial em Aristida laevis (Nees) Kunth , Paspalum notatum Fl e Demodium incanum DC, amostrados em uma transecção fixa de quadros contiguos, a quatro tamanhos de unidades amostrais (0,1x0,1m; 0,1x0,3m; 0,1x0,5m; e 0,1x1,0m). Nas espécies Aristida laevis (Nees) Kunth e Paspalum notatum Fl, existiu um bom ajuste dos semivariogramas a tamanhos menores das unidades amostrais, diminuíndo quando a unidade amostral foi maior. Desmodium incanum DC apresentou comportamento contrario, ajustando melhor os semivariogramas a tamanhos maiores das unidades amostrais.

Efeito das prostaglandinas ciclopentenônicas sobre a expressão gênica do fator nuclear PPAR-γ, do receptor de scavenger CD36 e proteínas de apoptose em macrófagos : implicações para a fisiopatologia da aterosclerose

Considerando que as doenças cardiovasculares representam a maior causa de mortalidade e morbidade em países ocidentais, a aterosclerose se destaca pelo fato de predispor os pacientes ao infarto do miocárdio, a acidentes vasculares cerebrais e a doenças vasculares periféricas. Neste contexto, a oxidação de lipoproteínas do plasma, particularmente LDL, é um dos fatores de risco para eventos cardiovasculares, pois é reconhecida e internalizada por macrófagos, ocasionando a sua diferenciação em foam cells. Diversos fatores participam deste processo de diferenciação, como a expressão de receptores de scavenger CD 36, proporcionando aumento na captação de LDL oxidada, aumento na síntese endógena de colesterol e ativação de fatores nucleares que iniciam a transcrição de proteínas específicas e fatores de crescimento que disparam a aterogênese. Os fenômenos celulares relacionados à apoptose também são de especial importância, tanto no desenvolvimento da lesão aterosclerótica como na estabilidade da placa e formação de trombos. As prostaglandinas (PGs) ciclopentenônicas (CP-PGs), em particular a PGA2 e a 15-desóxi-∆12,14-PGJ2 são uma classe especial de PGs que, em diminutas concentrações, disparam a expressão das proteínas de choque térmico (hsp), que são citoprotetoras. Além disso, CP-PGs bloqueiam a ativação do fator nuclear pró-inflamatório NF-κB tornando-as potentes agentes antiinflamatórios. Embora as PGs das famílias A e J guardem uma série de características em comum, a 15-desóxi-∆12,14- PGJ2 é o ligante fisiológico do fator nuclear pró-aterogênico PPAR-γ, enquanto as PGs da família A ativam apenas a via citoprotetora das hsp. Este trabalho teve como objetivo avaliar os efeitos das CP-PGs sobre a expressão gênica de fatores relacionados à diferenciação de macrófagos em foam cells, bem como proteínas reguladoras do processo de apoptose, em células da linhagem pró-monocítica humana U937. Para tal, as células foram tratadas com CPPGs em presença e/ou ausência de LDL nat e LDL ox, o RNA foi extraído para a realização de RT-PCR para PPAR-γ, CD 36, HMG-CoA redutase e proteínas de apoptose Caspase 3, p53 e Bcl-xL. O tratamento estatístico utilizado foi análise de variância (ANOVA one-way) e teste “t” de student, com resultados expressos como médias + desvios-padrão da média, com P<0,05. Os resultados obtidos demontraram que as CP-PGs PGA2 (20µM-24h) e PGJ2 (1,5µM-24h) inibiram a expressão gênica do fator nuclear PPAR- γ (64 % (PGA2), 88 % (15- d-PGJ2)) nas células U937, em presença de LDL oxidada, quando comparado ao controle. PGA2 inibiu a expressão de HMG-CoA redutase (33 %), enzima chave da síntese de colesterol intracelular, e o tratamento com as CP-PGs também inibiu a apoptose nas células tratadas em presença de LDL oxidada. Os dados sugerem que as CP-PGs apresentam grande potencial para o tratamento da aterosclerose, já que, além de apresentarem efeito antiinflamatório, inibem a expressão do fator nuclear pró-aterogênico PPAR-γ, do receptor de scavenger CD36 (apenas a 15-desóxi-∆12,14-PGJ2) e da enzima HMG-CoA redutase. O bloqueio da apoptose nas células estudadas pode estar relacionado à citoproteção oferecida por estas PGs. Embora investigações in vivo deste laboratório tenham mostrado a eficácia do tratamento com CP-PGs em camundongos portadores de aterosclerose, estudos adicionais são necessários para esclarecer-se o efeito antiaterogênico das mesmas.