Produção de etanol utilizando cascas de banana e de laranja por co-fermentação de Zymomonas mobilis e Pichia stipitis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise histopatológica de fígado de tilápias (Oreochromis Niloticus) expostas ao herbicida 2,4-D comercial

The action of man has led, over the years, major impacts on the environment, especially in aquatic ecosystems, leading to an impairment of water quality, considered one of the essential factors for the maintenance of vital functions and consequently the life of the planet. Among the activities considered a risk for the environment are linked to pollution from many sources and even entire watersheds, whether by industrial waste, sewage, or for substances used in agriculture, such as pesticides, herbicides and fertilizers. The (2,4-D) 2,4- dichlorophenoxyacetic acid is used worldwide, and the fact that its genotoxicity is proven by several studies and by its long persistence in soil, which enables the leaching and percolation of compounds affecting water bodies, toxicity studies are relevant and justifiable. Thus, this study aimed to evaluate the toxicity of 2,4-D by examining the liver of the fish Oreochromis niloticus exposed to different dilutions. Portions of liver were collected and fixed for histological and histochemical techniques to detect total proteins, polysaccharides and lipids. lipids. Treatment with 2,4-D herbicide apparently did not alter the lipid profiles, the accumulation of polysaccharides, and the presence of total proteins. The 2.5 and 5.0% were lethal to fish. These mortalities are probably of high toxic and cytotoxic potential of 2,4-D herbicide results. Several histopathological changes were found, such as: loss of cytoplasmic integrity, loss of cell limit, nuclear deformation, vacuolated cytoplasm, tissue disorganization and hydropic degeneration. Statistically significant changes were: hydropic degeneration and vacuolated cytoplasm. It is concluded, therefore, that the qualitative morphological analysis is an important method for observing changes in liver toxicology studies. As the O. niloticus species is an efficient biological indicator of water pollution by 2,4-D

Utilização das sementes de Moringa oleifera como adsorvente para a remoção de corantes têxteis em meio aquoso

Com o grande crescimento da população e consequentemente o aumento significativo do consumo de produtos de origem industrial, quantidades enormes de efluentes são geradas, e muitas vezes descartadas de forma imprópria. Esses resíduos industriais comumente são eliminados em mananciais hídricos, afetando lençóis freáticos, córregos, rios e oceanos. Uma das maiores evidências da poluição da água é a alteração de sua cor original. Despejo de efluentes têxteis, por exemplo, alem de alterar drasticamente a cor dos mananciais, geram produtos e subprodutos tóxicos, nocivos tanto para a flora como para a fauna aquática. Essas substâncias possuem alta persistência em meio aquático devido a sua natureza química, conferindo a estes efluentes um lento processo de biodegradação e podendo ter efeito bioacumulativo na cadeia alimentar. Assim veem sendo desenvolvidas diversas maneiras de se controlar a quantidade e a qualidade de efluentes industriais, dentre eles os de corantes têxteis. As técnicas mais utilizadas são a cloração, filtração, tratamentos floculantes e adsorção por Carvão Ativados. Porem, muitas vezes esses processos possuem desvantagens, como, por exemplo, o alto custo e alterações drásticas no pH. Assim tratamentos alternativos, como o uso de Moringa oleifera, veem sendo muito estudados. Este trabalho visou avaliar o potencial do uso das sementes de Moringa oleifera como adsorvente na remoção de corantes têxteis em meio aquoso. Para isso foi analisado a remoção do corante Direct Violet 51, utilizando pó das sementes. Foram realizados testes com diferentes tempos de contato nos valores de pH 2,5, 4,5 e 6,5. Posteriormente novos testes foram realizados, utilizando o sobrenadante e a biomassa das sementes, ambos na forma livre e imobilizada em alginato de calcio, bem como reutilização destes. Através da analise das amostras, notou-se que o processo de coagulação/floculação sobressaiu-se em...

