Compliance Program report of findings: FY 79 pesticides and metals in Fish Program (7305.007)

Because fish bioaccumulate* certain chemicals, levels of chemical contaminants in their edible portion must be closely monitored. In recent years, FDA has conducted several surveys designed to determine the occurrence and levels of selected chemicals or groups of chemicals in fish. Previous fish surveillance programs included the Mercury in Wholesale Fish Survey (FY 71), the FY 73 and 74 Comprehensive Fish Surveys, the Canned Tuna Program (FY 75), the Kepone and Mirex Contamination Program (FY 77), and the FY 77 Mercury in Swordfish Program. In addition, recent Compliance Programs for Pesticides and Metals in Foods and Pesticides, Metals, and Industrial Chemicals in Animal Feed have specified coverage of fish and fish products. Because of previous findings and the sustained high level of fish imported into the United States, a separate compliance program dealing solely with chemical contaminants in fish was initiated by the FDA Bureau of Foods in FY 78. The program includes all domestic and imported fish coverage except that directed by the Bureau of Veterinary Medicine for animal feed components derived from fishery products. The earlier surveys indicated that "bottom feeder" species such as catfish generally had the highest levels of pesticides and polychlorinated biphenyls (PCBs). For this reason, coverage at these species has been emphasized. Similarly, tuna has received special attention because it is the most prevalent fish in the U.S. diet and because of potential problems with mercury. Halibut, swordfish, and snapper also were emphasized in the sampling because of potential problems with mercury levels determined in previous years. The findings in this program were used in detecting emerging problems in fish and directing FDA efforts to deal with them. Care must be exercised in drawing conclusions about trends from the data because this Compliance Program was not statistically designed. Sampling objectives and sources may vary from year to year; thus the results are not directly comparable.

Toxicity of heavy metals to brine shrimp Artemia

Bioassay were carried out on 48h cultured nauplii of brine shrimp Artemia by exposing them to seven trace elements viz. copper (Cu), zinc (Zn), cadmium (Cd), nickel (Ni), lead (Pb), iron (Fe) and manganese (Mn). Synergistic effects of all these elements and additive effects of Cu and Zn, Cd and Pb, and Ni and Fe were also investigated. Comparatively, the degree of toxicity for compound bioassays was higher than individual simple tests. The values were averaged and the expected median lethal concentration [LC sub(50)] of tested heavy metals was obtained by probit analysis on the basis of cumulative numbers of dead organisms after 24 and 48h. The order of toxicity of the metals to Artemia was Pb>Cd>Cu>Ni>Zn>Fe>Mn. Potency ratios of the seven metals were also calculated. The 24 and 48h variations obtained in LC sub(50) values were significantly different and relative implications of these are discussed.

Concentration of toxic metals in benthic organisms off Bombay coast

Concentration of toxic metals namely Zn, Cu, Fe, Cd and Pb in the marine benthos off Bombay Coast, Maharashtra (India) was estimated. Maximum concentration of Zn, Fe and Pb was from the organisms of Thana Creek. Higher concentration of Cu was encountered in benthic organisms off Versova. Cd was detected in some organisms and was maximum in the organisms collected from Mahim.

Heavy metals pollution in the coastal environment of Karachi

The marine environment near Karachi, particularly the Baba channel, Chari Kundi channel and Manora channel have been found contaminated with industrial effluents discharged by Malir and Lyari rivers, since they carry a high concentration of toxic heavy metals viz. Pb, Zn, Cu and Mn emanating from the industrial area and are received and discharged by the Lyari river. Out of 60 seawater samples collected from the above mentioned areas, Pb was present in 55 samples and Zn in 58 samples. The concentration of Pb was between 0.04 and 59.2ppm and the concentration of Zn was between 0.05 and 1.9ppm. Similarly all the 60 sludge samples collected from Lyari outfall and its adjoining area have been found to contain Pb and Zn in alarmingly high concentratios, which for Pb was between 15.4 and 3209.9ppm while for Zn was between 87 and 111.3ppm. Cu and Mn were also found in all the above samples.

INFLUENCE OF ATMOSPHERIC HUMIDITY ON THE ABRASIVE WEAR OF METALS.

A pin-on-disc apparatus has been used to obtain continuous simultaneous measurements of the wear and friction (sliding force) behaviour of metals on bonded silicon carbide abrasive paper under conditions of controlled humidity. Iron, mild steel, and copper exhibit qualitatively similar wear behaviour; the wear rate decreases progressively with the number of passes over the same track. In contrast, the wear rate of titanium remains constant. Variation in atmospheric humidity has little effect on the wear rates of copper or titanium, although a slight effect was found in mild steel and iron. Refs.

Acute toxicity of four heavy metals to Sphaeroma walkeri and Ciroiana bovina (Crustacea:Isopoda)

The median lethal concentrations (LC50) of two Isopoda species exposed to each tested metal (Cu. Co, Cd and Zn) in static tests for different exposure periods are quite variable depending on the tested metal The LC50 values for Sphaeroma walkeri after 24 hours exposure to Cu and Co were estimated graphically to be 11.20 and 7.00 mg/1 respectively. The correspoding values for Cirolana bovina exposed to Cu, Co, Cd and Zn were 3.60, 11.0, 3.80 and 4.80 mg/1 respectively. For 2 days the LC50 of S. walkeri exposed to Cd was 5.60 mg/l, but it was 10.10 mg/l for 3 days exposure to Zn. After prolonged exposure the LC50 values decreased proportionally with the exposure duration of the test the percentages of surviving animals demonstrated a progressive decrease with increasing concentratins as a main factor from the analysis of variance (ANOV A). The sensitivity of adult S. walkeri exposed to the four heavy metals for different exposure times ranked: Cd>Co>Zn>Cu. Cirolana bovina appeared to be more sensitive to Cu. Cd and Zn than to Co. Species in order of increasing sensitivity is C. bovina more than S. walker.

Concentration and distribution of heavy metals (lead, cadmium, chromium, copper, nickel, zinc) in Karachi shore and offshore sediments

A study to measure the heavy metal pollution level in the sediment of coastal and offshore area indicates that high concentration of heavy metals were found around Manora channel and eastern coast of Karachi. In comparison with coastal areas, relatively low concentration of heavy metals was recorded in the offshore area. The result shows that sewage and industrial wastes are the main source of heavy metal pollution in the coastal area. The concentration of heavy metals in the sediments is as follows: Chromium 10.4-33.69, nickel 13.3-47.6, lead 10.0-39.04, cadmium 0.08-0.21, zinc 7.4-73.2 and copper 9.44-18.56 mg/kg. In the offshore areas strong correlation was observed between copper and organic carbon, and calcium carbonate and cadmium. In the shore area such correlation has been recorded among nickel, chromium, zinc, and chromium and copper. The Karachi. coast is viewed as moderately polluted when compared to other continental coastal areas.