Integrating woodland with pig production in the United Kingdom: an investigation of potential performance and interactions

Although silvopastoral systems involving pigs were once widespread in Britain, the practice has largely died out. However, recent changes in pig production techniques, consumer demands and the economic climate within which farmers operate, have led to renewed interest in both traditional and novel tree-pig systems. This paper describes a financial spreadsheet model (MAST) that was developed to: provide a means of determining financial performance of integrating finishing pigs with natural woodland; identify the likely importance of different as yet largely unresearched animal-tree interactions; and, determine which interactions warrant attention in research and management. Preliminary analysis suggests that the financial performance of this agroforestry enterprise could be superior to that of a pasture-based enterprise. The most important factors in determining incremental performance are identified as sales premia for ‘forest-reared’ pork, changes to feed conversion ratios arising from the provision of a heterogeneous microclimate, and the availability of cheaper land rents.

Integrating natural woodland with pig production in the United Kingdom: an investigation of potential performance and interactions

Although silvopastoral systems involving pigs were once widespread in Britain, the practice has largely died out. However, recent changes in pig production techniques, consumer demands and the economic climate within which farmers operate, have led to renewed interest in both traditional and novel tree-pig systems. This paper describes a financial spreadsheet model ( MAST) that was developed to: provide a means of determining financial performance of integrating finishing pigs with natural woodland; identify the likely importance of different as yet largely unresearched animal-tree interactions; and, determine which interactions warrant attention in research and management. Preliminary analysis suggests that the financial performance of this agroforestry enterprise could be superior to that of a pasture-based enterprise. The most important factors in determining incremental performance are identified as sales premia for 'forest-reared' pork, changes to feed conversion ratios arising from the provision of a heterogeneous microclimate, and the availability of cheaper land rents.

Using historical lesion volume data in the design of a new phase II clinical trial in acute stroke

Background and Purpose-Clinical research into the treatment of acute stroke is complicated, is costly, and has often been unsuccessful. Developments in imaging technology based on computed tomography and magnetic resonance imaging scans offer opportunities for screening experimental therapies during phase II testing so as to deliver only the most promising interventions to phase III. We discuss the design and the appropriate sample size for phase II studies in stroke based on lesion volume. Methods-Determination of the relation between analyses of lesion volumes and of neurologic outcomes is illustrated using data from placebo trial patients from the Virtual International Stroke Trials Archive. The size of an effect on lesion volume that would lead to a clinically relevant treatment effect in terms of a measure, such as modified Rankin score (mRS), is found. The sample size to detect that magnitude of effect on lesion volume is then calculated. Simulation is used to evaluate different criteria for proceeding from phase II to phase III. Results-The odds ratios for mRS correspond roughly to the square root of odds ratios for lesion volume, implying that for equivalent power specifications, sample sizes based on lesion volumes should be about one fourth of those based on mRS. Relaxation of power requirements, appropriate for phase II, lead to further sample size reductions. For example, a phase III trial comparing a novel treatment with placebo with a total sample size of 1518 patients might be motivated from a phase II trial of 126 patients comparing the same 2 treatment arms. Discussion-Definitive phase III trials in stroke should aim to demonstrate significant effects of treatment on clinical outcomes. However, more direct outcomes such as lesion volume can be useful in phase II for determining whether such phase III trials should be undertaken in the first place. (Stroke. 2009;40:1347-1352.)

Integrated optics for nulling interferometry in the thermal infrared

Modal filtering is based on the capability of single-mode waveguides to transmit only one complex amplitude function to eliminate virtually any perturbation of the interfering wavefronts, thus making very high rejection ratios possible in a nulling interferometer. In the present paper we focus on the progress of Integrated Optics in the thermal infrared [6-20 mu m] range, one of the two candidate technologies for the fabrication of Modal Filters, together with fiber optics. In conclusion of the European Space Agency's (ESA) "Integrated Optics for Darwin" activity, etched layers of clialcogenide material deposited on chalcogenide glass substrates was selected among four candidates as the technology with the best potential to simultaneously meet the filtering efficiency, absolute and spectral transmission, and beam coupling requirements. ESA's new "Integrated Optics" activity started at mid-2007 with the purpose of improving the technology until compliant prototypes can be manufactured and validated, expectedly by the end of 2009. The present paper aims at introducing the project and the components requirements and functions. The selected materials and preliminary designs, as well as the experimental validation logic and test benches are presented. More details are provided on the progress of the main technology: vacuum deposition in the co-evaporation mode and subsequent etching of chalcogenide layers. In addition., preliminary investigations of an alternative technology based on burying a chalcogenide optical fiber core into a chalcogenide substrate are presented. Specific developments of anti-reflective solutions designed for the mitigation of Fresnel losses at the input and output surface of the components are also introduced.

