Inovação tecnológica: análise comparativa entre dois métodos de coleta de dados sobre riscos e danos em enfermagem

Estudo de comparação entre dois métodos de coleta de dados, através da aplicação de um software, para avaliação dos fatores de risco e danos no trabalho de enfermagem em hospital. Objetiva analisar o uso do software (eletrônico) em comparação com o uso do instrumento impresso. Trata-se de um estudo estatístico, descritivo com abordagem quantitativa, desenvolvido nas enfermarias dos Serviços de Internações Clínicas e Serviços de Internações Cirúrgicas de um Hospital Universitário, no estado do Rio de Janeiro. A população do estudo foram os trabalhadores de enfermagem das unidades. A amostra foi definida por meio de amostragem não-probabilística e alocação da amostra ocorreu de forma aleatória em dois grupos, denominados grupo impresso e grupo eletrônico, com 52 participantes cada. Previamente a coleta de dados foram implementadas estratégias de pesquisa denominada teaser, através da comunicação digital aos trabalhadores. Posteriormente, foi ofertado aos participantes do formato impresso o questionário impresso, e os participantes do formato eletrônico receberam um link de acesso a home page. Os dados foram analisados através da estatística descritiva simples. Após a aplicação do questionário nos dois formatos, obteve-se resposta de 47 trabalhadores do grupo impresso (90,3%), e 17 trabalhadores do grupo eletrônico (32,7%). A aplicação do questionário impresso revelou algumas vantagens como o número de pessoas atingidas pela pesquisa, maior interação pesquisador e participante, taxa de retorno mais alta, e quanto às desvantagens a demanda maior de tempo, erros de transcrição, formulação de banco de dados, possibilidades de resposta em branco e erros de preenchimento. No formato eletrônico as vantagens incluem a facilidade de tabulação e análise dos dados, impossibilidade de não resposta, metodologia limpa e rápida, e como desvantagens, o acesso à internet no período de coleta de dados, saber usar o computador e menor taxa de resposta. Ambos os grupos observaram que o questionário possui boas instruções e fácil compreensão, além de curto tempo para resposta. Os trabalhadores perceberam a existência dos riscos ocupacionais, principalmente os ergonômicos, biológicos e de acidentes. Os principais danos à saúde provocados ou agravos pelo trabalho percebidos pelos trabalhadores foram os problemas osteomusculares, estresse, transtornos do sono, mudanças de humor e alterações de comportamento e varizes. Pode-se afirmar que não ocorreram diferenças acentuadas de percentual ao comparar a percepção dos trabalhadores do grupo impresso e do grupo eletrônico frente aos riscos e danos à saúde. Conclui-se que os dois processos de coleta de dados tiveram boa aceitação, no entanto, deve ser indicada a aplicação do questionário eletrônico junto com a ferramenta de acesso, no caso o computador, tablet.

An investigation of survey technologies and modeling techniques for improving deepwater surveys of nonindigenous species in the Northwestern Hawaiian Islands

