Acute ethanol intake induces superoxide anion generation and mitogen-activated protein kinase phosphorylation in rat aorta: A role for angiotensin type 1 receptor

Ethanol intake is associated with increase in blood pressure, through unknown mechanisms. We hypothesized that acute ethanol intake enhances vascular oxidative stress and induces vascular dysfunction through renin-angiotensin system (RAS) activation. Ethanol (1 g/kg; p.o. gavage) effects were assessed within 30 min in male Wistar rats. The transient decrease in blood pressure induced by ethanol was not affected by the previous administration of losartan (10 mg/kg; p.o. gavage), a selective ATI receptor antagonist. Acute ethanol intake increased plasma renin activity (PRA), angiotensin converting enzyme (ACE) activity, plasma angiotensin I (ANG I) and angiotensin II (ANG II) levels. Ethanol induced systemic and vascular oxidative stress, evidenced by increased plasma thiobarbituric acid-reacting substances (TBARS) levels, NAD(P) H oxidase-mediated vascular generation of superoxide anion and p47phox translocation (cytosol to membrane). These effects were prevented by losartan. Isolated aortas from ethanol-treated rats displayed increased p38MAPK and SAPK/JNK phosphorylation. Losartan inhibited ethanol-induced increase in the phosphorylation of these kinases. Ethanol intake decreased acetylcholine-induced relaxation and increased phenylephrine-induced contraction in endothelium-intact aortas. Ethanol significantly decreased plasma and aortic nitrate levels. These changes in vascular reactivity and in the end product of endogenous nitric oxide metabolism were not affected by losartan. Our study provides novel evidence that acute ethanol intake stimulates RAS activity and induces vascular oxidative stress and redox-signaling activation through AT(1)-dependent mechanisms. These findings highlight the importance of RAS in acute ethanol-induced oxidative damage. (c) 2012 Elsevier Inc. All rights reserved.

Estudio de la estabilidad genética asociada a los procesos de crioconservación de ápices de menta