A multi-agent system for pervasive healthcare

Wireless technology based pervasive healthcare has been proposed in many applications such as disease management and accident prevention for cost saving and promoting citizen’s wellbeing. However, the emphasis so far is on the artefacts with limited attentions to guiding the development of an effective and efficient solution for pervasive healthcare. Therefore, this paper aims to propose a framework of multi-agent systems design for pervasive healthcare by adopting the concept of pervasive informatics and using the methods of organisational semiotics. The proposed multi-agent system for pervasive healthcare utilises sensory information to support healthcare professionals for providing appropriate care. The key contributions contain theoretical aspect and practical aspect. In theory, this paper articulates the information interactions between the pervasive healthcare environment and stakeholders by using the methods of organisational semiotics; in practice, the proposed framework improves the healthcare quality by providing appropriate medical attentions when and as needed. In this paper, both systems and functional architecture of the multi-agent system are elaborated with the use of wireless technologies such as RFID and wireless sensor networks. The future study will focus on the implementation of the proposed framework.

Aprendizagem e desenvolvimento organizacional : uma experiência com o modelo da quinta disciplina

A complexidade e pressão que o contexto atual de mudança tem gerado para as organizações, tem exigido delas habilidades diferentes daquelas privilegiadas na era das organizações mecanicistas. A aprendizagem tornou-se uma das habilidades-chave para sobrevivência e desenvolvimento das organizações modernas. Alguns modelos gerenciais apresentam-se visando melhorar as capacidades de aprendizagem das organizações. Alguns tratam da questão estrutural, outros da questão comportamental. Um desses vem recebendo interesse especial, pela sua ênfase no elemento humano nas organizações: o modelo da Quinta Disciplina, de Peter M. Senge e seus colegas do M.I.T. - Massachussets Institute of Technology. Por ter como pressuposto que as organizações são em essência produto do pensar e interagir dos seus membros, sugere que a sua transformação passa por mudanças fundamentais nas formas como as pessoas pensam e interagem. Todavia, observa-se que a prática educacional e experiencial do modelo não tem levado em consideração alguns dos seus aspectos fundamentais. Desta forma, este estudo exploratório pretende descrever e avaliar as reações à aplicação do modelo numa realidade organizacional como forma de obter insights úteis para a prática e pesquisa em organizações, uma vez levando em consideração estes aspectos fundamentais. Como resultado, este trabalho descreve e analisa a experiência à luz das cinco disciplinas, unidades básicas do modelo, dando ênfase especial ao pensamento sistêmico, e descreve e analisa a experiência à luz de algumas variáveis, processos e dimensões-chave do estudo das organizações que apresentaram-se relevantes dentro do trabalho.

Parques e incubadoras de empresas de base tecnológica

The main purpose of this paper is to give a wide vision about science parks, technology parks, incubators and technology based firms and to show the Brazilian experience on these subjects. This kind of enterprises is considered one of the most important local and regional development instruments in the present. They demand actions to strengthen the links between firms, R&D centers, universities and governments, especially, local governments. Furthermore, the venture capital firms have an important role to play in these new approach to further the regional and local development through technological innovations. This paper emphasizes the importance of the venture capital and the strategic alliances to support this new approaches and shows that the lack of these instruments in Brazilian environment is one of the main problem of these technology based enterprises.

Gestão de transferência de inovações tecnológicas para empresas do setor produtivo: complexidade no relacionamento entre organizações de culturas diferentes

The motivation of this study is based on the expectation of understanding, at least in part, the reason why the brazilian academic production ¿ which is among the largest if compared to the developing countries, has not been translated in a useful way into concrete technology transference for the production sector. The supposition that different cultures and subcultures, in terms of values, behavior, practices among organizations and groups of selected actors involved in that process,- which is the central problem of this study, and peculiar to the technology context, has elected that relationship process the object of this research this study theoretical fundaments rely on culture and technology to analyze the subcultures which manifest themselves through the typified groups of researchers, in the public organizations, small scale employers, acting on technology based companies in the private sector (ebts) and mediators. Who also act in the process the preliminary step was the case study. Several qualitative methods an procedures were used. And the investigation has advanced toward interacting interviews, at the end added by the focal group method. The conclusions reject the existence of incompatibility among the subject groups points of view, however, points out some divergent values, the presence of mutual stereotypes and also confirms the supposition that the research platform is strongly influenced by the financial factor. Although, the study reveals that the presence of common objectives which lay behind the cited divergences make possible to present a core of practical suggestions to implement the studied relationships for the benefit of the production sector as well. The peculiarities perceived while dealing with that singular context suggest futures research to clarify possible new and obscure areas in that complex relationships.

