Virtual Communities of Practice: Design and Development of Support Platforms and Participation Fostering

Mestrado em Engenharia Informática - Área de Especialização em Sistemas Gráficos e Multimédia

EPIDEMIOLOGICAL SURVEY ON CANINE POPULATION WITH THE USE OF IMMUNOLEISH SKIN TEST IN ENDEMIC AREAS OF HUMAN AMERICAN CUTANEOUS LEISHMANIASIS IN THE STATE OF RIO DE JANEIRO, BRAZIL

A survey for canine tegumentary leishmaniasis (CTL) has been carried out between 1986 and 1993 in seven endemic localities for American cutaneous leishmaniasis in the State of Rio de Janeiro. 270 dogs have been examined for their clinical aspects, the development of delayed hypersensitivity (DHS) with Immunoleish antigen and with immunofluorescent antibody research of IgG (IF). 28.2% of them had ulcer lesions and 3.3% had scars. The lesions consisted of single (39.5%) and mucocutaneous lesions (31.6%), multiple cutaneous (25.0%) and mucocutaneous lesions associated with cutaneous ulcers (4.0%). Twelve (15.8%) isolates from biopsies were analyzed by zimodeme and schizodeme and identified as L. (V.) braziliensis. The overall prevalence of canine infection that was evaluated with the skin test was of 40.5% and with IF it was of 25.5%. Both tests showed a high positive rate with relation to the animals with mucosal lesions, as in the case of human mucocutaneous leishmaniasis. The comparison of the two tests showed the skin test to have a better performance although there was no statistical difference (p>0.05) between them. The proportional sensitivity and specificity was of 84.0% and 74.0%, respectively. The Immunoleish skin test and IF are useful tools to be employed in CTL field epidemiological surveys.

TEC4SEA - A Modular Platform for Research, Test and Validation of Technologies Supporting a Sustainable Blue Economy

This paper presents the TEC4SEA research infrastructure created in Portugal to support research, development, and validation of marine technologies. It is a multidisciplinary open platform, capable of supporting research, development, and test of marine robotics, telecommunications, and sensing technologies for monitoring and operating in the ocean environment. Due to the installed research facilities and its privileged geographic location, it allows fast access to deep sea, and can support multidisciplinary research, enabling full validation and evaluation of technological solutions designed for the ocean environment. It is a vertically integrated infrastructure, in the sense that it possesses a set of skills and resources which range from pure conceptual research to field deployment missions, with strong industrial and logistic capacities in the middle tier of prototype production. TEC4SEA is open to the entire scientific and enterprise community, with a free access policy for researchers affiliated with the research units that ensure its maintenance and sustainability. The paper describes the infrastructure in detail, and discusses associated research programs, providing a strategic vision for deep sea research initiatives, within the context of both the Portuguese National Ocean Strategy and European Strategy frameworks.

Replacement of HIV p24 Ag test by a multiplex RT-PCR method for primary screening of blood donors

Nucleic Acid Testing (NAT) as a tool for primary screening of blood donors became a reality in the end of the 1990 decade. We report here the development of an "in-house" RT-PCR method that allows the simultaneous (multiplex) detection of HCV and HIV-RNA in addition to an artificial RNA employed as an external control. This method detects all HIV group M subtypes, plus group N and O, with a detection threshold of 500 IU/mL. After validation, the method replaced p24 Ag testing, in use for blood donation screening since 1996 at our services. From July 2001 to February 2006, 102,469 donations were tested and 41 (0.04%) were found HIV-RNA reactive. One NAT-only reactive donation (antibody non-reactive) was observed, with subsequent seroconversion of the implied donor, giving a yield of 1:102,469. This rate is in contrast to the international experience that reports a detection of approximately 1:600,000 - 1:3,100,000 of isolated HIV-RNA donations.

Kitchen robot prod. line development. Proj. of Bowden cables cutting and thermal forming machine.

