Histologic study of use of microfibrillar collagen hemostat in rat dental sockets

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Description of the gamonts of a small species of Hepatozoon sp (Apicomplexa, Hepatozoidae) found in Crotalus durissus terrificus (Serpentes, Viperidae)

A small species of the genus Hepatozoon found in a specimen of Crotalus durissus terrificus from the Botucatu region, São Paulo State, Brazil is described. The morphologic alterations induced in the snake's erythrocytes by the presence of this parasite are described. Morphology and morphometric analyses were performed using the Qwin Lite 2.5 computerized image analysis system (Leica). The Hepatozoon possessed a small and short body (8.1+/-0.5 mum long and 3.8+/-0.4 mum wide), with round extremities. The cytoplasm varied from pale blue to basophilic and had no granulations. Its nucleus was large, occupied a large area of the cytoplasm, and was irregular in shape and not condensed. Despite its small size, this parasite induced important changes in the host cell. Total parasitemia observed was 56.6%.

The effect of mold temperature on castability of CPTi and Ti-6Al-4V castings into phosphate bonded investment materials

Objective. The aim of this study was to evaluate the castability of CP titanium and Ti-6Al-4V alloy castings into Rematitan Plus investment at three different mold temperatures.Methods. A nylon mesh pattern (20 mm with 64 squares and wire of 0.7 mm in diameter) was used for the castability testing. Initially, an image of the wax pattern was obtained by means of a digital camera and the total extension of filaments (mm) was then measured, using the Leica Qwin image analysis system. The mesh sprued was placed in the Rematitan Plus investment material and the castings were made in a Discovery Plasma machine at three different mold temperatures: 430 degrees C (control group), 480 degrees C or 530'C. Ten castings were made for each temperature. The images of the castings were analyzed (Leica Qwin) and the castability index determined by the number of the completely cast segments as a percentage of the wax pattern. Data were analyzed by two-way ANOVA and Tukey's multiple comparison test (a = 0.05) using materials and temperatures as discriminating variables.Results. The Ti-6Al-4V alloy (60.86%) presented a better castability index than CP Ti (48.44%) (p < 0.000001). For CP Ti, the temperature of 530 degrees C (23.96%) presented better castability than at other temperatures, 480 degrees C (14.66%) and 430 degrees C (12.54%), with no difference between them (p < 0.001). For Ti-6Al-4V alloy, there was a statistically significant difference among the three temperatures: 530 degrees C (28.36%) > 480 degrees C (19.66%) > 430 degrees C (15.97%) (p < 0.002).Significance. Within the limitations of this study, the increase in the mold temperature of the Rematitan Plus investment resulted in a better castability index for both materials, and Ti-6Al-4V presented a better castability index than CP Ti. (c) 2005 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Exfoliative cytology of the oral mucosa in type II diabetic patients: morphology and cytomorphometry

Background: In recent years, important advances have occurred in the determination of diagnostic criteria for the disease diabetes mellitus and in new strategies for its treatment. The purpose of this research was to develop a new method for diabetes diagnosis by microscopic and cytomorphometric analyses of the oral epithelium. Methods: the smears were obtained from three distinct oral sites: buccal mucosa (cheek), tongue dorsum, and floor of the mouth in 10 control individuals and 10 type II diabetic patients. The oral smears were stained with Papanicolaou EA-36 solution. The nuclear (NA) and cytoplasmic (CA) areas were evaluated from 50 integral cells predominant in each oral site by the use of the KS 300(TM) image analysis system (Carl Zeiss, Germany), by which the cytoplasmic/nuclear ratio (C/N) was calculated. Results: the results showed that: (i) the epithelial cells of the diabetic group exhibited figures of binucleation and occasional karyorrhexis in all layers; (ii) the NA was markedly higher (P<0.05) in the diabetic group; (iii) the CA did not exhibit a statistically significant difference (P>0.05) between these two groups; and (iv) the C/N mean was 37.4% lower in the type II diabetic group. Conclusions: These results associated with clinical observations suggest that diabetes mellitus can produce alterations in oral epithelial cells, detectable by microscopy and cytomorphometry, which can be used in the diagnosis of this disease.

