A full cost environmental accounting experiment

A lack of appropriate measurement techniques has constrained full cost environmental accounting (FCEA) experimentation. Yet, there has been little research on the applicability of valuation techniques recently developed by environmental economists within FLEA frameworks. This paper examines a reporting experiment using these valuation techniques that was undertaken by an Australian Government Department managing publicly owned forests. The FCEA experiment was ultimately not successful. However, the implementation experiences of the Department including the reactions of its managers and stakeholders provide an opportunity to critically reflect on the experimental outcomes to extend the current empirical knowledge of corporate social responsibility reporting. Such critical reflection has not been common in past FCEA experimentation. © 2005 Elsevier Ltd. All rights reserved.

Does pharmacogenomics provide an ethical challenge to the utilisation of cost-effectiveness analysis by public health systems?

Pharmacogenomics promotes an understanding of the genetic basis for differences in efficacy or toxicity of drugs in different individuals. Implementation of the outcomes of pharmacogenomic research into clinical practice presents a number of difficulties for healthcare. This paper aims to highlight one of the Unique ethical challenges which pharmacogenomics presents for the utilisation of cost-effectiveness analysis by public health systems. This paper contends that pharmacogenomics provides a challenge to fundamental principles which underlie most systems for deciding which drugs should be publicly subsidised. Pharmacogenomics brings into focus the conflict between equality and utility in the context of using cost-effectiveness analysis to aid distribution of a limited national drug budget.

Low-cost real-time gesture recognition

A major impediment to developing real-time computer vision systems has been the computational power and level of skill required to process video streams in real-time. This has meant that many researchers have either analysed video streams off-line or used expensive dedicated hardware acceleration techniques. Recent software and hardware developments have greatly eased the development burden of realtime image analysis leading to the development of portable systems using cheap PC hardware and software exploiting the Multimedia Extension (MMX) instruction set of the Intel Pentium chip. This paper describes the implementation of a computationally efficient computer vision system for recognizing hand gestures using efficient coding and MMX-acceleration to achieve real-time performance on low cost hardware.

Transaction attributes and buyer-supplier relationships in AMT acquisition and implementation:the case of Malaysia

This paper explores how transaction attributes of technology affect differences in the relationship between technology buyers and suppliers. It also examines the impact on performance of different patterns of relationship between technology buyers and suppliers. Data obtained from 147 manufacturing firms in Malaysia are used to test several hypotheses, which were derived from a review of the literature on technology, transaction cost theory and buyer–supplier relationships (BSR). The research results indicate that the higher the level of technological complexity, specificity and uncertainty, the more firms are likely to engage in a closer relationship with technology suppliers. Even though the majority of firms reported improvements in their performance, results indicate that firms demonstrating a closer relationship with technology suppliers are more likely to achieve higher levels of performance than those that do not. It is also shown that with high levels of transaction attribute, implementation performance suffers more when firms have weak relationships with technology suppliers than with moderate and low levels of transaction attribute.

An empirical study of the imperatives for a supply chain implementation project in Seagate Technology International

Singapore's electronics manufacturers are facing many questions. In the computer hard-drive industry, where the problem of obsolescence is common and where a product's lifecycle may be only six months, manufacturers are anxious to know what the next order-winning criteria will be. Since low labour costs are no longer a key factor, many organisations are developing their competencies in research and development, sales and marketing, logistics and supply chain management in order to maintain competitiveness. This paper illustrates how Seagate has envisaged a climate of cooperation and collaboration to better serve its customers in the areas of technology, cost and delivery. The paper is based on observations and findings following a longitudinal case study approach at the Seagate Storage Product Group (SPG) in Singapore. The seven-stage implementation framework adopted by Seagate in their SCM project is discussed, together with the process of how Seagate has created a paradigm shift towards a new culture of teamwork-based collaboration.

The precursors and impacts of BSR on AMT acquisition and implementation

This paper reports on the results of research into the connections between transaction attributes and buyer-supplier relationships (BSRs) in advanced manufacturing technology (AMT) acquisition and implementation. The investigation began by examining the impact of the different patterns of BSR on the performance of the AMT acquisition. In understanding the phenomena, the study drew upon and integrated the literature of transaction cost economics theory, BSRs, and AMT, and used this as the basis for a theoretical framework and hypotheses development. This framework was then empirically tested using data that were gathered through a questionnaire survey with 147 companies and analyzed using a structural equation modeling technique. The results of the analysis indicated that the higher the level of technological specificity and uncertainty, the more firms are likely to engage in a stronger relationship with technology suppliers. However, the complexity of the technology being implemented was associated with BSR only indirectly through its association with the level of uncertainty (which has a direct impact upon BSR). The analysis also provided strong support for the premise that developing strong BSR could lead to an improved performance in acquiring and implementing AMT. The implications of the study are offered for both the academic and practitioner audience.

