De iure adhaerendi alterius appellatione, & de omni adhaefionis materia : tractatus theoricae, et maxime praxi ... /

Mode of access: Internet.

4Rs newsletter : reduce, reuse, recycle, re-buy /

Title from caption.

Sancti Hilarii Pictaviensis Episcopi Opera /

Mode of access: Internet.

Steatosis and liver cell apoptosis in chronic hepatitis C: A mechanism for increased liver injury

Steatosis is increasingly recognized as a cofactor influencing the progression of fibrosis in chronic hepatitis Q however, the mechanisms by which it contributes to liver injury remain uncertain. We studied 125 patients with chronic hepatitis C to assess the effect of steatosis on liver cell apoptosis and the expression of Bcl-2, Bd-x(L), Bax, and tumor necrosis factor alpha (TNF-alpha) and the relationship between liver cell apoptosis and disease severity. A significant increase in liver cell apoptosis was seen in liver sections with increasing grade of steatosis (r = 0.42; P < .0001). Hepatic steatosis and previous heavy alcohol consumption were the only two variables independently associated with the apoptotic index. Increasing steatosis was associated with decreased Bcl-2 mRNA levels and an increase in the proapoptotic Bax/Bcl-2 ratio (r = -0.32, P = .007; and r = 0.27, P = .02, respectively). In the absence of steatosis, increased liver cell apoptosis was not associated with stellate cell activation or fibrosis (r = 0.26, P = .11; r = 0.06, P = .71, respectively). In contrast, in the presence of steatosis, increasing apoptosis was associated with activation of stellate cells and increased stage of fibrosis (r = 0.35, P = .047; r = 0.33, P = .03, respectively), supporting the premise that the steatotic liver is more vulnerable to liver injury. In patients with hepatitis C virus genotype 3, there was a significant correlation between TNF-α mRNA levels and active caspase-3 (r = 0.54, P = .007). In conclusion, these observations suggest a mechanism whereby steatosis contributes to the progression of liver injury in chronic hepatitis C. Further investigation will be required to determine the molecular pathways responsible for the proapoptotic effect of steatosis and whether this increase in apoptosis contributes directly to fibrogenesis.

Embracing ligands. Synthesis, characterisation and the correlation between 59Co NMR and ligand field parameters of Co(III) complexes with a new class of nitrogen-thioether multidentate ligand

The syntheses of the hexadentate ligands 2,2,10,10-tetra(methyleneamine)-4,8-dithiaundecane (PrN(4)S(2)amp), 2,2,11,11-tetra(methyleneamine)-4,9-dithiadodecane (BuN(4)S(2)amp), and 1,2-bis(4,4-methyleneamine)-2-thiapentyl)benzene (XyN(4)S(2)amp) are reported and the complexes [Co(RN(4)S(2)amp)](3+) (R = Pr, Bu, Xy) characterised by single crystal X-ray study. The low-temperature (11 K) absorption spectra have been measured in Nafion films. From the observed positions of both spin-allowed (1)A(1g) --> T-1(1g) and (1)A(1g) --> T-1(2g) and spin forbidden (1)A(1g) --> T-3(1g) and (1)A(1g) --> T-3(2g) bands, octahedral ligand-field parameters (10D(q), B and C) have been determined. DFT calculations suggest that significant interaction between the d-d and CT excitations occurs for the complexes. The calculations offer an explanation for the observed deviations from linearity of the relationship between Co-59 magnetogyric ratio and beta(DeltaE)(-1) (beta = the nephelauxetic ratio; DeltaE the energy of the (1)A(1g) --> T-1(1g) transition) for a series of amine and mixed amine/thioether donor complexes.

Search for associations containing young stars (SACY). VII. New stellar and substellar candidate members in the young associations

Context. The young associations offer us one of the best opportunities to study the properties of young stellar and substellar objects and to directly image planets thanks to their proximity (<200 pc) and age (≈5−150 Myr). However, many previous works have been limited to identifying the brighter, more active members (≈1 M_⊙) owing to photometric survey sensitivities limiting the detections of lower mass objects. Aims. We search the field of view of 542 previously identified members of the young associations to identify wide or extremely wide (1000−100 000 au in physical separation) companions. Methods. We combined 2MASS near-infrared photometry (J, H, K) with proper motion values (from UCAC4, PPMXL, NOMAD) to identify companions in the field of view of known members. We collated further photometry and spectroscopy from the literature and conducted our own high-resolution spectroscopic observations for a subsample of candidate members. This complementary information allowed us to assess the efficiency of our method. Results. We identified 84 targets (45: 0.2−1.3 M_⊙, 17: 0.08−0.2 M_⊙, 22: <0.08 M_⊙) in our analysis, ten of which have been identified from spectroscopic analysis in previous young association works. For 33 of these 84, we were able to further assess their membership using a variety of properties (X-ray emission, UV excess, Hα, lithium and K I equivalent widths, radial velocities, and CaH indices). We derive a success rate of 76–88% for this technique based on the consistency of these properties. Conclusions. Once confirmed, the targets identified in this work would significantly improve our knowledge of the lower mass end of the young associations. Additionally, these targets would make an ideal new sample for the identification and study of planets around nearby young stars. Given the predicted substellar mass of the majority of these new candidate members and their proximity, high-contrast imaging techniques would facilitate the search for new low-mass planets.