Some structural and physicochemical characteristics of tuber and root starches

Starches from six different species (cassava, arrowroot, sweet potato, yam, canna and ginger) were isolated and some structural and physicochemical characteristics analysed and correlated. Phosphorous and amylose contents were determined using a colorimetric method and measuring iodine affinity, respectively. Molecular weight distributions of starches were analysed by Sepharose CL 2B. Granular shape and size distribution were performed using an image analyser system attached to a light microscope. Swelling power was determined at 60, 70, 80 and 90 degrees C. Pasting and thermal properties were measured using a rapid viscoanalyser, and a differential scanning calorimeter, respectively. Phosphorous content varied from 0.007 to 0.031% for cassava and canna starches, respectively. Yam, canna and ginger starches displayed higher amylose contents (32.6, 31.7 and 26.5%, respectively) than cassava, arrowroot and sweet potato starches (19.8, 20.8 and 22.6%, respectively). These last three starches displayed amylose molecules of higher molecular weight than those shown for yam, canna and ginger starches. Canna starch showed higher proportions of longer branch chains of amylopectin than others starches. The size and shape of granules were quite variable among all starches and the average size of granules varied from 13.9 to 42.3 mu m for sweet potato and canna, respectively. Swelling power, pasting, and thermal properties were affected by structural characteristics of the starches.

Collagen is reduced and disrupted in human aneurysms and dissections of ascending aorta

In ascending aorta aneurysms, there is an enlargement of the whole vessel, whereas aortic dissections (ADs) are characterized by the cleavage of the wall into 2 sheets at the external half. We searched if alterations in collagen could be related to these diseases. Sections of aortas from 14 case patients with acute dissections, 10 case patients with aneurysms, and 9 control subjects were stained with picrosirius. Slides were analyzed under polarized microscopy to evaluate the structure of collagen fibers. The proportion of collagen was calculated in each half of the medial layer by color detection in a computerized image analysis system. Collagen appearance under polarized light was consistent with collagenolysis. The mean collagen proportions at the inner and outer halves, respectively, were 0.50 +/- 0.13 and 0.40 +/- 0.08 in the control group, 0.20 +/- 0.10 and 0.18 +/- 0.12 in the AD group, and 0.33 +/- 0.12 and 0.19 +/- 0.12 in the aneurysm group. The AD (P < .01) and control (P = .04) groups had less collagen at the external half, no difference was found in the aneurysm group (P = .71). In both halves, there was less collagen in the case patients than in the control subjects (all P < .01), but at the internal half, the decrease was significantly greater in the case patients with aneurysms than in those with dissections (P = .03; at the external half, P = .99). Aortic dissections and aneurysms show a decrease in collagen content that could be related to a weakness of the wall underlying the diseases, but the locations of the decrease differ: in dissections, it is situated mostly at the external portion of the media (site of cleavage), whereas in aneurysms, it is more diffuse, consistent with the global enlargement. (c) 2008 Elsevier B.V. All rights reserved.

Comprimento da peça intermediária de espermatozóides bovinos e suas relações com características do sêmen e fertilidade

With the objective of identifying predictors of fertility in bulls, the correlation coefficients of the midpiece length of bovine spermatozoa with semen traits and fertility were estimated. Data were obtained from semen samples of 50 crossbred bulls submitted to a progeny test. The midpiece length was determined in 40 midpieces of each bull through a image analysis system (Videoplan). Besides the physical traits before and after semen freezing, the oxygen consumption rate and the cytochemical activity index were observed. The correlation coefficients were low and non-significant (P> 0.05), indicating that the midpiece length is not a good predictor of fertility.

Estudo biológico e morfométrico dos estádios ninfais de Rhodnius neglectus Lent, 1954 (Hemiptera, Reduviidae)

The following parameters of the biological cycle of the Rhodnius neglectus were determined under a temperature of 28°C and relative humidity of the air varying between 52-94%: a) average period of incubation: 13.67 days; b) rate of the eggs eclosion: 86.18%; c) average period of growth of the 1st, 2nd, 3rd, 4th, 5th instar nymphs: 18.91, 15.19, 21.38, 21.34, 30.43 days, respectively; d) percentage of death in the instar nymphs: 13.82, 18.26, 9.95, 8.78, 15.06% respectively; e) percentage of changes per instar nymphs: 86.18, 81.74, 90.05, 91.22, 84.94% respectively. The morphometric study with the stereoscopic microscope and Leica image analyses system, using the Qwin software, of the five instar nymphs showed that in the five instar nymphs a gradual growth of the head, thorax and abdomen occurs. In all the instars the abdomen is the largest segment. In the four first instars the head is larger than the thorax. In the fifth instar the head and the thorax present equivalent sizes.

