Chemical and biological properties of phosphorus-fertilized soil under legume and grass cover (Cerrado region, Brazil)

The use of cover crops has been suggested as an effective method to maintain and/or increase the organic matter content, while maintaining and/or enhancing the soil physical, chemical and biological properties. The fertility of Cerrado soils is low and, consequently, phosphorus levels as well. Phosphorus is required at every metabolic stage of the plant, as it plays a role in the processes of protein and energy synthesis and influences the photosynthetic process. This study evaluated the influence of cover crops and phosphorus rates on soil chemical and biological properties after two consecutive years of common bean. The study analyzed an Oxisol in Selvíria (Mato Grosso do Sul, Brazil), in a randomized block, split plot design, in a total of 24 treatments with three replications. The plot treatments consisted of cover crops (millet, pigeon pea, crotalaria, velvet bean, millet + pigeon pea, millet + crotalaria, and millet + velvet bean) and one plot was left fallow. The subplots were represented by phosphorus rates applied as monoammonium phosphate (0, 60 and 90 kg ha-1 P2O5). In August 2011, the soil chemical properties were evaluated (pH, organic matter, phosphorus, potential acidity, cation exchange capacity, and base saturation) as well as biological variables (carbon of released CO2, microbial carbon, metabolic quotient and microbial quotient). After two years of cover crops in rotation with common bean, the cover crop biomass had not altered the soil chemical properties and barely influenced the microbial activity. The biomass production of millet and crotalaria (monoculture or intercropped) was highest. The biological variables were sensitive and responded to increasing phosphorus rates with increases in microbial carbon and reduction of the metabolic quotient.

Popping expansion and yield responses of popcorn cultivars under different row spacings and plant populations

The objective of this work was to evaluate the agronomic traits and the popping expansion index of three Brazilian popcorn cultivars under different row spacings and plant populations. The trials were performed during two crop seasons, under field conditions. The experimental design used was a randomized complete block, in a split-split plot, with 27 treatments and four replicates. Treatments were represented in a triple factorial arrangement: three row spacings (0.40, 0.60, and 0.80 m), three plant populations (40,000, 60,000, and 80,000 plants per hectare), and three popcorn cultivars (IAC-TC 01, IAC 12, and Zelia). The increase in plant population causes a reduction in the number of grains per ear, lower prolificacy, and grain weight loss. Cultivar grain yield is affected by row spacing and popcorn plant population. Cultivar IAC 12 shows highest grain yield under row spacings of 0.40 and 0.60 m and plant population between 60,000 and 80,000 plants per hectare. The popping expansion index is not affected by row spacing or plant population.

Architectures and design patterns for functional design of logic control and diagnostics in industrial automation