Influence of the sputtering flow regime on the structural properties and magnetic behavior of Fe-Ga thin films (Ga ∼ 30 at.%)

In this paper we analyze the structure of Fe-Ga layers with a Ga content of ∼30 at.% deposited by the sputtering technique under two different regimes. We also studied the correlation between the structure and magnetic behavior of the samples. Keeping the Ar pressure fixed, we modified the flow regime from ballistic to diffusive by increasing the distance between the target and the substrate. X-ray diffraction measurements have shown a lower structural quality when growing in the diffusive flow. We investigated the impact of the growth regime by means of x-ray absorption fine structure (XAFS) measurements and obtained signs of its influence on the local atomic order. Full multiple scattering and finite difference calculations based on XAFS measurements point to a more relevant presence of a disordered A2 phase and of orthorhombic Ga clusters on the Fe-Ga alloy deposited under a diffusive regime; however, in the ballistic sample, a higher presence of D0_3/B2 phases is evidenced. Structural characteristics, from local to long range, seem to determine the magnetic behavior of the layers. Whereas a clear in-plane magnetic anisotropy is observed in the film deposited under ballistic flow, the diffusive sample is magnetically isotropic. Therefore, our experimental results provide evidence of a correlation between flow regime and structural properties and its impact on the magnetic behavior of a rather unexplored compositional region of Fe-Ga compounds.

Palladium Sulfide – A Highly Selective Catalyst for the Gas Phase Hydrogenation of Alkynes to Alkenes

Acknowledgements The support of the Spanish Government (projects CTQ2014-52956-C3-2-R and CTQ2014-52956-C3-3-R) is recognized.

Electrical characterization of amorphous silicon MIS-based structures for HIT solar cell applications

A complete electrical characterization of hydrogenated amorphous silicon layers (a-Si:H) deposited on crystalline silicon (c-Si) substrates by electron cyclotron resonance chemical vapor deposition (ECR-CVD) was carried out. These structures are of interest for photovoltaic applications. Different growth temperatures between 30 and 200 °C were used. A rapid thermal annealing in forming gas atmosphere at 200 °C during 10 min was applied after the metallization process. The evolution of interfacial state density with the deposition temperature indicates a better interface passivation at higher growth temperatures. However, in these cases, an important contribution of slow states is detected as well. Thus, using intermediate growth temperatures (100–150 °C) might be the best choice.

Biomass, quality traits and methane production of extensive grassland: biodiversity effects and sensor approaches

Energy policies around the world are mandating for a progressive increase in renewable energy production. Extensive grassland areas with low productivity and land use limitations have become target areas for sustainable energy production to avoid competition with food production on the limited available arable land resources and minimize further conversion of grassland into intensively managed energy cropping systems or abandonment. However, the high spatio-temporal variability in botanical composition and biochemical parameters is detrimental to reliable assessment of biomass yield and quality regarding anaerobic digestion. In an approach to assess the performance for predicting biomass using a multi-sensor combination including NIRS, ultra-sonic distance measurements and LAI-2000, biweekly sensor measurements were taken on a pure stand of reed canary grass (Phalaris aruninacea), a legume grass mixture and a diversity mixture with thirty-six species in an experimental extensive two cut management system. Different combinations of the sensor response values were used in multiple regression analysis to improve biomass predictions compared to exclusive sensors. Wavelength bands for sensor specific NDVI-type vegetation indices were selected from the hyperspectral data and evaluated for the biomass prediction as exclusive indices and in combination with LAI and ultra-sonic distance measurements. Ultrasonic sward height was the best to predict biomass in single sensor approaches (R² 0.73 – 0.76). The addition of LAI-2000 improved the prediction performance by up to 30% while NIRS barely improved the prediction performance. In an approach to evaluate broad based prediction of biochemical parameters relevant for anaerobic digestion using hyperspectral NIRS, spectroscopic measurements were taken on biomass from the Jena-Experiment plots in 2008 and 2009. Measurements were conducted on different conditions of the biomass including standing sward, hay and silage and different spectroscopic devices to simulate different preparation and measurement conditions along the process chain for biogas production. Best prediction results were acquired for all constituents at laboratory measurement conditions with dried and ground samples on a bench-top NIRS system (RPD > 3) with a coefficient of determination R2 < 0.9. The same biomass was further used in batch fermentation to analyse the impact of species richness and functional group composition on methane yields using whole crop digestion and pressfluid derived by the Integrated generation of solid Fuel and Biogas from Biomass (IFBB) procedure. Although species richness and functional group composition were largely insignificant, the presence of grasses and legumes in the mixtures were most determining factors influencing methane yields in whole crop digestion. High lignocellulose content and a high C/N ratio in grasses may have reduced the digestibility in the first cut material, excess nitrogen may have inhibited methane production in second cut legumes, while batch experiments proved superior specific methane yields of IFBB press fluids and showed that detrimental effects of the parent material were reduced by the technical treatment