A comparison of human and porcine acellular dermal tissues in the subcutaneous space of a rat model

The study compared the host response to a human and a porcine acellular dermal tissue implanted in the subcutaneous space of a rat model. The human and porcine acellular grafts were surgically implanted in the subcutaneous tissue of rats (5 rats/group) and the materials were evaluated at 7, 15, 30, 60 and 180 postoperative days (PO). The histological immune response was quantified using a digital image analysis system, which evaluated the number of vessels present in the implants and in the surrounding soft tissue, the area of inflammatory cell infiltration in the grafts, the width of the capsular formation present around the tissues and the area of implants absorbed. The data were submitted to statistical analysis. Light microscopy showed mononuclear cellular infiltration, the presence of a capsular formation surrounding the grafts and the presence of vacuolar structures (optically empty spaces) inside the implants. The image analysis comparing both materials showed significant inflammatory cells in the human graft at 15 and 30 PO, thicker capsular formation in the porcine tissue at 60 PO, increased number of vessels inside the implants and in the surrounding tissues in the porcine graft and a similar absorption pattern in both materials at 180 PO. The histological findings showed that both tissues were well-tolerated when implanted in the subcutaneous tissue of rats, allowing us to consider the porcine acellular dermal graft as a provisional alternative material for reconstructive plastic surgery. Copyright © 2005 Taylor & Francis LLC.

Internal adaptation of cast titanium crowns

As the adaptation of titanium crowns obtained by Rematitan Plus investment, specific for titanium, is not recognized to be suitable, this study evaluated the effect of the concentration of the specific liquid and the temperature of the mold of investments on the internal misfit of crowns cast on commercially pure titanium. Individual dies of epoxy resin were obtained, representing teeth prepared for full-crown restoration with a 6-degree axial surface convergence angle and shoulder (1.0 mm). For the waxing of each crown, a ring-shaped stainless steel matrix (8.0mm internal diameter; 7.5 mm height) was adapted above the individual dies of epoxy resin. The Rematian Plus investment was mixed according to the manufacturer's instructions using two different concentrations of the specific liquid: 100%, 75%. Casting was performed in a Discovery Plasma Ar-arc vacuum-pressure casting machine with molds at temperatures of 430°C, 515°C and 600°C. The crowns were cleaned individually in a solution (1% HF + 13% HNO3) for 10 min using a ultrasonic cleaner, with no internal adaptations, and luted with zinc phosphate cement under a 5 kg static load. The crown and die assemblies were embedded in resin and sectioned longitudinally. The area occupied by cement was observed using stereoscopic lens (10X) and measured by the Leica Qwin image analysis system (mm2). The data for each experimental condition (n=8) were analyzed by Kruskal-Wallis non-parametric test (á=0.05). The results showed that liquid dilution and the increase in mold temperature did not significantly influence the levels of internal fit of the cast titanium crowns. The lowest means (±SD) of internal misfit were obtained for the 430°C/100%: (7.25 mm2 ±1.59) and 600°C/100% (8.8 mm2 ±2.25) groups, which presented statistically similar levels of internal misfit.

Effect of phosphate-bonded investments on titanium reaction layer and crown fit

This study analyzed the reaction layer and measured the marginal crown fit of cast titanium applied to different phosphate-bonded investments, prepared under the following conditions (liquid concentration/casting temperature): Rema Exakt (RE) - 100%/237°C, 75%/287°C, Castorit Super C (CS)-100%/70°C, 75%/141°C and Rematitan Plus (RP)-100%/430°C (special to titanium cast, as the control group). The reaction layer was studied using the Vickers hardness test, and analyzed by two way ANOVA and Tukey's HSD tests (α = 0.05). Digital photographs were taken of the crowns seated on the die, the misfit was measured using an image analysis system and One-way ANOVA, and Tukey's test was applied (α = 0.05). The hardness decreased from the surface (601.17 VHN) to 150 μm (204.03 VHN). The group CS 75%/141°C presented higher hardness than the other groups, revealing higher surface contamination, but there were no differences among the groups at measurements deeper than 150 μm. The castings made with CS - 100%/70°C presented the lowest levels of marginal misfit, followed by RE -100%/237°C. The conventional investments CS (100%) and RE (100%) showed better marginal fit than RP, but the CS (75%) had higher surface contamination.

Development of a burner to measure biogas generation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Evolução do processo de espermiação em machos de Piau, Leporinus macrocephalus, hormonalmente induzidos à reprodução

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desenvolvimento de uma Plataforma de Software para a Modelagem Digital de Terrenos baseada em TIN

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise discriminatória de alvos da paisagem urbana em imagens aéreas multiespectrais

Pós-graduação em Ciências Cartográficas - FCT