Avaliação da qualidade de óleos compostos obtidos de fontes alternativas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise histopatológica de fígado de tilápias (Oreochromis Niloticus) expostas ao herbicida 2,4-D comercial

The action of man has led, over the years, major impacts on the environment, especially in aquatic ecosystems, leading to an impairment of water quality, considered one of the essential factors for the maintenance of vital functions and consequently the life of the planet. Among the activities considered a risk for the environment are linked to pollution from many sources and even entire watersheds, whether by industrial waste, sewage, or for substances used in agriculture, such as pesticides, herbicides and fertilizers. The (2,4-D) 2,4- dichlorophenoxyacetic acid is used worldwide, and the fact that its genotoxicity is proven by several studies and by its long persistence in soil, which enables the leaching and percolation of compounds affecting water bodies, toxicity studies are relevant and justifiable. Thus, this study aimed to evaluate the toxicity of 2,4-D by examining the liver of the fish Oreochromis niloticus exposed to different dilutions. Portions of liver were collected and fixed for histological and histochemical techniques to detect total proteins, polysaccharides and lipids. lipids. Treatment with 2,4-D herbicide apparently did not alter the lipid profiles, the accumulation of polysaccharides, and the presence of total proteins. The 2.5 and 5.0% were lethal to fish. These mortalities are probably of high toxic and cytotoxic potential of 2,4-D herbicide results. Several histopathological changes were found, such as: loss of cytoplasmic integrity, loss of cell limit, nuclear deformation, vacuolated cytoplasm, tissue disorganization and hydropic degeneration. Statistically significant changes were: hydropic degeneration and vacuolated cytoplasm. It is concluded, therefore, that the qualitative morphological analysis is an important method for observing changes in liver toxicology studies. As the O. niloticus species is an efficient biological indicator of water pollution by 2,4-D

Utilização das sementes de Moringa oleifera como adsorvente para a remoção de corantes têxteis em meio aquoso

Com o grande crescimento da população e consequentemente o aumento significativo do consumo de produtos de origem industrial, quantidades enormes de efluentes são geradas, e muitas vezes descartadas de forma imprópria. Esses resíduos industriais comumente são eliminados em mananciais hídricos, afetando lençóis freáticos, córregos, rios e oceanos. Uma das maiores evidências da poluição da água é a alteração de sua cor original. Despejo de efluentes têxteis, por exemplo, alem de alterar drasticamente a cor dos mananciais, geram produtos e subprodutos tóxicos, nocivos tanto para a flora como para a fauna aquática. Essas substâncias possuem alta persistência em meio aquático devido a sua natureza química, conferindo a estes efluentes um lento processo de biodegradação e podendo ter efeito bioacumulativo na cadeia alimentar. Assim veem sendo desenvolvidas diversas maneiras de se controlar a quantidade e a qualidade de efluentes industriais, dentre eles os de corantes têxteis. As técnicas mais utilizadas são a cloração, filtração, tratamentos floculantes e adsorção por Carvão Ativados. Porem, muitas vezes esses processos possuem desvantagens, como, por exemplo, o alto custo e alterações drásticas no pH. Assim tratamentos alternativos, como o uso de Moringa oleifera, veem sendo muito estudados. Este trabalho visou avaliar o potencial do uso das sementes de Moringa oleifera como adsorvente na remoção de corantes têxteis em meio aquoso. Para isso foi analisado a remoção do corante Direct Violet 51, utilizando pó das sementes. Foram realizados testes com diferentes tempos de contato nos valores de pH 2,5, 4,5 e 6,5. Posteriormente novos testes foram realizados, utilizando o sobrenadante e a biomassa das sementes, ambos na forma livre e imobilizada em alginato de calcio, bem como reutilização destes. Através da analise das amostras, notou-se que o processo de coagulação/floculação sobressaiu-se em...

Avaliação da qualidade de óleos compostos obtidos de fontes alternativas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da substituição da fluorita por alumina ou sodalita e de cal por resíduo de mármore em escórias sintéticas dessulfurantes.