Förändringar i informationshanteringen med användandet av molntjänster : Förändringsanalys hos ett företag inom retailbranschen

Den här studien, som har bedrivits i samarbete med konsultföretaget Pipe, har studerat informationshanteringsprocessen hos småföretag inom retailbranschen. Företaget som ägnar sig åt butiksplanering med hjälp av CAD-program har idag ingen koppling mellan CAD-programmet och den molndatabas som lagrar information. Syftet med arbetet är att beskriva hur ett åtgärdsförslag skulle kunna se ut för att företaget ska kunna förbättra sin informationshantering genom användandet utav en molndatabas. Vi har även beskrivit problemområdet kring kopplingar mellanmolndatabaser och designprogram. För att besvara studiens syfte har vi genomfört en fallstudie, och svaret på forskningsfrågorna, 1. Hur ser informationshanteringsprocessen ut idag? 2. Hur kan informationshanteringsprocessen förbättras? 2. Vilka arbetssteg skulle kunna tas bort om företaget inför en koppling mellanmolndatabasen och designprogrammet? 3. Är en molnbaserad lösning ett möjligt alternativ för att använda för småföretag i retailbranschen? 4. Hur ser det ut i andra branscher som använder sig av CAD-program? Har vi hittat genom att genomföra intervjuer. Intervjuerna har hjälpt oss att genomföra en förändringsanalys där vi genom handlingsgrafer och mål- och problemlistor har kommit fram till ett antal åtgärdsförslag som företaget bör genomföra för att förbättra sin informationshanteringsprocess. Utifrån förändringsanalysen har vi kunnat dra slutsatsen att informationshanteringsprocessen skulle kunna förbättras och snabbas upp genom att införa en koppling mellan designprogrammet och en molndatabas. Detta skulle innebära att material automatiskt laddas upp från designprogrammet tillmolndatabasen, som även kunden har tillgång till. På så sätt samlas all information på ett och samma ställe. Genom litteraturstudier har vi också kommit fram till att en molnbaserad lösning vore möjligt för företaget, då det är en billig och smidig lösning för företag som inte har så stora resurser.

Surface structured platinum electrodes for the electrochemical reduction of carbon dioxide in imidazolium based ionic liquids

The direct CO2 electrochemical reduction on model platinum single crystal electrodes Pt(hkl) is studied in [C2mim+][NTf2−], a suitable room temperature ionic liquid (RTIL) medium due to its moderate viscosity, high CO2 solubility and conductivity. Single crystal electrodes represent the most convenient type of surface structured electrodes for studying the impact of RTIL ion adsorption on relevant electrocatalytic reactions, such as surface sensitive electrochemical CO2 reduction. We propose here based on cyclic voltammetry and in situ electrolysis measurements, for the first time, the formation of a stable adduct [C2mimH–CO2−] by a radical–radical coupling after the simultaneous reduction of CO2 and [C2mim+]. It means between the CO2 radical anion and the radical formed from the reduction of the cation [C2mim+] before forming the corresponding electrogenerated carbene. This is confirmed by the voltammetric study of a model imidazolium-2-carboxylate compound formed following the carbene pathway. The formation of that stable adduct [C2mimH–CO2−] blocks CO2 reduction after a single electron transfer and inhibits CO2 and imidazolium dimerization reactions. However, the electrochemical reduction of CO2 under those conditions provokes the electrochemical cathodic degradation of the imidazolium based RTIL. This important limitation in CO2 recycling by direct electrochemical reduction is overcome by adding a strong acid, [H+][NTf2−], into solution. Then, protons become preferentially adsorbed on the electrode surface by displacing the imidazolium cations and inhibiting their electrochemical reduction. This fact allows the surface sensitive electro-synthesis of HCOOH from CO2 reduction in [C2mim+][NTf2−], with Pt(110) being the most active electrode studied.