This document presents particular description of work done during student’s internship in PR Metal company realized as ERASMUS PROJECT at ISEP. All information including company’s description and its structure, overview of the problems and analyzed cases, all stages of projects from concept to conclusion can be found here. Description of work done during the internship is divided here into two pieces. First part concerns one activities of the company which is robotic chefs (kitchen robot) production line. Work, that was done for development of this line involved several tasks, among them: creating a single-worker montage station for screwing robots housing’s parts, improve security system for laser welding chamber, what particularly consists in designing automatically closing door system with special surface, that protects against destructive action of laser beam, test station for examination of durability of heating connectors, solving problem with rotors vibrations. Second part tells about main task, realized in second half of internship and stands a complete description of machine development and design. The machine is a part of car handle latch cable production line and its tasks are: cutting cable to required length and hot-forming plastic cover for further assembly needs.

SUSCEPTIBILITY TEST FOR FUNGI: CLINICAL AND LABORATORIAL CORRELATIONS IN MEDICAL MYCOLOGY

SUMMARYDuring recent decades, antifungal susceptibility testing has become standardized and nowadays has the same role of the antibacterial susceptibility testing in microbiology laboratories. American and European standards have been developed, as well as equivalent commercial systems which are more appropriate for clinical laboratories. The detection of resistant strains by means of these systems has allowed the study and understanding of the molecular basis and the mechanisms of resistance of fungal species to antifungal agents. In addition, many studies on the correlation of in vitro results with the outcome of patients have been performed, reaching the conclusion that infections caused by resistant strains have worse outcome than those caused by susceptible fungal isolates. These studies have allowed the development of interpretative breakpoints for Candida spp. and Aspergillus spp., the most frequent agents of fungal infections in the world. In summary, antifungal susceptibility tests have become essential tools to guide the treatment of fungal diseases, to know the local and global disease epidemiology, and to identify resistance to antifungals.

Enhancing physical activity coaching through personalized motivational strategies and self-adaptive goal-setting: development of self-adaptive processes in a monitoring and coaching smartphone application

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Development of population-specific function assessment intrument in Lebanon

