Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

Swarm Intelligent Selection and Optimization of Machining System Parameters for Microchannel Fabrication in Medical Devices

Current technology trends in medical device industry calls for fabrication of massive arrays of microfeatures such as microchannels on to nonsilicon material substrates with high accuracy, superior precision, and high throughput. Microchannels are typical features used in medical devices for medication dosing into the human body, analyzing DNA arrays or cell cultures. In this study, the capabilities of machining systems for micro-end milling have been evaluated by conducting experiments, regression modeling, and response surface methodology. In machining experiments by using micromilling, arrays of microchannels are fabricated on aluminium and titanium plates, and the feature size and accuracy (width and depth) and surface roughness are measured. Multicriteria decision making for material and process parameters selection for desired accuracy is investigated by using particle swarm optimization (PSO) method, which is an evolutionary computation method inspired by genetic algorithms (GA). Appropriate regression models are utilized within the PSO and optimum selection of micromilling parameters; microchannel feature accuracy and surface roughness are performed. An analysis for optimal micromachining parameters in decision variable space is also conducted. This study demonstrates the advantages of evolutionary computing algorithms in micromilling decision making and process optimization investigations and can be expanded to other applications

Visualization of communication system testing logs

During the past decades testing has matured from ad-hoc activity into being an integral part of the development process. The benefits of testing are obvious for modern communication systems, which operate in heterogeneous environments amongst devices from various manufacturers. The increased demand for testing also creates demand for tools and technologies that support and automate testing activities. This thesis discusses applicability of visualization techniques in the result analysis part of the testing process. Particularly, the primary focus of this work is visualization of test execution logs produced by a TTCN-3 test system. TTCN-3 is an internationally standardized test specification and implementation language. The TTCN-3 standard suite includes specification of a test logging interface and a graphical presentation format, but no immediate relationship between them. This thesis presents a technique for mapping the log events to the graphical presentation format along with a concrete implementation, which is integrated with the Eclipse Platform and the OpenTTCN Tester toolchain. Results of this work indicate that for majority of the log events, a visual representation may be derived from the TTCN-3 standard suite. The remaining events were analysed and three categories relevant in either log analysis or implementation of the visualization tool were identified: events indicating insertion of something into the incoming queue of a port, events indicating a mismatch and events describing the control flow during the execution. Applicability of the results is limited into the domain of TTCN-3, but the developed mapping and the implementation may be utilized with any TTCN-3 tool that is able to produce the execution log in the standardized XML format.

Peter Pan never goes out of style : nuorisotutkijat ymmällään

Kirjallisuusarvostelu

Design of RFID-system for industrial after-sale service

RFID-tekniikka on radiotaajuudella toimivaa etätunnistusta, jossa hyödynnetään RFID-tunnisteiksi kutsuttuja tageja, sekä RFID-lukijoita. RFID-tekniikan käyttökohteet ovat erittäin laajat. Tässä kandidaatintyössä tutkitaan RFID-tekniikan hyödyntämismahdollisuuksia teollisuuden huoltopalvelusuhteessa. Työ keskittyy huollettavien laitteiden etätunnistamiseen mobiileja RFID-lukijoita hyödyntäen. Laitteiden tiedot noudetaan olemassa olevasta tietokannasta web-käyttöliittymän kautta. Koska laitteet koostuvat pääosin metallista, joudutaan tunnistetyyppien valintaa pohtimaan tarkasti. Metallipinnat sekä nesteet vaikuttavat erittäin negatiivisesti useiden tunnisteiden lukuetäisyyteen. Työssä keskitytään vaadittavan järjestelmän suunnittelemiseen aikaisempia tutkimuksia hyödyntäen, mutta itse järjestelmän toteutus ei kuulu tähän kandidaatintyöhön. Lopussa järjestelmän alustava suunnitelma esitellään.

