Genetic diversity and differentiation in natural Plasmodium falciparum populations inferred by molecular typing of the merozoite surface proteins 1 and 2

Genetic diversity and differentiation, inferred by typing the polymorphic genes coding for the merozoite surface proteins 1 (Msp-1) and 2 (Msp-2), were compared for 345 isolates belonging to seven Plasmodium falciparum populations from three continents. Both loci yielded similar estimates of genetic diversity for each population, but rather different patterns of between-population differentiation, suggesting that natural selection on these loci, rather than the transmission dynamics of P. falciparum, determines the variation in allele frequencies among populations.

Estruturas 3D porosas com gradiente de funcionalidade produzidas por Freeze-casting

Dissertação para obtenção do Grau de Mestre em Engenharia de Materiais

The Role of the Endoplasmic Reticulum Stress Transducer Ire1 during Photoreceptor Differentiation in Drosophila

Dissertation presented to obtain the Ph.D degree in Biology.

Role of Notch signaling on the differentiation of early lymphoid progenitors cells: a view throughout the development of the embryonic chicken thymus and spleen

Dissertação para a obtenção do grau de Mestre em Genética Molecular e Biomedicina

Differentiation of Candida species obtained from nosocomial candidemia using RAPD-PCR technique

Thirteen strains of the genus Candida were isolated from catheter, urine and surgical wounds from individual patients of the Santa Casa de Misericórdia, Belo Horizonte, MG, Brazil. Ten strains were characterized as Candida albicans, two as Candida glabrata, and one as Candida parapsilosis. Isolates were evaluated for molecular relatedness by random amplified polymorphic DNA technique using 15 primers. The analysis of the genomic DNA obtained revealed a low intraspecific polymorphism and did not allow for the differentiation between strains of the same species obtained from distinct clinical sources (catheter, urine and surgical wounds). The RAPD profiles generated were able to differentiate among the species of Candida albicans, Candida parapsilosis and Candida glabrata strains isolated in this study.

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

Spore differentiation in relation to the infectious cycle of the enteric pathogen Clostridium difficile

Clostridium difficile is a gram positive, spore former, anaerobic bacterium that is able to cause infection and disease, with symptoms ranging from mild diarrhea to pseudomembranous colitis, toxic megacolon, sepsis and death. In the last decade new strains have emerged that caused outbreaks of increased disease severity and higher recurrence, morbidity and mortality rates, and C. difficile is now considered both a main nosocomial pathogen associated with antibiotic therapy as well as a major concern in the community.(...)

Identification and differentiation of Candida species from pediatric patients by random amplified polymorphic DNA

Thirty-four Candida isolates were analyzed by random amplified polymorphic DNA using the primer OPG-10:24 Candida albicans; 4 Candida tropicalis; 2 Candida parapsilosis; 2 Candida dubliniensis; 1 Candida glabrata and 1 Candida krusei. The UPGMA-Pearson correlation coefficient was used to calculate the genetic distance between the different Candida groupings. Samples were classified as identical (correlation of 100%); highly related samples (90%); moderately related samples (80%) and unrelated samples (< 70%). The results showed that the RAPD proposed was capable of classifying the isolates coherently (such that same species were in the same dendrogram), except for two isolates of Candida parapsilosis and the positive control (Netherlands, 1973), probably because they are now recognized as three different species. Concerning the only fluconazole-resistant Candida tropicalis isolate with a genotype that was different to the others, the data were insufficient to affirm that the only difference was the sensitivity to fluconazole. We concluded that the Random Amplified Polymorphic DNA proposed might be used to confirm Candida species identified by microbiological methods.

Writing/erasing 3D micro and nano wrinkles in flexible elastomers for volatile organic compounds sensor

Micro/nano wrinkled patterns on cross-linked urethane/urea polymeric flexible free standing films with two soft segments, polypropylene oxide and polybutadiene, can be induced by UV-irradiation. The ability to write/erase these 3D structures, in a controlled manner, is the main focus of this work. The imprinting of the wrinkled structures was accomplished by swelling in an appropriate solvent followed by drying the membranes after the cross-linking process and UV irradiation. The surface tailoring of the elastomeric membranes was imaged by optical microscopy, scanning electronic microscopy and by atomic force microscopy. To erase the wrinkled structures the elastomers were swollen. The swelling as well as the sol/gel fraction and the UV radiation were tuned in order to control the wrinkles characteristics. It was found that the wrinkles wavelength, in the order of microns (1±0,25μm), was stamped by the UV radiation intensity and exposure time while the wrinkles' amplitude, in the order of nanometers (150-450 nm), was highly dependent on the swelling and sol/gel fraction. A prototype for volatile organic compounds detection was developed taking advantage of the unique 3D micro/nano wrinkles features.