Nonindigenous species (NIS) are a major threat to marine ecosystems, with possible dramatic effects on biodiversity, biological productivity, habitat structure and fisheries. The Papahānaumokuākea Marine National Monument (PMNM) has taken active steps to mitigate the threats of NIS in Northwestern Hawaiian Islands (NWHI). Of particular concern are the 13 NIS already detected in NWHI and two invasive species found among the main Hawaiian Islands, snowflake coral (Carijoa riseii) and a red alga (Hypnea musciformis). Much of the information regarding NIS in NWHI has been collected or informed by surveys using conventional SCUBA or fishing gear. These technologies have significant drawbacks. SCUBA is generally constrained to depths shallower than 40 m and several NIS of concern have been detected well below this limit (e.g., L. kasmira – 256 m) and fishing gear is highly selective. Consequently, not all habitats or species can be properly represented. Effective management of NIS requires knowledge of their spatial distribution and abundance over their entire range. Surveys which provide this requisite information can be expensive, especially in the marine environment and even more so in deepwater. Technologies which minimize costs, increase the probability of detection and are capable of satisfying multiple objectives simultaneously are desired. This report examines survey technologies, with a focus on towed camera systems (TCSs), and modeling techniques which can increase NIS detection and sampling efficiency in deepwater habitats of NWHI; thus filling a critical data gap in present datasets. A pilot study conducted in 2008 at French Frigate Shoals and Brooks Banks was used to investigate the application of TCSs for surveying NIS in habitats deeper than 40 m. Cost and data quality were assessed. Over 100 hours of video was collected, in which 124 sightings of NIS were made among benthic habitats from 20 to 250 m. Most sightings were of a single cosmopolitan species, Lutjanus kasmira, but Cephalopholis argus, and Lutjanus fulvus, were also detected. The data expand the spatial distributions of observed NIS into deepwater habitats, identify algal plain as an important habitat and complement existing data collected using SCUBA and fishing gear. The technology’s principal drawback was its inability to identify organisms of particular concern, such as Carijoa riseii and Hypnea musciformis due to inadequate camera resolution and inability to thoroughly inspect sites. To solve this issue we recommend incorporating high-resolution cameras into TCSs, or using alternative technologies, such as technical SCUBA diving or remotely operated vehicles, in place of TCSs. We compared several different survey technologies by cost and their ability to detect NIS and these results are summarized in Table 3.

Application of the phylogenetic analysis in mitochondrial disease study

Mitochondrial disease currently received an increasing concern. However, the case-control design commonly adopted in this field is vulnerable to genetic background, population stratification and poor data quality. Although the phylogenetic analysis could

面向ETL过程的数据质量控制系统的设计与实现

ETL过程是一个从分布数据源(包括数据库、应用系统、文件系统等)抽取数据，进行转换、集成和传输，并最终加载到目标系统的过程。传统的ETL过程主要服务于数据仓库(Data Warehouse)，属于企业决策支持系统的一部分。随着数据集成技术的发展和轻量级的数据集成中间件的出现，ETL过程广泛应用于企业数据集成与数据交换系统。在ETL过程中，数据质量控制是一个极为重要的基本组件和功能，它对集成中的数据进行检测、转换、清洗，以防止“脏”数据进入目标系统。在ETL过程中如果缺少对数据质量的有效控制，就会导致数据集成项目无法圆满实现目标或彻底失败。 针对ETL过程中存在的数据质量问题，设计并实现面向ETL过程的数据质量控制系统，是本文研究的重点。论文通过对ETL过程中各阶段可能产生的数据质量问题进行了分类，并对质量控制需求建模，提出一个面向ETL过程的数据质量控制框架，该框架通过对源端数据的分析来指导ETL的设计，通过灵活、可配置、可扩展的数据处理机制实现数据的过滤、转换与清洗，并支持对数据质量处理全过程进行监控。在该框架基础上，论文特别在灵活的数据处理机制、数据分析、数据过滤和数据清洗四个方面进行了探讨。在数据处理机制方面，提出了基于插件元模型的数据处理机制，该机制可以满足用户对数据过滤、数据转换与数据清洗等功能的各种定制需求，并具有较强的可扩展性；在数据分析方面，根据字段类型对数据进行分类统计，并针对大数据量统计分析问题，提出了可自动配置的不同数据统计策略；在数据过滤方面，通过将抽取数据的SQL语句重写的方式，过滤不满足完整性约束的元组；在数据清洗方法方面给出了一种利用统计信息动态确定属性相似度权重的方法，对基于字段的相似记录检测算法的领域无关算法进行了改进，提高了数据检测的准确性。在上述工作基础上，在数据集成中间件OnceDI中设计并实现了数据质量控制系统，并在设计中通过设计模式的应用增强系统的可扩展性。