RESUMO: Contexto: O funcionamento tem sido reconhecido como um dos principais indicadores de resultados para avaliar se as pessoas beneficiam das intervenções destinadas a melhorar a sua saúde mental. O funcionamento refere-se à forma como um indivíduo consegue responder às suas tarefas e solicitações, dos seus familiares e da sua comunidade, de acordo com os requisitos do local e a cultura em que vive (eg, tarefa de cozinhar e limpar para as mulheres em algumas culturas ). O funcionamento é altamente dependente da cultura - por isso, tem sido recomendado o desenvolvimento de medidas de funcionamento específicas de cada cultura. Desenvolver localmente os instrumentos de medida evita problemas de adequação, associados com a adaptação de instrumentos ocidentais. Embora os instrumentos criados desta forma sejam específicos de um meio cultural, eles são simultaneamente "transculturais", no sentido em que cada um se refere às tarefas mais importantes para a população local . Esta abordagem mostrou-se útil para investigadores e agências de ajuda (eg, ONGs) que trabalham em países não-ocidentais . Este estudo descreve o trabalho da agência International Medical Corps (IMC) na criação e validação de um questionário de funcionamento específico nas dimensões cultura e gênero, no Líbano, destinado a avaliar eventuais melhorias em pessoas que receberam intervenções de para problemas de saúde mental, a nível dos cuidados primários de saúde. Método: O instrumento foi desenvolvido usando um método que é uma alternativa à abordagem existente de adaptação de instrumentos ocidentais a outras culturas e situações; esta abordagem é rápida e exequível, tendo já demonstrado ser útil no desenvolvimento de instrumentos válidos e fidedignos. Inicialmente, foi solicitado que as pessoas identificassem, de uma lista livre, as tarefas mais importantes para cuidar de si próprias, da sua família e da sua comunidade; as tarefas identificadas foram posteriormente usadas como base para um instrumento de avaliação de funcionamento culturalmente válido. A partir daqui, foram desenvolvidos questionários específicos da comunidade em questão, posteriormente testados no terreno nas vertentes da validade (de conteúdo, facial e de constructo) e da fiabilidade (teste-reste e inter-entrevistadores). Resultados. O estudo resultou na criação e validação de um questionário de funcionamento específico de cultura e gênero capaz de medir efectivamente a capacidade de execução de tarefas importantes do quotidiano,como parte da avaliação de resultados levada a cabo por profissionais da CSP previamente treinados na identificação, suporte e encaminhamento de pessoas com problemas de saúde mental no Líbano. Conclusão. Neste trabalho descreve-se o desenvolvimento de um questionário de funcionamento específico de cultura e gênero, orientado para a avaliação de resultados, num contexto mais lato de um sistema abrangente de avaliação e monitorização de um serviço comunitário. --------------ABSTRACT: Background. Functioning has been recognized as one of the most important key outcomes to assess whether people benefit from interventions aimed to improve their mental health. Functioning refers to how well na individual can complete the tasks and demands for themselves, their family, and their community which are required by them depending on the setting and the culture they live in (e.g. task of cooking and cleaning for women in some cultures). Functioning is highly dependent on culture. Therefore, it has been recommended to develop culture-specific measures of function. Developing instruments locally avoids the problems of limited local relevance and appropriateness associate with adapting western instruments. Although each instrument created in this way is culturally bound, they are “cross cultural” in the sense that each refers to the tasks most important to local people. This approach proves useful for both researchers and aid agencies working in non-western countries. This study describes International Medical Corps’ (IMC) work in Lebanon to create and validate a culture and gender specific functioning questionnaire to assess improvements in people who received treatment interventions for mental health problems at the primary health care (PHC) level. Method. The measure was developed using a method that is an alternative to the existing approach of adapting western function instruments to other cultures and situations; an approach which has been demonstrated as rapid, feasible and which can yield valid and reliable instruments. Function was assessed by first asking local people what tasks are important to care for themselves, their family and their community using free listing, then using these tasks as the basis for a culturally valid function assessment instrument. Community specific function questionnaires based on these tasks were then created, and field-tested for validity using content, face and construct validity methods, and also field tested for reliability using inter-rater and test retest reliability methods. Results. The study resulted in the creation and validation of a culture and gender specific functioning questionnaire that would effectively measure the ability to do tasks important to daily existence, as part of assessing client level outcomes where PHC providers were trained in the identification, management and referral of people with mental health problems in Lebanon. Conclusion. The paper describes a successful pilot for developing culture and gender specific functioning questionnaires that evaluate client level outcomes as part of a more comprehensive system for monitoring and evaluation of community based case management supports and services.

Precast concrete wall-foundation connection. Development of a seismic dissipative connection

Seismic events are a major factor to consider in structural design of buildings in many countries. With the purpose of saving lives, most of the design codes lead to structural solutions that withstand large seismic actions without collapsing, but without taking into account a possible usage of the structures after the earthquake. As a result, it is necessary to consider the time needed to repair/retrofit the damaged structures (i.e. the downtime) since this period of inactivity may result in huge financial implications for the occupants of the buildings. In order to minimise the damages and simplify repair operations, structural solutions with rocking systems and negligible residual displacements have been developed during the last two decades. Systems with precast concrete rocking walls were studied with the aim of investigat- ing suitable and convenient structural alternatives to minimise the damage in case of an earthquake. Experimental, numerical and analytical analyses on post-tensioned solutions, with and without energy dissipation devices, were carried out in this research. The energy dissipation devices were made from steel angles that were further developed during the research. Different solutions for these devices were experimentally tested under cyclic loading and the results are presented. Numerical and analytical work on steel angles was also carried out. Regarding the concrete rocking wall systems, two concrete rocking wall systems were studied: post-tensioned walls and post-tensioned walls with energy dissipation devices. In the latter, the solution was to fix them externally to the wall, allowing their easy replacement after an earthquake. It is shown that the dissipaters are a viable solution for use in precast concrete rocking wall systems. A building case study is presented. The comparison between a traditional monolithic system and a hybrid solution was carried out, allowing the evaluation of the efficiency of the solution that was developed.

