Establishments and products licensed under section 351 of the Public Health Service Act /

Description based on: June 1982.

Pharmaceutical compounding and dispensing

This is a detailed and practical guide to the theory and practice of extemporaneous compounding and dispensing, and a source of reference to extemporaneous formulae. Pharmacists have been responsible for compounding medicines for centuries and there is currently a dearth of current information on the topic, yet it is still taught in schools of pharmacy and required in community and hospital departments and by "specials" manufacturers and in development of new products in industry. This is a modern, detailed and practical guide to the theory and practice of extemporaneous compounding and dispensing, which will equip readers with the knowledge required for producing extemporaneous formulations safely and effectively.

The stability of pharmaceutical powders: effect of additives and coating

The decomposition of drugs in the solid state has been studied using aspirin and salsalate as models. The feasibility of using suspension systems for predicting the stability of these drugs in the solid state has been investigated.. It has been found that such systems are inappropriate in defining the effect of excipients on 'the decomposition of the active drug due to chqnges in the degradation pathway. Using a high performance liquid chromatographic method, magnesium stearate was shown to induce the formation of potentlally immunogenic products in aspirin powders. These products which included salicylsalicylic acid .and acetylsalicyclsalicylic acid were not detected in aspirin suspensions which had undergone the same extent of decomposition. By studying the effect of pH and of added excipients on the rate of decomposition of aspirin in suspension systems, it has been shown that excipients such as magnesium stearate containing magnesium oxide, most probably enhance the decomposition of both aspirin and salsalate by alkalinising the aqueous phase. In the solid state, pH effects produced by excipients appear to be relatively unimportant. Evidence is presented to suggest that the critical parameter is a depression in melting point induced by: the added excipient. Microscopical examination in fact showed the formation of clear liquid layers in aspirin samples containing added magnesium stearate but not in control samples. Kinetic equations which take into account both the diffusive barrier presented by the liquid films and the. geometry of the aspirin crystals were developed. Fitting of the .experimental data to these equations showed good agreement. with the postulated theory. Monitorjng of weight issues during the decomposition of aspirin revealed that in the solid systems studied where the bulk of the decomposition product sublimes, it is possible to estimate the extent of degradation from the residual weight, provided the initial weight is known. The corollary is that in such open systems, monitoring of decomposition products is inadequate for assessing the extent of decomposition. In addition to the magnesium stearate-aspirin system, mapyramine maleate-aspirin mixtures were used to model interactive systems. Work carried out in an attempt to stabilise such systems included microencapsulation and film coating. The protection obtained was dependent on the interactive species used. Gelatin for example appeared to stabilise aspirin against the adverse effects of magnesium stearate but increased its decomposition in the presence of mapyramine maleate.

EPCIS Event-Based traceability in pharmaceutical supply chains via automated generation of linked pedigrees

In this paper we show how event processing over semantically annotated streams of events can be exploited, for implementing tracing and tracking of products in supply chains through the automated generation of linked pedigrees. In our abstraction, events are encoded as spatially and temporally oriented named graphs, while linked pedigrees as RDF datasets are their specific compositions. We propose an algorithm that operates over streams of RDF annotated EPCIS events to generate linked pedigrees. We exemplify our approach using the pharmaceuticals supply chain and show how counterfeit detection is an implicit part of our pedigree generation. Our evaluation results show that for fast moving supply chains, smaller window sizes on event streams provide significantly higher efficiency in the generation of pedigrees as well as enable early counterfeit detection.

Antibacterial Activity of Extracellular Products from Cyanobacteria.