A siderurgia vem sofrendo transformações que buscam inovação e matérias-primas alternativas. Dentro deste contexto, o uso de resíduos industriais para a formação de escórias sintéticas é tido como alternativa na busca de novos materiais e rotas de reaproveitamento de resíduos. Portanto, este trabalho teve como objetivo estudar o uso de escórias sintéticas na etapa de dessulfuração do ferro-gusa, aço e ferro fundido. Assim como, propor a utilização da sodalita e da alumina em substituição à fluorita e o resíduo de mármore em substituição à cal convencional. Inicialmente, o resíduo foi caracterizado utilizando as seguintes técnicas: análise química, análise granulométrica, área de superfície específica, difração de raios-X, microscopia eletrônica de varredura (MEV) e análise de espectroscopia por energia dispersiva (EDS). Os resultados da caracterização mostraram que aproximadamente 90% das partículas do resíduo de mármore estão abaixo de 100m e sua área superficial foi de 0,24m²/g. Através da difração de raios-X foi observado que o resíduo é composto por CaCO3, MgCO3 e SiO2. Na sequência, foram feitas simulações com o software Thermo-Calc para obter dados termodinâmicos das fases presentes nas misturas e compará-los com os resultados experimentais. Além disso, também foram calculados dados de capacidade de sulfeto (Cs), partição de enxofre (Ls) e basicidade ótica () das misturas iniciais. Posteriormente, foram realizados os ensaios experimentais em escala laboratorial para ferro-gusa, ferro fundido e aço, respectivamente nas temperaturas de 1400°C, 1550°C e 1600°C. Nos ensaios de dessulfuração do aço e do ferro-gusa, utilizou-se um rotor de alumina com o objetivo de favorecer a agitação no metal e aumentar a remoção de enxofre. Na etapa de dessulfuração do ferro-gusa, constatou-se que a fase sólida de CaO é a responsável pela remoção de enxofre e que a presença das fases silicato tricálcio e aluminato tricálcio (3CaO.SiO2 e 3CaO.Al2O3) limitam a reação, sendo maiores suas concentrações nas escórias que utilizaram o resíduo de mármore e sodalita, devido a presença de SiO2 e Al2O3 nestas matérias-primas. Já para o aço e o ferro fundido, que foram estudados com escórias à base de CaO e Al2O3, observou-se que o aumento da fase líquida favoreceu a dessulfuração. Verificou-se que a dessulfuração no ferro fundido foi por escória de topo e no aço por um processo misto, onde a fase líquida e fase sólida participaram da dessulfuração.

Aplicação da tecnologia eletroquímica para a remoção e monitoramento de metais pesados em efluentes aquosos

Heavy metals are present in industrial waste. These metals can generate a large environmental impact contaminating water, soil and plants. The chemical action of heavy metals has attracted environmental interest. In this context, this study aimed to test t he performance of electrochemical technologies for removing and quantifying heavy metals. First ly , the electroanalytical technique of stripping voltammetry with glassy carbon electrode (GC) was standardized in order to use this method for the quantificatio n of metals during their removal by electrocoagulation process (EC). A nalytical curves were evaluated to obtain reliability of the determin ation and quantification of Cd 2+ and Pb 2+ separately or in a mixture. Meanwhile , EC process was developed using an el ectrochemical cell in a continuous flow (EFC) for removing Pb 2+ and Cd 2+ . The se experiments were performed using Al parallel plates with 10 cm of diameter (  63.5 cm 2 ) . The optimization of conditions for removing Pb 2+ and Cd 2+ , dissolved in 2 L of solution at 151 L h - 1 , were studied by applying different values of current for 30 min. Cd 2+ and Pb 2+ concentrations were monitored during electrolysis using stripping voltammetry. The results showed that the removal of Pb 2 + was effective when the EC pro cess is used, obtaining removals of 98% in 30 min. This behavior is dependent on the applied current, which implies an increase in power consumption. From the results also verified that the stripping voltammetry technique is quite reliable deter mining Pb 2+ concentration , when compared with the measurements obtained by atomic absorption method (AA). In view of this, t he second objective of this study was to evaluate the removal of Cd 2+ and Pb 2+ (mixture solution) by EC . Removal efficiency increasing current was confirmed when 93% and 100% of Cd 2+ and Pb 2+ was removed after 30 min . The increase in the current promotes the oxidation of sacrificial electrodes, and consequently increased amount of coagulant, which influences the removal of heavy metals in solution. Adsortive voltammetry is a fast, reliable, economical and simple way to determine Cd 2+ and Pb 2+ during their removal. I t is more economical than those normally used, which require the use of toxic and expensive reagents. Our results demonstrated the potential use of electroanalytical techniques to monitor the course of environmental interventions. Thus, the application of the two techniques associated can be a reliable way to monitor environmental impacts due to the pollution of aquatic ecosystems by heavy metals.