La crioconservación se ha descrito como una técnica de conservación ex situ a largo plazo que ha sido aplicada con éxito a numerosas especies, y resulta especialmente importante en aquellas con propagación vegetativa, infértiles o amenazadas, en las que sistemas de conservación ex situ más sencillos, como los bancos de semillas, no son posibles. También presenta ventajas frente a la conservación in vitro, ya que logra disminuir o eliminar problemas como la excesiva manipulación del material, evitando los subcultivos periódicos y disminuyendo así el riesgo de contaminaciones y de aparición de variación somaclonal. Sin embargo, someter al material vegetal a los procedimientos que implica la crioconservación provoca distintos estreses. Entre ellos, el estrés oxidativo puede potencialmente producir daños en membranas, proteínas, carbohidratos y en el ADN. En este trabajo se han evaluado diversos sistemas de crioconservación en ápices de Mentha × piperita L., híbrido estéril entre Mentha aquatica L. y Mentha spicata L. Se han utilizado ápices de dos genotipos (‘MEN 186’y ‘MEN 198’) en los cuales se compararon dos técnicas de crioconservación, encapsulación-deshidratación y vitrificación-droplet. El análisis de la supervivencia y capacidad de regeneración del material sometido a los tratamientos de crioconservación, junto con el análisis de la estabilidad genética de dicho material mediante marcadores moleculares (RAPD y AFLP) han permitido comparar los distintos protocolos y tratamientos establecidos. El estudio sobre el tipo de protocolo empleado reveló una mayor variabilidad genética en la técnica de encapsulación-deshidratación, especialmente en el genotipo ‘MEN 186’, ya que ‘MEN 198’ resultó ser más estable en todos los análisis. La inestabilidad encontrada en esta técnica no fue exclusiva de aquellos explantos crioconservados, sino que los pasos previos a la inmersión en nitrógeno líquido (NL) también provocaron variaciones en el ADN. Según el tipo de muestra analizada se encontraron diferencias en la estabilidad: muestras provenientes de callos presentaron una mayor inestabilidad que aquellas de hojas (brotes). Se utilizaron tres medios para la recuperación de los ápices tras la crioconservación con el uso de diferentes combinaciones de reguladores de crecimiento: “Reed” (0,5 mgL-1 6-bencilaminopurina, BAP), “Senula” (0,5 mgL-1 6-dimetilalilamino-purina, 2-iP + 0,1 mgL-1 ácido α-naftalen-acético, ANA) y “Nudos” (0,5 mgL-1 BAP + 0,1 mgL-1ANA). El medio “Reed” produjo un aumento en la supervivencia y recuperación de los ápices en ambos genotipos y técnicas, y disminuyó la formación de callo. Sin embargo, no tuvo un efecto significativo en la estabilidad genética. El medio “Senula” provocó una mayor estabilidad genética en el genotipo más inestable, ‘MEN 186’. Para reducir el daño oxidativo producido durante la encapsulación-deshidratación, e incrementar la recuperación de los ápices manteniendo su estabilidad genética, se comparó el efecto de añadir sustancias antioxidantes en el precultivo de los ápices (ácido ascórbico, vitamina E y glutatión). No se obtuvo la respuesta esperada y estos tratamientos no presentaron efectos significativos tanto en la estabilidad como en la recuperación. Para entender mejor qué sucede durante todo el proceso de encapsulación-deshidratación, se evaluó cada paso del protocolo por separado y su efecto en la estabilidad y la recuperación. Además, se determinó el estado de oxidación en cada etapa mediante la cuantificación de malondialdehído y la detección de la formación de radicales libres (mediante el ensayo del ácido tiobarbitúrico, y sondas fluorescentes específicas, respectivamente). Se determinó que a partir de los primeros pasos se genera estrés oxidativo, el cual aumenta a medida que se avanza por el protocolo hasta la inmersión en nitrógeno líquido. Esto se ve reflejado en la disminución progresiva tanto de la recuperación como de la estabilidad genética. Con el uso de antioxidantes en el precultivo (ácido ascórbico y vitamina E) no se obtuvo un efecto positivo en el mantenimiento de la estabilidad genética, y tan sólo con el uso de vitamina E se observó una recuperación mayor en uno de los pasos estudiados (después de la desecación). Sin embargo, cuando se utilizó ácido ascórbico durante el precultivo o la deshidratación osmótica se consiguió disminuir de forma significativa la formación de MDA y la acumulación del radical superóxido (O2•-) en la mayoría los pasos analizados, aunque esta reducción no parece tener un efecto directo en la estabilidad genética del material recuperado. ABSTRACT Cryopreservation has been described as an effective technique for the long term of ex situ conservation that has been successfully applied to numerous species, and is of especial relevance for those with vegetative propagation, infertile or endangered, in which simpler systems of ex situ conservation, such as seed banking, are not feasible. It also has advantages over in vitro conservation, as it reduces or eliminates excessive material handling, avoids periodic subcultures and thus limits the risk of contamination and the appearance of somaclonal variation. However, plant material is subjected to different treatments involved in the cryopreservation procedures, which impose several stresses. Among them, oxidative stress can potentially cause damage to membranes, proteins, carbohydrates and DNA. In this work, two cryopreservation techniques have been evaluated in Mentha × piperita L. shoot tips, sterile hybrid between Mentha aquatica L. and Mentha spicata L. Two genotypes ('MEN 186' and 'MEN 198') were used to compare two techniques: encapsulation-dehydration and droplet-vitrification. The analysis of survival and recovery capacity of the material after the cryopreservation treatments, and the analysis of the genetic stability by molecular markers (RAPD and AFLP) have enabled the comparison between protocols and treatments. The study of the two cryopreservation procedures revealed a higher genetic variability in the encapsulation-dehydration technique, especially in genotype 'MEN 186', as 'MEN 198' was more stable in all analyses. The instability generated in this technique was not exclusive of cryopreserved explants, pretreatments prior to immersion in NL also caused DNA variations. The type of sampled plant material revealed also differences in the stability: callus samples showed greater instability than shoots. Three different culture media were used for the recovery of shoot tips after cryopreservation, using different combinations of growth regulators: "Reed" (0.5 mgL-1 6-benzylaminopurine, BAP), "Senula" (0.5 mgL-1 6-dimetilalilamino-purine, 2-iP + 0.1 mgL-1 α-naphthalene acetic acid, ANA) and "Nodes" (0.5 mgL-1 BAP + 0.1 mgL-1 ANA). "Reed" medium increased survival and recovery of shoot tips in both genotypes and techniques and decreased callus formation. However, it didn`t have a significant effect on genetic stability. "Senula" medium caused a higher genetic stability in the most unstable genotype, 'MEN 186'. To reduce oxidative damage during encapsulation-dehydration, and increase shoot tip recovery and maintain genetic stability, the effect of added antioxidants (ascorbic acid, vitamin E and glutathione) in the shoot tip preculture medium was studied. These treatments had no significant effect on both stability and recovery. To better understand the events during the encapsulation-dehydration process, the effect of each step of the protocol on stability and recovery was evaluated separately. Moreover, the oxidation level was determined by quantifying malondialdehyde (MDA) formation and detecting free radical accumulation (using the thiobarbituric acid assay, and specific fluorescent probes, respectively). The oxidative stress was detected from the first steps and increased throughout the protocol until the immersion in liquid nitrogen. This was also reflected in the gradual decline of recovery and genetic stability. The use of antioxidants (ascorbic acid and vitamin E) in the shoot tip preculture medium had no effect in maintaining genetic stability; only vitamin E increased recovery in one of the steps studied (after desiccation). However, when ascorbic acid was used during the preculture or during the osmotic dehydration, a significantly decrease was observed in MDA formation and superoxide radical accumulation in most of the steps analyzed, although this reduction did not seem to have a direct effect on the genetic stability of recovered material.