Recently in most of the industrial automation process an ever increasing degree of automation has been observed. This increasing is motivated by the higher requirement of systems with great performance in terms of quality of products/services generated, productivity, efficiency and low costs in the design, realization and maintenance. This trend in the growth of complex automation systems is rapidly spreading over automated manufacturing systems (AMS), where the integration of the mechanical and electronic technology, typical of the Mechatronics, is merging with other technologies such as Informatics and the communication networks. An AMS is a very complex system that can be thought constituted by a set of flexible working stations, one or more transportation systems. To understand how this machine are important in our society let considerate that every day most of us use bottles of water or soda, buy product in box like food or cigarets and so on. Another important consideration from its complexity derive from the fact that the the consortium of machine producers has estimated around 350 types of manufacturing machine. A large number of manufacturing machine industry are presented in Italy and notably packaging machine industry,in particular a great concentration of this kind of industry is located in Bologna area; for this reason the Bologna area is called “packaging valley”. Usually, the various parts of the AMS interact among them in a concurrent and asynchronous way, and coordinate the parts of the machine to obtain a desiderated overall behaviour is an hard task. Often, this is the case in large scale systems, organized in a modular and distributed manner. Even if the success of a modern AMS from a functional and behavioural point of view is still to attribute to the design choices operated in the definition of the mechanical structure and electrical electronic architecture, the system that governs the control of the plant is becoming crucial, because of the large number of duties associated to it. Apart from the activity inherent to the automation of themachine cycles, the supervisory system is called to perform other main functions such as: emulating the behaviour of traditional mechanical members thus allowing a drastic constructive simplification of the machine and a crucial functional flexibility; dynamically adapting the control strategies according to the different productive needs and to the different operational scenarios; obtaining a high quality of the final product through the verification of the correctness of the processing; addressing the operator devoted to themachine to promptly and carefully take the actions devoted to establish or restore the optimal operating conditions; managing in real time information on diagnostics, as a support of the maintenance operations of the machine. The kind of facilities that designers can directly find on themarket, in terms of software component libraries provides in fact an adequate support as regard the implementation of either top-level or bottom-level functionalities, typically pertaining to the domains of user-friendly HMIs, closed-loop regulation and motion control, fieldbus-based interconnection of remote smart devices. What is still lacking is a reference framework comprising a comprehensive set of highly reusable logic control components that, focussing on the cross-cutting functionalities characterizing the automation domain, may help the designers in the process of modelling and structuring their applications according to the specific needs. Historically, the design and verification process for complex automated industrial systems is performed in empirical way, without a clear distinction between functional and technological-implementation concepts and without a systematic method to organically deal with the complete system. Traditionally, in the field of analog and digital control design and verification through formal and simulation tools have been adopted since a long time ago, at least for multivariable and/or nonlinear controllers for complex time-driven dynamics as in the fields of vehicles, aircrafts, robots, electric drives and complex power electronics equipments. Moving to the field of logic control, typical for industrial manufacturing automation, the design and verification process is approached in a completely different way, usually very “unstructured”. No clear distinction between functions and implementations, between functional architectures and technological architectures and platforms is considered. Probably this difference is due to the different “dynamical framework”of logic control with respect to analog/digital control. As a matter of facts, in logic control discrete-events dynamics replace time-driven dynamics; hence most of the formal and mathematical tools of analog/digital control cannot be directly migrated to logic control to enlighten the distinction between functions and implementations. In addition, in the common view of application technicians, logic control design is strictly connected to the adopted implementation technology (relays in the past, software nowadays), leading again to a deep confusion among functional view and technological view. In Industrial automation software engineering, concepts as modularity, encapsulation, composability and reusability are strongly emphasized and profitably realized in the so-calledobject-oriented methodologies. Industrial automation is receiving lately this approach, as testified by some IEC standards IEC 611313, IEC 61499 which have been considered in commercial products only recently. On the other hand, in the scientific and technical literature many contributions have been already proposed to establish a suitable modelling framework for industrial automation. During last years it was possible to note a considerable growth in the exploitation of innovative concepts and technologies from ICT world in industrial automation systems. For what concerns the logic control design, Model Based Design (MBD) is being imported in industrial automation from software engineering field. Another key-point in industrial automated systems is the growth of requirements in terms of availability, reliability and safety for technological systems. In other words, the control system should not only deal with the nominal behaviour, but should also deal with other important duties, such as diagnosis and faults isolations, recovery and safety management. Indeed, together with high performance, in complex systems fault occurrences increase. This is a consequence of the fact that, as it typically occurs in reliable mechatronic systems, in complex systems such as AMS, together with reliable mechanical elements, an increasing number of electronic devices are also present, that are more vulnerable by their own nature. The diagnosis problem and the faults isolation in a generic dynamical system consists in the design of an elaboration unit that, appropriately processing the inputs and outputs of the dynamical system, is also capable of detecting incipient faults on the plant devices, reconfiguring the control system so as to guarantee satisfactory performance. The designer should be able to formally verify the product, certifying that, in its final implementation, it will perform itsrequired function guarantying the desired level of reliability and safety; the next step is that of preventing faults and eventually reconfiguring the control system so that faults are tolerated. On this topic an important improvement to formal verification of logic control, fault diagnosis and fault tolerant control results derive from Discrete Event Systems theory. The aimof this work is to define a design pattern and a control architecture to help the designer of control logic in industrial automated systems. The work starts with a brief discussion on main characteristics and description of industrial automated systems on Chapter 1. In Chapter 2 a survey on the state of the software engineering paradigm applied to industrial automation is discussed. Chapter 3 presentes a architecture for industrial automated systems based on the new concept of Generalized Actuator showing its benefits, while in Chapter 4 this architecture is refined using a novel entity, the Generalized Device in order to have a better reusability and modularity of the control logic. In Chapter 5 a new approach will be present based on Discrete Event Systems for the problemof software formal verification and an active fault tolerant control architecture using online diagnostic. Finally conclusive remarks and some ideas on new directions to explore are given. In Appendix A are briefly reported some concepts and results about Discrete Event Systems which should help the reader in understanding some crucial points in chapter 5; while in Appendix B an overview on the experimental testbed of the Laboratory of Automation of University of Bologna, is reported to validated the approach presented in chapter 3, chapter 4 and chapter 5. In Appendix C some components model used in chapter 5 for formal verification are reported.