The Use of Nervous System Drugs and the Risk of Fractures in Old Adults

Hermostoon vaikuttavien lääkkeiden käyttö on yleistä iäkkäässä väestössä. Erityisen yleistä käyttö on pitkäaikaisessa laitoshoidossa asuvilla iäkkäillä. Hermostoon vaikuttavien lääkkeiden haittavaikutuksia on tutkittu paljon, ja useat hermostoon vaikuttavat lääkeaineryhmät on tunnistettu murtumien riskitekijöiksi. Aikaisemmin ei ole kuitenkaan tutkittu usean hermostoon vaikuttavan lääkkeen yhteiskäytön yhteyksiä murtuman riskiin 65 vuotta täyttäneillä. Väitöskirjatutkimuksessa havaittiin, että usean hermostoon vaikuttavan lääkeaineen yhtäaikainen käyttö oli hyvin yleistä Porin kaupunginsairaalan viidellä pitkäaikaisen laitoshoidon osastolla (n = 154) vuosien 2004 ja 2005 vaihteessa. Kolmasosa tutkituista käytti säännöllisesti kolmea tai useampaa hermostoon vaikuttavaa lääkettä samanaikaisesti. Kun huomioitiin myös tarvittaessa otettavat lääkkeet, vastaava luku oli 53 %. Tutkimuksessa havaittiin myös viitteitä lääkkeiden epäasianmukaisesta käytöstä, kun potilaiden käyttämiä lääkkeitä verrattiin heidän kognitiiviseen ja fyysiseen suorituskyynsä sekä asetettuihin diagnooseihin. Liedon kunnassa 1990-luvulla toteutettuun väestöpohjaiseen Liedon Iäkkäät -seurantatutkimukseen osallistui 1177 lietolaista 65 vuotta täyttänyttä. Lääkitystietoja sekä seuranta-aikana tapahtuneita murtumia analysoimalla havaittiin, että kahden tai useamman bentsodiatsepiinin sekä kahden tai useamman psykoosilääkkeen käyttö oli yhteydessä murtuman riskiin 65 vuotta täyttäneillä miehillä. Opioidin ja psykoosilääkkeen yhteiskäyttö sekä opioidin ja bentsodiatsepiinin yhteiskäyttö oli yhteydessä iäkkäiden miesten murtuman riskiin. Naisilla vastaavia tilastollisesti merkitseviä yhteyksiä ei havaittu. Väitöskirjatutkimuksen uusin osa-aineisto perustui Porissa vuosina 2009–2010 toteutetun Satauni-tutkimuksen aineistoon. Tutkimuksessa osoitettiin 89 potilaan aineistossa, että hallittu, yhden kuukauden aikana lääkärin ja hoitajan tuella toteutettu bentsodiatsepiinivieroitus paransi merkitsevästi 55 vuotta täyttäneiden naisten käden puristusvoimaa kuuden kuukauden seuranta-aikana. Vastaavaa yhteyttä ei havaittu miehillä. Bentsodiatsepiinivieroituksella ei ollut yhteyttä osallistujien tasapainotestin tulosten paranemiseen kuuden kuukauden seurantaaikana. Murtumilla on vakavia seurauksia sekä yksilötasolla että yhteiskunnallisesti iäkkäässä väestössä. Murtumien ehkäisy on hyvin tärkeää. Siinä tulee kiinnittää huomiota potilaan käyttämään lääkitykseen ja arvioida erityisesti usean hermostoon vaikuttavan lääkkeen yhteiskäytön tarpeellisuutta.

Fundraising and investor relations in social enterprise: Marketing your way out of the pioneer gap in African off-grid renewable energy

Social enterprises apply the best of business for the pursuit of social or environmental mission while also generating revenues. Globally, nearly 1,3 billion people lack access to electricity, as well as another billion having access to only low quality and infrequent electricity. Off-grid renewable energy, like solar, will increasingly have a key role in the solution of the energy access issue. The pioneer gap in off-grid renewable energy consists of financing (or funding) gaps and capacity gaps, to do with both the early stage of the enterprises in question, as well as the early stage of the whole industry. The gaps are emphasised by specific characteristics of off-grid renewable energy business models and the requirements of operating in bottom-of-the-pyramid markets. The marketing perspective to fundraising is chosen to uncover the possible role enterprises themselves have in bridging the pioneer gap. The purpose of this thesis is to study how social enterprises operating in off-grid renewable energy in Africa utilise marketing activities in their investor relations in bridging the pioneer gap. This main research question is divided into the following sub-questions:  How does the pioneer gap affect fundraising for these enterprises?  How are the funding needs for these enterprises characterised?  How do these enterprises build trust in their investor relations? The theoretic framework is built on relationship marketing and investor relations, with an emphasis on creation of trust. The research is conducted as a thematical case study. Primary data is gathered via semi-structured interviews with six solar energy companies and two accelerators. According to the findings, the main components affecting trust-creation are diminished information asymmetry and perceived risk, mission alignment as well as a personal fit or relationship with the investor. Therefore, an enterprise can utilise e.g. the following marketing activities in their investor relations to bridge the pioneer gap: ensuring investor material, the enterprise story and presenting of them is clear, concise and complete to “package” the enterprise as an investment; taking investor needs and motivations into account as well as utilising existing investors as ambassadors.

Effect of trellising system on grape and wine composition of Syrah vines grown in the cerrado region of Minas Gerais

Based on the concept that the trellising system affects not only sunlight interception and carbon assimilation, but also the fruitzone microclimate, which has a great impact on fruit composition and consequently on wine quality, the effect of two trellising systems - Vertical Shoot Position (VSP) and modified Geneva Double Curtain (GDC) - on wine and berry composition of Syrah grapes grown in João Pinheiro, Northeast region of Minas Gerais State, Brazil was investigated. The parameters such as pH, berry size and weight, and seeds total phenolic contents were not affected by the training system. The GDC system produced fruits with the highest Brix and lowest titratable acidity. Berries from the VSP system presented lower anthocyanin concentration than those from the GDC system. Similar results were found for the total phenolic content of the skin of grape berries from the VSP system. GDC wines were characterized by high anthocyanin content and red color, resulting in wines with high color intensity. These data suggest that in the tropical region of Minas Gerais state, with high temperature and high sunlight intensity, the trellising system, which protects bunches against excessive radiation, should be chosen.

Optimization of Transportation System by Tailored Logistics Network: A Case Study in Automotive Industry

This thesis aims to redesign the supply chain system in an automotive industry in order to obtain space reduction in the inventory by using tailored logistics network. The redesigning process by tailored supply chain will combine all possible shipment methods including direct shipment, milk-run, milk-run via distribution center and Kanban delivery. The current supply chain system in Nissan goes rather well when the production volume is in moderate level. However, when the production volume is high, there is a capacity problem in the warehouse to accommodate all delivered parts from suppliers. Hence, the optimization of supply chain system is needed in order to obtain efficient logistics process and effective inventory consumption. The study will use primary data for both qualitative and quantitative approach as the research methods. Qualitative data will be collected by conducting interviews with people related to procurement and inventory control. Quantitative data consists of list of suppliers with their condition in several parameters which will be evaluated and analyzed by using scoring method to assign the most suitable transportation network to each suppliers for improvement of inventory reduction in a cost efficient manner.