Optimisation of Spirulina platensis convective drying: evaluation of phycocyanin loss and lipid oxidation

The aim of the study was the optimisation of Spirulina platensis drying on convective hot air through the response surface methodology. The responses were thiobarbituric acid (TBA) and phycocyanin loss percentage values in final product. Experiments were carried out in perforated tray drier with parallel air flow, and the wet samples thickness and drying air temperatures were in range of 3–7 mm and 50–70 °C, respectively. The statistical analysis showed significant effect (P < 0.05) for air temperature and samples thickness. In the best drying condition, 55 °C and 3.7 mm, presented the phycocyanin loss percentage and the TBA values of approximately 37% and 1.5 mgMDA kg−1, respectively. In this drying condition, the fatty acids composition of the microalgae Spirulina did not show significance difference (P > 0.05) in relation to fresh biomass. The lipid profile of dried product presented high percentage of polyunsaturated fatty acids (34.4%), especially the gamma-linolenic acid (20.6%).

Óleo de carpa (cyprinus carpio): obtenção, refino e produção de concentração de ácidos graxos poliinsaturados

O objetivo do presente trabalho foi analisar as características e os perfis lipídicos dos óleos brutos e refinados de rejeitos de carpa comum (Cyprinus carpio), obtidos através dos processos de ensilagem ácida e termomecânico de farinha de pescado. Também foram realizados o estudo da reação de alcoólise química do óleo de carpa e obtenção de concentrados de concentrados de ácidos graxos poliinsaturados (PUFAs), através da reação de complexação com uréia. O rendimento obtido em óleo bruto para ambos os processos foi em torno de 85% em relação ao óleo presente nas vísceras de carpa. Os óleos brutos obtidos através do processo de ensilagem e do processo termomecânico apresentaram diferenças significantivas (P < 0,05) para ácidos graxos livres, índice de peróxido, valor do ácido tiobarbitúrico e cor Lovibond. Entretanto, os óleos refinados obtidos por ambos os processos não apresentaram diferença significativa para a cor Lovibond, ácidos graxos livres e valores do ácido tiobarbitúrico. Os principais ácidos graxos identificados nos óleos bruto, branqueado e refinado de vísceras de carpa foram oléico, palmítico, palmitoléico, linoléico e linolênico constituindo aproximadamente 69,6% dos ácidos graxo totais do óleo refinado. A relação ω3/ω6 foi de aproximadamente 1,05 para o óleo refinado. Assim, o óleo refinado das vísceras de carpa pode ser considerado uma rica fonte de ácidos graxos essenciais do grupo ω3 e ω6. No estudo da reação de alcoólise química e obtenção dos concentrados de ácidos graxos poliinsaturados, foi realizada a comparação de três tratamentos para reação de alcoólise variando-se a concentração molar óleo:álcool (1:21, 1:27 e 1:39). Os tratamentos apresentaram diferenças significativas para as respostas rendimento em massa de ácidos graxos livres e índice de acidez. O maior rendimento para a reação de alcoólise foi utilizando a concentração molar de 1:39 (óleo:álcool). Na fração não complexada com uréia obteve-se aumento percentual de ácidos graxos insaturados e poliinsaturados de 31,9%, redução de saturados de 75%, e aumento do conteúdo dos ácidos graxos eicosapentaenóico e docosahexaenóico (EPA+DHA) de 85,3%. A fração não complexada com uréia pode ser considerada uma rica fonte de ácidos graxos poliinsaturados e insaturados com um total de 88,9% desses ácidos graxos.