Caracterização mecânica, térmica e acústica de um compósito que utiliza rejeitos de mármore, granito e EPS para a fabricação de blocos para a construção civil

The use of composite materials for the construction industry has been the subject of numerous scientific papers in Brazil and in the world. One of the factors that motivate this quest is the housing deficit that countries especially the third world face. In Brazil this deficit reaches more than 6.5 million homes, around 12% of all US households . This paper presents a composite that was obtained from waste generated in processes for the production of granite and marble slabs, cement, gypsum, sand, crushed EPS and water. These wastes cause great damage to the environment and are thrown into landfi lls in bulk. The novelty of the work is in the combined study thermal, mechanical and acoustic composite obtained in real situation of rooms that are part of an experimental housing. Many blocks were made from cement compositions, plaster, foam, sand, marb le and / or granite, preliminary tests of mechanical and thermal resistance were made by choosing the most appropriate proportion. Will be given the manufacturing processes and assembly units 500 units 10 x 80 x 28 cm produced for the construction of an ex perimental home. We studied what kind of block and residue, marble or granite, made it more feasible for the intended purpose. The mechanical strength of the produced blocks were above 3.0 MPa. The thermal resistance of the blocks was confirmed by the maxi mum temperature difference between the inner and outer walls of rooms built around 8.0 ° C. The sound absorption for optimal room was around 31%. Demonstrated the feasibility of using the blocks manufactured with composite material proposed for construction.

Avaliação da potencialidade de incorporação de um lodo de uma indústria de produtos de limpeza como adição mineral em concretos de cimento Portland

The generation of industrial wastes has been increased more and more in recent decades, motivating studies about a correct sustainable allocation and that also represents advantages for their generators. In this context, are included two companies of cleaning products niche, located in São José do Mipibu/RN, that produces industrial sludge at a sewage treatment plant, and that is the main approach of this research. Given this, it was studied the incorporation potentiality of this sludge as a mineral addition in cement matrix for concrete production due it high capacity of wastes immobilization inside this material, which are subsequently used in the company for making precast articles. Were added different sludge concentrations (5, 10, 15 and 20%) in a common trait (1: 2: 3), and evaluated their techniques and microstructural implications via workability test in fresh state and compressive strength, full porosity and scanning electron microscopy (SEM) in the hardened state. The results demonstrated the feasibility of the process both from a technical and environmental view as economical. All concretes produced with residue showed an increase of workability given the nature of the waste that had surfactants substances capable of adsorbing tiny particles of air into the batter. However, for all concentrations were obtained lower compressive resistances than standard concrete, with a reduction of 39% for samples with 20% of sludge. This are attributed mainly to an increase of porosity in the transition zone of these material, resulting from increased formation of ettringite at the detriment to the formation of other compounds, but which still allows the use of these for the manufacture of concrete articles with non-structural nature, such as precast floor. In addition, the water absorption and void ratio increased slightly for all samples, except the concrete with 20% of waste that has a reduction for the last parameter. Given this context, the recommended maximum level is 20%, constituting a significant proportion and able to allocate sustainably all waste generated in the industry.

Caracterização de um compósito utilizando cimento com agregado de resíduo plástico e resíduo de gesso

The demand for environmental comfort in construction systems within the insulation and thermal comfort, plus the advent of new laws regulating the minimum requirements of comfort, disposal of solid industrial waste, construction waste, the requirements of consumers by adopting construction methods "cleaner", encouraged the development of this work. Aims technologically characterize the composite proposed in three types of samples (10%, 30% and 50% of thermoset plastic industrial waste) and raw materials: gypsum waste, cement and plastic thermosetting industrial waste in order to produce the composite with properties of thermal insulation: conductivity, thermal diffusivity, specific heat and resistivity. The physical, structural and morphological properties of the raw materials were investigated by thermogravimetry analysis (TG / DSC), X-ray diffraction (DRX), X-ray fluorescence (FXR) and scanning electron microscopy (MEV). Obtaining mechanical properties through the compression strength test. The analysis results indicate characteristics suitable for cement matrix composite production with the addition of thermosetting plastic industrial waste and gypsum waste, with potential application of these materials in composites with properties of thermal insulation. Finally, assessing what proportion showed up with better performance. Considering the analysis and testing carried out.

Caracterização de um compósito utilizando cimento com agregado de resíduo plástico e resíduo de gesso

The demand for environmental comfort in construction systems within the insulation and thermal comfort, plus the advent of new laws regulating the minimum requirements of comfort, disposal of solid industrial waste, construction waste, the requirements of consumers by adopting construction methods "cleaner", encouraged the development of this work. Aims technologically characterize the composite proposed in three types of samples (10%, 30% and 50% of thermoset plastic industrial waste) and raw materials: gypsum waste, cement and plastic thermosetting industrial waste in order to produce the composite with properties of thermal insulation: conductivity, thermal diffusivity, specific heat and resistivity. The physical, structural and morphological properties of the raw materials were investigated by thermogravimetry analysis (TG / DSC), X-ray diffraction (DRX), X-ray fluorescence (FXR) and scanning electron microscopy (MEV). Obtaining mechanical properties through the compression strength test. The analysis results indicate characteristics suitable for cement matrix composite production with the addition of thermosetting plastic industrial waste and gypsum waste, with potential application of these materials in composites with properties of thermal insulation. Finally, assessing what proportion showed up with better performance. Considering the analysis and testing carried out.

