Modeling Allee Effect from Beta(p, 2) Densities

In this work we develop and investigate generalized populational growth models, adjusted from Beta(p, 2) densities, with Allee effect. The use of a positive parameter leads the presented generalization, which yields some more flexible models with variable extinction rates. An Allee limit is incorporated so that the models under study have strong Allee effect.

The use of non-standard CT conversion ramps for Monte Carlo verification of 6 MV prostate IMRT plans

Monte Carlo (MC) dose calculation algorithms have been widely used to verify the accuracy of intensity-modulated radiotherapy (IMRT) dose distributions computed by conventional algorithms due to the ability to precisely account for the effects of tissue inhomogeneities and multileaf collimator characteristics. Both algorithms present, however, a particular difference in terms of dose calculation and report. Whereas dose from conventional methods is traditionally computed and reported as the water-equivalent dose (Dw), MC dose algorithms calculate and report dose to medium (Dm). In order to compare consistently both methods, the conversion of MC Dm into Dw is therefore necessary. This study aims to assess the effect of applying the conversion of MC-based Dm distributions to Dw for prostate IMRT plans generated for 6 MV photon beams. MC phantoms were created from the patient CT images using three different ramps to convert CT numbers into material and mass density: a conventional four material ramp (CTCREATE) and two simplified CT conversion ramps: (1) air and water with variable densities and (2) air and water with unit density. MC simulations were performed using the BEAMnrc code for the treatment head simulation and the DOSXYZnrc code for the patient dose calculation. The conversion of Dm to Dw by scaling with the stopping power ratios of water to medium was also performed in a post-MC calculation process. The comparison of MC dose distributions calculated in conventional and simplified (water with variable densities) phantoms showed that the effect of material composition on dose-volume histograms (DVH) was less than 1% for soft tissue and about 2.5% near and inside bone structures. The effect of material density on DVH was less than 1% for all tissues through the comparison of MC distributions performed in the two simplified phantoms considering water. Additionally, MC dose distributions were compared with the predictions from an Eclipse treatment planning system (TPS), which employed a pencil beam convolution (PBC) algorithm with Modified Batho Power Law heterogeneity correction. Eclipse PBC and MC calculations (conventional and simplified phantoms) agreed well (<1%) for soft tissues. For femoral heads, differences up to 3% were observed between the DVH for Eclipse PBC and MC calculated in conventional phantoms. The use of the CT conversion ramp of water with variable densities for MC simulations showed no dose discrepancies (0.5%) with the PBC algorithm. Moreover, converting Dm to Dw using mass stopping power ratios resulted in a significant shift (up to 6%) in the DVH for the femoral heads compared to the Eclipse PBC one. Our results show that, for prostate IMRT plans delivered with 6 MV photon beams, no conversion of MC dose from medium to water using stopping power ratio is needed. In contrast, MC dose calculations using water with variable density may be a simple way to solve the problem found using the dose conversion method based on the stopping power ratio.

Sistema de Visão Stereo Ativo aplicado aos robôs do ISePorto

A presente dissertação endereça o desenvolvimento de um sistema de visão stereo ativo para os robôs de futebol robótico da equipa ISePorto do ISEP, de modo a que estes tirem o máximo partido das câmaras rotativas neles existentes. Este trabalho surge da necessidade de melhorar a capacidade de perceção do ambiente por parte dos robôs, principalmente da perceção da bola quando não está no plano do campo e dos robôs adversários. Esta necessidade surge devido ao aumento da dinâmica que se tem vindo a veri car ultimamente nas competições. Para tal, foram estudados algumas trabalhos relacionados no que diz respeito a sistemas de visão stereo com baselines variáveis e eixos de rotação em ambas as câmaras, bem como fundamentos de visão stereo. Foi proposta uma arquitetura para o sistema de visão ativo de modo a ser aplicado em qualquer robô da equipa MSL (Middle Size League). Para tornar possível a implementação desta arquitetura foi desenvolvido um procedimento para a calibração e determinação em tempo real dos parâmetros extrínsecos do par stereo em função da posição angular dos eixos rotativos do robô. O sistema de visão foi também dotado de capacidade de sincronismo e foram implementadas funcionalidades ao nível de software que possibilitam a deteção de objetos na imagem, a correspondência de objetos presentes nas imagens de ambas as câmaras e consequentemente a determinação das posições tridimensionais desses objetos relativamente ao robô. O sistema desenvolvido foi testado e validado em cenário MSL ao nível de perceção da bola, robôs adversários e linhas do campo. Os resultados obtidos apresentam uma melhoria signi cativa, face à implementação atual dos robôs, na perceção tridimensional da bola quando não está no plano do campo, e dos robôs adversários.