Cyanobacteria are photosynthetic prokaryotes that can be found in freshwater and marine environments as well as in soil. These organisms produce a variety of different biologically active compounds exhibiting anti-bacterial, anti-fungal and anti-cancer properties among others. In this study, cyanobacterial isolates were screened for their ability to produce extracellular antibacterial products. Cyanobacteria were isolated from fresh water and soil samples collected in the Pembroke Pines, FL area. Twenty- seven strains of cyanobacteria were isolated belonging to the following genera: Limnothrix, Nostoc, Fischerella, Anabaena, Pseudoanabaena, Lyngbya, Leptolyngbya, Tychonema, and Calothrix. Individual strains were grown in liquid culture in laboratory conditions. Following 14-day cultivation, the culture liquid was filtered and tested for activity against the following bacteria: Escherichia coli, Bacillus megatarium, Staphylococcus aureus, and Micrococcus luteus. Among all genera of cyanobacterial strains tested, Fischerella exhibited the greatest inhibitory activity. An attempt was made to isolate the active compound from the culture liquid of the active strains. Lipophilic extracts from culture liquid were obtained from three selected Fischerella strains. The extracts proved to have varying levels of activity against the tested bacteria. Inhibitory activity from all three Fischerella strains was detected against B. megatarium and M luteus. The only strain that was active against S. aureus was Fischerella sp. 114-12 while none of the extracts showed activity against E. coli. This kind of screening has potential pharmaceutical and agricultural benefits, including possible discovery of novel antibiotics.

Enhancing Knowledge Acquisition in Pharmaceutical Organisations based in Pakistan

Absorptive Capacity (ACAP) depicts the sequential order of activities connecting externally generated knowledge into an organisation; this involves a company’s ability to acquire new knowledge from an external source, assimilate and transform it, and eventually exploit it via its industrial processes and products/services. The sandwiched role of middle managers, being interlinked between decision makers and employees, has been argued as vital to organisational success. However, their role is often viewed as having conflicts astride management i.e. between employees and decision makers. This study, using a thematic analysis approach, explores and identifies the common and conflicting role of middle managers, as viewed by different respondents in organisational hierarchies. Results, based on a sample of 33 employees operating in the Pakistan Pharmaceutical sector, indicate that conflicting roles of middle managers also persist with more common roles in organisations.

Peptide Therapeutics and the Pharmaceutical Industry: Barriers Encountered Translating from the Laboratory to Patients

Peptides are receiving increasing interest as clinical therapeutics. These highly tunable molecules can be tailored to biocompatibility and biodegradability with simultaneously selective and potent therapeutic effects. Despite challenges regarding up-scaling and licensing of peptide products, their vast clinical potential is reflected in the 60 plus peptide-based therapeutics already on the market, and the further 500 derivatives currently in developmental stages. Peptides are proving effective for a multitude of disease states including: type 2 diabetes (controlled using the licensed glucagon-like peptide-1 receptor liraglutide); irritable bowel syndrome managed with linaclotide (currently at approval stages); acromegaly (treated with octapeptide somostatin analogues lanreotide and octreotide); selective or broad spectrum microbicidal agents such as the Gram-positive selective PTP-7 and antifungal heliomicin; anticancer agents including goserelin used as either adjuvant or for prostate and breast cancer,and the first marketed peptide derived vaccine against prostate cancer, sipuleucel-T. Research is also focusing on improving the biostability of peptides. This is achieved through a number of mechanisms ranging from replacement of naturally occurring L-amino acid enantiomers with D-amino acid forms, lipidation, peptidomimetics, N-methylation, cyclization and exploitation of carrier systems. The development of self-assembling peptides are paving the way for sustained release peptide formulations and already two such licensed examples exist, lanreotide and octreotide. The versatility and tunability of peptide-based products is resulting in increased translation of peptide therapies, however significant challenges remain with regard to their wider implementation. This review highlights some of the notable peptide therapeutics discovered to date and the difficulties encountered by the pharmaceutica lindustry in translating these molecules to the clinical setting for patient benefit, providing some possible solutions to the most challenging barriers. 

Refocusing regulatory exclusivities: Regulatory data protection and marketing exclusivity as forms of pharmaceutical innovation policy

Protection of innovation in the pharmaceutical industry has traditionally been realised through protection of inventions via patents. However, in the European Union regulatory exclusivities restricting market entry of generic products confer tailored, industry specific protection for final, marketable products. This paper retraces the protection conferred by the different forms of exclusivity and assesses them in the light of recent transparency policies of the European Medicines Agency. The purpose of the paper is to argue for rethinking the role of regulatory data as a key tool of innovation policy and for refocusing the attention from patents to the existing regulatory framework. After detailed assessment of the exclusivity regime, the paper identifies key areas of improvement calling for reassessment so as to promote better functioning of the regime as an incentive for accelerated innovation. While economic and public health analysis necessarily provide final answers as to necessity of reform, this paper provides a legal perspective to the issue, appraising the current regulatory framework and identifying areas for further analysis.