A influência dos ativos intangíveis na análise de risco de crédito de empresas de base tecnológica

Evolution is present in world dynamics. And it is just in such transformational environment where companies have been encapsulated. In an economy of knowledge, physical assets alone are unable to provide profits to meet shareholders' demands. Now there comes an invisible component with the purpose of defining strategies and impelling results: Intangible Assets. Banking financing systems, however, have not kept pace with this knowledge revolution and its resulting new income generation techniques. Credit analysis methods for most financing agents would not employ any intangible parameters in their methodology of study as yet. This paper seeks to discuss the importance of intangible assets by focusing their role of influencial factor in decisions to finance technology-based companies. By studying the credit risk classification system employed by FINEP, Brazil's Federal Agency for innovation development, we wished to suggest indicators for intangibles which might be put to use in the Financiadora.

O papel da confiança na coprodução

Esse trabalho investigou empiricamente a influência que a confiança que o cliente deposita no prestador de serviços exerce sobre a efetividade da coprodução do cliente em serviços intensivos em conhecimento baseados em tecnologia. Para tanto, foi realizada uma revisão da literatura de marketing de serviços e de gerenciamento de operações sobre a participação do cliente na produção e entrega de serviços, que é o que caracteriza genericamente a coprodução do cliente. Também foi revisada a literatura sobre serviços intensivos em conhecimento, em busca de entender suas características e especificidades, e sobre confiança, especialmente na área de marketing de relacionamento. Sobre a participação do cliente na produção e entrega de serviços, constatou-se que existe na literatura uma visão consagrada que trata o cliente como “funcionário parcial” da empresa durante os encontros de serviços. Essa visão propõe recorrentemente um modelo conceitual em que a efetividade da coprodução do cliente apresenta três antecedentes fundamentais: clareza de papel, motivação e expertise do cliente. Além disso, foi identificada uma proposição teórica especificamente para o setor de serviços intensivos em conhecimento, nunca testada empiricamente, que sugere que esses três antecedentes da efetividade da coprodução são influenciados por um conjunto de comportamentos colaborativos desejáveis, batizados de responsabilidades do papel do cliente. Dessa forma, este trabalho testou um modelo conceitual que estabeleceu a confiança e as responsabilidades do papel do cliente como antecedentes da clareza de papel, motivação e expertise do cliente no processo de coprodução do cliente. Foi utilizada uma abordagem quantitativa e os dados foram levantados junto a profissionais que já participaram de projetos de software na condição de clientes. A coleta de dados usou um questionário estruturado construído a partir de escalas de mensuração de estudos anteriores. As relações entre os conceitos foram testadas por meio da técnica de modelagem de equações estruturais. Os resultados obtidos apresentaram evidências de que a confiança e as responsabilidades do papel do cliente impactam positivamente a clareza de papel, a motivação ou a expertise do cliente, abrindo espaço para pesquisas futuras que aprofundem o entendimento das relações entre esses conceitos e sua importância para a efetividade da coprodução do cliente.

Lean startup: análise exploratória sobre sua utilização por novas empresas brasileiras

Recentemente diversos empreendedores passaram a empregar uma nova abordagem na criação de empresas, denominada “Lean Startup” que, começou a ser difundida no Brasil em 2012 com o livro de Eric Ries. Seguindo a perspectiva do empreendedorismo como método, ela representa uma ruptura nos estudos de empreendedorismo, pois é diferente da abordagem preditiva utilizada até então em que elabora-se um plano de negócios e, somente depois da busca de investimentos, o produto é testado com clientes. Embora muito utilizada, existem poucos estudos acadêmicos sobre as práticas Lean aplicadas a Startups, daí a relevância do presente estudo. Com caráter exploratório, a pesquisa utiliza uma metodologia quantitativa e se vale de uma survey, respondida por 115 empreendedores, sócios de empresas de base tecnológica com até 42 meses de existência, com o objetivo de descobrir se eles conhecem a Lean Startup, o quanto suas ferramentas são adotadas e se elas trazem efeitos positivos. Como resultado, constatou-se que a Lean Startup é amplamente conhecida e utilizada, foram encontradas sinalizações de resultados positivos obtidos pelo uso de algumas de suas ferramentas - feedback acelerado, produto mínimo viável (PMV) e métricas da contabilidade para inovação, que medem o aprendizado no lugar de lucro. Dessa forma, a pesquisa contribui com o aumento do conhecimento sobre a Lean Startup, bem como por meio da formulação de perguntas para direcionar estudo futuros.

