Arc Root Motions In An Argon-Hydrogen Direct-Current Plasma Torch At Reduced Pressure

Arc root motions in generating dc argon-hydrogen plasma at reduced pressure are optically observed using a high-speed video camera. The time resolved angular position of the arc root attachment point is measured and analysed. The arc root movement is characterized as a chaotic and jumping motion along the circular direction on the anode surface.

Fracture Mechanisms And Size Effects Of Brittle Metallic Foams: In Situ Compression Tests Inside Sem

In situ compressive tests on specially designed small samples made from brittle metallic foams were accomplished in a loading device equipped in the scanning electron microscopy (SEM). Each of the small samples comprises only several cells in the effective test zone (ETZ), with one major cell in the middle. In such a system one can not only obtain sequential collapse-process images of a single cell and its cell walls with high resolution, but also correlate the detailed failure behaviour of the cell walls with the stress-strain response, therefore reveal the mechanisms of energy absorption in the mesoscopic scale. Meanwhile, the stress-strain behaviour is quite different from that of bulk foams in dimensions of enough large, indicating a strong size effect. According to the in situ observations, four failure modes in the cell-wall level were summarized, and these modes account for the mesoscopic mechanisms of energy absorption. Paralleled compression tests on bulk samples were also carried out, and it is found that both fracturing of a single cell and developing of fracture bands are defect-directed or weakness-directed processes. The mechanical properties of the brittle aluminum foams obtained from the present tests agree well with the size effect model for ductile cellular solids proposed by Onck et al. (C) 2008 Elsevier Ltd. All rights reserved.

An In-Situ Observation On Initial Aggregation Process Of Colloidal Particles Near Three-Phase Contact Line Of Air, Water And Vertical Substrate

The self-assembling process near the three-phase contact line of air, water and vertical substrate is widely used to produce various kinds of nanostructured materials and devices. We perform an in-situ observation on the self-assembling process in the vicinity of the three phase contact line. Three kinds of aggregations, i.e. particle-particle aggregation, particle-chain aggregation and chain-chain aggregation, in the initial stage of vertical deposition process are revealed by our experiments. It is found that the particle particle aggregation and the particle-chain aggregation can be qualitatively explained by the theory of the capillary immersion force and mirror image force, while the chain-chain aggregation leaves an opening question for the further studies. The present study may provide more deep insight into the self-assembling process of colloidal particles.

Arc Root Motion In An Argon-Hydrogen Dc Plasma Torch

Arc root motion on the anode surface of a dc non-transferred plasma torch was observed. Adding hydrogen changes the arc root attachment from a diffused type to a constricted type, and the arc root of Ar-H-2 plasma suddenly,jumps from one spot to another irregularly. Images of the arc root motions taken by a high-speed video camera are presented.

In Situ Observations On The Fracture Process Of Metallic Glassy Ribbons

Crack propagation and strain field evolution in two metallic glassy ribbons are studied using in situ scanning electron microscopy and the white digital speckle correlation method. Strain state at the crack tip, which depends heavily on the fracture toughness, plays a key role in fracture. A high degree of shear strain concentration in tough glassy ribbon can satisfy the critical shear strain, resulting in shear fracture, whereas a high degree of linear strain concentration in brittle glassy ribbon can initiate normal tensile fracture. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Caracterización numérica de germoplasma de Guanabana (Annona muricata L.) Muestreado in situ en el pacífico y norte de Nicaragua

El estudio se realizó para determinar variación in situ en chayote o pataste [ Sechium edule (Jacq.) Swartz] en la comunidad El Castillito, Las Sabanas, Madriz. Se muestrearon 35 accesiones de chayote, y se midieron 34 variables cuantitativas y cualitativas como tamaño de fruto y semilla, forma y color del fruto, presencia de espinas y cantidad de fibra, entre otras. Análisis descriptivo, componentes principales y conglomerados se aplicaron a dicha variables. Los frutos fueron de coloración crema hasta verde oscuro; redondos, ovoides y alargados; y con presencia de espinas. Los tres primeros componentes principales aislaron el 60 % de la variación total. El análisis de conglomerado (método Ward y Gower) agrupó a las accesiones en 6 grupos. Los materiales muestreados presentaron variación considerable en muchas características.

