Vector density and the control of kala-azar in Bihar, India

Bihar, India has been in the grip of kala-azar for many years. Its rampant and severe spread has made life miserable in most parts of the state. Such conditions require a comprehensive understanding of this affliction. The numbers coming out of the districts prone to the disease in the north and south Ganges have provided us with several startling revelations, as there are striking uniformities on both sides, including similar vegetation, water storage facilities, house construction and little change in risk factors. The northern areas have been regularly sprayed with DDT since 1977, but eradication of the disease appears to be a distant dream. In 2007 alone, there were as many as 37,738 cases in that region. In contrast, the southern districts of Patna and Nalanda have never had the disease in its epidemic form and endemic disease has been present in only some pockets of the two districts. In those cases, two rounds of spraying with DDT had very positive results, with successful control and no new established foci. In addition, an eleven-year longitudinal study of the man hour density and house index for the vector Phlebotomus argentipes demonstrated that they were quite high in Patna and Nalanda and quite low in north Bihar. Given these facts, an attempt has been made to unravel the role of P. argentipes saliva (salivary gland) in the epidemiology of kala-azar. It was determined that patchy DDT spraying should be avoided for effective control of kala-azar.

Sustainability of vector control strategies in the Gran Chaco Region: current challenges and possible approaches

Sustainability has become a focal point of the international agenda. At the heart of its range of distribution in the Gran Chaco Region, the elimination of Triatoma infestans has failed, even in areas subject to intensive professional vector control efforts. Chagas disease control programs traditionally have been composed of two divorced entities: a vector control program in charge of routine field operations (bug detection and insecticide spraying) and a disease control program in charge of screening blood donors, diagnosis, etiologic treatment and providing medical care to chronic patients. The challenge of sustainable suppression of bug infestation and Trypanosoma cruzi transmission can be met through integrated disease management, in which vector control is combined with active case detection and treatment to increase impact, cost-effectiveness and public acceptance in resource-limited settings. Multi-stakeholder involvement may add sustainability and resilience to the surveillance system. Chagas vector control and disease management must remain a regional effort within the frame of sustainable development rather than being viewed exclusively as a matter of health pertinent to the health sector. Sustained and continuous coordination between governments, agencies, control programs, academia and the affected communities is critical.

Susceptibility of Triatoma brasiliensis from state of Ceará, Northeastern Brazil, to the pyrethroid deltamethrin

After controlling Triatoma infestans in Brazil, other species of triatomine that were considered minor in the transmission of Chagas disease became important. The persistence of Triatoma brasiliensis in Northeastern Brazil, associated with reinfection of domestic environments recently sprayed with pyrethroids, may be a signal of susceptibility alteration of this species to this insecticide. Specimens of T. brasiliensis from the municipality of Tauá, state of Ceará, were captured before and one year after spraying. They were submitted to bioassays using deltamethrin. The LD50 ranged from 0.19-0.33 ng of deltamethrin/nymph. The resistance ratio among samples from Tauá varied from 1.16-1.79 in the samples captured before the spraying and 1.00-1.74 in the samples captured one year after spraying, demonstrating that the two populations were equally susceptible to deltamethrin. The small difference in susceptibility between the two captures suggests that T. brasiliensis obtained in the second capture are from new invasions of the domestic environment and that the insecticide did not select resistant individuals. Therefore, it is suggested that T. brasiliensis control be carried out supplementing the regular use of pyrethroids with complementary measures, such as improvement of the dwellings and health education.

Vector control intervention towards interruption of transmission of Chagas disease by Rhodnius prolixus, main vector in Guatemala

In Guatemala, the Ministry of Health (MoH) began a vector control project with Japanese cooperation in 2000 to reduce the risk of Chagas disease infection. Rhodnius prolixus is one of the principal vectors and is targeted for elimination. The control method consisted of extensive residual insecticide spraying campaigns, followed by community-based surveillance with selective respraying. Interventions in nine endemic departments identified 317 villages with R. prolixus of 4,417 villages surveyed. Two cycles of residual insecticide spraying covered over 98% of the houses in the identified villages. Fourteen villages reinfestated were all resprayed. Between 2000-2003 and 2008, the number of infested villages decreased from 317 to two and the house infestation rate reduced from 0.86% to 0.0036%. Seroprevalence rates in 2004-2005, when compared with an earlier study in 1998, showed a significant decline from 5.3% to 1.3% among schoolchildren in endemic areas. The total operational cost was US$ 921,815, where the cost ratio between preparatory, attack and surveillance phases was approximately 2:12:1. In 2008, Guatemala was certified for interruption of Chagas disease transmission by R. prolixus. What facilitated the process was existing knowledge in vector control and notable commitment by the MoH, as well as political, managerial and technical support by external stakeholders.