Viability of the use of an A-SiC:H multiplayer device in a domestic VLC application

In this paper the viability of an integrated wavelength optical filter and photodetector for visible light communication (VLC) is discussed. The proposed application uses indoor warm light lamps lighting accomplished by ultra-bright light-emitting diodes (LEDs) pulsed at frequencies higher than the ones perceived by the human eye. The system was analyzed at two different wavelengths in the visible spectrum (430 nm and 626 nm) with variable optical intensities. The signals were transmitted into free space and measured using a multilayered photodetector based on a-SiC:H/a-Si:H. The detector works as an optical filter with controlled wavelength sensitivity through the use of optical bias. The output photocurrent was measured for different optical intensities of the transmitted optical signal and the extent of each signal was tested. The influence of environmental fluorescent lighting was also analysed in order to test the strength of the system. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Projecto de execução do centro comercial Mercado da Praia: Cidade da Praia: Cabo Verde

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil

Projeto e implementação de um pré-regulador de fator de potência com controlo digital

Hoje em dia as fontes de alimentação possuem correção do fator de potência, devido às diversas normas regulamentares existentes, que introduziram grandes restrições no que respeita à distorção harmónica (THD) e fator de potência (FP). Este trabalho trata da análise, desenvolvimento e implementação de um Pré-Regulador de fator de potência com controlo digital. O controlo digital de conversores com recurso a processamento digital de sinal tem vindo a ser ao longo dos últimos anos, objeto de investigação e desenvolvimento, estando constantemente a surgirem modificações nas topologias existentes. Esta dissertação tem como objetivo estudar e implementar um Pré-Regulador Retificador Boost e o respetivo controlo digital. O controlo do conversor é feito através da técnica dos valores médios instantâneos da corrente de entrada, desenvolvido através da linguagem de descrição de hardware VHDL (VHSIC HDL – Very High Speed Integrated Circuit Hardware Description Language) e implementado num dispositivo FPGA (Field Programmable Gate Array) Spartan-3E. Neste trabalho são apresentadas análises matemáticas, para a obtenção das funções de transferência pertinentes ao projeto dos controladores. Para efetuar este controlo é necessário adquirir os sinais da corrente de entrada, tensão de entrada e tensão de saída. O sinal resultante do módulo de controlo é um sinal de PWM com valor de fator de ciclo variável ao longo do tempo. O projeto é simulado e validado através da plataforma MatLab/Simulink e PSIM, onde são apresentados resultados para o regime permanente e para transitórios da carga e da tensão de alimentação. Finalmente, o Pré-Regulador Retificador Boost controlado de forma digital é implementado em laboratório. Os resultados experimentais são apresentados para validar a metodologia e o projeto desenvolvidos.

Sondagem de Belverde (Cenozóico, Península de Setúbal, Portugal). Diagrafias

In the aim of the project "Recognition of the Miocene of the distal region of the Lower Tagus Basin through a borehole with continuous sampling", Temperature, Natural Gamma Ray, Neutron (almost in all the borehole), Sonic, SP and SPR (in two small sections in upper and lower parts of the Miocene Series) geophysical logs were carried on. Interpretation of those logs and comparison with chronological, lithostratigraphical, micropaleontological and clay mineraIs data; helped in the definition of depositional sequences and to obtain paleoenvironmental reconstructions that could lead to a better understanding of the evolution of the Setúbal Península and Lisboa regions Miocene gulf. Log data agree with the lithologic succession observed in the Belverde borehole, essentially silty sandstones/sandy siltstones (with variable clay content) to clays, often with marly intercalations. Sonic logs (and Neutron logs, in general) reflect the sediments porosity. The higher acoustic velocities are often related to compact/massive layers as claystones and/or limestones and rather fossiliferous marly layers. Lower values are obtained for porous, silty sandstones (fossiliferous and with scarce clay content) and bio-calcareous sandstones. As indicative, we obtained the mean values of 2500-3000m/s for the higher velocities and 1300-1600m/s for the lowest ones. ln Natural Gamma Ray log, the radiation peaks can be correlated to often fossiliferous marly micaceous layers. Radioactive micas are present. It seems that the gamma peaks and the depositional sequences previously defined for the Lower Tagus Basin (see Antunes et al., 1999, 2000; Pais et al., 2002) can be correlated, taking also into account the whole available micropaleontological, palynological and isotopic evidence.