Analysis, testing and development of safe cleaning methods of rusted stone material

Three different treatments were applied on several specimens of dolomitic and calcitic marble, properly stained with rust to mimic real situations (the stone specimens were exposed to the natural environment for about six months in contact with rusted iron). Thirty six marble specimens, eighteen calcitic and eighteen dolomitic, were characterized before and after treatment and monitored throughout the cleaning tests. The specimens were characterized by SEM-EDS (Scanning Electron Microscopy coupled with Energy Dispersion System), XRD (XRay Diffraction), XRF (X-Ray Fluorescence), FTIR (Fourier Transform Infrared Spectroscopy) and color measurements. It was also made a microscopic and macroscopic analysis of the stone surface along with the tests of short and long term capillary absorption. A series of test trials were conducted in order to understand which concentrations and contact times best suits to this purpose, to confirm what had been written to date in the literature. We sought to develop new methods of treatment application, skipping the usual methods of applying chemical treatments on stone substrates, with the use of cellulose poultice, resorting to the agar, a gel already used in many other areas, being something new in this area, which possesses great applicability in the field of conservation of stone materials. After the application of the best methodology for cleaning, specimens were characterized again in order to understand which treatment was more effective and less harmful, both for the operator and the stone material. Very briefly conclusions were that for a very intense and deep penetration into the stone, a solution of 3.5% of SDT buffered with ammonium carbonate to pH around 7 applied with agar support would be indicated. For rust stains in its initial state, the use of Ammonium citrate at a concentration of 5% buffered with ammonium to pH 7 could be applied more than once until satisfactory results appear.

Development of cognitive abilities of children infected with helminths through health education

INTRODUCTION: The aim of this study was to evaluate the effect of health education in learning and cognitive development of children infected, previously treated in an endemic area for helminthiasis. METHODS: It is a longitudinal, experimental, with random allocation of participants. The study included 87 children of both sexes enrolled in the school hall of Maranhão, State of Minas Gerais, Brazil, and divided into two groups: intervention and control. Initially the children were submitted to the parasitological fecal examination for infection diagnosis and, when positive, they were treated. For the data collection, a structured questionnaire and the psychological tests Raven, Wisc-III and DAP III were applied, before and after the educational intervention. For the group comparison, the Mann Whitney test was used, and established significance level of 5%. RESULTS: It was found that previously infected children who received the educational intervention, children showed higher performance than the control group in strutured questionnaire (p<0.05). CONCLUSIONS: It is acceptable to suppose the positive influence and the importance in the use of educational interventions in the cognitive recovery and learning of children previously treated with anthelmintics.

Risk-benefit assessment of Bacillus Calmette-Guérin vaccination, anti-phenolic glycolipid I serology, and Mitsuda test response: 10-year follow-up of household contacts of leprosy patients