New trends in the kitchen: propellants assessment of edible food aerosol sprays used on food.

New products available for food creations include a wide variety of "supposed" food grade aerosol sprays. However, the gas propellants used cannot be considered as safe. The different legislations available did not rule any maximum residue limits, even though these compounds have some limits when used for other food purposes. This study shows a preliminary monitoring of propane, butane and dimethyl ether residues, in cakes and chocolate after spraying, when these gases are used as propellants in food aerosol sprays. Release kinetics of propane, butane and dimethyl ether were measured over one day with sprayed food, left at room temperature or in the fridge after spraying. The alkanes and dimethyl ether analyses were performed by headspace-gas chromatography-mass spectrometry/thermal conductivity detection, using monodeuterated propane and butane generated in situ as internal standards. According to the obtained results and regardingthe extrapolations of the maximum residue limits existing for these substances, different delays should be respected according to the storage conditions and the gas propellant to consume safely the sprayed food.

Where do these bugs come from? Phenotypic structure ofTriatoma infestans populations after control interventions in the Argentine Chaco

House re-invasion by native triatomines after insecticide-based control campaigns represents a major threat for Chagas disease vector control. We conducted a longitudinal intervention study in a rural section (Area III, 407 houses) of Pampa del Indio, northeastern Argentina, and used wing geometric morphometry to compare pre-spray and post-spray (re-infestant bugs) Triatoma infestanspopulations. The community-wide spraying with pyrethroids reduced the prevalence of house infestation by T. infestans from 31.9% to < 1% during a four-year follow-up, unlike our previous studies in the neighbouring Area I. Two groups of bug collection sites differing in wing shape variables before interventions (including 221 adults from 11 domiciles) were used as a reference for assigning 44 post-spray adults. Wing shape variables from post-spray, high-density bug colonies and pre-spray groups were significantly different, suggesting that re-infestant insects had an external origin. Insects from one house differed strongly in wing shape variables from all other specimens. A further comparison between insects from both areas supported the existence of independent re-infestation processes within the same district. These results point to local heterogeneities in house re-infestation dynamics and emphasise the need to expand the geographic coverage of vector surveillance and control operations to the affected region.

Artrópodos associados à copa de Attalea phalerata Mart. (Arecaceae), na região do Pantanal de Poconé, Mato Grosso, Brasil

Six individuals of the palm A. phalerata, in Poconé floodplains of Mato Grosso, were sprayed with a synthetic pyrethroid (0.25% concentration) in order to study the biomass, diversity, and richness of the canopy arthropods. A total of 17,188 (238.7±80.6 ind./m²) arthropods belonging to 22 Orders, was collected in a 72 m² funnel area. Two hours after spraying, 58.9% of the total number fell into the funnels, 37.6% was obtained by shaking the trees, and finally, 3.5% after cutting and washing all the palm leaves. The Coleoptera (27.4%), Hymenoptera-Formicidae (19.0%), Collembola (13.6%), Psocoptera (10.7%), Diptera (9.0%) and Araneae (6.4%) were the predominant. The total biomass was 15.1 g dry weight (0.4mg/m²; 0.13+0.04/tree). A total of 4,715 beetles representing 48 families and 326 morphospecies were obtained. Tenebrionidae (22.9%), Curculionidae (22.0%), Carabidae (10.9%) and Staphylinidae (7.9%) were the most abundant, while Curculionidae (44 spp.), Staphylinidae (40 spp.) and Chrysomelidae (34 spp.) presented the largest number of morphospecies. Herbivores (37.5%) were the dominant in the trophic guilds of adult Coleoptera, followed by predators (35.4%), fungivores (14.6%), and saprophages (12.5%). Although most arthropod Orders were represented in all the palms sampled, analysis of variance showed no significant differences in their composition, however there was a significant difference in their frequency of occurrence.

