The use of public transport in coastal Australia : modes of travel to work and greenhouse emissions

Commuting to work is one of the most important and regular routines of transportation in towns and cities. From a geographic perspective, the length of people’s commute is influenced, to some degree, by the spatial separation of their home and workplace and the transport infrastructure. The rise of car ownership in Australia from the 1950s to the present was accompanied by a considerable decrease of public transport use. Currently there is an average of 1.4 persons per car in Australia, and private cars are involved in approximately 90% of the trips, and public transportation in only 10%. Increased personal mobility has fuelled the trend of decentralised housing development, mostly without a clear planning for local employment, or alternative means of transportation. Transport sector accounts for 14% of Australia’s net greenhouse gas emissions. Without further policy action, Australia’s emissions are projected to continue to increase. The Australian Federal Government and the new Department of Climate Change have recently published a set of maps showing that rising seas would submerge large parts of Victoria coastal region. Such event would lead to major disruption in planned urban growth areas in the next 50 years with broad scale inundation of dwellings, facilities and road networks. The Greater Geelong Region has well established infrastructure as a major urban centre and tourist destination and hence attracted the attention of federal and state governments in their quest for further development and population growth. As a result of its natural beauty and ecological sensitivity, scenarios for growth in the region are currently under scrutiny from local government as well as development agencies, scientists, and planners. This paper is part of a broad research in the relationship between transportation system, urban form, trip demand, and emissions, as a paramount in addressing the challenges presented by urban growth. Progressing from previous work focused on private cars, this present paper investigates the use of public transport as a mode for commuting in the Greater Geelong Region. Using a GIS based interaction model, it characterises the current use of the existing public transportation system, and also builds a scenario of increased use of the existing public transportation system, estimating potencial reductions in CO2 emissions. This study provides an improved understanding of the extent to which choices of transport mode and travel activity patterns, affect emissions in the context of regional networks. The results indicate that emissions from commuting by public transportation are significantly lower than those from commuting by private car, and emphasise that there are opportunities for large abatment in the greenhouse emissions from the transportation sector related to efforts in increasing the use of existing public transportation system.

Stochastic models of road geometry and wind condition for vehicle energy management and control

Modeling and simulation is commonly used to improve vehicle performance, to optimize vehicle system design, and to reduce vehicle development time. Vehicle performances can be affected by environmental conditions and driver behavior factors, which are often uncertain and immeasurable. To incorporate the role of environmental conditions in the modeling and simulation of vehicle systems, both real and artificial data are used. Often, real data are unavailable or inadequate for extensive investigations. Hence, it is important to be able to construct artificial environmental data whose characteristics resemble those of the real data for modeling and simulation purposes. However, to produce credible vehicle simulation results, the simulated environment must be realistic and validated using accepted practices. This paper proposes a stochastic model that is capable of creating artificial environmental factors such as road geometry and wind conditions. In addition, road geometric design principles are employed to modify the created road data, making it consistent with the real-road geometry. Two sets of real-road geometry and wind condition data are employed to propose probability models. To justify the distribution goodness of fit, Pearson's chi-square and correlation statistics have been used. Finally, the stochastic models of road geometry and wind conditions (SMRWs) are developed to produce realistic road and wind data. SMRW can be used to predict vehicle performance, energy management, and control strategies over multiple driving cycles and to assist in developing fuel-efficient vehicles.

Do the numbers and locations of road-killed anuran carcasses accurately reflect impacts of vehicular traffic?

Road-killed animals are easy and inexpensive to survey, and may provide information about species distributions, abundances, and mortality rates. As with any sampling method, however, we need to explore methodological biases in such data. First, how does an animal's behavior (e.g., use of the center vs. periphery of the road) influence its vulnerability to vehicular traffic? Second, how rapidly do post-mortem processes (scavenging by other animals, destruction or displacement by subsequent vehicles) change the numbers and locations of roadkills? Our surveys of anurans on a highway in tropical Australia show that different anuran species are distributed in different ways across the width of the road, and that locations of live versus dead animals sometimes differ within a species. Experimental trials show that location on the road affects the probability of being hit by a vehicle, with anurans in the middle of the road begin hit 35% more often than anurans on the edges; thus, center-using species are more likely to be hit than edge-using taxa. The magnitude of post-mortem displacement and destruction by subsequent vehicles depended on anuran species and body size. The mean parallel displacement distance was 122.7 cm, and carcasses of thin-skinned species exhibited greater post-mortem destruction. Scavenging raptors removed 73% of carcasses, most within a few hours of sunrise. Removal rates were biased with respect to size and species. Overall, our studies suggest that investigators should carefully evaluate potential biases before using roadkill counts to estimate underlying animal abundances or mortality rates.