Caracterización numérica in situ de germoplasma de chayote (Sechium edule (Jacq.) Swartz), Comunidad El Castillito, Las Sabanas, Madriz

El estudio se realizó para determinar variación in situ en chayote o pataste [Sechium edule (Jacq.) Swartz] en la comunidad El Castillito, Las Sabanas, Madriz. Se muestrearon 35 accesiones de chayote, y se midieron 34 variables cuantitativas y cualitativas como tamaño de fruto y semilla, forma y color del fruto, presencia de espinas y cantidad de fibra, entre otras. Análisis descriptivo, componentes principales y conglomerados se aplicaron a dicha variables. Los frutos fueron de coloración crema hasta verde oscuro; redondos, ovoides y alargados; y con presencia de espinas. Los tres primeros componentes principales aislaron el 60 % de la variación total. El análisis de conglomerado (método Ward y Gower) agrupó a las accesiones en 6 grupos. Los materiales muestreados presentaron variación considerable en muchas características.

Análisis descriptivo de la degradación ruminal in situ de piscidium de Moringa oleífera en la Finca Santa Rosa, Managua, Nicaragua

Se realizó un estudio en la finca Santa Rosa propiedad de la Universidad Nacional Agraria ubicada en Managua-Nicaragua. El objetivo de este estudio fue realizar un análisis descriptivo de la composición química de la harina de piscidium de Moringa oleifera [Materia seca (MS), Proteína Bruta (PB), Fibra Cruda (FC), Extracto etéreo (EE) y Ceniza (CE)] así como la degradación ruminal in situ de la MS (DMS), PB (DPB) y FC (DFC) de la misma. Se utilizó la técnica de degradación in situ para evaluar la cinética de la degradabilidad de piscidium de Moringa en el rumen. Los tiempos de incubación evaluados fueron 3, 6, 9, 12, 24, 48, 72h. Los resultados obtenidos mostraron que la composición química de piscidium de Moringa presentó valores de 97.16% MS, 5.27% PB, 59.7% FC, 1.08% EE y CE de 8.18%. La DMS fue de 36.12% a las 72 h de incubación. La DPB tuvo una rápida degradabilidad en las primeras 6 h (29.75%) con un máximo de degradación potencial a las 72 h de 45.71%, sin embargo la DFC fue lenta durante las primeras 12 h, (6.77%), posterior a las mismas se incrementó la degradabilidad de la FC alcanzando un máximo potencial de degradabilidad de 19.38% a las 72 h de incubación. Los resultados indican que la harina de piscidium de Moringa es un alimento de mayor valor nutritivo que muchos alimentos toscos o lignificados, sin embargo para mejorar su aprovechamiento en la alimentación animal debe ser acompañado con una fuente nitrogenada o ser incluido como material de relleno en alimentos concentrados, bloques multinutricionales o amonificado.

[S_Ambrona_Insitu] Levantamiento fotogramétrico del yacimiento paleontológico “Museo in situ” de Ambrona (Soria)

[ES] Se trata de un área cubierta de unos 8 x 8 metros (la altura del techo es de unos 2,5 metros en la zona más baja) en la que se disponen varios huesos de diferentes especies entre los que destacan, por su porte, varios colmillos de elefante.

