903 resultados para single test electron model
Resumo:
Hypercolumns in area V1 contain frequency- and orientation-selective simple and complex cells for line (bar) and edge coding, plus end-stopped cells for key- point (vertex) detection. A single-scale (single-frequency) mathematical model of single and double end-stopped cells on the basis of Gabor filter responses was developed by Heitger et al. (1992 Vision Research 32 963-981). We developed an improved model by stabilising keypoint detection over neighbouring micro- scales.
Resumo:
Dissertação mest., Gestão da Água e da Costa, Universidade do Algarve, 2007
Resumo:
Purpose This paper aims to propose the global nation product equity model (GNPE) to measure global consumers’ equity of a product that a country produces, especially a nation’s cultural products (i.e. culducts). The model also examines the significant difference of GNPE depending on a cultural diffusion level. GNPE model proposes that depending on the level of people’s recognition/acceptance/preference of a culture from another country (i.e. cultural diffusion level), the equity of a product from that country could be different in different countries. As variables that affect GNPE, global nation product equity in general, global nation product equity of a product category and nation cultural equity are included in the model. Design/methodology/approach To test the model, this study developed Hallyu (Korean cultural diffusion)-related Korean culducts and measured global consumers’ equity for the Korean culducts. In all, 351 surveys were collected from China, France, England and the USA. Findings The results show the significantly different equities and relationships among equities depending on the level of Hallyu diffusion in each country. Therefore, Korea is suggested to focus on different equities in different countries. Originality/value This research proposed a new model that extends the previous brand equity models to non-branded products (i.e. cultural products). This model proposed new variables that affect equity of a product mentioned above and suggests different equities to improve in different countries depending on their level of cultural diffusion. Also, this cross-cultural study suggests a direction of culduct design, distribution and promotion strategies in the global market.
Resumo:
Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica
Resumo:
Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica
Resumo:
Atualmente, verifica-se um aumento na necessidade de software feito à medida do cliente, que se consiga adaptar de forma rápida as constantes mudanças da sua área de negócio. Cada cliente tem os seus problemas concretos que precisa de resolver, não lhe sendo muitas vezes possível dispensar uma elevada quantidade de recursos para atingir os fins pretendidos. De forma a dar resposta a estes problemas surgiram várias arquiteturas e metodologias de desenvolvimento de software, que permitem o desenvolvimento ágil de aplicações altamente configuráveis, que podem ser personalizadas por qualquer utilizador das mesmas. Este dinamismo, trazido para as aplicações sobre a forma de modelos que são personalizados pelos utilizadores e interpretados por uma plataforma genérica, cria maiores desafios no momento de realizar testes, visto existir um número de variáveis consideravelmente maior que numa aplicação com uma arquitetura tradicional. É necessário, em todos os momentos, garantir a integridade de todos os modelos, bem como da plataforma responsável pela sua interpretação, sem ser necessário o desenvolvimento constante de aplicações para suportar os testes sobre os diferentes modelos. Esta tese debruça-se sobre uma aplicação, a plataforma myMIS, que permite a interpretação de modelos orientados à gestão, escritos numa linguagem específica de domínio, sendo realizada a avaliação do estado atual e definida uma proposta de práticas de testes a aplicar no desenvolvimento da mesma. A proposta resultante desta tese permitiu verificar que, apesar das dificuldades inerentes à arquitetura da aplicação, o desenvolvimento de testes de uma forma genérica é possível, podendo as mesmas lógicas ser utilizadas para o teste de diversos modelos distintos.
Resumo:
In the fields of marketing and general management, many are the contributions of literature relating trust and e‐commerce. Trust is perceived as an issue that concerns the consumers’ intention to purchase. As so, in this research, a path model is empirically tested in order to develop solutions for Internet vendors on how to deal with consumers and increase their trust. The path model measures how the dimensions of trust, named as competence, integrity and benevolence positively influence the overall trust of the consumers and at the same time how the sources of trust – consumer characteristics, firm characteristics, website infrastructure and interactions influence those dimensions. The data used to test the model was collected in Portugal, through 365 valid cases. Findings revealed that consumers, which have high level of overall trust, are more likely to intent to purchase online.