Visual timing and adaptive behavior in a road-crossing simulation study

In this road-crossing simulation study, we assessed both participant's ability to visually judge whether or not they could cross a road, and their adaptive walking behavior. To this end, participants were presented with a road inside the laboratory on which a bike approached with different velocities from different distances. Eight children aged 5-7, ten children aged 10-12, and ten adults were asked both to verbally judge whether they could cross the road, and to actually walk across the road if possible. The results indicated that the verbal judgments were not similar to judgments to actually cross the road. With respect to safety and accuracy of judgments, groups did not differ from each other, although the youngest group tended to be more cautious. All groups appeared to use a strategy to cross the road based both on the distance and the velocity of the approaching bike. Young children waited longer on the curb before crossing the road than older children and adults. All groups adjusted their crossing time to the time-to-arrival of the bike. These findings are discussed in relation to the ecological psychological approach and the putative dissociation between vision for perception (i.e. verbal judgment) and vision for action (i.e. actual crossing). (c) 2004 Elsevier Ltd. All rights reserved.

International finance and Caribbean development

Includes bibliography

Análise energética na logística de transporte multimodal para exportação do etanol de Aparecida do Taboado (MS) até o porto de São Sebastião (SP)

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Road-kills of the giant anteater in south-eastern Brazil: 10 years monitoring spatial and temporal determinants

Context. The giant anteater, Myrmecophaga tridactyla, is a large insectivorous mammal from Cerrado which is classified as vulnerable by the IUCN's red list. In spite of frequent giant anteater casualties, there continues to be a lack of published data on how road and landscape attributes affect road-kill rates - information that could prove useful in guiding mitigation measures.Aims. We seek to determine whether road and landscape attributes influence the incidence of road-kills of the giant anteater.Methods. From February 2002 to December 2012 (except for 2004), five roads in two regions in south-eastern Brazil were surveyed twice each month by car. We recorded temporal road-kill data for the giant anteater and related spatial road variables. These variables were also recorded at regular control sites every 2 km. We also took traffic volume data on stretches of the two roads to correlate with road-kills.Key results. Of the 45 anteater casualties recorded, there was a predominance of adult males. On roads MG-428 and SP-334, we found anteater road-kills were more common in the dry season, negatively correlated with traffic volume and related to the presence of native vegetation. Accordingly, road-kill sites tended to occur near the cerrado and grasslands and also appeared more frequently on some straight stretches of roadways. Although it was not shown to influence road-kill rates, topography data does point to regular overpass/underpass locations allowing population connectivity. Termitaria or ant nests were present at all road-kill sites, with 86% having signs of feeding.Conclusions. Native vegetation along roadways, together with straight road design, increases the probability of anteater road-kills by 40.1%.Implications. For mitigation, mowing and removing insect nests on roadsides, as well as roadside wildlife fencing in cerrado and grassland areas is suggested. Warning signs and radar to reduce vehicle speed are recommended for both human safety and anteater conservation. With regard to population connectivity, the absence of aggregated anteater road-kill data in this study meant that there were no particular crossing locations identified. However, the collected topography data do show places that could be used for roadway crossings. The measures indicated may apply to similar species and types of topography on other continents.

