976 resultados para neutron detector
Resumo:
[ES]El objetivo de este trabajo es analizar el montaje de un contador proporcional de radiación para su uso en una red de vigilancia radiológica ambiental desde su diseño básico hasta su puesta en marcha. Se realizará un análisis de las razones que nos han llevado a elegir este tipo de contadores de ionización gaseosa (frente a otros tipos), para llegar a la conclusión de que son los más adecuados para la vigilancia radiológica ambiental. Este análisis describirá la solución a la que se ha llegado para construir un contador con los medios al alcance y el porqué de su diseño concreto, así como la metodología de trabajo que se ha seguido para la obtención del mismo. Basándonos en suposiciones teóricas derivadas del análisis geométrico de la instrumentación para la obtención de resultados previsibles, se realizará una verificación mediante ensayos técnicos en el laboratorio. Se presupuestará el material utilizado y las horas requeridas, para llevar una cuenta de lo que le ha costado al departamento y lo que le habría costado en caso de no poseer la instrumentación utilizada. Después de realizar diversos test relacionados con la instrumentación electrónica, se procederá a obtener unas conclusiones derivadas de los ensayos en el laboratorio para su posterior comparación con las estimaciones teóricas. En el anexo I se encuentran los planos de diseño que se han realizado y en el anexo II los resultados finales obtenidos de los ensayos.
Resumo:
The pulsed neutron technique has been used to investigate the decay of thermal neutrons in two adjacent water-borated water finite media. Experiments were performed with a 6x6x6 inches cubic assembly divided in two halves by a thin membrane and filled with pure distilled water on one side and borated water on the other side.
The fundamental decay constant was measured versus the boric acid concentration in the poisoned medium. The experimental results showed good agreement with the predictions of the time dependent diffusion model. It was assumed that the addition of boric acid increases the absorption cross section of the poisoned medium without affecting its diffusion properties: In these conditions, space-energy separability and the concept of an “effective” buckling as derived from diffusion theory were introduced. Their validity was supported by the experimental results.
Measurements were performed with the absorption cross section of the poisoned medium increasing gradually up to 16 times its initial value. Extensive use of the IBM 7090-7094 Computing facility was made to analyze properly the decay data (Frantic Code). Attention was given to the count loss correction scheme and the handling of the statistics involved. Fitting of the experimental results into the analytical form predicted by the diffusion model led to
Ʃav = 4721 sec-1 (±150)
Do = 35972 cm2sec-1 (±800) for water at 21˚C
C (given) = 3420 cm4sec-1
These values, when compared with published data, show that the diffusion model is adequate in describing the experiment.
Resumo:
An exact solution to the monoenergetic Boltzmann equation is obtained for the case of a plane isotropic burst of neutrons introduced at the interface separating two adjacent, dissimilar, semi-infinite media. The method of solution used is to remove the time dependence by a Laplace transformation, solve the transformed equation by the normal mode expansion method, and then invert to recover the time dependence.
The general result is expressed as a sum of definite, multiple integrals, one of which contains the uncollided wave of neutrons originating at the source plane. It is possible to obtain a simplified form for the solution at the interface, and certain numerical calculations are made there.
The interface flux in two adjacent moderators is calculated and plotted as a function of time for several moderator materials. For each case it is found that the flux decay curve has an asymptotic slope given accurately by diffusion theory. Furthermore, the interface current is observed to change directions when the scattering and absorption cross sections of the two moderator materials are related in a certain manner. More specifically, the reflection process in two adjacent moderators appears to depend initially on the scattering properties and for long times on the absorption properties of the media.
This analysis contains both the single infinite and semi-infinite medium problems as special cases. The results in these two special cases provide a check on the accuracy of the general solution since they agree with solutions of these problems obtained by separate analyses.
Resumo:
The Q values and 0o cross sections of (He3, n) reactions forming seven proton-rich nuclei have been measured with accuracies varying from 6 to 18 keV. The Q values (in keV) are: Si26 (85), S30 (-573), Ar34 (-759), Ti42 (-2865), Cr48 (5550), Ni56 (4513) and Zn60 (818). At least one excited state was found for all but Ti42. The first four nuclei complete isotopic spin triplets; the results obtained agree well with charge-symmetry predictions. The last three, all multiples of the α particle, are important in the α and e-process theories of nucleo-synthesis in stars. The energy available for β decay of these three was found by magnetic spectrometer measurements of the (He3, p) Q values of reactions leading to V48, Co56, and Cu60. Many excited states were seen: V48 (3), Co56 (15), Cu60 (23). The first two states of S30 are probably 0+ and 2+ from (He3, n) angular distribution measurements. Two NaI γ-ray measurements are described: the decay of Ar34 (measured Ƭ1/2 = 1.2 ± 0.3s) and the prompt γ-ray spectrum from Fe54(He3, nγ)Ni56. Possible collective structure in Ni56 and Ca40, both doubly magic, is discussed.