Secagem convectiva da microalga spirulina platensis: avaliação das propriedades físicas e bioquímicas

O objetivo no presente estudo foi investigar a operação de secagem da microalga Spirulina platensis em camada delgada através da modelagem matemática e otimização da operação, avaliando as características do produto final através de análises físico-químicas. Foram analisados os dados da umidade de equilíbrio para a isoterma de adsorção a 10, 20 e 30°C e de dessorção a 40, 50 e 60°C, através dos modelos de GAB e BET. O calor isostérico foi determinado pela aplicação da equação de Clausius-Clapeyron. O modelo de GAB apresentou melhor ajuste aos dados experimentais. Os valores da área superficial calculados pelos modelos de GAB e BET foram próximos. O calor isostérico e a entropia diferencial da isoterma de dessorção apresentaram comportamento similar. A teoria da compensação entalpia-entropia foi aplicada nas isotermas, indicando que são controladas pela entalpia. A cinética de secagem foi analisada na faixa de temperatura de 50-70°C, através dos modelos de Lewis, Henderson e Pabis, Henderson, Page e Overhults. O modelo de Henderson e Pabis foi escolhido por apresentar maior significado físico para estimar o valor de difusividade efetiva (Def), sendo os valores encontrados na faixa de 5,54 - 6,60×10-11 m 2 /s, para as temperaturas de 50 e 60°C, respectivamente, e de 1,58×10-10 m2 /s para a temperatura de 70°C. A energia de ativação apresentou um valor de 47,9 kJ/mol. A secagem alterou a cor quando comparada ao material in natura. A secagem foi otimizada na faixa de espessuras e temperaturas do ar de secagem de 3-7 mm e de 50-70ºC, respectivamente, através da metodologia de superfície de resposta para ácido tiobarbitúrico (TBA) e perda de ficocianina no produto final. A melhor condição de secagem foi a 55°C e a 3,7 mm, apresentando uma perda de ficocianina de aproximadamente 37% e valor de TBA de 1,5 mgMDA/kgamostra. Nesta condição de secagem, a composição de ácidos graxos da microalga Spirulina não apresentou diferença significativa (P > 0,05) em relação a microalga in natura.

Stability and Local Toxicity Evaluation of a Liposomal Prilocaine Formulation

This study reports a physicochemical stability evaluation of a previously reported liposomal prilocaine (PLC(LUV)) formulation (Cereda el al. J. Pharm. Pharmaceut. Sci. 7:235, 2004) before and after steam sterilization as well as its local toxicity evaluation. Prilocaine (PLC) was encapsulated into extruded unilamellar liposomes (LUVs) composed by egg phosphatidylcholine:cholesterol:alfa-tocopherol (4:3:0.07, mole %). Laser light-scattering analysis (p > 0.05) and thiobarbituric acid reaction (p > 0.05) were used to evaluate the liposomes physical (size) and chemical (oxidation) stability, respectively. The prilocaine chemical stability was followed by (1)H-nuclear magnetic resonance. These tests detected no differences on the physicochemical stability of PLC or PLCLUV, sterilized or not, up to 30 days after preparation (p > 0.05). Finally, the paw edema test and histological analysis of rat oral mucosa were used to assess the possible inflammatory effects of PLC(LUV). PLC(LUV) did not evoke rat paw edema (p > 0.05), and no significant differences were found in histological analysis, when compared to the control groups (p > 0.05). The present work shows that PLC(LUV) is stable for a 30-day period and did not induce significant inflammatory effects both in the paw edema test and in histological analysis, giving supporting evidence for its safely and possible clinical use in dentistry.

Physicochemical and antioxidant properties of the pequi (Caryocar brasiliense Camb.) almond oil obtained by handmade and cold-pressed processes.