A model of road effect using line integrals and a test of the performance of two new road indices using the distribution of small mammals in an Atlantic Forest landscape

Effects of roads on wildlife and its habitat have been measured using metrics, such as the nearest road distance, road density, and effective mesh size. In this work we introduce two new indices: (1) Integral Road Effect (IRE), which measured the sum effects of points in a road at a fixed point in the forest; and (2) Average Value of the Infinitesimal Road Effect (AVIRE), which measured the average of the effects of roads at this point. IRE is formally defined as the line integral of a special function (the infinitesimal road effect) along the curves that model the roads, whereas AVIRE is the quotient of IRE by the length of the roads. Combining tools of ArcGIS software with a numerical algorithm, we calculated these and other road and habitat cover indices in a sample of points in a human-modified landscape in the Brazilian Atlantic Forest, where data on the abundance of two groups of small mammals (forest specialists and habitat generalists) were collected in the field. We then compared through the Akaike Information Criterion (AIC) a set of candidate regression models to explain the variation in small mammal abundance, including models with our two new road indices (AVIRE and IRE) or models with other road effect indices (nearest road distance, mesh size, and road density), and reference models (containing only habitat indices, or only the intercept without the effect of any variable). Compared to other road effect indices, AVIRE showed the best performance to explain abundance of forest specialist species, whereas the nearest road distance obtained the best performance to generalist species. AVIRE and habitat together were included in the best model for both small mammal groups, that is, higher abundance of specialist and generalist small mammals occurred where there is lower average road effect (less AVIRE) and more habitat. Moreover, AVIRE was not significantly correlated with habitat cover of specialists and generalists differing from the other road effect indices, except mesh size, which allows for separating the effect of roads from the effect of habitat on small mammal communities. We suggest that the proposed indices and GIS procedures could also be useful to describe other spatial ecological phenomena, such as edge effect in habitat fragments. (C) 2012 Elsevier B.V. All rights reserved.

Context-sensitive design in transportation infrastructure: relating tire/pavement noise with wearing course characteristics

A design can be defined as context-sensitive when it achieves effective technical and functional transportation solutions, while preserving and enhancing natural environments and minimizing impacts on local communities. Traffic noise is one of the most critical environmental impacts of transportation infrastructure and it affects both humans and ecosystems. Tire/pavement noise is caused by a set of interactions at the contact patch and it is the predominant source of road noise at the regular traffic speeds. Wearing course characteristics affect tire/pavement noise through various mechanisms. Furthermore, acoustic performance of road pavements varies over time and it is influenced by both aging and temperature. Three experimentations have been carried out to evaluate wearing course characteristics effects on tire/pavement noise. The first study involves the evaluation of skid resistance, surface texture and tire/pavement noise of an innovative application of multipurpose cold-laid microsurfacing. The second one involves the evaluation of the surface and acoustic characteristics of the different pavement sections of the test track of the Centre for Pavement and Transportation Technology (CPATT) at the University of Waterloo. In the third study, a set of highway sections have been selected in Southern Ontario with various types of pavements. Noise measurements were carried out by means of the Statistical Pass-by (SPB) method in the first case study, whereas in the second and in the third one, Close-proximity (CPX) and the On-Board Sound Intensity (OBSI) methods have been performed in parallel. Test results have contributed to understand the effects of pavement materials, temperature and aging on tire/pavement noise. Negligible correlation was found between surface texture and roughness with noise. As a general trend, aged and stiffer materials have shown to provide higher noise levels than newer and less stiff ones. Noise levels were also observed to be higher with temperature increase.

Frost heave testing of norwegian materials for road infrastructure

In areas of seasonal frost, frost susceptibility composed by frost heaving during the winter and thaw softening during the spring is one of the most dangerous phenomenon for transportation, road and railway infrastructure. Therefore, the need for frost protection layer becomes imperative. The purpose of frost protection layer is to prevent frost from penetrating down through the pavement and into the sub-soils. Frost susceptible soils under the road can be cause damages on the roads or other structures due to frost heave or reduced capacity characteristics thaw period. "Frost heave" is the term given to the upwards displacement of the ground surface caused by the formation of ice within soils or aggregates (Rempel et al., 2004). Nowadays in Scandinavia the most common material used in frost protection layer in the pavement structure of roads and in the ballast of the railway tracks are coarse-grain crushed rocks aggregates. Based on the capillary rise, the mechanics of frost heave phenomenon is based on the interaction between aggregates and water, as suggested by Konrad and Lemieux in 2005 that said that the fraction of material below the 0.063 mm sieve for coarse-grained soils must be controlled so as to reduce the sensitivity to frost heave. The study conducted in this thesis project is divided in two parts: - the analysis of the coarse grained aggregates used in frost protection layer in Norway; - the analysis of the frost heave phenomenon in the laboratory under known boundary conditions, through the use of the most widely used method, the frost heave test, in” closed system” (without access of water).