Foliar fungal pathogens and grassland biodiversity

By attacking plants, herbivorous mammals, insects, and belowground pathogens are known to play an important role in maintaining biodiversity in grasslands. Foliar fungal pathogens are ubiquitous in grassland ecosystems, but little is known about their role as drivers of community composition and diversity. Here we excluded foliar fungal pathogens from perennial grassland by using fungicide to determine the effect of natural levels of disease on an otherwise undisturbed plant community. Importantly, we excluded foliar fungal pathogens along with rabbits, insects, and mollusks in a full factorial design, which allowed a comparison of pathogen effects along with those of better studied plant enemies. This revealed that fungal pathogens substantially reduced aboveground plant biomass and promoted plant diversity and that this especially benefited legumes. The scale of pathogen effects on productivity and biodiversity was similar to that of rabbits and insects, but different plant species responded to the exclusion of the three plant enemies. These results suggest that theories of plant coexistence and management of biodiversity in grasslands should consider foliar fungal pathogens as potentially important drivers of community composition.

Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

Balancing management and preservation of mediterranean scattered oak woodlands (Dehesas) in human-dominated landscapes

Los sistemas agroforestales mediterráneos tienen una gran importancia ecológica y socioeconómica, y mantienen altos valores medioambientales y de diversidad biológica a la vez que producen importantes servicios ecosistémicos. Estos sistemas han sido testigos de diversos cambios rápidos y drásticos en su gestión y aprovechamiento durante el último siglo. La mayor parte de la investigación desarrollada en esta tesis doctoral ha sido llevada a cabo en las dehesas españolas. Esta tesis nos muestra: i) la evidencia de la existencia de un cambio global del estrato arbóreo y del manejo del pastoreo en el todo el área de distribución de la dehesa durante los últimos 60 años; ii) la importancia del papel que juega el arbolado disperso y el adecuado manejo del ganado en la mejora de la producción, calidad y diversidad de las comunidades herbáceas, que a su vez, un pasto herbáceo bien desarrollado es importante para la rentabilidad del sistema, evaluando estos efectos bajo distintos escenarios de clima y calidad de estación; y iii) la evidencia de la falta de regeneración en sistemas agroforestales mediterráneos bajo distintos tipos de manejo del pastoreo, y además se evalúa el crecimiento y desarrollo de las pocas plántulas existentes que serán las que aseguren la viabilidad y persistencia y de estos sistemas. El arbolado disperso de estos sistemas ha experimentado una reducción importante en su densidad arbórea y fracción de cabida cubierta durante el periodo entre 1950-1980 donde tuvieron lugar importantes transformaciones en la actividad agropecuaria. La cabaña ganadera de ovino disminuyó drásticamente en los años 70 en comparación a la de bovino que desde entonces ha aumentado progresivamente hasta la actualidad. Por otro lado, el mismo tipo de manejo del ganado doméstico (especialmente bovino) durante bastante tiempo (mínimo 30 años) provocó una reducción significativa de la densidad de las plántulas. Además la probabilidad de ocurrencia y la intensidad de daños por herbivoría fue mayor bajo pastoreo bovino (con daños más intensos y consistentes) que bajo pastoreo ovino o sin pastoreo doméstico (presencia de ciervos). También el patrón de crecimiento de las plantas jóvenes estuvo afectado por el tipo de manejo, generando plántulas achaparradas en el caso del bovino y plántulas esbeltas favoreciendo el crecimiento en altura en el caso del ovino. La presencia de un arbolado disperso generó una mayor diversidad y variación en la producción de las comunidades herbáceas según las condiciones de disponibilidad de agua. Especialmente, el ecotono como microhábitat sostuvo altos valores de diversidad herbácea. La presencia del ganado bajo pastoreo continuo de intensidad moderada a alta, especialmente el bovino, incrementó los rendimientos de producción y diversidad del estrato herbáceo. Los resultados de esta tesis nos muestran la importancia que tiene la existencia de un equilibrio entre la producción y la conservación de los sistemas