Differentiation between Candida albicans and Candida dubliniensis using hypertonic Sabouraud broth and tobacco agar

INTRODUCTION: Opportunistic fungal infections in immunocompromised hosts are caused by Candida species, and the majority of such infections are due to Candida albicans. However, the emerging pathogen Candida dubliniensis demonstrates several phenotypic characteristics in common with C. albicans, such as production of germ tubes and chlamydospores, calling attention to the development of stable resistance to fluconazole in vitro. The aim of this study was to evaluate the performance of biochemistry identification in the differentiating between C. albicans and C. dubliniensis, by phenotyping of yeast identified as C. albicans. METHODS: Seventy-nine isolates identified as C. albicans by the API system ID 32C were grown on Sabouraud dextrose agar at 30°C for 24-48h and then inoculated on hypertonic Sabouraud broth and tobacco agar. RESULTS: Our results showed that 17 (21.5%) isolates were growth-inhibited on hypertonic Sabouraud broth, a phenotypic trait inconsistent with C. albicans in this medium. However, the results observed on tobacco agar showed that only 9 (11.4%) of the growth-inhibited isolates produced characteristic colonies of C. dubliniensis (rough colonies, yellowish-brown with abundant fragments of hyphae and chlamydospores). CONCLUSIONS: The results suggest that this method is a simple tool for screening C. albicans and non-albicans yeast and for verification of automated identification.

Produção de matrizes porosas 3D baseadas em réplicas invertidas de cristais coloidais

A Engenharia de Tecidos surge da necessidade recorrente de regenerar ou recriar órgãos e tecidos danificados devido a vários tipos de trauma. A carência de funcionalidades resultante pode ser resolvida através da implantação de substitutos bio-sintéticos. O presente trabalho consiste na produção de matrizes porosas 3D baseadas em réplicas invertidas de cristais coloidais com futura aplicação em substituintes ósseos sintéticos para fraturas de não-união. O substituinte ósseo consiste numa estrutura denominada Inverse colloidal crystal (ICC), em que a sua organização singular resulta numa homogénea proliferação celular e num aumento das propriedades mecânicas, quando comparada com outros substituintes. O primeiro passo para a obtenção desta estrutura é a produção de microesferas de poliestireno, por uma técnica baseada em microfluídica. Posteriormente as microesferas são empacotadas resultando numa estrutura coesa com ligações entre microesferas vizinhas. O preenchimento dos espaços vazios entre microesferas pelo biomaterial pretendido e posterior remoção das microesferas dá origem à estrutura porosa do ICC. ICCs poliméricos (ϕCs = 1,00) e compósitos (ϕCs = 0,86 e ϕHA = 0,14; ϕCs = 0,67 e ϕHA = 0,33; ϕCs = ϕHA = 0,50) são produzidos e as suas propriedades mecânicas são testadas através de ensaios de compressão e comparadas com outros substituintes sintéticos. Para avaliação do comportamento dos materiais em contacto com meio biológico, foram realizados testes de citotoxicidade que revelaram uma viabilidade celular acima dos 80% em todos os ICCs.