Abstract: The aim of this study is to characterize physical and chemically and determine the antioxidant capacity of pequi almond oils (PAO) extracted by handmade and by cold-pressing. Both oils showed good quality by acid, peroxide and thiobarbituric acid values. The fatty acid (FA) profile showed a significant presence of monounsaturated FA, mainly oleic acid (53.48 to 55.41%); saturated FA, such as palmitic acid (33.30 to 35.89 %); and polyunsaturated FA (PUFA), such as linoleic acid (5.85 to 7.23%). The total phenolic (TP) and carotenoid content ranged in concentration from 87.56 to 392.00 mg GAE/100 g and 36.03 to 262.40 mg/100 g, respectively. The tocopherol and phytosterol results indicated the predominant presence of α-tocopherol (52 to 67%) and stigmasterol (63 to 68 %). The antioxidant capacity of PAO as measured using the 2,2-diphenyl-1-picrylhydrazyl (DPPH?) method oscillated from 58.48 mg/mL to 76.46 mg/mL (IC50), from 10.61 to 40.46 µmol TE/g by the 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) (ABTS?+) method, and from 113.93 to 280.85 µmol TE/100 g and 164.49 to 277.86 µmol TE/100 g, by the lipophilic and hydrophilic oxygen radical absorbance capacity (ORAC) methods, respectively. The oils presented a good oxidative and thermal stability by Rancimat method (IP of 7.33 a 15.91 h) and curves thermogravimetric and differential scanning calorimetry (To 337-363 °C and 159-184 °C, respectively). The results confirmed the presence of compounds that conferred antioxidant capacity and oxidative and thermal resistance for PAO made by handmade or cold-pressing, indicating that these oils can potentially be used for food and non-food applications.

Effect of reactive bed mineralogy on arsenic retention and permeability of synthetic arsenic-containing acid mine drainage

Successive alkalinity producing systems (SAPSs) are widely used for treating acid mine drainage (AMD) and alleviating clogging commonly occurring in limestone systems due to an amorphous ferric precipitate. In this study, iron dust, bone char, micrite and their admixtures were used to treat arseniccontaining AMD. A particular interest was devoted to arsenic removal performance, mineralogical constraints on arsenic retention ability and permeability variation during column experiment for 140 days. The results showed that the sequence of the arsenic removal capacity was as follows: bone char > micrite > iron dust. The combination of 20% v/v iron dust and 80% v/v bone char/micrite columns can achieve better hydraulic conductivity and phosphorus-retention capacity than single micrite and bone char columns. The addition of iron dust created reductive environment and resulted in the transformation of coating material from colloidal phase to secondary mineral phase, such as green rust and phosphoerrite, which obviously ameliorates hydraulic conductivity of systems. The sequential extraction experiments indicated that the stable fractions of arsenic in columns were enhanced with help of iron dust compared to single bone char and micrite columns. A combination of iron dust and micrite/bone char represented a potential SAPS for treating As-containing AMD.

Grafting acrylic acid onto polypropylene by reactive extrusion with pre-irradiated PP as initiator

In this paper, the modification of polypropylene (PP) with acrylic acid (AA) by reactive extrusion using pre-irradiated PP (rPP) as initiator was investigated. It was found the relatively high graft degree (Gd) and slight degradation of modified PP was obtained when 20 wt% rPP was used. This result can be explained in terms of effective concentration of free radicals.

Reactive compatibilization of LLDPE/PS blends with a new type of Lewis acid as catalyst

The reactive compatibilization of LLDPE/PS (50/50 wt%) was achieved by Friedel-Crafts alkylation reaction with a combined Lewis acids (Me3SiCl and InCl3 center dot 4H(2)O) as catalyst. The graft copolymer at the interface was characterized by Fourier transform infrared spectroscopy and the morphology of the blends was analysized by scanning electron microscopy. It was found that the combined Lewis acids had catalytic effect on Friedel-Crafts alkylation reaction between LLDPE and PS, and the catalytic effect was maximal when the molar ratio of InCl3 center dot 4H(2)O to Me3SiCl was 1:5. The graft copolymer LLDPE-g-PS was formed via the F-C reaction and worked as a tailor-made compatibilizer to reduce the interfacial tension. The mechanical properties of reactive blend with combined Lewis acids as catalyst was notably improved compared to that of physical LLDPE/PS blend and serious degradation had been decreased compared to the reactive blend system with AlCl3 as catalyst; we interpreted the above results in term of acidity of combined Lewis acids.

