Implementation of a drive-by monitoring system for transport infrastructure utilising GNSS

Ageing and deterioration of infrastructure is a challenge facing transport authorities. In particular, there is a need for increased bridge monitoring in order to provide adequate maintenance, prioritise allocation of funds and guarantee acceptable levels of transport safety. Existing bridge structural health monitoring (SHM) techniques typically involve direct instrumentation of the bridge with sensors and equipment for the measurement of properties such as frequencies of vibration. These techniques are important as they can indicate the deterioration of the bridge condition. However, they can be labour intensive and expensive due to the requirement for on-site installations. In recent years, alternative low-cost indirect vibrationbased SHM approaches have been proposed which utilise the dynamic response of a vehicle to carry out “drive-by” pavement and/or bridge monitoring. The vehicle is fitted with sensors on its axles thus reducing the need for on-site installations. This paper investigates the use of low-cost sensors incorporating global navigation satellite systems (GNSS) for implementation of the drive-by system in practice, via field trials with an instrumented vehicle. The potential of smartphone technology to be harnessed for drive by monitoring is established, while smartphone GNSS tracking applications are found to compare favourably in terms of accuracy, cost and ease of use to professional GNSS devices.

High-performance parallel systems for data-intensive computing

Thesis (Ph.D.)--University of Washington, 2016-08

Discrete-event Simulation and Optimization to Improve the Performance of a Healthcare System

Thesis (Ph.D.)--University of Washington, 2016-08

PHC Production Management System Based on RFID

At present, in large precast concrete enterprises, the management over precast concrete component has been chaotic. Most enterprises take labor-intensive manual input method, which is time consuming and laborious, and error-prone. Some other slightly better enterprises choose to manage through bar-code or printing serial number manually. However, on one hand, this is also labor-intensive, on the other hand, this method is limited by external environment, making the serial number blur or even lost, and also causes a big problem on production traceability and quality accountability. Therefore, to realize the enterprise’s own rapid development and cater to the needs of the time, to achieve the automated production management has been a big problem for a modern enterprise. In order to solve the problem, inefficiency in production and traceability of the products, this thesis try to introduce RFID technology into the production of PHC tubular pile. By designing a production management system of precast concrete components, the enterprise will achieve the control of the entire production process, and realize the informatization of enterprise production management. RFID technology has been widely used in many fields like entrance control, charge management, logistics and so on. RFID technology will adopt passive RFID tag, which is waterproof, shockproof, anti-interference, so it’s suitable for the actual working environment. The tag will be bound to the precast component steel cage (the structure of the PHC tubular pile before the concrete placement), which means each PHC tubular pile will have a unique ID number. Then according to the production procedure, the precast component will be performed with a series of actions, put the steel cage into the mold, mold clamping, pouring concrete (feed), stretching, centrifugalizing, maintenance, mold removing, welding splice. In every session of the procedure, the information of the precast components can be read through a RFID reader. Using a portable smart device connected to the database, the user can check, inquire and management the production information conveniently. Also, the system can trace the production parameter and the person in charge, realize the traceability of the information. This system can overcome the disadvantages in precast components manufacturers, like inefficiency, error-prone, time consuming, labor intensity, low information relevance and so on. This system can help to improve the production management efficiency, and can produce a good economic and social benefits, so, this system has a certain practical value.

Between path dependency and contingency: new challenges for the geography of port system evolution.

Seaports play a critical role as gateways and facilitators of economic interchange and logistics processes and thus have become crucial nodes in globalised production networks andmobility systems. Both the physical port infrastructure and its operational superstructure have undergone intensive evolution processes in an effort to adapt to changing economic environments, technological advances,maritime industry expectations and institutional reforms. The results, in terms of infrastructure, operator models and the role of an individual port within the port system, vary by region, institutional and economic context. While ports have undoubtedly developed in scale to respond to the changing volumes and structures in geographies of trade (Wilmsmeier, 2015), the development of hinterland access infrastructure, regulatory systems and institutional structures have in many instances lagged behind. The resulting bottlenecks reflect deficits in the interplay between the economic system and the factors defining port development (e.g. transport demand, the structure of trade, transport services, institutional capacities, etc. cf. Cullinane and Wilmsmeier, 2011). There is a wide range of case study approaches and analyses of individual ports, but analyses from a port system perspective are less common, and those that exist are seldom critical of the dominant discourse assuming the efficiency of market competition (cf. Debrie et al., 2013). This special section aims to capture the spectrum of approaches in current geography research on port system evolution. Thus, the papers reach from the traditional spatial approach (Rodrigue and Ashar, this volume) to network analysis (Mohamed-Chérif and Ducruet, this volume) to institutional discussions (Vonck and Notteboom, this volume; Wilmsmeier and Monios, this volume). The selection of papers allows an opening of discussion and reflection on current research, necessary critical analysis of the influences on port systemevolution and,most importantly, future directions. The remainder of this editorial aims to reflect on these challenges and identify the potential for future research.