The (He3, n) neutron energy and yield measurements utilized neutron-induced nuclear reactions in a silicon semiconductor detector. Cross sections for the most important detection processes, Si28 (n, α) Mg25 and Si28 (n, p) Al28, are presented for reactions leading to the first four states of both residual nuclei for neutron energies from 7.3 to 16.4 MeV. Resolution and pulse-height anomalies associated with recoil Mg25 and Al28 ions are discussed. The 0o cross section for Be9 (α, n) C12, used to provide calibration neutrons, has been measured with a stilbene spectrometer for no (5.0 ≤ Eα ≤ 12 MeV), n1 (4.3 ≤ Eα ≤ 12.0 MeV) and n2 (6.0 ≤ Eα ≤ 10.1 MeV). Resonances seen in the no yield may correspond to nine new levels in C13.
Resumo:
Recent theoretical developments in the reggeization of inelastic processes involving particles with high spin are incorporated into a model of vector meson production. A number of features of experimental differential cross sections and density matrices are interpreted in terms of this model.
The method chosen for reggeization of helicity amplitudes first separates kinematic zeros and singularities from the parity-conserving amplitudes and then applies results of Freedman and Wang on daughter trajectories to the remaining factors. Kinematic constraints on helicity amplitudes at t = 0 and t = (M – MΔ)2 are also considered.
It is found that data for reactions of types πN→VN and πN→VΔ are consistent with a model of this type in which all kinematic constraints at t = 0 are satisfied by evasion (vanishing of residue functions). As a quantitative test of the parametrization, experimental differential cross sections of vector meson production reactions dominated by pion trajectory exchange are compared with the theory. It is found that reduced residue functions are approximately constant, once the kinematic behavior near t = (M – MΔ)2 has been removed.
The alternative possibility of conspiracy between amplitudes is also discussed; and it is shown that unless conspiracy is present, some amplitudes allowed by angular momentum conservation will not contribute with full strength in the forward direction. An example, γp→π+n in which the data for dσ/dt indicate conspiracy, is studied in detail.
Resumo:
Qens/wins 2014 - 11th International Conference on Quasielastic Neutron Scattering and 6th International Workshop on Inelastic Neutron Spectrometers / editado por:Frick, B; Koza, MM; Boehm, M; Mutka, H
Resumo:
O Compact Muon Solenoid (CMS) é um dos principais detectores instalados no LHC que possibilita o estudo de diferentes aspectos da Física, indo do Modelo Padrão à matéria escura. Esse detector de propósito geral, foi construído para ser capaz de medir múons com uma grande precisão e todos os seus subdetectores foram construídos com uma alta granularidade, tornando possível identificar e caracterizar as propriedades cinemáticas das partículas finais da colisão. O algoritmo de reconstrução de eventos inclui a identificação de jatos, ou seja, é possível identificar a assinatura da produção de pártons na colisão e a medida de seções de choque da produção de muitos jatos é um dos métodos para se explorar as contribuições da Cromodinâmica Quântica (Quantum Chromodynamics - QCD) perturbativa, permitindo avaliar as previsões implementadas nas simulações de eventos. Tendo em vista a caracterização de processos relacionados com a QCD em colisões de próton-próton a uma energia do centro de massa de 7 TeV, é apresentada a medida da seção de choque da produção inclusiva de multijatos no CMS. Para realizar essa medida foram utilizados dados reais coletados em 2010, onde não se apresentava muitas colisões por cruzamento de pacote, com uma luminosidade integrada de L = 2,869 pb-1 e utilizando jatos que estão em quase todo o espaço de fase acessível em pseudorapidez |n|≤ 4,8 e momentum transverso pT ≥ 30 GeV/ c2. Desse resultado foram removidos os efeitos de detecção comparado com predições simuladas.