Visible range plasmonic effect produced by aluminium nanoparticles embedded in amorphous silicon

We present results, obtained by means of an analytic study and a numerical simulation, about the resonant condition necessary to produce a Localized Surface Plasmonic Resonance (LSPR) effect at the surface of metal nanospheres embedded in an amorphous silicon matrix. The study is based on a Lorentz dispersive model for a-Si:H permittivity and a Drude model for the metals. Considering the absorption spectra of a-Si:H, the best choice for the metal nanoparticles appears to be aluminium, indium or magnesium. No difference has been observed when considering a-SiC:H. Finite-difference time-domain (FDTD) simulation of an Al nanosphere embedded into an amorphous silicon matrix shows an increased scattering radius and the presence of LSPR induced by the metal/semiconductor interaction under green light (560 nm) illumination. Further results include the effect of the nanoparticles shape (nano-ellipsoids) in controlling the wavelength suitable to produce LSPR. It has been shown that is possible to produce LSPR in the red part of the visible spectrum (the most critical for a-Si:H solar cells applications in terms of light absorption enhancement) with aluminium nano-ellipsoids. As an additional results we may conclude that the double Lorentz-Lorenz model for the optical functions of a-Si:H is numerically stable in 3D simulations and can be used safely in the FDTD algorithm. A further simulation study is directed to determine an optimal spatial distribution of Al nanoparticles, with variable shapes, capable to enhance light absorption in the red part of the visible spectrum, exploiting light trapping and plasmonic effects. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Depressão : detecção, diagnóstico e tratamento. Estudo de prevalência e despite das perturbações depressivas e tratamento