Learning strategies implemented by the students of Advanced Intensive English I courses for improving oral discourse in the Bachelor of Arts in English Teaching, Department of Foreign Languages, University of El Salvador, year 2014.

There are many learning strategies some, more successful than others when they are applied in a correct way. “Strategies are most successful when they are implemented in a system that encourages collaboration among staff and students, and in which each is a part of a well-planned whole system” (Johns Hopkins, 2000). Additionally, Learning strategies have become an effective instrument in the field of education because students can make use of several strategies in order to enhance their English level in terms of communication. To communicate in a meaningful way, it is important to express ideas inside and outside the classroom; it is part of the development and improvement of speaking.

Bacterial community characterization of water and intestine of the shrimp Litopenaeus stylirostris in a biofloc system

Background Biofloc technology (BFT), a rearing method with little or no water exchange, is gaining popularity in aquaculture. In the water column, such systems develop conglomerates of microbes, algae and protozoa, together with detritus and dead organic particles. The intensive microbial community presents in these systems can be used as a pond water quality treatment system, and the microbial protein can serve as a feed additive. The current problem with BFT is the difficulty of controlling its bacterial community composition for both optimal water quality and optimal shrimp health. The main objective of the present study was to investigate microbial diversity of samples obtained from different culture environments (Biofloc technology and clear seawater) as well as from the intestines of shrimp reared in both environments through high-throughput sequencing technology. Results Analyses of the bacterial community identified in water from BFT and “clear seawater” (CW) systems (control) containing the shrimp Litopenaeus stylirostris revealed large differences in the frequency distribution of operational taxonomic units (OTUs). Four out of the five most dominant bacterial communities were different in both culture methods. Bacteria found in great abundance in BFT have two principal characteristics: the need for an organic substrate or nitrogen sources to grow and the capacity to attach to surfaces and co-aggregate. A correlation was found between bacteria groups and physicochemical and biological parameters measured in rearing tanks. Moreover, rearing-water bacterial communities influenced the microbiota of shrimp. Indeed, the biofloc environment modified the shrimp intestine microbiota, as the low level (27 %) of similarity between intestinal bacterial communities from the two treatments. Conclusion This study provides the first information describing the complex biofloc microbial community, which can help to understand the environment-microbiota-host relationship in this rearing system.

A REMOTE SENSING APPROACH TO CHARACTERIZE THE HYDROGEOLOGY OF MOUNTAINOUS AREAS: APPLICATION TO THE QUITO AQUIFER SYSTEM (QAS), ECUADOR