Kinetics study on melt grafting copolymerization of LLDPE with acid monomers using reactive extrusion method

Graft copolymerization in the molten state is of fundamental importance as a probe of chemical modification and reactive compatibilization. However, few grafting kinetics studies on reactive extrusion were carried out for the difficulties as expected. In this work, the macromolecular peroxide-induced grafting of acrylic acid and methyl methacrylate onto linear low density polyethylene by reactive extrusion was chosen as the model system for the kinetics study; the samples were taken out from the barrel at five ports along screw axis and analyzed by FTIR, H-1 NMR, and ESR. For the first time, the time-evolution of reaction rate, the reaction order, and the activation energy of graft copolymerization and homopolymerization in the twin screw extruder were directly obtained. On the basis of these results, the general reaction mechanism was tentatively proposed. It was demonstrated that an amount of chain propagation free radicals could keep alive for several minutes even the peroxides completely decomposed and the addition of monomer to polymeric radicals was the rate-controlled step for the graft copolymerization.

Substance P released by TRPV1-expressing neurons produces reactive oxygen species that mediate ethanol-induced gastric injury

Although neurokinin 1 receptor antagonists prevent ethanol (EtOH)-induced gastric lesions, the mechanisms by which EtOH releases substance P (SP) and SP damages the mucosa are unknown. We hypothesized that EtOH activates transient receptor potential vanilloid 1 (TRPV1) on sensory nerves to release SP, which stimulates epithelial neurokinin 1 receptors to generate damaging reactive oxygen species (ROS). SP release was assayed in the mouse stomach, ROS were detected using dichlorofluorescein diacetate, and neurokinin 1 receptors were localized by immunofluorescence. EtOH-induced SP release was prevented by TRPV1 antagonism. High dose EtOH caused lesions, and TRPV1 or neurokinin 1 receptor antagonism and neurokinin 1 receptor deletion inhibited lesion formation. Coadministration of low, innocuous doses of EtOH and SP caused lesions by a TRPV1-independent but neurokinin 1 receptor-dependent process. EtOH, capsaicin, and SP stimulated generation of ROS by superficial gastric epithelial cells expressing neurokinin 1 receptors by a neurokinin 1 receptor-dependent mechanism. ROS scavengers prevented lesions induced by a high EtOH dose or a low EtOH dose plus SP. Gastric lesions are caused by an initial detrimental effect of EtOH, which is damaging only if associated with TRPV1 activation, SP release from sensory nerves, stimulation of neurokinin 1 receptors on epithelial cells, and ROS generation.

Increased Reactive Oxygen Species and Tumor Necrosis Factor-Alpha Production by Monocytes are Associated with Elevated Levels of Uric Acid in Pre-Eclamptic Women

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relation of Uric Acid to Serum Levels of High-Sensitivity C-Reactive Protein, Triglycerides, and High-Density Lipoprotein Cholesterol and to Hepatic Steatosis

Increased uric acid (UA) is strongly linked to cardiovascular disease. However, the independent role of UA is still debated because it is associated with several cardiovascular risk factors including obesity and metabolic syndrome. This study assessed the association of UA with increased high-sensitivity C-reactive protein (hs-CRP), increased ratio of triglyceride to high-density lipoprotein cholesterol (TG/HDL), sonographically detected hepatic steatosis, and their clustering in the presence and absence of obesity and metabolic syndrome. We evaluated 3,518 employed subjects without clinical cardiovascular disease from November 2008 through July 2010. Prevalence of tis-CRP >= 3 mg/L was 19%, that of TG/HDL >= 3 was 44%, and that of hepatic steatosis was 43%. In multivariable logistic regression after adjusting for traditional cardiovascular risk factors and confounders, highest versus lowest UA quartile was associated with hs-CRP >= 3 mg/L (odds ratio [OR] 1.52, 95% confidence interval [CI] 1.01 to 2.28, p = 0.04), TG/HDL >= 3 (OR 3.29, 95% CI 2.36 to 4.60, p <0.001), and hepatic steatosis (OR 3.10, 95% CI 2.22 to 4.32, p <0.001) independently of obesity and metabolic syndrome. Association of UA with hs-CRP >= 3 mg/L became nonsignificant in analyses stratified by obesity. Ascending UA quartiles compared to the lowest UA quartile demonstrated a graded increase in the odds of having 2 or 3 of these risk conditions and a successive decrease in the odds of having none. In conclusion, high UA levels were associated with increased TG/HDL and hepatic steatosis independently of metabolic syndrome and obesity and with increased hs-CRP independently of metabolic syndrome. (C) 2012 Elsevier Inc. All rights reserved. (Am J Cardiol 2012;110:1787-1792)