Modelo institucional do processo de estruturação de empresas de desenvolvimento de software: um estudo de múltiplos casos

Some authors have shown the need of understanding the technological structuring process in contemporary firms. From this perspective, the software industry is a very important element because it provides products and services directly to many organizations from many fields. In this case, the Brazilian software industry has some peculiarities that distinguish it from other industries located in developed countries, which makes its understanding even more relevant. There is evidence that local firms take different strategies and structural configurations to enter into a market naturally dominated by large multinational firms. Therefore, this study aims to understand not only the structural configurations assumed by domestic firms but also the dynamic and the process that lead to these different configurations. To do so, this PhD dissertation investigates the institutional environment, its entities and the isomorphic movements, by employing an exploratory, descriptive and explanatory multiple cases study. Eight software development companies from the Recife's information technology Cluster were visited. Also, a form was applied and an interview with one of the main firm s professional was conducted. Although the study is predominantly qualitative, part of the data was analyzed through charts and graphs, providing a companies and environment overview that was very useful to analysis done through the interviews interpretation. As a result, it was realized that companies are structured around hybrids business models from two ideal types of software development companies, which are: software factory and technology-based company. Regarding the development process, it was found that there is a balanced distribution between the traditional and agile development paradigm. Among the traditional methodologies, the Rational Unified Process (RUP) is predominant. The Scrum is the most used methodology among the organizations based on the Agile Manifesto's principles. Regarding the structuring process, each institutional entity acts in such way that generates different isomorphic pressure. Emphasis was given to entities such as customers, research agencies, clusters, market-leading businesses, public universities, incubators, software industry organizations, technology vendors, development tool suppliers and manager s school and background because they relate themselves in a close way with the software firms. About this relationship, a dual and bilateral influence was found. Finally, the structuring level of the organizational field has been also identified as low, which gives a chance to organizational actors of acting independently

Otimização de vazão de poços injetores em projeto de injeção de água utilizando simulação por linhas de fluxo

Until the early 90s, the simulation of fluid flow in oil reservoir basically used the numerical technique of finite differences. Since then, there was a big development in simulation technology based on streamlines, so that nowadays it is being used in several cases and it can represent the physical mechanisms that influence the fluid flow, such as compressibility, capillarity and gravitational segregation. Streamline-based flow simulation is a tool that can help enough in waterflood project management, because it provides important information not available through traditional simulation of finite differences and shows, in a direct way, the influence between injector well and producer well. This work presents the application of a methodology published in literature for optimizing water injection projects in modeling of a Brazilian Potiguar Basin reservoir that has a large number of wells. This methodology considers changes of injection well rates over time, based on information available through streamline simulation. This methodology reduces injection rates in wells of lower efficiency and increases injection rates in more efficient wells. In the proposed model, the methodology was effective. The optimized alternatives presented higher oil recovery associated with a lower water injection volume. This shows better efficiency and, consequently, reduction in costs. Considering the wide use of the water injection in oil fields, the positive outcome of the modeling is important, because it shows a case study of increasing of oil recovery achieved simply through better distribution of water injection rates

Análise de desempenho de sistemas de comunicação sem-fio para monitoramento de unidade de produção de poços petrolíferos terrestres

The greater part of monitoring onshore Oil and Gas environment currently are based on wireless solutions. However, these solutions have a technological configuration that are out-of-date, mainly because analog radios and inefficient communication topologies are used. On the other hand, solutions based in digital radios can provide more efficient solutions related to energy consumption, security and fault tolerance. Thus, this paper evaluated if the Wireless Sensor Network, communication technology based on digital radios, are adequate to monitoring Oil and Gas onshore wells. Percent of packets transmitted with successful, energy consumption, communication delay and routing techniques applied to a mesh topology will be used as metrics to validate the proposal in the different routing techniques through network simulation tool NS-2