Resumo:
It has been long recognized that highly polymorphic genetic markers can lead to underestimation of divergence between populations when migration is low. Microsatellite loci, which are characterized by extremely high mutation rates, are particularly likely to be affected. Here, we report genetic differentiation estimates in a contact zone between two chromosome races of the common shrew (Sorex araneus), based on 10 autosomal microsatellites, a newly developed Y-chromosome microsatellite, and mitochondrial DNA. These results are compared to previous data on proteins and karyotypes. Estimates of genetic differentiation based on F- and R-statistics are much lower for autosomal microsatellites than for all other genetic markers. We show by simulations that this discrepancy stems mainly from the high mutation rate of microsatellite markers for F-statistics and from deviations from a single-step mutation model for R-statistics. The sex-linked genetic markers show that all gene exchange between races is mediated by females. The absence of male-mediated gene flow most likely results from male hybrid sterility.
Resumo:
We have calculated the thermodynamic properties of monatomic fcc crystals from the high temperature limit of the Helmholtz free energy. This equation of state included the static and vibrational energy components. The latter contribution was calculated to order A4 of perturbation theory, for a range of crystal volumes, in which a nearest neighbour central force model was used. We have calculated the lattice constant, the coefficient of volume expansion, the specific heat at constant volume and at constant pressure, the adiabatic and the isothermal bulk modulus, and the Gruneisen parameter, for two of the rare gas solids, Xe and Kr, and for the fcc metals Cu, Ag, Au, Al, and Pb. The LennardJones and the Morse potential were each used to represent the atomic interactions for the rare gas solids, and only the Morse potential was used for the fcc metals. The thermodynamic properties obtained from the A4 equation of state with the Lennard-Jones potential, seem to be in reasonable agreement with experiment for temperatures up to about threequarters of the melting temperature. However, for the higher temperatures, the results are less than satisfactory. For Xe and Kr, the thermodynamic properties calculated from the A2 equation of state with the Morse potential, are qualitatively similar to the A 2 results obtained with the Lennard-Jones potential, however, the properties obtained from the A4 equation of state are in good agreement with experiment, since the contribution from the A4 terms seem to be small. The lattice contribution to the thermal properties of the fcc metals was calculated from the A4 equation of state, and these results produced a slight improvement over the properties calculated from the A2 equation of state. In order to compare the calculated specific heats and bulk moduli results with experiment~ the electronic contribution to thermal properties was taken into account~ by using the free electron model. We found that the results varied significantly with the value chosen for the number of free electrons per atom.
Resumo:
One hundred and thirty four subjects participated in this survey. Quantitative data were obtained and correlational analyses were used to test a model to study the relationships among the achievement of work values and organizational commitment and job satisfaction and to identify the moderating effects of the meaningfulness of work and responsibility for work on these relationships. Part-time faculty in the Faculty of Continuing Education of a community college were mailed a questionnaire on all the variables of the model. Several reliable, valid instruments were used to test the variables. Data analysis through Pearson correlation and stepwise multiple regression analyses revealed that the achievement of the work values of recognition and satisfaction with promotions did predict organizational commitment and job satisfaction, although the moderating effects of the meaningfulness of work and responsibility for work was not supported in this study. This study suggests that the revised model may be used for determining the relationships between the achievement of work values and organizational commitment and job satisfaction in a community college setting.