DEVELOPMENT OF AN OPTIMIZATION MODEL FOR BIOFUEL FACILITY SIZE AND LOCATION AND A SIMULATION MODEL FOR DESIGN OF A BIOFUEL SUPPLY CHAIN

A range of societal issues have been caused by fossil fuel consumption in the transportation sector in the United States (U.S.), including health related air pollution, climate change, the dependence on imported oil, and other oil related national security concerns. Biofuels production from various lignocellulosic biomass types such as wood, forest residues, and agriculture residues have the potential to replace a substantial portion of the total fossil fuel consumption. This research focuses on locating biofuel facilities and designing the biofuel supply chain to minimize the overall cost. For this purpose an integrated methodology was proposed by combining the GIS technology with simulation and optimization modeling methods. The GIS based methodology was used as a precursor for selecting biofuel facility locations by employing a series of decision factors. The resulted candidate sites for biofuel production served as inputs for simulation and optimization modeling. As a precursor to simulation or optimization modeling, the GIS-based methodology was used to preselect potential biofuel facility locations for biofuel production from forest biomass. Candidate locations were selected based on a set of evaluation criteria, including: county boundaries, a railroad transportation network, a state/federal road transportation network, water body (rivers, lakes, etc.) dispersion, city and village dispersion, a population census, biomass production, and no co-location with co-fired power plants. The simulation and optimization models were built around key supply activities including biomass harvesting/forwarding, transportation and storage. The built onsite storage served for spring breakup period where road restrictions were in place and truck transportation on certain roads was limited. Both models were evaluated using multiple performance indicators, including cost (consisting of the delivered feedstock cost, and inventory holding cost), energy consumption, and GHG emissions. The impact of energy consumption and GHG emissions were expressed in monetary terms to keep consistent with cost. Compared with the optimization model, the simulation model represents a more dynamic look at a 20-year operation by considering the impacts associated with building inventory at the biorefinery to address the limited availability of biomass feedstock during the spring breakup period. The number of trucks required per day was estimated and the inventory level all year around was tracked. Through the exchange of information across different procedures (harvesting, transportation, and biomass feedstock processing procedures), a smooth flow of biomass from harvesting areas to a biofuel facility was implemented. The optimization model was developed to address issues related to locating multiple biofuel facilities simultaneously. The size of the potential biofuel facility is set up with an upper bound of 50 MGY and a lower bound of 30 MGY. The optimization model is a static, Mathematical Programming Language (MPL)-based application which allows for sensitivity analysis by changing inputs to evaluate different scenarios. It was found that annual biofuel demand and biomass availability impacts the optimal results of biofuel facility locations and sizes.

The Darién Region, Connecting Road of the Americas, among the expressions of hydric wealth, land vocation and the extractive exploration on its violated forms

