EBSD study of the orientation dependence of substructure characteristics in a model Fe-30wt%Ni alloy subjected to hot deformation

The aim of the present investigation was to determine the orientation dependence of substructure characteristics in an austenitic Fe−30wt%Ni model alloy subjected to hot plane strain compression. Deformation was carried out at a temperature of 950 °C using a strain rate of 10 s^₋₁ to equivalent strain levels of approximately 0.2, 0.4, 0.6 and 0.8. The specimens obtained were analysed using a fully automatic electron backscatter diffraction technique. The crystallographic texture was characterized for all the strain levels studied and the subgrain structure was quantified in detail at a strain of 0.4. The substructure characteristics displayed pronounced orientation dependence. The major texture components, namely the copper, S, brass, Goss and rotated Goss, generally contained one or two prominent families of parallel larger-angle extended subboundaries, the traces of which on the longitudinal viewing plane appeared systematically aligned along the {111} slip plane traces, bounding long microbands subdivided into slightly elongated subgrains by short lower-angle transverse subboundaries. Relatively rare cube-orientated grains displayed pronounced subdivision into coarse deformation bands containing large, low-misorientated subgrains. The misorientation vectors across subboundaries largely showed a tendency to cluster around the sample transverse direction. Apart from the rotated Goss texture component, the stored energy levels for the remaining components were principally consistent with the corresponding Taylor factor values.

Individual differences in affective responses to violence and sexual violence

The thesis aimed to identify and compare individual differences in anger related affective responses upon exposure to neutral, violent and sexually violent film. The findings revealed that both graphic and non-graphic sexually violent film content may have a stronger impact on viewers' anger levels than exposure to standard violent film. The portfolio examined in four case studies the utility of the Violence Risk Scale when seeking to identify factors associated with risk of violent recidivism and subsequent treatment targets for intellectually disabled offenders . Treatment indications must consider the impaired cognitive and adaptive abilities and the difficulties inherent in modifying the behavioural characteristics of intellectually disabled offenders.

Microstructure and properties of a C-Mn steel subjected to heavy plastic deformation

In the present paper an effect of severe plastic deformation (SPD) on the microstructural evolution and properties of a plain C-Mn steel was investigated. The SPD was accomplished by the MaxStrain system which deforms material along two perpendicular axes while the deformation along the third axis is fully constrained. The applied amounts of true strains were 5 and 20 in total. Deformation was conducted at room and 500°C temperatures. Some samples deformed at room temperature were subsequently annealed at 500°C. A microstructural analysis by SEM/EBSD was used for recognition the low- and high-angle grain boundaries. It was found that the collective effect of severe plastic deformation (true strain of 20) and further annealing promotes the formation of high-angle grain boundaries and uniform fine grained microstructure. The refinement of ferrite microstructure results in a significant increase in strength and hardness.

Cross-sectional geometry of weight-bearing tibia in female athletes subjected to different exercise loadings

Summary The association of long-termsport-specific exercise loading with cross-sectional geometry of the weight-bearing tibia was evaluated among 204 female athletes representing five different exercise loadings and 50 referents. All exercises involving ground impacts (e.g., endurance running, ball games, jumping) were associated with thicker cortex at the distal and diaphyseal sites of the tibia and also with large diaphyseal cross-section, whereas the high-magnitude (powerlifting) and non-impact (swimming) exercises were not. Introduction Bones adapt to the specific loading to which they are habitually subjected. In this cross-sectional study, the association of long-term sport-specific exercise loading with the geometry of the weight-bearing tibia was evaluated among premenopausal female athletes representing 11 different sports.

Methods A total of 204 athletes were divided into five exercise loading groups, and the respective peripheral quantitative computed tomographic data were compared to data obtained from 50 physically active, non-athletic referents. Analysis of covariance was used to estimate the between-group differences.

Results At the distal tibia, the high-impact, odd-impact, and repetitive low-impact exercise loading groups had ~30% to 50% (p<0.05) greater cortical area (CoA) than the referents. At the tibial shaft, these three impact groups had ~15% to 20% (p<0.05) greater total area (ToA) and ~15% to 30% (p<0.05) greater CoA. By contrast, both the high-magnitude and repetitive non-impact groups had similar ToA and CoA values to the reference group at both tibial sites.

Conclusions High-impact, odd-impact, and repetitive lowimpact exercise loadings were associated with thicker cortex at the distal tibia. At the tibial shaft, impact loading was not only associated with thicker cortex, but also a larger cross-sectional area. High-magnitude exercise loading did not show such associations at either site but was comparable to repetitive non-impact loading and reference data. Collectively, the relevance of high strain rate together with moderate-to-high strain magnitude as major determinants of osteogenic loading of the weight-bearing tibia is implicated.

Double-layer and hydration forces measured between silica sheets subjected to various surface treatments

Force measurements between silica surfaces in aqueous solutions of NaCl are reported. Silica is prepared with one of three surface treatments: (i) flaming, (ii) exposure to steam for 150 h, and (iii) brief exposure to ammonia vapor. Analysis of electrical double-layer interactions indicates that the surface density of silanol groups increases with steam treatment, and that exposure to ammonia etches the surface slightly and renders it porous. The force at short range is dominated by a strong repulsion which is attributed to hydration of the surface. The hydration component of the force is not significantly affected by the surface treatments, nor by electrolyte concentration over the range investigated (up to 0.1 M).