Terrestrial arthropods from tree canopies in the Pantanal of Mato Grosso, Brazil

Terrestrial arthropods from tree canopies in the Pantanal of Mato Grosso, Brazil. This study represents a contribution to the knowledge of the diversity of arthropods associated to the canopy of Vochysia divergens Pohl (Vochysiaceae). Three trees individuals were sampled during two seasonal periods in this region: a) by spraying one tree canopy during high water (February); b) by fogging two tree canopies during low water (September/October). The 15,744 arthropods (183.2±38.9 individuals/m²) obtained from all three trees (86 m²) represented 20 taxonomic orders, 87.1% were Insecta, and 12.9% Arachnida. The dominant groups were Hymenoptera (48.5%; 88.9 individuals/m²), mostly Formicidae (44.5%; 81.4 individuals/m²), followed by Coleoptera (14.0%; 25.5 individuals/m²) and Araneae (10.2%; 19.5 individuals/m²), together representing 62.5% of the total catch. Fourteen (70%) of all orders occurred on three trees. Dermaptera, Isoptera, Neuroptera, Odonata, Plecoptera and Trichoptera were collected from only one tree. Of the total, 2,197 adult Coleoptera collected (25.5±11.3 individuals/m²), 99% were assigned to 32 families and 256 morphospecies. Nitidulidae (17.9% of the total catch; 4.6 individuals/m²), Anobiidae (16.7%; 4.3 individuals/m²), Curculionidae (13.2%; 3.4 individuals/m²) and Meloidae (11.4%; 2.9 individuals/m²) dominated. The communitiy of adult Coleoptera on V. divergens indicated a dominance of herbivores (37.8% of the total catch, 127 spp.) and predators (35.2%, 82 spp.), followed by saprophages (16.2%, 32 spp.) and fungivores (10.8%, 15 spp.). The influence of the flood pulse on the community of arboreal arthropods in V. divergens is indicated by the seasonal variation in evaluated groups, causing changes in their structure and composition.

Bioactivity of Indonesian mahogany, Toona sureni (Blume) (Meliaceae), against the red flour beetle, Tribolium castaneum (Coleoptera, Tenebrionidae)

Bioactivity of Indonesian mahogany, Toona sureni (Blume) (Meliaceae), against the red flour beetle, Tribolium castaneum (Coleoptera, Tenebrionidae). The insecticidal activity of Toona sureni (Blume) Merr. was evaluated considering repellency, mortality and progeny production of F1 adults of Tribolium castaneum (Herbst, 1797) (Coleoptera, Tenebrionidae). Dried extract of seeds of T. sureni was dissolved in acetone to prepare solution of various concentrations (0.5, 1.0, 2.5 and 5.0%). To test for repellency, the insects were exposed to treated filter paper. Mortality of larvae, pupae and adults was evaluated by the treatment of spraying the insects with different concentrations of T. sureni extract. Residual effect of the extract was also evaluated considering the production of progeny of F1 adults. The highest repellency (93.30%) of T. castaneum occurred at the highest concentration (5.0% suspension of T. sureni); while the lowest (0.0%) repellency occurred at 0.5% suspension after 1 day of treatment. The highest mortality against adults (86.71%), larvae (88.32%) and pupae (85%) occurred at 5% suspension at 8 days after application. There was a negative correlation between the concentrations of T. sureni and the production of F1 adult's progeny of T. castaneum. The highest number of progeny (147) of T. castaneum occurred in the control at 7 days after treatment; and the lowest number of progeny (43) occurred at 5.0% concentration in 1 day after treatment. The results show that T. sureni is toxic to T. castaneum and has the potential to control all stages of this insect in stored wheat.

Structural characterization of laser-treated Cr3C2-NiCr coatings

The interconnected porosity of the Cr3C2-NiCr coatings obtained by high-velocity oxy fuel spraying is detrimental in corrosion and wear resistance applications. Laser treatments allow sealing of their surfaces through melting and resolidification of a thin superficial layer. A Nd:YAG laser beam was used to irradiate Cr3C2-NiCr coatings either in the continuous wave mode or at different repetition rates in the pulsed one. Results indicated that high peak and low mean laser irradiances are not good, since samples presented deep grooves and an extensive crack network. At low peak and higher mean laser irradiances the surface was molten, and only a few shallow cracks were observed. The interconnected porosity was completely eliminated in a layer up to 80 m thick, formed by large Cr7C3 grains imbedded in a NiCr matrix.