Surface irregularity factor as a parameter to evaluate the fatigue damage state of CFRP

This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accepted parameter for the evaluation of the fatigue damage state of composite materials. Constant amplitude fatigue loads (CAL) and realistic variable amplitude loads (VAL), representative of real in- flight conditions, have been applied to “dog bone” shaped tensile specimens. It has been shown that the measurement of the surface irregularity parameters can be applied to evaluate the damage state of a structure, and that it is independent of the type of fatigue load that has caused the damage. As a result, this measurement technique is applicable for a wide range of inspections of composite material structures, from pressurized tanks with constant amplitude loads, to variable amplitude loaded aeronautical structures such as wings and empennages, up to automotive and other industrial applications.

Förändringar i informationshanteringen med användandet av molntjänster : Förändringsanalys hos ett företag inom retailbranschen

Den här studien, som har bedrivits i samarbete med konsultföretaget Pipe, har studerat informationshanteringsprocessen hos småföretag inom retailbranschen. Företaget som ägnar sig åt butiksplanering med hjälp av CAD-program har idag ingen koppling mellan CAD-programmet och den molndatabas som lagrar information. Syftet med arbetet är att beskriva hur ett åtgärdsförslag skulle kunna se ut för att företaget ska kunna förbättra sin informationshantering genom användandet utav en molndatabas. Vi har även beskrivit problemområdet kring kopplingar mellanmolndatabaser och designprogram. För att besvara studiens syfte har vi genomfört en fallstudie, och svaret på forskningsfrågorna, 1. Hur ser informationshanteringsprocessen ut idag? 2. Hur kan informationshanteringsprocessen förbättras? 2. Vilka arbetssteg skulle kunna tas bort om företaget inför en koppling mellanmolndatabasen och designprogrammet? 3. Är en molnbaserad lösning ett möjligt alternativ för att använda för småföretag i retailbranschen? 4. Hur ser det ut i andra branscher som använder sig av CAD-program? Har vi hittat genom att genomföra intervjuer. Intervjuerna har hjälpt oss att genomföra en förändringsanalys där vi genom handlingsgrafer och mål- och problemlistor har kommit fram till ett antal åtgärdsförslag som företaget bör genomföra för att förbättra sin informationshanteringsprocess. Utifrån förändringsanalysen har vi kunnat dra slutsatsen att informationshanteringsprocessen skulle kunna förbättras och snabbas upp genom att införa en koppling mellan designprogrammet och en molndatabas. Detta skulle innebära att material automatiskt laddas upp från designprogrammet tillmolndatabasen, som även kunden har tillgång till. På så sätt samlas all information på ett och samma ställe. Genom litteraturstudier har vi också kommit fram till att en molnbaserad lösning vore möjligt för företaget, då det är en billig och smidig lösning för företag som inte har så stora resurser.

Crystallographic characterization of the first reported crystalline form of the potent hallucinogen (R)-2-amino-1-(8-bromobenzo[1,2-b;5,4-b']difuran-4-yl)propane or `bromodragonfly': the 1:1 anhydrous proton-transfer compound with 3,5-dinitrosalicylic acid

The 1:1 proton-transfer compound of the potent substituted amphetamine hallucinogen (R)-1-(8-bromobenzo[1,2-b; 4,5-b']difuran-4-yl)-2-aminopropane (common trivial name 'bromodragonfly') with 3,5-dinitrosalicylic acid, 1-(8-bromobenzo[1,2-b;4,5-b']difuran-4-yl)-2-mmoniopropane 2-carboxy-4,6-dinitrophenolate, C13H13BrNO2+ C7H3N2O7- forms hydrogen-bonded cation-anion chain substructures comprising undulating head-to-tail anion chains formed through C(8) carboxyl O-H...O(nitro) associations and incorporating the aminium groups of the cations. The intra-chain cation-anion hydrogen-bonding associations feature proximal cyclic R33(8) interactions involving both a N+-H...O(phenolate) and the carboxyl O--H...O(nitro)associations. Also present are aromatic pi-pi ring interactions [minimum ring centroid separation, 3.566(2)A; inter-plane dihedral angle, 5.13(1)deg]. A lateral hydrogen-bonding interaction between the third aminium proton and a carboxyl O acceptor link the chain substructures giving a two-dimensional sheet structure. This determination represents the first of any form of this compound and confirms that it has the (R) absolute configuration. The atypical crystal stability is attributed both to the hydrogen-bonded chain substructures provided by the anions, which accommodate the aminium proton-donor groups of the cations and give cross-linking, and to the presence of cation--anion aromatic ring pi-pi interactions.