基于GIS的小流域坡耕地调查方法探讨

坡耕地研究是水土流失治理及水土保持规划的核心内容 ,GIS的发展及其在多领域的成功应用为坡耕地研究提供了新的技术手段。用矢量基础图件叠加来获取单元图斑的方法是GIS的基本功能 ,但叠加多边形的不确定性成为影响GIS数据质量的灾难性因素。以MapGIS作为基础平台 ,以DOM作为控制底图更新信息 ,采取矢栅叠加的方法获得单元图斑 ,用操作属性表获取专题属性 ,进行小流域坡耕地快速调查的研究 ,展示了矢栅叠加方法在信息复合过程中的显著优势。

胜利勘探数据中心及勘探辅助决策系统研究

In the paper through extensive study and design, the technical plan for establishing the exploration database center is made to combine imported and self developed techniques. By research and repeated experiment a modern database center has been set up with its hardware and network having advanced performance, its system well configured, its data store and management complete, and its data support being fast and direct. Through study on the theory, method and model of decision an exploration decision assistant schema is designed with one decision plan of well location decision support system being evaluated and put into action. 1. Study on the establishment of Shengli exploration database center Research is made on the hardware configuration of the database center including its workstations and all connected hardware and system. The hardware of the database center is formed by connecting workstations, microcomputer workstations, disk arrays, and those equipments used for seismic processing and interpretation. Research on the data store and management includes the analysis of the contents to be managed, data flow, data standard, data QC, data backup and restore policy, optimization of database system. A reasonable data management regulation and workflow is made and the scientific exploration data management system is created. Data load is done by working out a schedule firstly and at last 200 more projects of seismic surveys has been loaded amount to 25TB. 2. Exploration work support system and its application Seismic data processing system support has the following features, automatic extraction of seismic attributes, GIS navigation, data order, extraction of any sized data cube, pseudo huge capacity disk array, standard output exchange format etc. The prestack data can be accessed by the processing system or data can be transferred to other processing system through standard exchange format. For supporting seismic interpretation system the following features exist such as auto scan and store of interpretation result, internal data quality control etc. the interpretation system is connected directly with database center to get real time support of seismic data, formation data and well data. Comprehensive geological study support is done through intranet with the ability to query or display data graphically on the navigation system under some geological constraints. Production management support system is mainly used to collect, analyze and display production data with its core technology on the controlled data collection and creation of multiple standard forms. 3. exploration decision support system design By classification of workflow and data flow of all the exploration stages and study on decision theory and method, target of each decision step, decision model and requirement, three concept models has been formed for the Shengli exploration decision support system including the exploration distribution support system, the well location support system and production management support system. the well location decision support system has passed evaluation and been put into action. 4. Technical advance Hardware and software match with high performance for the database center. By combining parallel computer system, database server, huge capacity ATL, disk array, network and firewall together to create the first exploration database center in China with reasonable configuration, high performance and able to manage the whole data sets of exploration. Huge exploration data management technology is formed where exploration data standards and management regulations are made to guarantee data quality, safety and security. Multifunction query and support system for comprehensive exploration information support. It includes support system for geological study, seismic processing and interpretation and production management. In the system a lot of new database and computer technology have been used to provide real time information support for exploration work. Finally is the design of Shengli exploration decision support system. 5. Application and benefit Data storage has reached the amount of 25TB with thousand of users in Shengli oil field to access data to improve work efficiency multiple times. The technology has also been applied by many other units of SINOPEC. Its application of providing data to a project named Exploration achievements and Evaluation of Favorable Targets in Hekou Area shortened the data preparation period from 30 days to 2 days, enriching data abundance 15 percent and getting information support from the database center perfectly. Its application to provide former processed result for a project named Pre-stack depth migration in Guxi fracture zone reduced the amount of repeated process and shortened work period of one month and improved processing precision and quality, saving capital investment of data processing of 30 million yuan. It application by providing project database automatically in project named Geological and seismic study of southern slope zone of Dongying Sag shortened data preparation time so that researchers have more time to do research, thus to improve interpretation precision and quality.

