Influência da temperatura nos parâmetros de modelos bi-paramétricos que predizem isotermas de adsorção de umidade do guaraná (Paullinia cupana) em pó

Oito modelos matemáticos bi-paramétricos, existentes na literatura e com larga aplicação na predição de isotermas de adsorção foram submetidos à análise. O guaraná (Paullinia cupana) em pó objeto deste estudo foi obtido em "spray dryer", a partir de um extrato hidroalcoólico. Ajustaram-se os pontos experimentais das isotermas de adsorção de umidade do produto à 15°C, 25°C e 35°C, por análise de regressão não-linear. Para estudar o efeito da temperatura nos parâmetros dos modelos utilizaram-se regressões dos tipos: linear, exponencial, logarítmica e inversa. Utilizou-se para fazer os ajustes o aplicativo STATGRAPHICS 5.1. Entre os modelos testados os que apresentam melhores resultados foram as equações de Handerson, Oswin e Mizrahi.

Aplicação de modelos matemáticos bi e tri-paramétricos na predição de isotermas de adsorção de umidade do guaraná (Paullinia cupana) em pó

Doze modelos matemáticos (seis bi-paramétricos e seis tri-paramétricos), amplamente utilizados na predição de isotermas, foram estudados, com o objetivo de predizer isotermas de adsorção de umidade do guaraná (Paullinia cupana) em pó, obtido em "sprey dryer". As isotermas de adsorção de umidade do produto à 15° C, 25° C e 35° C, foram ajustadas por análise de regressão não-linear, usando o aplicativo STATGRAPHICS 5.1. Entre os modelos testados os que apresentaram melhores resultados nos ajustes foram as equações tri-paramétricas de GAB, BET modificada e Anderson, e as equações bi-paramétricas de Handerson e Oswin.

Adsorção de molibdato em minerais de argilas naturais e modificadas com ácido sulfúrico, ácido húmico e uréia

Sedimentos argilosos provenientes do município Assis Brasil, Acre, foram lixiviados com soluções de ácido sulfúrico, ácido húmico e uréia, visando avaliar a capacidade de retenção de molibdato nesses materiais e investigar a viabilidade do processo de adsorção na interface sólido-solução. Os materiais foram caracterizados a partir de dados de difração de raios X, espectros FTIR, cargas superficiais e composição química. Os modelos de isotermas de Langmuir, Freundlich e Sips foram usados no ajuste dos dados experimentais de adsorção. Os minerais identificados nos sedimentos argilosos foram esmectita, caulinita, ilita, quartzo, albita, microclineo e calcita. A modificação química promoveu a amorfização da amostra modificada com ácido sulfúrico e delaminação ao longo do plano 001 da amostra modificada com uréia. Os ajustes matemáticos definidos pelos parâmetros (K_L,K_f) das isotermas de adsorção, avaliação de C_e vs. Q_e, pH vs. Q_e ,Qmáx (sips) e Kd indicaram que a amostra S10H15 é a mais eficiente na adsorção de MoO₄^2-, com q_Max = 6,83 mg.L^-1.

Adsorção de íons metálicos em meio aquoso, etanólico e cetônico utilizando silsesquioxanos organofuncionalizados

Pós-graduação em Ciência dos Materiais - FEIS

Chitosan and alginate biopolymer membranes for remediation of contaminated water with herbicides

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

MOISTURE SORPTION CHARACTERISTICS OF PINEAPPLE PROCESSING WASTE: SHELL AND CENTRAL CYLINDER

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Iron oxides and quality of organic matter in sugarcane harvesting systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo eletroquímico e computacional de inibidores voláteis de corrosão adsorvidos sobre zinco

Pós-graduação em Química - IQ

Adsorção do corante luganil azul por espuma de poliuretano

The industrial development has created many environmental problems that can be observed through the changes in air, soil and water. The pollution of water bodies with compounds present in textile effluents cause beyond the visual pollution, changes in biological cycles, mainly by changing the process of photosynthesis. Due to these environmental implications it is necessary a treatment of livestock manure. The process of adsorption of the dye is a technique that has been successfully employed for effective removal of the color of the effluent. The purpose of this study was to investigate the application of a polyurethane foam plant of castor oil as an alternative adsorbent for removal of dyes in textile effluents. The study was conducted with the dye “luganil azul”, as adsorbent and the foam in a flexible manner and sprayed. It also investigated the influence of pH on the adsorption dye. The kinetic data were obtained, noting that the pH influence on adsorption. Adsorption isotherms of the dye in aqueous solution using the foam in a flexible manner also were determined experimentally.