Abstract: INTRODUCTION: Despite multidrug therapy, leprosy remains a public health issue. The intradermal Bacillus Calmette-Guérin (BCG) vaccine, Mitsuda test (lepromin skin test), and anti-phenolic glycolipid I (PGL-I) serology are widely used in leprosy studies and have shown great epidemiological value. METHODS: This longitudinal study evaluated the relative risks and benefits of these three tools by comparing results observed in household contacts (HHCs) of leprosy patients who developed leprosy with those of HHCs who did not in a population of 2,992 individuals monitored during a 10-year period. RESULTS : Seventy-five (2.5%) new leprosy cases were diagnosed, including 28 (0.9%) co-prevalent cases. Therefore, for the risk-benefit assessment, 47 (1.6%) HHCs were considered as truly diagnosed during follow-up. The comparison between healthy and affected contacts demonstrated that not only did BCG vaccination increase protection, but boosters also increased to 95% relative risk (RR) reduction when results for having two or more scars were compared with having no scars [RR, 0.0459; 95% confidence interval (CI), 0.006-0.338]. Similarly, Mitsuda reactions >7mm in induration presented 7-fold greater protection against disease development compared to reactions of 0-3mm (RR, 0.1446; 95% CI, 0.0566-0.3696). In contrast, anti-PGL-I ELISA seropositivity indicated a 5-fold RR increase for disease outcome (RR, 5.688; 95% CI, 3.2412-9.9824). The combined effect of no BCG scars, Mitsuda reaction of <7mm, and seropositivity to anti-PGL-I increased the risk for leprosy onset 8-fold (RR, 8.109; 95% CI, 5.1167-12.8511). CONCLUSIONS: The adoption of these combined assays may impose measures for leprosy control strategies.

Assessing the feasibility of impregnating phase change materials in lightweight aggregate for development of thermal energy storage systems

This paper assesses the feasibility of impregnation/encasement of phase change materials (PCMs) in lightweight aggregates (LWAs). An impregnation process was adopted to carry out the encasement study of two different PCMs in four different LWAs. The leakage of the impregnated/encased PCMs was studied when they were submitted to freeze/thawing and oven drying tests, separately. The results confirmed that, the impregnation/encasement method is effective with respect to the large thermal energy storage density, and can be suitable for applications were PCMs cannot be incorporated directly such as asphalt road pavements.

Assessment of overlay masonry strengthening system under in-plane monotonic and cyclic loading using the diagonal tensile test

The development of novel strengthening techniques to address the seismic vulnerability of masonry elements is gradually leading to simpler, faster and more effective strengthening strategies. In particular, the use of fabric reinforced cementitious matrix systems is considered of great potential, given the increase of ductility achieved with simple and economic strengthening procedures. To assess the effectiveness of these strengthening systems, and considering that the seismic action is involved, one important component of the structural behaviour is the in-plane cyclic response. In this work is discussed the applicability of the diagonal tensile test for the assessment of the cyclic response of strengthened masonry. The results obtained allowed to assess the contribution of the strengthening system to the increase of the load carrying capacity of masonry elements, as well as to evaluate the damage evolution and the stiffness degradation mechanisms developing under cyclic loading.

Qualitative risk assessment during polymer mortar test specimens preparation - methods comparison

Polymer binder modification with inorganic nanomaterials (NM) could be a potential and efficient solution to control matrix flammability of polymer concrete (PC) materials without sacrificing other important properties. Occupational exposures can occur all along the life cycle of a NM and “nanoproducts” from research through scale-up, product development, manufacturing, and end of life. The main objective of the present study is to analyse and compare different qualitative risk assessment methods during the production of polymer mortars (PM) with NM. The laboratory scale production process was divided in 3 main phases (pre-production, production and post-production), which allow testing the assessment methods in different situations. The risk assessment involved in the manufacturing process of PM was made by using the qualitative analyses based on: French Agency for Food, Environmental and Occupational Health & Safety method (ANSES); Control Banding Nanotool (CB Nanotool); Ecole Polytechnique Fédérale de Lausanne method (EPFL); Guidance working safely with nanomaterials and nanoproducts (GWSNN); Istituto Superiore per la Prevenzione e la Sicurezza del Lavoro, Italy method (ISPESL); Precautionary Matrix for Synthetic Nanomaterials (PMSN); and Stoffenmanager Nano. It was verified that the different methods applied also produce different final results. In phases 1 and 3 the risk assessment tends to be classified as medium-high risk, while for phase 2 the more common result is medium level. It is necessary to improve the use of qualitative methods by defining narrow criteria for the methods selection for each assessed situation, bearing in mind that the uncertainties are also a relevant factor when dealing with the risk related to nanotechnologies field.