Timing, location and crop species influence the magnitude of amelioration of aluminum toxicity by magnesium

The protective effect of cations, especially Ca and Mg, against aluminum (Al) rhizotoxicity has been extensively investigated in the last decades. The mechanisms by which the process occurs are however only beginning to be elucidated. Six experiments were carried out here to characterize the protective effect of Mg application in relation to timing, location and crop specificity: Experiment 1 - Protective effect of Mg compared to Ca; Experiment 2 - Protective effect of Mg on distinct root classes of 15 soybean genotypes; Experiment 3 - Effect of timing of Mg supply on the response of soybean cvs. to Al; Experiment 4 - Investigating whether the Mg protective effect is apoplastic or simplastic using a split-root system; Experiment 5 - Protective effect of Mg supplied in solution or foliar spraying, and Experiment 6 - Protective effect of Mg on Al rhizotoxicity in other crops. It was found that the addition of 50 mmol L-1 Mg to solutions containing toxic Al increased Al tolerance in 15 soybean cultivars. This caused soybean cultivars known as Al-sensitive to behave as if they were tolerant. The protective action of Mg seems to require constant Mg supply in the external medium. Supplying Mg up to 6 h after root exposition to Al was sufficient to maintain normal soybean root growth, but root growth was not recovered by Mg addition 12 h after Al treatments. Mg application to half of the root system not exposed to Al was not sufficient to prevent Al toxicity on the other half exposed to Al without Mg in rooting medium, indicating the existence of an external protection mechanism of Mg. Foliar spraying with Mg also failed to decrease Al toxicity, indicating a possible apoplastic role of Mg. The protective effect of Mg appeared to be soybean-specific since Mg supply did not substantially improve root elongation in sorghum, wheat, corn, cotton, rice, or snap bean when grown in the presence of toxic Al concentrations.

Occupational respiratory exposures to irritating and sensitizing volatile compounds deriving from cleaning products