RESUMO:A depressão clínica é uma patologia do humor, dimensional e de natureza crónica, evoluindo por episódios heterogéneos remitentes e recorrentes, de gravidade variável, correspondendo a categorias nosológicas porventura artificiais mas clinicamente úteis, de elevada prevalência e responsável por morbilidade importante e custos sociais crescentes, calculando-se que em 2020 os episódios de depressão major constituirão, em todo o mundo, a segunda causa de anos de vida com saúde perdidos. Como desejável, na maioria dos países os cuidados de saúde primários são a porta de entrada para o acesso à recepção de cuidados de saúde. Cerca de 50% de todas as pessoas sofrendo de depressão acedem aos cuidados de saúde primários mas apenas uma pequena proporção é correctamente diagnosticada e tratada pelos médicos prestadores de cuidados primários apesar dos tratamentos disponíveis serem muito efectivos e de fácil aplicabilidade. A existência de dificuldades e barreiras a vários níveis – doença, doentes, médicos, organizações de saúde, cultura e sociedade – contribuem para esta generalizada ineficiência de que resulta uma manutenção do peso da depressão que não tem sido possível reduzir através das estratégias tradicionais de organização de serviços. A equipa comunitária de saúde mental e a psiquiatria de ligação são duas estratégias de intervenção com desenvolvimento conceptual e organizacional respectivamente na Psiquiatria Social e na Psicossomática. A primeira tem demonstrado sucesso na abordagem clínica das doenças mentais graves na comunidade e a segunda na abordagem das patologias não psicóticas no hospital geral. Todavia, a efectividade destas estratégias não se tem revelado transferível para o tratamento das perturbações depressivas e outras patologias mentais comuns nos cuidados de saúde primários. Novos modelos de ligação e de trabalho em equipa multidisciplinar têm sido demonstrados como mais eficazes e custo-efectivos na redução do peso da depressão, ao nível da prestação dos cuidados de saúde primários, quando são atinentes com os seguintes princípios estratégicos e organizacionais: detecção sistemática e abordagem da depressão segundo o modelo médico, gestão integrada de doença crónica incluindo a continuidade de cuidados mediante colaboração e partilha de responsabilidades intersectorial, e a aposta na melhoria contínua da qualidade. Em Portugal, não existem dados fiáveis sobre a frequência da depressão, seu reconhecimento e a adequação do tratamento ao nível dos cuidados de saúde primários nem se encontra validada uma metodologia de diagnóstico simples e fiável passível de implementação generalizada. Foi realizado um estudo descritivo transversal com os objectivos de estabelecer a prevalência pontual de depressão entre os utentes dos cuidados de saúde primários e as taxas de reconhecimento e tratamento pelos médicos de família e testar metodologias de despiste, com base num questionário de preenchimento rápido – o WHO-5 – associado a uma breve entrevista estruturada – o IED. Foram seleccionados aleatoriamente 31 médicos de família e avaliados 544 utentes consecutivos, dos 16 aos 90 anos, em quatro regiões de saúde e oito centros de saúde dotados com 219 clínicos gerais. Os doentes foram entrevistados por psiquiatras, utilizando um método padronizado, o SCAN, para diagnóstico de perturbação depressiva segundo os critérios da 10ª edição da Classificação Internacional de Doenças. Apurou-se que 24.8% dos utentes apresentava depressão. No melhor dos cenários, menos de metade destes doentes, 43%, foi correctamente identificada como deprimida pelo seu médico de família e menos de 13% dos doentes com depressão estavam bem medicados com antidepressivo em dose adequada. A aplicação seriada dos dois instrumentos não revelou dificuldades tendo permitido a identificação de pelo menos 8 em cada 10 doentes deprimidos e a exclusão de 9 em cada 10 doentes não deprimidos. Confirma-se a elevada prevalência da patologia depressiva ao nível dos cuidados primários em Portugal e a necessidade de melhorar a capacidade diagnóstica e terapêutica dos médicos de família. A intervenção de despiste, que foi validada, parece adequada para ser aplicada de modo sistemático em Centros de Saúde que disponham de recursos técnicos e organizacionais para o tratamento efectivo dos doentes com depressão. A obtenção da linha de base de indicadores de prevalência, reconhecimento e tratamento das perturbações depressivas nos cuidados de saúde primários, bem como a validação de instrumentos de uso clínico, viabiliza a capacitação do sistema para a produção de uma campanha nacional de educação de grande amplitude como a proposta no Plano Nacional de Saúde 2004-2010.------- ABSTRACT: Clinical depression is a dimensional and chronic affective disorder, evolving through remitting and recurring heterogeneous episodes with variable severity corresponding to clinically useful artificial diagnostic categories, highly prevalent and producing vast morbidity and growing social costs, being estimated that in 2020 unipolar major depression will be the second cause of healthy life years lost all over the world. In most countries, primary care are the entry point for access to health care. About 50% of all individuals suffering from depression within the community reach primary health care but a smaller proportion is correctly diagnosed and treated by primary care physicians though available treatments are effective and easily manageable. Barriers at various levels – pertaining to the illness itself, to patients, doctors, health care organizations, culture and society – contribute to the inefficiency of depression management and pervasiveness of depression burden, which has not been possible to reduce through classical service strategies. Community mental health teams and consultation-liaison psychiatry, two conceptual and organizational intervention strategies originating respectively within social psychiatry and psychosomatics, have succeeded in treating severe mental illness in community and managing non-psychotic disorders in the general hospital. However, these strategies effectiveness has not been replicated and transferable for the primary health care setting treatment of depressive disorders and other common mental pathology. New modified liaison and multidisciplinary team work models have been shown as more efficacious and cost-effective reducing depression burden at the primary care level namely when in agreement with principles such as: systematic detection of depression and approach accordingly to the medical model, chronic llness comprehensive management including continuity of care through collaboration and shared responsibilities between primary and specialized care, and continuous quality improvement. There are no well-founded data available in Portugal for depression prevalence, recognition and treatment adequacy in the primary care setting neither is validated a simple, teachable and implementable recognition and diagnostic methodology for primary care. With these objectives in mind, a cross-sectional descriptive study was performed involving 544 consecutive patients, aged 16-90 years, recruited from the ambulatory of 31 family doctors randomized within the 219 physicians working in eight health centres from four health regions. Screening strategies were tested based on the WHO-5 questionnaire in association with a short structured interview based on ICD-10 criteria. Depression ICD-10 diagnosis was reached according to the gold standard SCAN interview performed by trained psychiatrists. Any depressive disorder ICD-10 diagnosis was present in 24.8% of patients. Through the use of favourable recognition criteria, 43% of the patients were correctly identified as depressed by their family doctor and about 13% of the depressed patients were prescribed antidepressants at an adequate dosage. The serial administration of both instruments – WHO-5 and short structured interview – was feasible, allowing the detection of eight in ten positive cases and the exclusion of nine in ten non-cases. In Portugal, at the primary care level, high depressive disorder prevalence is confirmed as well as the need to improve depression diagnostic and treatment competencies of family doctors. A two-stage screening strategy has been validated and seems adequate for systematic use in health centres where technical and organizational resources for the effective management of depression are made available. These results can be viewed as primary care depressive disorders baseline indicators of prevalence, detection and treatment and, along with clinical useful instruments, the health system is more capacitated for the establishment of a national level large education campaign on depression such as proposed in the National Health Plan 2004-2010.