储层评价目标驱动的地震叠前叠后综合反演方法研究

The exploration and development of natural gas in the north of Ordos basin have been one important part in China’s energy stratagem. Reservoir in upper Palaeozoic group is of lithological trap and its prediction is a crux in a series of works. Based on foregoing seismic reservoir prediction, seismic data are re-processed with some optical methods and pre-stack information is used in corresponding inversions. Through the application of diverse methods, a series of techniques for reservoir prediction come into being. Several results are achieved as flowing: 1. A set of log processing and interpretation methods is developed. Porosity, permeability and gas saturation models are rebuilt. 2. Based on the petro-physics analysis of reservoirs in upper Palaeozoic group, the equations about lithology, property, hydrocarbon and elastic parameters are established. 3. Forward modeling based on elastic wave theory is first applied in the study area and increases the resolution of modeling results. 4. A series of techniques such as pre-stack time migration and others are combined to improve the data quality. 5. Pre-stack seismic inversion is first employed in the north of Ordos Basin and brings the results of EI, P-impedance, S-impedance and other elastic parameters. 6. In post-stack inversion, logs indicating reservoir parameters are rebuilt and boost the resolution of lithology inversion. 7. Amplitude, coherence, frequency-discomposed amplitude, waveform and other sensitive attributes are extracted to describe sands distribution. Seismic modes standing for sands of P1x3, P1x2 are established. 8. Among 9 proposed wells, 8 wells encountered sands and became production wells. The output of DK13 amounts to 510,000 m3 per day. Keywords：the north of Ordos Basin, reservoir prediction, pre-stack inversion, post-stack inversion, seismic attributes．

北部湾盆地迈陈凹陷地震勘探方法研究

Maichen Depression lie between Leizhou Peninsula and Qiongzhou Strait. Oil and gas have been discovered in Weixinan Depression, Wushi Depression and Fushan Depression, which pertain to a same basin — North Sea Basin along with Maichen Depression.Jiangsu Oil started exploration at 2002. The first well began to drill at November, 2004 after gravity survey, electric method prospecting and 2D seismic exploration had been finished. Generating rock and hydrocarbon shows have been verified by the drilling. Low yield oil stream has been tested. And we started 3D seismic exploration at November, 2005. My thesis topic came from the actual needs of our exploration in the Maichen Depression. In the thesis, I give emphasis to analyse the own seismic geologic conditions of Maichen Depression. By real tests, we choosed the means to overcome or weaken the unfavorably impress owing to the own coditions in Maichen Depression. Finally, we obtained the usable seismic data. 1. Owing to the multiphase eruptive rock during the Quaternary Period, the near surface layers are very inhomogeneous. By simultaneous testing at same point with short refraction, uphole surveys of radial source and of surface source, the most appropriate method had been sorted out. Radial source uphole survey has been regarding the best practicable means in the complex area. Accurate surficial geology was very helpful to choosing of acquirement means and parameters. Basically the appropriate method of seismic acquirement has been built at Maichen area. 2. The seismic primary data has many, very strong and complex noise. By noise characteristic analysis in different domain, many means of denoising had been paralleled individual and joint application researched. As a result, the pre-stack multidomain joint denoise flow was the appropriate method. It can improve the seismic signal-to-noise ratio. 3. The problem of seismic static correction at Maichen Depression is very conspicuous. Many static correction methods had been tested individual and joint researched. The seismic data quality has been improved after choosing the appropriate combination of static correction flows. 4. Although the above-mentioned process are resultful, the seismic profile quality is just passable. Some reflector continuity and fault zone imagery are ambiguity. So it was the useful method to reduce the structural ambiguity during seismic interpretation that built-up geologic model in accord with real geologic character by areal structure study upon backbone seismic profiles. In the same way, traps have been assessed and drill targets have been selected.