Use of aromatic and medicinal plants, drugs and herbal products in Bragança city

Herbal therapy is characterized by the use of aromatic and medicinal plants (AMP) in different pharmaceutical forms for therapeutic purposes. The present study aims to characterize the use of AMP, drugs and herbal products in Bragança city. For this, a cross-sectional study was conducted through application of a questionnaire to 404 subjects of both gender and aged between 18 and 89 years. AMP were therapeutically used by 53.7% mainly due “to be natural” (43.9%) while 33.8% use drugs and/ or herbal products mainly “because it is good for health” (53.5%). The AMP most used were Cidreira (n=149) and Camomila (n=117) and concerning drugs and/ or herbal products Valdispert® (n=48) and Daflon® 500 (n=41) were the most reported. Overall, the reported uses of AMP, drugs and herbal products were correct, according to the reported in literature. The use of AMP is motivated by self-knowledge (55.4%) while drugs and/ or herbal products are used mostly by medical prescription (44.1%). AMP were obtained by own cultivation (44.1%) and drug and/ or herbal products in pharmacies (89.0%). Of all users, about 90% not combined these products with conventional drugs and it was identified just one potential occurrence of drug interactions related with the use of Hipericão. The occurrence of adverse effects was noted after the use of AMP Sene (11.8%), Hipericão (9.1%) and Ginkgo Biloba (8.3%). The use of these products is a common practice among the residents of Bragança city, which use a wide diversity of AMP and plant-based products.

Reliability of graphite furnace atomic absorption spectrometry as alternative method for trace analysis of arsenic in natural medicinal products

Purpose: To evaluate the comparative efficiency of graphite furnace atomic absorption spectrometry (GFAAS) and hydride generation atomic absorption spectrometry (HGAAS) for trace analysis of arsenic (As) in natural herbal products (NHPs). Method: Arsenic analysis in natural herbal products and standard reference material was conducted using atomic absorption spectrometry (AAS), namely, hydride generation AAS (HGAAS) and graphite furnace (GFAAS). The samples were digested with HNO3–H2O2 in a ratio of 4:1 using microwaveassisted acid digestion. The methods were validated with the aid of the standard reference material 1515 Apple Leaves (SRM) from NIST Results: Mean recovery of three different samples of NHPs, using HGAAS and GFAAS, ranged from 89.3 - 91.4 %, and 91.7 - 93.0 %, respectively. The difference between the two methods was insignificant. A (P= 0.5), B (P=0.4) and C (P=0.88) Relative standard deviation (RSD) RSD, i.e., precision was 2.5 - 6.5 % and 2.3 - 6.7 % using HGAAS and GFAAS techniques, respectively. Recovery of arsenic in SRM was 98 and 102 % by GFAAS and HGAAS, respectively. Conclusion: GFAAS demonstrates acceptable levels of precision and accuracy. Both techniques possess comparable accuracy and repeatability. Thus, the two methods are recommended as an alternative approach for trace analysis of arsenic in natural herbal products.

A Highly Improved Method For Sensitive Determination Of Amitriptyline In Pharmaceutical Formulations Using An Unmodified Carbon Nanotube Electrode In The Presence Of Sulfuric Acid.

The present paper describes a novel, simple and reliable differential pulse voltammetric method for determining amitriptyline (AMT) in pharmaceutical formulations. It has been described for many authors that this antidepressant is electrochemically inactive at carbon electrodes. However, the procedure proposed herein consisted in electrochemically oxidizing AMT at an unmodified carbon nanotube paste electrode in the presence of 0.1 mol L(-1) sulfuric acid used as electrolyte. At such concentration, the acid facilitated the AMT electroxidation through one-electron transfer at 1.33 V vs. Ag/AgCl, as observed by the augmentation of peak current. Concerning optimized conditions (modulation time 5 ms, scan rate 90 mV s(-1), and pulse amplitude 120 mV) a linear calibration curve was constructed in the range of 0.0-30.0 μmol L(-1), with a correlation coefficient of 0.9991 and a limit of detection of 1.61 μmol L(-1). The procedure was successfully validated for intra- and inter-day precision and accuracy. Moreover, its feasibility was assessed through analysis of commercial pharmaceutical formulations and it has been compared to the UV-vis spectrophotometric method used as standard analytical technique recommended by the Brazilian Pharmacopoeia.