Texture evolution and softening processes in an austenitic Ni-30Fe alloy subjected to hot deformation and subsequent annealing

The current work has investigated the texture development in an austenitic Ni-30Fe model alloy during deformation within the dynamic recrystallization (DRX) regime and after post-deformation annealing. Both the deformed matrix and DRX texture displayed the expected FCC shear components, the latter being dominated by the low Taylor factor grains, which was presumably caused by their lower consumption rate during DRX. The deformed matrix grains were largely characterized by organized, microband structures, while the DRX grains showed more random, complex subgrains/cell arrangements. The latter substructure type proved to be significantly less stable during post-deformation annealing. The recrystallization of the deformed matrix occurred through nucleation and growth of new grains fully replacing the deformed structure, as expected for the classical static recrystallization (SRX). Unlike the DRX grains, the SRX texture was essentially random. By contrast, a novel softening mechanism was revealed during annealing of the fully DRX microstructure. The initial post-dynamic softening stage involved rapid growth of the dynamically formed nuclei and migration of the mobile boundaries in line with the well-established metadynamic recrystallization (MDRX) mechanism, which weakened the starting DRX texture. However, in parallel, the sub-boundaries within the deformed DRX grains progressively disintegrated through dislocation climb and dislocation annihilation, which ultimately led to the formation of dislocation-free grains. Consequently, the weakened DRX texture largely remained preserved throughout the annealing process.

Physiological stress responses in the warm-water fish matrinxã (Brycon amazonicus) subjected to a sudden cold shock

The present work evaluated several aspects of the generalized stress response [endocrine (cortisol), metabolic (glucose), hematologic (hematocrit and hemoglobin) and cellular (HSP70)] in the Amazonian warm-water fish matrinxã (Brycon amazonicus ) subjected to an acute cold shock. This species farming has been done in South America, and growth and feed conversion rates have been interesting. However, in subtropical areas of Brazil, where the water temperature can rapidly change, high rates of matrinxã mortality have been associated with abrupt decrease in the water temperature. Thus, we subjected matrinxã to a sudden cold shock by transferring the fish directly to tanks in which the water temperature was 10oC below the initial conditions (cold shock from 28ºC to 18oC). After 1h the fish were returned to the original tanks (28ºC). The handling associated with tank transfer was also imposed on control groups (not exposed to cold shock). While exposure to cold shock did not alter the measured physiological conditions within 1h, fish returned to the ambient condition (water at 28º C) significantly increased plasma cortisol and glucose levels. Exposure to cold shock and return to the warm water did not affect HSP70 levels. The increased plasma cortisol and glucose levels after returning the fish to warm water suggest that matrinxã requires cortisol and glucose for adaptation to increased temperature.

Lack of glucose and hsp70 responses in haddock Melanogrammus aeglefinus (L.) subjected to handling and heat shock

Juvenile haddock Melanogrammus aeglefinus (c. 39 g) were exposed to either a handling stressor (1 min out of water) or heat shock (increase from 10 to 15° C for 1 h), and plasma cortisol, plasma glucose and gill hsp70 levels were determined before, and at 1, 3, 6, 12, 24 and 48 h post-stress. The pattern of cortisol increase was similar following both stressors, with levels increasing by 25-fold at 1 h post-stress, but returning to pre-stress levels (2–5 ng ml⁻¹) by 3 h. In contrast, neither handling nor heat shock caused an increase in plasma glucose levels. Although gill hsp70 was detected, presumably constitutive levels, in both control and heat shocked groups, there were not significant changes in gill hsp70 levels after exposure to heat shock. The lack of glucose and hsp70 responses to these typical stressors is consistent with previous studies on Atlantic cod Gadus morhua, and suggests that the stress physiology of Gadidae differs from the ‘typical’ teleost.

The violence of gender : Australian policy responses to violence

This thesis engages in critical policy analysis to examine the ways in which violence is problematised in social policy. The extent to which (policy) constructions of violence reflect and reinforce gender(ed) discourses, as manifest in the naming of some violence(s) as ‘problem violences’ and not others, represents a key finding of this thesis.

Effects of clove oil on the stress response of matrinxã (Brycon cephalus) subjected to transport

Fish transport is one of the most stressful procedures in aquaculture facilities. The present work evaluated the stress response of matrinxã to transportation procedures, and the use of clove oil as an alternative to reduce the stress response to transport in matrinxã (Brycon cephalus). Clove oil solutions were tested in concentrations of 0, 1, 5 and 10 mg/L during matrinxã transportation in plastic bags, supplied with water and oxygen as the usual field procedures in Brazil. Clove oil reduced some of the physiological stress responses (plasma cortisol, glucose and ions) that we measured. The high energetic cost to matrinxã cope with the transport stress was clear by the decrease of liver glycogen after transport. Our results suggest that clove oil (5 mg/l) can mitigate the stress response in matrinxã subjected to transport.

Vibration based damage identification of a scale-model steel frame structure subjected to bolt connection failures

Large-span steel frame structures prove to be an ideal choice for their speed of construction, relatively low cost, strength, durability and structural design flexibility. For this type of structure, the beam-column connections are critical for its structural integrity and overall stability. This is because a steel frame generally fails first at its connectors, due to the change in stress redistribution with adjacent members and material related failures, caused by various factors such as fire, seismic activity or material deterioration. Since particular attention is required at a steel frame’s connection points, this study explores the applicability of a comprehensive structural health monitoring (SHM) method to identify early damage and prolong the lifespan of connection points of steel frames. An impact hammer test was performed on a scale-model steel frame structure, recording its dynamic response to the hammer strike via an accelerometer. The testing procedure included an intact scenario and two damage scenarios by unfastening four bolt connections in an accumulating order. Based entirely on time-domain experimental data for its calibration, an Auto Regressive Average Exogenous (ARMAX) model is used to create a simple and accurate model for vibration simulation. The calibrated ARMAX model is then used to identify various bolt-connection related damage scenarios via R² value. The findings in this study suggest that the proposed time-domain approach is capable of identifying structural damage in a parsimonious manner and can be used as a quick or initial solution.