Resumo:
We have calculated the equation of state and the various thermodynamic properties of monatomic fcc crystals by minimizing the Helmholtz free energy derived in the high temperature limit for the quasiharmonic theory, QH, and the lowest-order (cubic and quartic), 'A2, anharmonic terms of the perturbation theory, PT. The total energy in each case is obtained by adding the static energy. The calculation of the thermal properties was carried out for a nearest-neighbour central-force model of the fcc lattice by means of the appropriate thermodynamic relations. We have calculated the lattice constant, the thermal expansion, the coefficient of volume expansion, the specific heat at constant volume and at constant pressure, the isothermal and adiabatic bulk moduli, and the Griineisen parameter, for the rare-gas solids Kr and Xe, and gold. Morse potential and modified Morse potential were each used to represent the atomic interaction for the three fcc materials. For most of the calculated thermodynamic properties from the QH theory, the results for Kr and Xe with the modified Morse potential show an improvement over the results for the Morse potential when compared with the experimental data. However, the results of the 'A 2 equation of state with the modified Morse potential are in good agreement with experiment only in the case of the specific heat at constant volume and at constant pressure. For Au we have calculated the lattice contribution from the QH and 'A 2 PT and the electronic contribution to the thermal properties. The electronic contribution was taken into account by using the free electron model. The results of the thermodynamic properties calculated with the modified Morse potential were similar to those obtained with the Morse potential. U sing the minimized equation of state we also calculated the Mossbauer recoilless fraction for Kr and Xe and the Debye-Waller factor (DWF) for Pb, AI, eu, Ag, and Au. The Mossbauer recoilless fraction was obtained for the above two potentials and Lennard-Jones potential. The L-J potential gives the best agreement with experiment for Kr. No experimental data exists for Xe. At low temperature the calculated DWF results for Pb, AI, and eu show a good agreement with experimental values, but at high temperature the experimental DWF results increase very rapidly. For Ag the computed values were below the expected results at all temperatures. The DWF results of the modified Morse potential for Pb, AI, eu and Ag were slightly better than those of the Morse potential. In the case of Au the calculated values were in poor agreement with experimental results. We have calculated the quasiharmonic phonon dispersion curves for Kr, Xe, eu, Ag, and Au. The calculated and experimental results of the frequencies agree quite well for all the materials except for Au where the longitudinal modes show serious discrepancies with the experimental results. In addition, the two lowest-order anharmonic contributions to the phonon frequency were derived using the Green's function method. The A 2 phonon dispersion curves have been calculated only for eu, and the results were similar to those of the QH dispersion curves. Finally, an expression for the Griineisen parameter "( has been derived from the anharmonic frequencies, and calculated for these materials. The "( results are comparable with those obtained from the thermodynamic definition.
Resumo:
The puq)ose of this thesis is to test a model Hnking community disadvantage and urbanicity factors to parenting variables (i.e., monitoring, warmth, and knowledge) and to youth risk behavior (i.e., substance use and delinquency), measured both concurrently and one year after the assessment of parenting variables. The model builds on the work of Fletcher, Steinberg, and Williams-Wheeler (2004) but a) includes a more comprehensive measure of SES than that conceptualized by Fletcher et al.; b) considers whether the role of community disadvantage is indirectly as well as directly linked to youth risk behavior, by way of its association with parenting variables; c) considers whether level of community urbanicity plays a direct role in predicting both parenting variables and risk behaviors, or whether its influence on risk behaviours is primarily indirect through parenting variables. Both community disadvantage and urbanicity had virtually no relation to parenting and risk behaviour variables. Results found for relations of parenting variables and risk behaviour were similar to Fletcher et al. Although urban youth are typically perceived as being more at risk for substance use and delinquency, no evidence was found for a distinction between urban and rural youth within this sample. Targeting risk behaviour prevention/reduction programs toward only urban youth, therefore, is not supported by these findings.