Colombia has oceanic waters, catchment areas, like lakes, cienagas and swamps, water flows, like rivers, gorges and streams, small rivers and groundwater. The oceanic waters are the Caribbean Sea-1600 km and the Pacific Ocean-1300 km that comprise the north and west continental territory, respectively. Actually the Region of Darién, geographically bounded by the Carribean Sea to the north is becoming to be focused by studies due to use conflicts and disputes about water and a forest reserve on its territories. Considering its location, strategic at northwestern Colombia, frontier region with Central America, several dynamics are imposed. One of them is the implantation of a road system entitled Connecting Road of the Americas. This fact means the construction of an infra-structure that will cross a special zone formed by swamps and jungle known as The Darién Gap. Evidences of such interests are revealed by projects like the constructions of Turbo's Port in the Atlantic Ocean, Department of Antioquia and Tribugá's Port in the Pacific Ocean, Department of Choco, the mountain road and the coastal conection Colombia-Venezuela attending to the main intentions of the central region of the department (Metropolitan Area of Aburrá Valley-AMVA). Human settlements form a productive system, based on small and medium familiar agriculture's production, corresponding to the western portion and piedmont of Abibe's mountain at its antioquian portion, alluvial plan that forms the rivers on this area, the littoral zone that delimits the Carribean Sea, the Darién and Baudó Mountains and the gulf that receives, among other waters, the ones from Atrato and León, as well as the exodus process constitutes a forced exit resulting from actions of several armed groups. It can be identified intense historical, cultural, political and environmental relations, specially the last one associated with strategic ecosystems that are fundamental for the hydric regulation of the region, as well as food safety of the local inhabitants. Results from two researches (UPB, 2007 y 2010) reveals this quick transformation in the spatial re-configuration, demographical and economical indicators and the exacerbated fight for resources, damaging the extractive vocation in the Region. Path to commerce of illegalities (drugs, guns) and to implementation of the agroindustrial project for biofuel production, cooperation program that involves Venezuela, Brazil and Colombia. Appropriation modes allow the existence of strategies since global interests revealing a development logic that privileges the conception of an artificialized nature. Since the smallest portion of rural areas, specific modes of resources exploration are linked to imposed interests of transnational corporations. Disparate consequences are going deeper evidenced by social, technical and nature transformations, envisioning risks for the habitability's condition

The Darién Region, Connecting Road of the Americas, among the expressions of hydric wealth, land vocation and the extractive exploration on its violated forms

Colombia has oceanic waters, catchment areas, like lakes, cienagas and swamps, water flows, like rivers, gorges and streams, small rivers and groundwater. The oceanic waters are the Caribbean Sea-1600 km and the Pacific Ocean-1300 km that comprise the north and west continental territory, respectively. Actually the Region of Darién, geographically bounded by the Carribean Sea to the north is becoming to be focused by studies due to use conflicts and disputes about water and a forest reserve on its territories. Considering its location, strategic at northwestern Colombia, frontier region with Central America, several dynamics are imposed. One of them is the implantation of a road system entitled Connecting Road of the Americas. This fact means the construction of an infra-structure that will cross a special zone formed by swamps and jungle known as The Darién Gap. Evidences of such interests are revealed by projects like the constructions of Turbo's Port in the Atlantic Ocean, Department of Antioquia and Tribugá's Port in the Pacific Ocean, Department of Choco, the mountain road and the coastal conection Colombia-Venezuela attending to the main intentions of the central region of the department (Metropolitan Area of Aburrá Valley-AMVA). Human settlements form a productive system, based on small and medium familiar agriculture's production, corresponding to the western portion and piedmont of Abibe's mountain at its antioquian portion, alluvial plan that forms the rivers on this area, the littoral zone that delimits the Carribean Sea, the Darién and Baudó Mountains and the gulf that receives, among other waters, the ones from Atrato and León, as well as the exodus process constitutes a forced exit resulting from actions of several armed groups. It can be identified intense historical, cultural, political and environmental relations, specially the last one associated with strategic ecosystems that are fundamental for the hydric regulation of the region, as well as food safety of the local inhabitants. Results from two researches (UPB, 2007 y 2010) reveals this quick transformation in the spatial re-configuration, demographical and economical indicators and the exacerbated fight for resources, damaging the extractive vocation in the Region. Path to commerce of illegalities (drugs, guns) and to implementation of the agroindustrial project for biofuel production, cooperation program that involves Venezuela, Brazil and Colombia. Appropriation modes allow the existence of strategies since global interests revealing a development logic that privileges the conception of an artificialized nature. Since the smallest portion of rural areas, specific modes of resources exploration are linked to imposed interests of transnational corporations. Disparate consequences are going deeper evidenced by social, technical and nature transformations, envisioning risks for the habitability's condition

The Darién Region, Connecting Road of the Americas, among the expressions of hydric wealth, land vocation and the extractive exploration on its violated forms