Rapid detection and differentiation of mycobacterial species using a multiplex PCR system

Introduction The early diagnosis of mycobacterial infections is a critical step for initiating treatment and curing the patient. Molecular analytical methods have led to considerable improvements in the speed and accuracy of mycobacteria detection. Methods The purpose of this study was to evaluate a multiplex polymerase chain reaction system using mycobacterial strains as an auxiliary tool in the differential diagnosis of tuberculosis and diseases caused by nontuberculous mycobacteria (NTM) Results Forty mycobacterial strains isolated from pulmonary and extrapulmonary origin specimens from 37 patients diagnosed with tuberculosis were processed. Using phenotypic and biochemical characteristics of the 40 mycobacteria isolated in LJ medium, 57.5% (n=23) were characterized as the Mycobacterium tuberculosis complex (MTBC) and 20% (n=8) as nontuberculous mycobacteria (NTM), with 22.5% (n=9) of the results being inconclusive. When the results of the phenotypic and biochemical tests in 30 strains of mycobacteria were compared with the results of the multiplex PCR, there was 100% concordance in the identification of the MTBC and NTM species, respectively. A total of 32.5% (n=13) of the samples in multiplex PCR exhibited a molecular pattern consistent with NTM, thus disagreeing with the final diagnosis from the attending physician. Conclusions Multiplex PCR can be used as a differential method for determining TB infections caused by NTM a valuable tool in reducing the time necessary to make clinical diagnoses and begin treatment. It is also useful for identifying species that were previously not identifiable using conventional biochemical and phenotypic techniques.

Produção e caracterização de espumas 3D obtidas por electrofiação para aplicação em engenharia de tecidos

A produção de estruturas tridimensionais poliméricas tem sido foco de estudo por parte da Engenharia de Células e Tecidos, pelo que mimetizam melhor as condições in vivo dos tecidos. A conjugação das propriedades eléctricas com arquitectura 3D permite uma regeneração tecidual mais eficaz. Desta forma este estudo incidiu na construção de scaffolds, que conjugasse as propriedades mecânicas, eléctricas e biológicas num só suporte. O processo utilizado para produção de scaffolds baseou-se na electrofiação de soluções poliméricas de PCL (8% m/m) com incorporação de óxido de grafeno em diferentes concentrações: 0.01%, 0.1% e 0.25% (m/V). Foram avaliados os parâmetros de electrofiação que permitiram a organização tridimensional. A composição química e a morfologia das membranas foram avaliadas por FTIR-ATR e por microscopia electrónica de varrimento (MEV), respectivamente. Através de ensaios de tracção e de permeabilidade estudou-se a influência de óido de grafeno na matriz polimérica. Foram feitas experiências de redução de óxido de grafeno nas fibras electrofiadas, tanto nas membranas como das espumas, através do uso de vapores de hidrazina. Este mecanismo mostrou-se ineficaz, uma vez que afectou a sua morfologia. As espumas foram avaliadas quanto à sua bioactividade e propriedades mecânicas (ensaios de compressão). Também foram realizados testes de viabilidade celular nas membranas e de adesão celular nas espumas, de forma a avaliar o seu potencial para aplicação biomédica. Os resultados destes ensaios revelaram que óxido de grafeno não apresenta efeitos citotóxicos para o organismo e a sua presença promove a adesão celular ao scaffold.

Jogo 3D online para reabilitação de pacientes afásicos

Esta plataforma foi projetada como auxílio complementar ao processo de reabilitação de doentes afásicos lusófonos. Uma gama de exercícios são disponibilizados de forma a induzir diferentes estímulos (compreensão escrita e auditiva e expressão escrita) sendo a grande maioria destes realizados dentro de um ambiente virtual em três dimensões onde o utilizador (dependendo da tarefa) pode interagir com objetos presentes dentro de uma casa. A principal particularidade desta plataforma reside no facto desta estar alojada online, dispensando instalações e permitindo um acompanhamento mais próximo por parte do terapeuta da fala do progresso feito pelo paciente. A ferramenta desenvolvida está disponível para visualização e teste no endereço www.weblisling.net.

Prostate carcinoma with neuroendocrine differentiation: case report and literature review

Neuroendocrine differentiation in prostatic carcinomas generally confers a more aggressive clinical behavior and less favorable prognosis than usual prostatic carcinomas. In this manuscript, we report a case of a 58-year-old man with prostatic carcinoma who died 1 year after initial diagnosis. Autopsy showed a disseminated prostatic carcinoma with neuroendocrine differentiation. There were metastasis to the spleen, an organ infrequently involved by disseminated epithelial neoplasms. Neuroendocrine differentiation was demonstrated by immunohistochemical studies in the biopsy and autopsy material.