Risk based decision support system for effective implementation of projects

Conventional project management techniques are not always sufficient to ensure time, cost and quality achievement of large-scale construction projects due to complexity in planning, design and implementation processes. The main reasons for project non-achievement are changes in scope and design, changes in government policies and regulations, unforeseen inflation, underestimation and improper estimation. Projects that are exposed to such an uncertain environment can be effectively managed with the application of risk management throughout the project's life cycle. However, the effectiveness of risk management depends on the technique through which the effects of risk factors are analysed/quantified. This study proposes the Analytic Hierarchy Process (AHP), a multiple attribute decision making technique, as a tool for risk analysis because it can handle subjective as well as objective factors in a decision model that are conflicting in nature. This provides a decision support system (DSS) to project management for making the right decision at the right time for ensuring project success in line with organisation policy, project objectives and a competitive business environment. The whole methodology is explained through a case application of a cross-country petroleum pipeline project in India and its effectiveness in project management is demonstrated.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

Implementation of a generic autonomic framework

Based on insights from the implementation of commercial products for data-centre resource management, we identified key challenges in the development of cost-effective autonomic solutions, and best practices for overcoming these challenges. In a related paper, we proposed a generic autonomic framework that complies with these best practices, and suggested ways in which existing technologies could be used to realise this framework. In this paper, we describe the actual implementation of our autonomic framework as a service-oriented architecture, and we show how the universal policy engine at its core can be configured to manage the allocation of server capacity to services of different priorities. This case study demonstrates the effectiveness of our generic approach to autonomic solution development in an area of great interest for commercial data centres, research laboratories and application service providers.

Buyer-supplier relationships in advanced manufacturing technology acquisition and implementation : a study in Malaysia

This thesis reports the results of research into the connections between transaction attributes and buyer-supplier relationships (BSR) in advanced manufacturing technology (AMT) acquisitions and implementation. It also examines the impact of the different patterns of BSR on performance. Specifically, it addresses the issues of how the three transaction attributes; namely level of complexity, level of asset specificity, and level of uncertainty, can affect the relationships between the technology buyer and suppler in AMT acquisition and implementation, and then to see the impact of different patterns of BSR on the two aspect of performance; namely technology and implementation performance. In understanding the pohenomena, the study mainly draws on and integrates the literature of transaction cost economics theory,buyer-supplier relationships and advanced manufacturing technology as a basis of theoretical framework and hypotheses development.data were gathered through a questionnaire survey with 147 responses and seven semi-structured interviews of manufacturing firms in Malaysia. Quantitative data were analysed mainly using the AMOS (Analysis of Moment Structure) package for structural equation modeling and SPSS (Statistical Package for Social Science) for analysis of variance (ANOVA). Data from interview sessions were used to develop a case study with the intention of providing a richer and deeper understanding on the subject under investigation and to offer triangulation in the research process. he results of the questionnaire survey indicate that the higher the level of technological specificity and uncertainty, the more firms are likely to engage in a closer relationship with technology suppliers.However, the complexity of the technology being implemented is associated with BSR only because it is associated with the level of uncertainty that has direct impact upon BSR.The analysis also provides strong support for the premise that developing strong BSR could lead to an improved performance. However, with high levels of transaction attribute, implementation performance suffers more when firms have weak relationships with technology suppliers than with moderate and low levels of transaction attributes. The implications of the study are offered for both the academic and practitioner audience. The thesis closes with reports on its limitations and suggestions for further research that would address some of these limitations.

Cost effectiveness of production control systems

This thesis deals with the problems associated with the planning and control of production, with particular reference to a small aluminium die casting company. The main problem areas were identified as: (a) A need to be able to forecast the customers demands upon the company's facilities. (b) A need to produce a manufacturing programme in which the output of the foundry (or die casting section) was balanced with the available capacity in the machine shop. (c) The need to ensure that the resultant system enabled the company's operating budget to have a reasonable chance of being achieved. At the commencement of the research work the major customers were members of the automobile industry and had their own system of forecasting, from which they issued manufacturing schedules to their component suppliers, The errors in the forecast were analysed and the distributions noted. Using these distributions the customer's forecast was capable of being modified to enable his final demand to be met with a known degree of confidence. Before a manufacturing programme could be developed the actual manufacturing system had to be reviewed and it was found that as with many small companies there was a remarkable lack of formal control and written data. Relevant data with regards to the component and the manufacturing process had therefore to be collected and analysed. The foundry process was fixed but the secondary machining operations were analysed by a technique similar to Component Flow Analysis and as a result the machines were arranged in a series of flow lines. A system of manual production control was proposed and for comparison, a local computer bureau was approached and a system proposed incorporating the production of additional management information. These systems are compared and the relative merits discussed and a proposal made for implementation.