Resumo:
Empirical research has consistently demonstrated a positive association between psychopathic traits and physical aggression (Campbell, Porter, & Santor, 2004; Gretton, Hare, & Catchpole, 2004; Raine et aI., 2006; Spain, Douglas, Poythress, & Epstein, 2004). Moreover, research has also found that the emotional/interpersonal (Factor 1) psychopathy traits tend to be more closely associated with goal oriented, proactive aggression, whereas the social deviance (Factor 2) psychopathy characteristics have been more closely linked to reactive aggression, which is perpetrated in response to threat or provocation (Flight & Forth, 2007). Blair (2004; 2005; 2006) has recently proposed the Integrated Emotions Systems Model (lES), which posits that the association between Factor 1 psychopathy traits and proactive aggression is due to amygdala dysfunction leading to failed moral socialization. Consequently, individuals who exhibit Factor 1 psychopathy traits do not experience affective empathy in response to distress cues exhibited by others, thus, preventing the inhibition of proactive aggression. The current investigation sought to test this model by examining the associations among the emotional/interpersonal (Factor 1) psychopathy traits, proactive aggression, and affective empathy. After accounting for head injury, Factor 2 psychopathy traits, reactive aggression, and cognitive empathy, it was hypothesized that 1) Factor 1 psychopathy traits would predict proactive aggression, and 2) that affective empathy is a common cause of Factor 1 psychopathy traits, proactive aggression, and of the relationship between these two constructs. This hypothesis assumed that (a) affective empathy would uniquely predict Factor 1 psychopathy traits, (b) that affective empathy would uniquely predict proactive aggression, and (c) that affective empathy would account for the relationship between Factor I psychopathy traits and proactive aggression. The total sample consisted of 137 male undergraduate students. Participants completed measures of psychopathy (SRP III; Paulhus, Hemphill, & Hare, in press), aggression (PCS; Marsee, Kimonis, & Frick, 2004; RPQ; Raine et at, 2006), dispositional cognitive and affective empathy (BES; Jolliffe & Farrington, 2006; TES; Spreng, McKinnon, Mar, & Levine, 2009), and situational cognitive and affective empathy in response to neutral and empathy eliciting video clips. Physiological indices (heart rate & electrodermal activity) of affective empathy were also obtained while participants viewed the neutral and empathy eliciting videos. Findings indicated that Factor I psychopathy traits predicted proactive aggression. In addition, results demonstrated that affective empathy predicted both Factor I psychopathy traits and proactive aggression. However, the association between affective empathy and proactive aggression appeared to be dependent on the conceptualization and measurement of affective empathy. Conversely, affective empathy did not appear to account for the relationship between Factor I psychopathy traits and proactive aggression. Overall, results demonstrated partial support for the IES model. Implications of the results, limitations of the study and future research directions are discussed.
Resumo:
This thesis examines physicians’ satisfaction with electronic medical records (EMRs) in the post-adoption phase. More specifically, the study examines how physicians’ satisfaction with EMRs impacts on their intention to continue using as well as extend their adoption of additional functions of EMRs. Expectation-confirmation theory is used with the incorporation of perceived risk as the theoretical framework. The extended theoretical model is used to formulate eight hypotheses to aid in the understanding of physicians’ continuance intentions. A field survey of 135 Canadian physicians that utilize EMRs was performed to test the model empirically. The study found that physicians are willing to continue using and adopting additional components of EMRs. In addition, the empirical results suggest that physicians’ perceived usefulness and perceived risk impacts satisfaction, which in turn influences physicians’ continuance intentions. As well, perceived risk has an influence on physicians’ continuance intentions directly.
Resumo:
Grounded on the resource-based view of the firm, the study of this thesis investigates the effect of four internal and external factors – engineer intensity, location, affiliation with the government, government funding – on Chinese firms’ decision to either invest in internal R&D activities or external R&D and the effect of this decision on the firms’ international market success. In addition, the moderating role of the presence of foreign firms in China is examined. To understand these relationships, the thesis’ theorization focuses on the issue of how firms can combine optimally the two options – “internal R&D” and “external R&D”. In this regard I juxtapose internal R&D and external R&D and compare their advantages and disadvantages. To test my model, I apply panel data from the Annual Industrial Survey Database provided by the Chinese National Bureau of Statistics. My results show that three of the four investigated factors affect Chinese firms’ resource allocation decisions; and effective resource allocation decisions lead effectively to international market success, strengthened by the presence of foreign firms in China. Moreover the findings bear several theoretical and managerial contributions. First I propose the last dimension of the “VRIO framework” – “organization” – as an endogenous component of the VRIO framework, as my study investigated how firms can effectively combine resources to generate a competitive advantage in terms of international market success. Previous academic literature so far focused on examining whether internal and external R&D are complements or substitutes. My study fills a gap in the literature by investigating the determinants of the efficient combination of the two strategies and the outcome of the combination. One of the managerial implications is that Chinese firms can learn from foreign companies that are present in China.