Use Of Experimental Design To Optimize A Triple-potential Waveform To Develop A Method For The Determination Of Streptomycin And Dihydrostreptomycin In Pharmaceutical Veterinary Dosage Forms By Hplc-pad.

An HPLC-PAD method using a gold working electrode and a triple-potential waveform was developed for the simultaneous determination of streptomycin and dihydrostreptomycin in veterinary drugs. Glucose was used as the internal standard, and the triple-potential waveform was optimized using a factorial and a central composite design. The optimum potentials were as follows: amperometric detection, E1=-0.15V; cleaning potential, E2=+0.85V; and reactivation of the electrode surface, E3=-0.65V. For the separation of the aminoglycosides and the internal standard of glucose, a CarboPac™ PA1 anion exchange column was used together with a mobile phase consisting of a 0.070 mol L(-1) sodium hydroxide solution in the isocratic elution mode with a flow rate of 0.8 mL min(-1). The method was validated and applied to the determination of streptomycin and dihydrostreptomycin in veterinary formulations (injection, suspension and ointment) without any previous sample pretreatment, except for the ointments, for which a liquid-liquid extraction was required before HPLC-PAD analysis. The method showed adequate selectivity, with an accuracy of 98-107% and a precision of less than 3.9%.

Gut Bacteria Products Prevent Aki Induced By Ischemia-reperfusion.

Short-chain fatty acids (SCFAs) are fermentation end products produced by the intestinal microbiota and have anti-inflammatory and histone deacetylase-inhibiting properties. Recently, a dual relationship between the intestine and kidneys has been unraveled. Therefore, we evaluated the role of SCFA in an AKI model in which the inflammatory process has a detrimental role. We observed that therapy with the three main SCFAs (acetate, propionate, and butyrate) improved renal dysfunction caused by injury. This protection was associated with low levels of local and systemic inflammation, oxidative cellular stress, cell infiltration/activation, and apoptosis. However, it was also associated with an increase in autophagy. Moreover, SCFAs inhibited histone deacetylase activity and modulated the expression levels of enzymes involved in chromatin modification. In vitro analyses showed that SCFAs modulated the inflammatory process, decreasing the maturation of dendritic cells and inhibiting the capacity of these cells to induce CD4(+) and CD8(+) T cell proliferation. Furthermore, SCFAs ameliorated the effects of hypoxia in kidney epithelial cells by improving mitochondrial biogenesis. Notably, mice treated with acetate-producing bacteria also had better outcomes after AKI. Thus, we demonstrate that SCFAs improve organ function and viability after an injury through modulation of the inflammatory process, most likely via epigenetic modification.

Molecularly Imprinted Solid Phase Extraction Of Fluconazole From Pharmaceutical Formulations.

This work encompasses a direct and coherent strategy to synthesise a molecularly imprinted polymer (MIP) capable of extracting fluconazole from its sample. The MIP was successfully prepared from methacrylic acid (functional monomer), ethyleneglycoldimethacrylate (crosslinker) and acetonitrile (porogenic solvent) in the presence of fluconazole as the template molecule through a non-covalent approach. The non-imprinted polymer (NIP) was prepared following the same synthetic scheme, but in the absence of the template. The data obtained from scanning electronic microscopy, infrared spectroscopy, thermogravimetric and nitrogen Brunauer-Emmett-Teller plot helped to elucidate the structural as well as the morphological characteristics of the MIP and NIP. The application of MIP as a sorbent was demonstrated by packing it in solid phase extraction cartridges to extract fluconazole from commercial capsule samples through an offline analytical procedure. The quantification of fluconazole was accomplished through UPLC-MS, which resulted in LOD≤1.63×10(-10) mM. Furthermore, a high percentage recovery of 91±10% (n=9) was obtained. The ability of the MIP for selective recognition of fluconazole was evaluated by comparison with the structural analogues, miconazole, tioconazole and secnidazole, resulting in percentage recoveries of 51, 35 and 32%, respectively.