Colombia has oceanic waters, catchment areas, like lakes, cienagas and swamps, water flows, like rivers, gorges and streams, small rivers and groundwater. The oceanic waters are the Caribbean Sea-1600 km and the Pacific Ocean-1300 km that comprise the north and west continental territory, respectively. Actually the Region of Darién, geographically bounded by the Carribean Sea to the north is becoming to be focused by studies due to use conflicts and disputes about water and a forest reserve on its territories. Considering its location, strategic at northwestern Colombia, frontier region with Central America, several dynamics are imposed. One of them is the implantation of a road system entitled Connecting Road of the Americas. This fact means the construction of an infra-structure that will cross a special zone formed by swamps and jungle known as The Darién Gap. Evidences of such interests are revealed by projects like the constructions of Turbo's Port in the Atlantic Ocean, Department of Antioquia and Tribugá's Port in the Pacific Ocean, Department of Choco, the mountain road and the coastal conection Colombia-Venezuela attending to the main intentions of the central region of the department (Metropolitan Area of Aburrá Valley-AMVA). Human settlements form a productive system, based on small and medium familiar agriculture's production, corresponding to the western portion and piedmont of Abibe's mountain at its antioquian portion, alluvial plan that forms the rivers on this area, the littoral zone that delimits the Carribean Sea, the Darién and Baudó Mountains and the gulf that receives, among other waters, the ones from Atrato and León, as well as the exodus process constitutes a forced exit resulting from actions of several armed groups. It can be identified intense historical, cultural, political and environmental relations, specially the last one associated with strategic ecosystems that are fundamental for the hydric regulation of the region, as well as food safety of the local inhabitants. Results from two researches (UPB, 2007 y 2010) reveals this quick transformation in the spatial re-configuration, demographical and economical indicators and the exacerbated fight for resources, damaging the extractive vocation in the Region. Path to commerce of illegalities (drugs, guns) and to implementation of the agroindustrial project for biofuel production, cooperation program that involves Venezuela, Brazil and Colombia. Appropriation modes allow the existence of strategies since global interests revealing a development logic that privileges the conception of an artificialized nature. Since the smallest portion of rural areas, specific modes of resources exploration are linked to imposed interests of transnational corporations. Disparate consequences are going deeper evidenced by social, technical and nature transformations, envisioning risks for the habitability's condition

Infrastructure Development of Railway in Cambodia: A Long Term Strategy

Infrastructure development means for the making of living environment, transport and communications, disaster prevention and national land conservation, agriculture, forestry and fisheries, and energy production and supply. Transport infrastructure development in Cambodia involved with (1) road, (2) railway, (3) port, inland-water way and (4) aviation. All model of transport infrastructure have special different kinds of importance. Railway is different from other base important of railways are transport passengers and traffic freight especially transport for heavy goods in huge capacity and in long distance by safer and faster. Transport in Cambodia for traffic freight export import base from Thailand and other via Sisophon and Shihanoukvill port. Traffic is increasing rapidly during nowadays railway condition in adequate of demand required. This is why Railway is selected as the topic of this paper to prevent monopoly of road transport. This paper, does review about infrastructure development plan for Railway in Cambodia as a long term strategy by review and analysis forecast on the previous performance of Royal Railways of Cambodia (RRC) transport traffic involved with condition of infrastructure development of railway in Cambodia. And also review the plan of development RRC but just only detail a plan of rehabilitation that is immediately needed. Suggest some recommendation at the last part. As Cambodia is a member country of ASEAN and also Mekong sub-region. For make sure that transport networks work effectively with a progress of economic integration, we make clear what is important for infrastructure development of railway in Cambodia from the standpoint of the development plan of Mekong sub-region. This paper is organized by 4 sections. Section 1 review about Infrastructure Development of Railway in Cambodia (IDRC) Historical Background, Follow by Section 2 will review the Current Situation of IDRC and some analysis of transport performance from previous years, Then Section 3 review of the focusing on traffic transport of RRC in the future, Section 4 review Infrastructure Development of Railway in Cambodia Future plans in long term; at last conclusion and recommendation. In section 1 does review history background of RRC from the rail first begun. But why is needed to review? Because of history background is involved infrastructure development of RRC in present time. History background made big gaps constraint and obstacle for socioeconomic development and poverty reduction, also left Cambodia with tragedy and left developed behind. After that remain infrastructure development needs huge fund and long time for restoration, reconstruction, rehabilitation and development into new technology as most of world practice.