agroforestales mediterráneos para obtener una producción sostenible de servicios ecosistémicos mientras se asegura la perpetuación del sistema a largo plazo. Es crucial diseñar planes de gestión incorporando objetivos de conservación que integren técnicas silvopastorales apropiadas para poder aplicar en los sistemas agroforestales mediterráneos. ABSTRACT Mediterranean scattered oak woodlands have great ecological and socio-economic importance, supporting high environmental and amenity values, and relatively rich biological diversity while producing important ecosystem services. They have been witnesses of different and fast changes developed in the last century. Most of the research developed in this dissertation has conducted within dehesas. This thesis provides: i) the global change evidence of the tree layer and grazing management experienced in the land-use range of a Mediterranean scattered oak woodland (dehesa) over the last 60 years; ii) the important role of scattered trees and adequate management grazing in the improvement of grassland yield, quality and diversity - which it is important, in turn, for the system profitability - under different climate scenarios and site quality; and iii) the lack of oak regeneration evidence under some given representative management regimes and how is the growth development of these plants to assure the viability and persistence of Mediterranean scattered oak woodlands. Tree layer experienced a significant reduction in dehesas during 1950-1980 period where the highest human impacts took place. Sheep herd decreased drastically during the 1970s and, in contrast, cattle have been increasing gradually since then. On the other hand, same livestock grazing management (especially cattle) during long time (minimum 30 years) within Mediterranean scattered oak woodlands reduced strongly the density of young oak plants and showed high probability of herbivory occurrence and intensity. Young plant growth pattern was greatly modified by livestock. Cattle grazing generated stunted plants and sheep grazing generated slender plants favoring the height growth. Microsites created by large trees modified the herbaceous yield according the water availability of the year and generated high plant diversity within herbaceous communities. Especially, ecotone microsite supported high values of herbaceous diversity. The presence of livestock species increased the herbaceous yield and maintained a more diverse community under continuous grazing at both moderate and high intensities; especially cattle. Thus, around the influence of scattered trees there is a high amount of different interactions among livestock, trees and grasslands maintaining and enhancing the quality of whole dehesa system. The results of this thesis highlight how important is balancing management and preservation of Mediterranean scattered oak woodlands to obtain the optimum ecosystem services while the system conservation is assured for a long-term. It is crucial to design management plans with conservation goals that include appropriate silvopastoral practices in Mediterranean scattered oak woodlands.

The design and engineering of a reactor test facility for thermal processing of biomass

This thesis describes the design and engineering of a pressurised biomass gasification test facility. A detailed examination of the major elements within the plant has been undertaken in relation to specification of equipment, evaluation of options and final construction. The retrospective project assessment was developed from consideration of relevant literature and theoretical principles. The literature review includes a discussion on legislation and applicable design codes. From this analysis, each of the necessary equipment units was reviewed and important design decisions and procedures highlighted and explored. Particular emphasis was placed on examination of the stringent demands of the ASME VIII design codes. The inter-relationship of functional units was investigated and areas of deficiency, such as biomass feeders and gas cleaning, have been commented upon. Finally, plant costing was summarized in relation to the plant design and proposed experimental programme. The main conclusion drawn from the study is that pressurised gasification of biomass is far more difficult and expensive to support than atmospheric gasification. A number of recommendations have been made regarding future work in this area.