Recent findings suggest an association between exposure to cleaning products and respiratory dysfunctions including asthma. However, little information is available about quantitative airborne exposures of professional cleaners to volatile organic compounds deriving from cleaning products. During the first phases of the study, a systematic review of cleaning products was performed. Safety data sheets were reviewed to assess the most frequently added volatile organic compounds. It was found that professional cleaning products are complex mixtures of different components (compounds in cleaning products: 3.5 ± 2.8), and more than 130 chemical substances listed in the safety data sheets were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%), skin (50%) and by ingestion (60%) were the most reported. Monoethanolamine, a strong irritant and known to be involved in sensitizing mechanisms as well as allergic reactions, is frequently added to cleaning products. Monoethanolamine determination in air has traditionally been difficult and air sampling and analysis methods available were little adapted for personal occupational air concentration assessments. A convenient method was developed with air sampling on impregnated glass fiber filters followed by one step desorption, gas chromatography and nitrogen phosphorous selective detection. An exposure assessment was conducted in the cleaning sector, to determine airborne concentrations of monoethanolamine, glycol ethers, and benzyl alcohol during different cleaning tasks performed by professional cleaning workers in different companies, and to determine background air concentrations of formaldehyde, a known indoor air contaminant. The occupational exposure study was carried out in 12 cleaning companies, and personal air samples were collected for monoethanolamine (n=68), glycol ethers (n=79), benzyl alcohol (n=15) and formaldehyde (n=45). All but ethylene glycol mono-n-butyl ether air concentrations measured were far below (<1/10) of the Swiss eight hours occupational exposure limits, except for butoxypropanol and benzyl alcohol, where no occupational exposure limits were available. Although only detected once, ethylene glycol mono-n-butyl ether air concentrations (n=4) were high (49.5 mg/m3 to 58.7 mg/m3), hovering at the Swiss occupational exposure limit (49 mg/m3). Background air concentrations showed no presence of monoethanolamine, while the glycol ethers were often present, and formaldehyde was universally detected. Exposures were influenced by the amount of monoethanolamine in the cleaning product, cross ventilation and spraying. The collected data was used to test an already existing exposure modeling tool during the last phases of the study. The exposure estimation of the so called Bayesian tool converged with the measured range of exposure the more air concentrations of measured exposure were added. This was best described by an inverse 2nd order equation. The results suggest that the Bayesian tool is not adapted to predict low exposures. The Bayesian tool should be tested also with other datasets describing higher exposures. Low exposures to different chemical sensitizers and irritants should be further investigated to better understand the development of respiratory disorders in cleaning workers. Prevention measures should especially focus on incorrect use of cleaning products, to avoid high air concentrations at the exposure limits. - De récentes études montrent l'existence d'un lien entre l'exposition aux produits de nettoyages et les maladies respiratoires telles que l'asthme. En revanche, encore peu d'informations sont disponibles concernant la quantité d'exposition des professionnels du secteur du nettoyage aux composants organiques volatiles provenant des produits qu'ils utilisent. Pendant la première phase de cette étude, un recueil systématique des produits professionnels utilisés dans le secteur du nettoyage a été effectué. Les fiches de données de sécurité de ces produits ont ensuite été analysées, afin de répertorier les composés organiques volatiles les plus souvent utilisés. Il a été mis en évidence que les produits de nettoyage professionnels sont des mélanges complexes de composants chimiques (composants chimiques dans les produits de nettoyage : 3.5 ± 2.8). Ainsi, plus de 130 substances listées dans les fiches de données de sécurité ont été retrouvées dans les 105 produits répertoriés. Les principales classes de substances chimiques identifiées étaient les parfums, les éthers de glycol, les agents de surface et les solvants; dans une moindre mesure, les phosphates, les sels, les détergents, les régulateurs de pH, les acides et les bases ont été identifiés. Plus de 75% des produits répertoriés contenaient des substances décrites comme irritantes (Xi), 64% nuisibles (Xn) et 28% corrosives (C). Les risques pour les yeux (59%), la peau (50%) et par ingestion (60%) était les plus mentionnés. La monoéthanolamine, un fort irritant connu pour être impliqué dans les mécanismes de sensibilisation tels que les réactions allergiques, est fréquemment ajouté aux produits de nettoyage. L'analyse de la monoéthanolamine dans l'air a été habituellement difficile et les échantillons d'air ainsi que les méthodes d'analyse déjà disponibles étaient peu adaptées à l'évaluation de la concentration individuelle d'air aux postes de travail. Une nouvelle méthode plus efficace a donc été développée en captant les échantillons d'air sur des filtres de fibre de verre imprégnés, suivi par une étape de désorption, puis une Chromatographie des gaz et enfin une détection sélective des composants d'azote. Une évaluation de l'exposition des professionnels a été réalisée dans le secteur du nettoyage afin de déterminer la concentration atmosphérique en monoéthanolamine, en éthers de glycol et en alcool benzylique au cours des différentes tâches de nettoyage effectuées par les professionnels du nettoyage dans différentes entreprises, ainsi que pour déterminer les concentrations atmosphériques de fond en formaldéhyde, un polluant de l'air intérieur bien connu. L'étude de l'exposition professionnelle a été effectuée dans 12 compagnies de nettoyage et les échantillons d'air individuels ont été collectés pour l'éthanolamine (n=68), les éthers de glycol (n=79), l'alcool benzylique (n=15) et le formaldéhyde (n=45). Toutes les substances mesurées dans l'air, excepté le 2-butoxyéthanol, étaient en-dessous (<1/10) de la valeur moyenne d'exposition aux postes de travail en Suisse (8 heures), excepté pour le butoxypropanol et l'alcool benzylique, pour lesquels aucune valeur limite d'exposition n'était disponible. Bien que détecté qu'une seule fois, les concentrations d'air de 2-butoxyéthanol (n=4) étaient élevées (49,5 mg/m3 à 58,7 mg/m3), se situant au-dessus de la frontière des valeurs limites d'exposition aux postes de travail en Suisse (49 mg/m3). Les concentrations d'air de fond n'ont montré aucune présence de monoéthanolamine, alors que les éthers de glycol étaient souvent présents et les formaldéhydes quasiment toujours détectés. L'exposition des professionnels a été influencée par la quantité de monoéthanolamine présente dans les produits de nettoyage utilisés, par la ventilation extérieure et par l'emploie de sprays. Durant la dernière phase de l'étude, les informations collectées ont été utilisées pour tester un outil de modélisation de l'exposition déjà existant, l'outil de Bayesian. L'estimation de l'exposition de cet outil convergeait avec l'exposition mesurée. Cela a été le mieux décrit par une équation du second degré inversée. Les résultats suggèrent que l'outil de Bayesian n'est pas adapté pour mettre en évidence les taux d'expositions faibles. Cet outil devrait également être testé avec d'autres ensembles de données décrivant des taux d'expositions plus élevés. L'exposition répétée à des substances chimiques ayant des propriétés irritatives et sensibilisantes devrait être investiguée d'avantage, afin de mieux comprendre l'apparition de maladies respiratoires chez les professionnels du nettoyage. Des mesures de prévention devraient tout particulièrement être orientées sur l'utilisation correcte des produits de nettoyage, afin d'éviter les concentrations d'air élevées se situant à la valeur limite d'exposition acceptée.