Climate change, intensive use, and population growth are threatening the availability of water resources. New sources of water, better knowledge of existing ones, and improved water management strategies are of paramount importance. Ground water is often considered as primary water source due to its advantages in terms of quantity, spatial distribution, and natural quality. Remote sensing techniques afford scientists a unique opportunity to characterize landscapes in order to assess groundwater resources, particularly in tectonically influenced areas. Aquifers in volcanic basins are considered the most productive aquifers in Latin America. Although topography is considered the primary driving force for groundwater flows in mountainous terrains, tectonic activity increases the complexity of these groundwater systems by altering the integrity of sedimentary rock units and the overlying drainage networks. Structural controls affect the primary hydraulic properties of the rock formations by developing barriers to flow in some cases and zones of preferential infiltration and subterranean in others. The study area focuses on the Quito Aquifer System (QAS) in Ecuador. The characterization of the hydrogeology started with a lineament analysis based on a combined remote sensing and digital terrain analysis approach. The application of classical tools for regional hydrogeological evaluation and shallow geophysical methods were useful to evaluate the impact of faulting and fracturing on the aquifer system. Given the spatial extension of the area and the complexity of the system, two levels of analysis were applied in this study. At the regional level, a lineament map was created for the QAS. Relationships between fractures, faults and lineaments and the configuration of the groundwater flow on the QAS were determined. At the local level, on the Plateaus region of the QAS, a detailed lineament map was obtained by using high-spatial-resolution satellite imagery and aspect map derived from a digital elevation model (DEM). This map was complemented by the analysis of morphotectonic indicators and shallow geophysics that characterize fracture patterns. The development of the groundwater flow system was studied, drawing upon data pertaining to the aquifer system physical characteristics and topography. Hydrochemistry was used to ascertain the groundwater evolution and verify the correspondence of the flow patterns proposed in the flow system analysis. Isotopic analysis was employed to verify the origin of groundwater. The results of this study show that tectonism plays a very important role for the hydrology of the QAS. The results also demonstrate that faults influence a great deal of the topographic characteristics of the QAS and subsequently the configuration of the groundwater flow. Moreover, for the Plateaus region, the results demonstrate that the aquifer flow systems are affected by secondary porosity. This is a new conceptualization of the functioning of the aquifers on the QAS that will significantly contribute to the development of better strategies for the management of this important water resource.

A Collaborative Mobile Crowdsensing System for Smart Cities

Nowadays words like Smart City, Internet of Things, Environmental Awareness surround us with the growing interest of Computer Science and Engineering communities. Services supporting these paradigms are definitely based on large amounts of sensed data, which, once obtained and gathered, need to be analyzed in order to build maps, infer patterns, extract useful information. Everything is done in order to achieve a better quality of life. Traditional sensing techniques, like Wired or Wireless Sensor Network, need an intensive usage of distributed sensors to acquire real-world conditions. We propose SenSquare, a Crowdsensing approach based on smartphones and a central coordination server for time-and-space homogeneous data collecting. SenSquare relies on technologies such as CoAP lightweight protocol, Geofencing and the Military Grid Reference System.

A Case Based approach to assess Waiting Time Prediction at an Intensive Care Unity

Waiting time at an intensive care unity stands for a key feature in the assessment of healthcare quality. Nevertheless, its estimation is a difficult task, not only due to the different factors with intricate relations among them, but also with respect to the available data, which may be incomplete, self-contradictory or even unknown. However, its prediction not only improves the patients’ satisfaction but also enhance the quality of the healthcare being provided. To fulfill this goal, this work aims at the development of a decision support system that allows one to predict how long a patient should remain at an emergency unit, having into consideration all the remarks that were just stated above. It is built on top of a Logic Programming approach to knowledge representation and reasoning, complemented with a Case Base approach to computing.

Length of Stay in Intensive Care Units - A Case Base Evaluation

As a matter of fact, an Intensive Care Unit (ICU) stands for a hospital facility where patients require close observation and monitoring. Indeed, predicting Length-of-Stay (LoS) at ICUs is essential not only to provide them with improved Quality-of-Care, but also to help the hospital management to cope with hospital resources. Therefore, in this work one`s aim is to present an Artificial Intelligence based Decision Support System to assist on the prediction of LoS at ICUs, which will be centered on a formal framework based on a Logic Programming acquaintance for knowledge representation and reasoning, complemented with a Case Based approach to computing, and able to handle unknown, incomplete, or even contradictory data, information or knowledge.

Profile and Role of Woman Involvement in Dry System Pig Farming

This research was purposed to study the profile and role of woman involvement in dry system pig farming (pig housing with mattress from grass, pig manure, vegetable waste and kitchen waste).  The research was carried out from August to November 2003.  Pig housing areas were located on eight villages of Kertek District in Wonosobo Regency (Central Java).  The method applied was survey with intensive observation.  Sample were randomly selected, involved 180 respondents (15 percent of total pig farmers), while the locations of the sample were selected based on purposive sampling method.  The result showed that respondents were in productive age, with low formal education level. Most of all are Moslems (98%) and they have small family size.  The level of woman involvement in pig farming was high, approximately 85 percent.  They have other income source and they involve in pig farming to help their husbands in generating income.  Experience in the dry system pig farming was quite long (more than 10 years) and skill come from imitating their neighbours otherwise of autodidact. (Animal Production 6(1): 23-29 (2004) Key Words: Pig, Dry System, Woman Profile and Role