Aplicabilidade das equações isotermas de Freundlich e Langmuir na interação biossortiva de corantes têxteis com Saccharomyces cerevisiae liofilizada

This paper presents a study of the applicability of adsorption isotherms, known as Langmuir and Freundlich isotherm, between the biosorptive interaction of yeast lyophilized Saccharomyces cerevisiae and textile dyes. To that end, we prepared stock solutions of the textile dyes Direct Red 23 and Direct Red 75 in the concentration of 1.000μg/mL and a yeast suspension at 2,5%. We did experiments for two cases, firstly for the case that we have a fix concentration of yeast at 0,500mg/mL and an variable concentration of dye range from40, 50, 60, 80 and 100μg/mL, then for the case that we fixed the concentration of dye at 100μg/mL and the yeast concentration was variable range from 0,250, 0,500, 0,750, 1,000, 1,250mg/mL. For the dye Direct Red 23 we did analysis in the pH 2,5, 4,5 and 6,5; for the Direct Red 75, we just did for the pH 2,5. We leave the dye solution in contact with the yeast for 2 hours at a constant temperature of 30°C and then centrifuged and analyzed the sample in a spectrophotometer and finally made and analysis of parameters for the removal and study of the isotherms. After the biosorption, was observed that for the Direct Red 23 in the pH 2,5 was needed 1,407mg/mL of yeast for total removal, while for the pH 4,5 was needed 8,806mg/mL and in pH 6,5 was 9,286mg/mL; for the Direct Red 75 in pH 2,5 was needed 1,337mg/mL. This difference can be explain by the adsorption isotherms, was observed that in the case when the yeast was fix when we had in a acid pH the behavior of the system was compatible with the Langmuir isotherm, and thus, an monolayer pattern. And that when we decrease the acidity of the medium the system became more compatible with a Freundlich isotherm, and thus, a multilayer pattern; for the case that the yeast was variable this is not much evident, however for the pH 2,5 she became compatible with a Langmuir isotherm... (Complete abstract click electronic access below)

Removal of dyes by lignocellulose adsorbents originating from biodiesel production

In this study, use was made of tucumã cake, in natura (TCN) and thermally treated (TCT), as potential alternative adsorbents for the adsorption of cationic and anionic dyes. The effects of the parameters: contact time, adsorbent: adsorbate mass ratio, and initial concentration of dye were analyzed. The adsorption isotherms were established from optimized adsorption parameters. The best conditions for adsorption were: equilibrium time of 7 h, concentration of 25 mg L 1 and ratio of 1:200 for the methylene blue dye; and pH 6.5, concentration of 25 mg L 1 and ratio of 1:200 for the congo red dye. The adsorption process was best represented by the Dubinin–Radushkevich and Sips isotherms. The kinetics of adsorption of the dyes were best described by the pseudo-second-order kinetic and Elovich models. TCT showed the best maximum adsorption capacity (Qm) for the methylene blue dye (63.92 mg g 1 ).

Estudo da atividade de água em co-produtos da indústria de sucos: sementes de maracujá, casca de laranja e cascas de manga

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Influence of alternative drying aids on water sorption of spray dried mango mix powders: a thermodynamic approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mapeamento do fósforo adsorvido por meio da cor e da suscetibilidade magnética do solo

The objective of this work was to evaluate the possibility of mapping adsorbed phosphorus through soil color and magnetic susceptibility. The experiment was done in a 380-ha sugarcane area, which included four types of Oxisols, with different texture and natural fertility. Two hundred and forty-one soil samples were collected at 0.00-0.25-m depth. The soil redness index was calculated from sample values of hue, value, and chroma, obtained with diffuse reflectance spectroscopy. Regression models were adjusted between adsorbed phosphorus and soil magnetic susceptibility or redness index. Data spatial dependence was evaluated with geostatistics. Magnetic susceptibility is significantly correlated to adsorbed phosphorus, which allows it to be used as a component in pedotransfer functions for indirect quantification of soil adsorbed phosphorus. The redness index and the magnetic susceptibility show spatial dependency with adsorbed phosphorus. Soil magnetic susceptibility and redness index, evaluated with diffuse reflectance spectroscopy, can aid in the mapping and identification of areas with different phosphorus adsorption potential.

Adsorção de cádmio em Latossolos sob vegetação de mata nativa e cultivados

Heavy metals are found naturally in soils at low concentrations, but their content may be increased by human activity, making them one of the barriers in management of tropical soils. These chemical elements can be found in the composition of organic and inorganic fertilizers, insecticides, fungicides, mine tailings, and urban waste, and may cause serious damage to the environment and human health. Thus, adsorption studies are essential in assessing the behavior of heavy metals in the soil. The objective of this study was to evaluate the influence of soil chemical, particle size, and mineralogical properties on adsorption of cadmium (Cd), evaluated by Langmuir and Freundlich models, in Latossolos (Oxisols) with or without human activity. Soil samples were collected from the surface layer, 0.00-0.20 m, and chemical, particle size, and mineralogical analyzes were performed. In the adsorption study, concentrations of 0, 5, 25, 50, 100, 200, 300, and 400 mu g L-1 of Cd were used in the form of Cd(NO3)(2). The empirical mathematical models of Langmuir and Freundlich were used for construction of adsorption isotherms. Data were analyzed by means of multivariate statistical techniques, Cluster Analysis and Principal Component Analysis. The data from the adsorption experiment showed a good fit to the Langmuir and Freundlich models. Soils with a lower goethite/hematite ratio and greater cation exchange capacity and pH, showed higher maximum adsorption capacity of Cd.