准噶尔盆地南缘台13井区侏罗系油藏表征与建模

Junggar Basin has a large amount of recoverable reserves, However, due to the unfavorable factors, such as bad seismic data quality, complex structure with many faults and less wells, the exploration of oil and gas is still relatively limited, so advanced theoretical guidance and effective technical supports are desirable. Based on the theories of sedimentology, as well as comprehensive studies of outcrops, seismic data, drilling data and setting of this area, the paper establishes the isochronous correlation framework, and analyzes the sedimentary facies types and provenance direction, and obtains the profile and plain maps of the sedimentary facies combined with the logging constrained inversion. Then the paper analyzes the reservoir controlling factors, reservoir lithology attribute, 4-property relationship and sensibility based on the sedimentary facies research, and sets up a 3D geological model using facies controlled modeling. Finally, the paper optimizes some target areas with the conclusions of reservoir, structure and reservoir formation.Firstly, the paper establishs the isochronous correlation framework by the seismic data, drilling data and setting of this area. The sedimentary facies in Tai13 well block are braided river and meandering river according to the analysis of the lithology attribute, logging facies and sedimentary structure attribute of outcrop. The concept of “wetland” is put forward for the first time. The provenance direction of Badaowan and Qigu formation is obtained by the geology setting, sedimentary setting and paleocurrent direction. The paper obtains the profile and plain maps of the sedimentary facies from the sand value of the wells and the sand thickness maps from the logging constrained inversion. Then, this paper takes characteristics and control factors of the Jurassic reservoirs analysis on thin section observation, scanning transmission electron microscope observation and find out the petrology characteristics of reservoir, space types of reservoir and lithofacies division. In this area, primary pores dominate in the reservoir pores, which believed that sedimentation played the most important roles of the reservoir quality and diagenesis is the minor factor influencing secondary porosity. Using stochastic modeling technique，the paper builds quantitative 3-D reservoir Parameter. Finally, combined the study of structure and reservoir formation, the reservoir distribution regularity is concluded: (a) structures control the reservoir formation and accumulation. (b) Locating in the favorable sedimentary facies belt. And the area which meets these conditions mentioned above is a good destination for exploration.

Tropospheric aerosol detection over Southern Ireland using a backscatter Raman lidar

Lidar is an optical remote sensing instrument that can measure atmospheric parameters. A Raman lidar instrument (UCLID) was established at University College Cork to contribute to the European lidar network, EARLINET. System performance tests were carried out to ensure strict data quality assurance for submission to the EARLINET database. Procedures include: overlap correction, telecover test, Rayleigh test and zero bin test. Raman backscatter coefficients, extinction coefficients and lidar ratio were measured from April 2010 to May 2011 and February 2012 to June 2012. Statistical analysis of the profiles over these periods provided new information about the typical atmospheric scenarios over Southern Ireland in terms of aerosol load in the lower troposphere, the planetary boundary layer (PBL) height, aerosol optical density (AOD) at 532 nm and lidar ratio values. The arithmetic average of the PBL height was found to be 608 ± 138 m with a median of 615 m, while average AOD at 532 nm for clean marine air masses was 0.119 ± 0.023 and for polluted air masses was 0.170 ± 0.036. The lidar ratio showed a seasonal dependence with lower values found in winter and autumn (20 ± 5 sr) and higher during spring and winter (30 ± 12 sr). Detection of volcanic particles from the eruption of the volcano Eyjafjallajökull in Iceland was measured between 21 April and 7 May 2010. The backscatter coefficient of the ash layer varied between 2.5 Mm-1sr-1 and 3.5 Mm-1sr-1, and estimation of the AOD at 532 nm was found to be between 0.090 and 0.215. Several aerosol loads due to Saharan dust particles were detected in Spring 2011 and 2012. Lidar ratio of the dust layers were determine to be between 45 and 77 sr and AOD at 532 nm during the dust events range between 0.84 to 0.494.