Evaluating design implementation strategies using enterprise simulation

Concurrent engineering and design for manufacture and assembly strategies have become pervasive in use in a wide array of industrial settings. These strategies have generally focused on product and process design issues based on capability concerns. The strategies have been historically justified using cost savings calculations focusing on easily quantifiable costs such as raw material savings or manufacturing or assembly operations no longer required. It is argued herein that neither the focus of the strategies nor the means of justification are adequate. Product and process design strategies should include both capability and capacity concerns and justification procedures should include the financial effects that the product and process changes would have on the entire company. The authors of this paper take this more holistic view of the problem and examine an innovative new design strategy using a comprehensive enterprise simulation tool. The results indicate that both the design strategy and the simulator show promise for further industrial use. © 2001 Elsevier Science B.V. All rights reserved.

Rapid testing for group B streptococcus during labour: a test accuracy study with evaluation of acceptability and cost-effectiveness

OBJECTIVE: To determine the accuracy, acceptability and cost-effectiveness of polymerase chain reaction (PCR) and optical immunoassay (OIA) rapid tests for maternal group B streptococcal (GBS) colonisation at labour. DESIGN: A test accuracy study was used to determine the accuracy of rapid tests for GBS colonisation of women in labour. Acceptability of testing to participants was evaluated through a questionnaire administered after delivery, and acceptability to staff through focus groups. A decision-analytic model was constructed to assess the cost-effectiveness of various screening strategies. SETTING: Two large obstetric units in the UK. PARTICIPANTS: Women booked for delivery at the participating units other than those electing for a Caesarean delivery. INTERVENTIONS: Vaginal and rectal swabs were obtained at the onset of labour and the results of vaginal and rectal PCR and OIA (index) tests were compared with the reference standard of enriched culture of combined vaginal and rectal swabs. MAIN OUTCOME MEASURES: The accuracy of the index tests, the relative accuracies of tests on vaginal and rectal swabs and whether test accuracy varied according to the presence or absence of maternal risk factors. RESULTS: PCR was significantly more accurate than OIA for the detection of maternal GBS colonisation. Combined vaginal or rectal swab index tests were more sensitive than either test considered individually [combined swab sensitivity for PCR 84% (95% CI 79-88%); vaginal swab 58% (52-64%); rectal swab 71% (66-76%)]. The highest sensitivity for PCR came at the cost of lower specificity [combined specificity 87% (95% CI 85-89%); vaginal swab 92% (90-94%); rectal swab 92% (90-93%)]. The sensitivity and specificity of rapid tests varied according to the presence or absence of maternal risk factors, but not consistently. PCR results were determinants of neonatal GBS colonisation, but maternal risk factors were not. Overall levels of acceptability for rapid testing amongst participants were high. Vaginal swabs were more acceptable than rectal swabs. South Asian women were least likely to have participated in the study and were less happy with the sampling procedure and with the prospect of rapid testing as part of routine care. Midwives were generally positive towards rapid testing but had concerns that it might lead to overtreatment and unnecessary interference in births. Modelling analysis revealed that the most cost-effective strategy was to provide routine intravenous antibiotic prophylaxis (IAP) to all women without screening. Removing this strategy, which is unlikely to be acceptable to most women and midwives, resulted in screening, based on a culture test at 35-37 weeks' gestation, with the provision of antibiotics to all women who screened positive being most cost-effective, assuming that all women in premature labour would receive IAP. The results were sensitive to very small increases in costs and changes in other assumptions. Screening using a rapid test was not cost-effective based on its current sensitivity, specificity and cost. CONCLUSIONS: Neither rapid test was sufficiently accurate to recommend it for routine use in clinical practice. IAP directed by screening with enriched culture at 35-37 weeks' gestation is likely to be the most acceptable cost-effective strategy, although it is premature to suggest the implementation of this strategy at present.

Design and implementation of production systems for high variety electronics assembly

Information technology companies are having to broaden their overall strategic view in deference to the premise that it is better to be market-driven than technology-led. Cost and technical performance are no longer the only considerations, as quality and service now demand equal recognition. The production of a high volume single item has given way to that of low volume multiple items, which in turn requires some modification of production systems and brings flexible manufacturing, Just-in-Time production and total quality control into sharper focus for the achievement of corporate objectives.

Process re-engineering for effective implementation of projects

Time, cost and quality are the prime objectives of any project. Unfortunately, today’s project management does not always ensure the realisation of these objectives. The main reasons of project non-achievement are changes in scope and design, changes in Government policies and regulations, unforeseen inflation, under-estimation and mis-estimation. An overall organisational approach with the application of appropriate management philosophies, tools and techniques can only solve the problem. The present study establishes a methodology for achieving success in implementing projects using a business process re-engineering (BPR) framework. Internal performance characteristics are introspected through condition diagnosis that identifies and prioritises areas of concern requiring attention. Process re-engineering emerges as a most critical area for immediate attention. Project process re-engineering is carried out by eliminating non-value added activities, taking up activities concurrently by applying information systems rigorously and applying risk management techniques throughout the project life cycle. The overall methodology is demonstrated through applications to cross country petroleum pipeline project organisation in an Indian scenario.