A Research Report on Roadside Vegetation Management, December 1975

According to prevailing ecological theory one would expect the most stable vegetation on sites which are least disturbed (Odum 1971). According to theory one would also expect the most diversity of species on undisturbed sites (Odum 1971). This stable and diverse community would be produced over a period of many years through a process of plant succession where annual herbs are replaced by perennial herbs and finally woody plants would come to dominate and perpetuate the community. Another ecological theory holds that the complexity (structure and species diversity) of a plant community is dependent upon the amount of disturbance to which it is subjected (Woodwell, 1970). According to this theory the normal succession of a plant community through its various stages may be arrested at some point depending upon the nature and severity of the disturbance. In applying these theories to roadside vegetation it becomes apparent that mass herbicide spraying and extensive mowing of roadsides has produced a relatively simple and unstable vegetation. It follows that if disturbances were reduced not only would the roadside plant community increase in stability but maintenance costs and energy usage would be reduced. In this study we have investigated several aspects of reduced disturbances on roadside vegetation. Research has centered on the effectiveness of spot spraying techniques on noxious weed control, establishment of native grass cover where ditch cleaning and other disturbance has left the bare soil exposed and the response of roadside vegetation when released from annual mass spraying.

New vineyard cultivation practices create patchy ground vegetation, favouring Woodlarks

Intensive agriculture, in which detrimental farming practices lessen food abundance and/or reduce food accessibility for many animal species, has led to a widespread collapse of farmland biodiversity. Vineyards in central and southern Europe are intensively cultivated; though they may still harbour several rare plant and animal species, they remain little studied. Over the past decades, there has been a considerable reduction in the application of insecticides in wine production, with a progressive shift to biological control (integrated production) and, to a lesser extent, organic production. Spraying of herbicides has also diminished, which has led to more vegetation cover on the ground, although most vineyards remain bare, especially in southern Europe. The effects of these potentially positive environmental trends upon biodiversity remain mostly unknown as regards vertebrates. The Woodlark (Lullula arborea) is an endangered, short-distance migratory bird that forages and breeds on the ground. In southern Switzerland (Valais), it occurs mostly in vineyards. We used radiotracking and mixed effects logistic regression models to assess Woodlark response to modern vineyard farming practices, study factors driving foraging micro-habitat selection, and determine optimal habitat profile to inform management. The presence of ground vegetation cover was the main factor dictating the selection of foraging locations, with an optimum around 55% at the foraging patch scale. These conditions are met in integrated production vineyards, but only when grass is tolerated on part of the ground surface, which is the case on ca. 5% of the total Valais vineyard area. In contrast, conventionally managed vineyards covering a parts per thousand yen95% of the vineyard area are too bare because of systematic application of herbicides all over the ground, whilst the rare organic vineyards usually have a too-dense sward. The optimal mosaic with ca. 50% ground vegetation cover is currently achieved in integrated production vineyards where herbicide is applied every second row. In organic production, ca. 50% ground vegetation cover should be promoted, which requires regular mechanical removal of ground vegetation. These measures are likely to benefit general biodiversity in vineyards.

Leaf application of silicic acid to white oat and wheat

Silicon (Si) is beneficial to plants in several aspects, but there are doubts about the effectiveness of leaf application. The purpose of this work was to evaluate the effects of Si, applied in a newly developed stabilized silicic acid form to the leaf, on nutrition and yield of irrigated white oat and wheat. Two experiments were performed (one per crop) in winter 2008, in Botucatu-SP, Brazil. A completely randomized block design with 14 replications was used. Treatments consisted of a control (without Si application) and Si leaf spraying, at a rate of 2.0 L ha-1 of the commercial product containing 0.8 % soluble Si. Silicon rate was divided in three parts, i.e. applications at tillering, floral differentiation and booting stages. Silicon leaf application increased N, P, K, and Si concentrations in white oat flag leaf, resulting in higher shoot dry matter, number of panicles per m², number of grains per panicle and grain yield increase of 34 %. In wheat, Si leaf application increased K and Si concentrations, shoot dry matter and number of spikes per m², resulting in a grain yield increase of 26.9 %.