Investigação da rota biohidrometalúrgica com Acidithiobacillus ferrooxidans/thiooxidans para recuperação do cobalto de baterias de íons lítio descartadas

The recycling of metals from secondary sources can be advantageous. Among the metals of interest, we have cobalt, a metal used for various purposes. As regards the secondary sources of cobalt, the lithium-ion batteries can be considered, since they contain cobalt oxide in their composition (LiCoO2). This way, the objective of this work was to use the microorganism strains (Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans) to bioleach the LiCoO2 extracted from discarded lithium ion batteries with emphasis on the recovery of cobalt for synthesis of new materials of interest. The lineage growth occurred in T&K medium and the growth investigation was made by observing the media, by platelet growth and microscope analysis. Then, the inoculum was standardized on 5 x 106 cells mL-1 and used in bioleaching tests. The bioleaching was investigated: the microorganism nature: separate strains and A. ferrooxidans and A. thiooxidans consortium, bioleaching time (0 to 40 days), inoculum proportion (5 to 50% v/v), energy source (iron and sulfur) and residue concentration (1063 to 8500 mg L-1 of cobalt). The cobalt concentration in the media was found by atomic absorption spectrometry and the medium pH was monitored during the bioleaching. The results show that the amount of bioleached cobalt increases with time and the iron concentration. The bioleaching with A. thiooxidans was not influenced by the addition of sulfur. The use of the two lineages together did not improve the bioleaching rates. Among the lineages, the A. thiooxidans presented better results and was able to bioleach cobalt amounts above 50% in most of the experiments. A. thiooxidans presented lower bioleaching rates, with a maximum of 50% after 24 days of experiment. After reprocessing by bioleaching, the cobalt in solution was used for synthesis of new materials: such as LiCoO2 cathode and as adsorbent pesticide double lamellar hydroxide (HDL Co-Al-Cl) by the Pechini and co-precipitation methods. The reprocessed LiCoO2 presented a unique stoichiometric phase relative to the HT-LiCoO2 structure similar to the JCPDS 44-0145, presenting electrochemical activity when tested as a cathode material. The double lamellar hydroxide Co-Al-Cl was tested as pesticide adsorbent, being possible to adsorb around 100% of the pesticide. The bioleaching was efficient in the recovery of cobalt present in lithium-ion batteries and microorganisms presented high tolerance to the residue, being able to bioleach even at higher LiCoO2 concentrations. The cobalt bioleaching medium did not impair the synthesis phases and the obtained materials presented structure and activity similar to the sintered materials from the reagents containing cobalt.

Material para construção civil a partir de lodo de estação de tratamento de água, lama de polimento de mármore e resíduo de produção de cal

The rapid population growth is the great motivator for the development of the construction industry and the increased demand for drinking water, resulting in a gradual increase in the generation of solid waste. Thus, this work was carried out in order to recycle industrial and municipal wastes incorporating them into materials for civil construction. The composite produced from water treatment sludge and marble polishing mud, applying lime production waste as a binder, was evaluated for its mechanical performance and its morphological structure. The raw materials were characterized for their chemical composition, mineralogy, morphology, particle size and also the moisture content. With the featured materials nine compositions have been developed varying the content of the water treatment sludge between 25 to 50%, marble polishing mud between 35 to 50% and the lime production waste between 10 to 30%. The composites were subjected to mechanical strength tests, water absorption, chemical and mineralogical composition and morphology. The developed materials presented, on the 3rd day of hydration, maximum strength value of 4.65 MPa, the 7th day 6.36 MPa, on the 14th day 6.74 MPa, the 28th day 5.98 MPa, on the 60th day 8.52 MPa at 90th day 11.75 MPa and 180th day 12.06 MPa. The water absorption values after 28 days of hydration ranged from 16.27% to 26.32% and after 90 days, from 13.57% to 23.56%.