An interdisciplinary approach to designing and evaluating a hybrid solar-biomass power plant

Purpose: Energy security is a major concern for India and many rural areas remain un-electrified. Thus, innovations in sustainable technologies to provide energy services are required. Biomass and solar energy in particular are resources that are widely available and underutilised in India. This paper aims to provide an overview of a methodology that was developed for designing and assessing the feasibility of a hybrid solar-biomass power plant in Gujarat. Design/methodology/approach: The methodology described is a combination of engineering and business management studies used to evaluate and design solar thermal collectors for specific applications and locations. For the scenario of a hybrid plant, the methodology involved: the analytical hierarchy process, for solar thermal technology selection; a cost-exergy approach, for design optimisation; quality function deployment, for designing and evaluating a novel collector - termed the elevation linear Fresnel reflector (ELFR); and case study simulations, for analysing alternative hybrid plant configurations. Findings: The paper recommended that for a hybrid plant in Gujarat, a linear Fresnel reflector of 14,000 m2 aperture is integrated with a 3 tonne per hour biomass boiler, generating 815 MWh per annum of electricity for nearby villages and 12,450 tonnes of ice per annum for local fisheries and food industries. However, at the expense of a 0.3 ¢/kWh increase in levelised energy costs, the ELFR can increase savings of biomass (100 t/a) and land (9 ha/a). Research limitations/implications: The research reviewed in this paper is primarily theoretical and further work will need to be undertaken to specify plant details such as piping layout, pump sizing and structure, and assess plant performance during real operational conditions. Originality/value: The paper considers the methodology adopted proved to be a powerful tool for integrating technology selection, optimisation, design and evaluation and promotes interdisciplinary methods for improving sustainable engineering design and energy management. © Emerald Group Publishing Limited.

Reactor design and its impact on performance and products

This chapter discusses engineering design and performance of various types of biomass transformation reactors. These reactors vary in their operating principle depending on the processing capacity and the nature of the desired end product, that is, gas, chemicals or liquid bio-oil. Mass balance around a thermal conversion reactor is usually carried out to identify the degree of conversion and obtain the amount of the various components in the product. The energy balance around the reactors is essential for determining the optimum reactor temperature and the amount of heat required to complete the overall reactions. Experimental and pilot-plant testing is essential for proper reactor design. However, it is common practice to use correlation and valid parameter values in determining the realistic reactor dimensions and configurations. Despite the recent progress in thermochemical conversion technology, reactor performance and scale up potential are the subjects of continuing research.

Developing actions to minimise avoidable waste and its challenge to plant safety

Purpose: Considering the UK's limited capacity for waste disposal (particularly for hazardous/radiological waste) there is growing focus on waste avoidance and minimisation to lower the volumes of waste being sent to disposal. The hazardous nature of some waste can complicate its management and reduction. To address this problem there was a need for a decision making methodology to support managers in the nuclear industry as they identify ways to reduce the production of avoidable hazardous waste. The methodology we developed is called Waste And Sourcematter Analysis (WASAN). A methodology that begins the thought process at the pre-waste creation stage (i.e. Avoid). Design/methodology/ approach: The methodology analyses the source of waste, the production of waste inside the facility, the knock on effects from up/downstream facilities on waste production, and the down-selection of waste minimisation actions/options. WASAN has been applied to case studies with licencees and this paper reports on one such case study - the management of plastic bags in Enriched Uranium Residues Recovery Plant (EURRP) at Springfields (UK) where it was used to analyse the generation of radioactive plastic bag waste. Findings: Plastic bags are used in EURRP as a strategy to contain hazard. Double bagging of materials led to the proliferation of these bags as a waste. The paper reports on the philosophy behind WASAN, the application of the methodology to this problem, the results, and views from managers in EURRP. Originality/value: This paper presents WASAN as a novel methodology for analyzing the minimization of avoidable hazardous waste. This addresses an issue that is important to many industries e.g. where legislation enforces waste minimization, where waste disposal costs encourage waste avoidance, or where plant design can reduce waste. The paper forms part of the HSE Nuclear Installations Inspectorate's desire to work towards greater openness and transparency in its work and the development in its thinking.© Crown Copyright 2011.

Developing a Data-Driven Classification of South Florida Plant Communities

A comprehensive, broadly accepted vegetation classification is important for ecosystem management, particularly for planning and monitoring. South Florida vegetation classification systems that are currently in use were largely arrived at subjectively and intuitively with the involvement of experienced botanical observers and ecologists, but with little support in terms of quantitative field data. The need to develop a field data-driven classification of South Florida vegetation that builds on the ecological organization has been recognized by the National Park Service and vegetation practitioners in the region. The present work, funded by the National Park Service Inventory and Monitoring Program - South Florida/Caribbean Network (SFCN), covers the first stage of a larger project whose goal is to apply extant vegetation data to test, and revise as necessary, an existing, widely used classification (Rutchey et al. 2006). The objectives of the first phase of the project were (1) to identify useful existing datasets, (2) to collect these data and compile them into a geodatabase, (3) to conduct an initial classification analysis of marsh sites, and (4) to design a strategy for augmenting existing information from poorly represented landscapes in order to develop a more comprehensive south Florida classification.