Methodological considerations in reserve system selection: a case study of Malagasy Lemurs.

Although data quality and weighting decisions impact the outputs of reserve selection algorithms, these factors have not been closely studied. We examine these methodological issues in the use of reserve selection algorithms by comparing: (1) quality of input data and (2) use of different weighting methods for prioritizing among species. In 2003, the government of Madagascar, a global biodiversity hotspot, committed to tripling the size of its protected area network to protect 10% of the country’s total land area. We apply the Zonation reserve selection algorithm to distribution data for 52 lemur species to identify priority areas for the expansion of Madagascar’s reserve network. We assess the similarity of the areas selected, as well as the proportions of lemur ranges protected in the resulting areas when different forms of input data were used: extent of occurrence versus refined extent of occurrence. Low overlap between the areas selected suggests that refined extent of occurrence data are highly desirable, and to best protect lemur species, we recommend refining extent of occurrence ranges using habitat and altitude limitations. Reserve areas were also selected for protection based on three different species weighting schemes, resulting in marked variation in proportional representation of species among the IUCN Red List of Threatened Species extinction risk categories. This result demonstrates that assignment of species weights influences whether a reserve network prioritizes maximizing overall species protection or maximizing protection of the most threatened species.

The application of the ecological footprint in two Irish urban areas: Limerick and Belfast

The ecological footprint is now a widely accepted indicator of sustainable
development. Footprinting translates resource consumption into the land area
required to sustain it, and allows for an average per capita footprint for a region
or nation to be compared with the global average. This paper reports on a project
in which footprints were calculated for two Irish cities, namely Belfast in
Northern Ireland and Limerick in the Republic of Ireland for the year 2001. As
is frequently the case at sub-national scale, data quality and availability were
often problematic, and in general data gaps were filled by means of population
proxies or national averages. A range of methods was applied to convert
resource flows to land areas. Both footprints suggest that the lifestyles of citizens
of the cities use several times more land than their global share, as has been
found for other cities.

Evidence for relativistic features in the X-ray spectrum of Mrk 335

We present an analysis of hard X-ray features in the spectrum of the bright Sy 1 galaxy Mrk 335 observed by the XMM-Newton satellite. Our analysis confirms the presence of a broad, ionized Fe Ka emission line in the spectrum, first found by Gondoin et al. The broad line can be modelled successfully by relativistic accretion disc reflection models. This interpretation is unusually robust in the case of Mrk 335 because of the lack of any ionized ('warm') absorber and the absence a clear narrow core to the line. Partial covering by neutral gas cannot, however, be ruled out statistically as the origin of the broad residuals. Regardless of the underlying continuum we report, for the first time in this source, the detection of a narrow absorption feature at the rest frame energy of ~5.9 keV. If the feature is identified with a resonance absorption line of iron in a highly ionized medium, the redshift of the line corresponds to an inflow velocity of ~0.11-0.15c. We present a simple model for the inflow, accounting approximately for relativistic and radiation pressure effects, and use Monte Carlo methods to compute synthetic spectra for qualitative comparison with the data. This modelling shows that the absorption feature can plausibly be reproduced by infalling gas providing that the feature is identified with Fe xxvi. We require the inflowing gas to extend over a limited range of radii at a few tens of r to match the observed feature. The mass accretion rate in the flow corresponds to 60 per cent of the Eddington limit, in remarkable agreement with the observed rate. The narrowness of the absorption line tends to argue against a purely gravitational origin for the redshift of the line, but given the current data quality we stress that such an interpretation cannot be ruled out. © 2006 The Authors.

Accuracy assessment of depth estimates from variation in pre- and post-processing of multi-beam SONAR surveys in a fjord environment

Senior thesis written for Oceanography 445

Sistemas de informação ao público nos transportes públicos de passageiros: análise crítica

Dissertação para obtenção do grau de Mestre em Engenharia na Área de especialização em Vias de Comunicação e Transportes