Report of the 2004 Workshop on In Situ Iron Enrichment Experiments in the Eastern and Western Subarctic Pacific

Foreword 1. BACKGROUND AND OBJECTIVES (pdf, 0.1 Mb) 2. 2004 WORKSHOP SUMMARY (pdf, < 0.1 Mb) 2.1. What have we learned from the enrichment experiments? 2.2 What are the outstanding questions? 2.3 Recommendations for SEEDS-II 3. EXTENDED ABSTRACTS OF THE 2004 WORKSHOP 3.1 Synthesis of the Iron Enrichment Experiments: SEEDS and SERIES (pdf, 0.5 Mb) Iron fertilization experiment in the western subarctic Pacific (SEEDS) by Atsushi Tsuda The response of N and Si to iron enrichment in the Northeast Pacific Ocean: Results from SERIES by David Timothy, C.S. Wong, Yukihiro Nojiri, Frank A. Whitney, W. Keith Johnson and Janet Barwell-Clarke 3.2 Biological and Physiological Responses (pdf, 0.2 Mb) Zooplankton responses during SEEDS by Hiroaki Saito Phytoplankton community response to iron and temperature gradient in the NW and NE subarctic Pacific Ocean by Isao Kudo, Yoshifumi Noiri, Jun Nishioka, Hiroshi Kiyosawa and Atsushi Tsuda SERIES: Copepod grazing on diatoms by Frank A. Whitney, Moira Galbraith, Janet Barwell-Clarke and Akash Sastri The Southern Ocean Iron Enrichment Experiment: The nitrogen uptake response by William P. Cochlan and Raphael M. Kudela 3.3 Biogeochemical Responses (pdf, 0.5 Mb) What have we learned regarding iron biogeochemistry from iron enrichment experiments? by Jun Nishioka, Shigenobu Takeda and W. Keith Johnson Iron dynamics and temporal changes of iron speciation in SERIES by W. Keith Johnson, C.S. Wong, Nes Sutherland and Jun Nishioka Dissolved organic matter dynamics during SEEDS and SERIES experiments by Takeshi Yoshimura and Hiroshi Ogawa Formation of transparent exopolymer particles during the in-situ iron enrichment experiment in the western subarctic Pacific (SEEDS) by Shigenobu Takeda, Neelam Ramaiah, Ken Furuya and Takeshi Yoshimura Atmospheric measurement by Mitsuo Uematsu 3.4 Prediction from Models (pdf, 0.3 Mb) Modelling iron limitation in the North Pacific by Kenneth L. Denman and M. Angelica Peña A proposed model of the SERIES iron fertilization patch by Debby Ianson, Christoph Voelker and Kenneth L. Denman 4. LIST OF PARTICIPANTS FOR THE 2004 WORKSHOP (pdf, < 0.1 Mb) APPENDIX 1 Report of the 2000 Planning Workshop on Designing the Iron Fertilization Experiment in the Subarctic Pacific (pdf, 1 Mb) APPENDIX 2 Terms of Reference for the Advisory Panel on Iron fertilization experiment in the subarctic Pacific Ocean (pdf, < 0.1 Mb) APPENDIX 3 Historical List of Advisory Panel Members on Iron fertilization experiment in the subarctic Pacific Ocean (pdf, < 0.1 Mb) APPENDIX 4 IFEP-AP Annual Reports (pdf, 0.1 Mb) APPENDIX 5 PICES Press Articles (pdf, 0.6 Mb) (194 page document)

In Situ Synthesis of Nanocrystalline Intermetallic Compound Layer During Surface Mechanical Attrition Treatment of Zirconium

The surface mechanical attrition treatment (SMAT) technique was developed to synthesize a nanocrystalline (NC) layer on the surface of metallic materials for upgrading their overall properties and performance. In this paper, by means of SMAT to a pure zirconium plate at the room temperature, repetitive multidirectional peening of steel shots (composition (wt%): 1C, 1.5Cr, base Fe) severely deformed the surface layer. A NC surface layer consisting of the intermetallic compound FeCr was fabricated on the surface of the zirconium. The microstructure characterization of the surface layer was performed by using X-ray diffraction analysis, optical microscopy, scanning and transmission electron microscopy observations. The NC surface layer was about 25 mu m thick and consisted of the intermetallic compound FeCr with an average grain size of 25 +/- 10 nm. The deformation-induced fast diffusion of Fe and Cr from the steel shots into Zr occurred during SMAT, leading to the formation of intermetallic compound. In addition, the NC surface layer exhibited an ultrahigh nanohardness of 10.2 GPa.