Isolation and selection of plant growth-promoting bacteria associated with sugarcane

v. 46, n. 2, p. 149-158, apr./jun. 2016.

Integrating structural and input design of a 2-DOF high-speed parallel manipulator: A flexible model-based approach

This paper discusses the integrated design of parallel manipulators, which exhibit varying dynamics. This characteristic affects the machine stability and performance. The design methodology consists of four main steps: (i) the system modeling using flexible multibody technique, (ii) the synthesis of reduced-order models suitable for control design, (iii) the systematic flexible model-based input signal design, and (iv) the evaluation of some possible machine designs. The novelty in this methodology is to take structural flexibilities into consideration during the input signal design; therefore, enhancing the standard design process which mainly considers rigid bodies dynamics. The potential of the proposed strategy is exploited for the design evaluation of a two degree-of-freedom high-speed parallel manipulator. The results are experimentally validated. (C) 2010 Elsevier Ltd. All rights reserved.

Performance of `Tahiti` lime on twelve rootstocks under irrigated and non-irrigated conditions

Faced with new challenges, such as emerging diseases, shortening of orchard longevity, and larger social and environmental demands from consumers, practices such as rootstock diversification, irrigation and high density plantings have become relevant for the Brazilian citrus industry. This research had the objective to evaluate the performance of irrigated and non-irrigated `Tahiti` lime trees grafted on 12 rootstocks and one interstock. Plots were distributed following a randomized block design, with four replicates and one plant per plot. Rootstocks influenced plant vigor, especially `Flying Dragon` trifoliate, which reduced tree height by approximately 47% compared to the `Rangpur lime. Trees that were budded on more vigorous rootstocks showed higher yield when grown without irrigation than with irrigation. The `1646` citradia and `Morton` citrange rootstocks performed particularly well. On the other hand, the plants on less vigorous rootstocks showed better performance in terms of yield under irrigation than the same combinations without irrigation, especially those grafted on the tetraploid `Carrizo` and `Troyer` citranges, `Swingle` citrumelo, `Davis A` trifoliate and `Flying Dragon` trifoliate. Plants budded on the `1708` citradia had high yields under irrigated and non-irrigated conditions. The effect of interstock on plant vigor was dependent of rootstock. Interstocked plants on `Davis A` trifoliate were higher than those without interstock. On the other hand, interstocked plants on Catania 2 `Volkamer` lemon were less vigorous than those without interstock. (C) 2011 Elsevier B.V. All rights reserved.

MiAMP1, a novel protein from Macadamia integrifolia adopts a Greek key beta-barrel fold unique amongst plant antimicrobial proteins

MiAMP1 is a recently discovered 76 amino acid residue, highly basic protein from the nut kernel of:Macadamia integrifolia which possesses no sequence homology to any known protein and inhibits the growth of several microbial plant pathogens in vitro while having no effect on mammalian or plant cells. It is considered to be a potentially useful tool for the genetic engineering of disease resistance in transgenic crop plants and for the design of new fungicides. The three-dimensional structure of MiAMP1 was determined through homonuclear and heteronuclear (N-15) 2D NMR spectroscopy and subsequent simulated annealing calculations with the ultimate aim of understanding the structure-activity relationships of the protein. MiAMP1 is made up of eight beta-strands which are arranged in two Greek key motifs. These Greek key motifs associate to form a Greek key beta-barrel. This structure is unique amongst plant antimicrobial proteins and forms a new class which we term the beta-barrelins. Interestingly, the structure of MiAMP1 bears remarkable similarity to a yeast killer toxin from Williopsis mrakii. This toxin acts by inhibiting beta-glucan synthesis and thereby cell wall construction in sensitive strains of yeast. The structural similarity of MiAMP1 and WmKT, which originate from plant and fungal phyla respectively, may reflect a similar mode of action. (C) 1999 Academic Press.