Quantitative analysis of cardiac lesions in chronic canine chagasic cardiomyopathy

Lesions observed in chronic chagasic cardiopathy frequently produce electrocardiographic alterations and affect cardiac function. Through a computerized morphometrical analysis we quantified the areas occupied by cardiac muscle, connective and adipose tissues in the right atrium of dogs experimentally infected with Trypanosoma cruzi. All of the infected dogs showed chronic myocarditis with variable reduction levels of cardiac muscle, fibrosis and adipose tissue replacement. In the atrial myocardium of dogs infected with Be78 and Be62 cardiac muscle represented 34 and 50%, fibrosis 28 and 32% and adipose tissue 38 and 18%, respectively. The fibrosis observed was both diffuse and focal and mostly intrafascicular, either partially or completely interrupting the path of muscle bundles. Such histological alterations probably contributed to the appearance of electrocardiographic disturbances verified in 10 out 11 dogs which are also common in human chronic chagasic cardiopathy. Fibrosis was the most important microscopic occurrence found since it produces rearrangements of collagen fibers in relation to myocardiocytes which causes changes in anatomical physiognomy and mechanical behavior of the myocardium. These abnormalities can contribute to the appearance of cardiac malfunction, arrythmias and congestive cardiac insufficiency as observed in two of the analyzed dogs. Strain Be78 caused destruction of atrial cardiac muscle higher than that induced by strain Be62.

Mode-Controlled Data-Flow Modeling of Real-Time Memory Controllers

Accepted in 13th IEEE Symposium on Embedded Systems for Real-Time Multimedia (ESTIMedia 2015), Amsterdam, Netherlands.

THE PROCESS OF Leishmania INFECTION - DISEASE AND NEW PERSPECTIVES OF PALEOPARASITOLOGY

Species of the genus Leishmania (Kinetoplastida, Trypanosomatidae) are causative agents of leishmaniasis, a complex disease with variable clinical spectrum and epidemiological diversity, constituting, in some countries, a serious public health problem. The origin and evolution of leishmaniasis has been under discussion regarding some clinical and parasitological aspects. After the introduction of paleoparasitology, molecular methods and immunodiagnostic techniques have been applied allowing the recovery of parasite remains, as well as the diagnosis of past infections in humans and other hosts. The dating of archaeological samples has allowed the parasitological analysis in time and space. This manuscript presents the state of the art of leishmaniasis and prospects related to paleoparasitology studies and their contribution to the evolutionary and phylogenetic clarification of parasites belonging to the genus Leishmania, and the leishmaniasis caused by them.

Development of a satellite based PM10 concentration product for urban areas

Dissertação para obtenção do Grau de Doutor em Engenharia do Ambiente

The early metallurgy in Southwestern Iberia: metals from the Chalcolithic Settlement of São Pedro (Redondo)

Archaeological excavations carried out in the archaeological site of São Pedro (Southern Portugal) revealed a Chalcolithic settlement occupied in different moments of the 3rd millennium BC. The material culture recovered includes different types of materials, such as ceramics, lithics and metals. The later comprises about 30 artefacts with different typologies such as tools (e.g. awls, chisels and a saw) and weapons (e.g. daggers and arrowheads) mostly belonging to the 2nd and 3rd quarter of the 3rd millennium BC. In the present work the collection of chalcolithic metallic artefacts recovered in São Pedro was characterized. Analytical studies involved micro energy dispersive X-ray fluorescence spectrometry (micro-EDXRF) to determine elemental composition, together with optical microscopy and Vickers microhardness testing for microstructural characterisation and hardness determination. Main results show copper with variable amounts of arsenic and very low content of other impurities, such as iron. Moreover, nearly half of the collection is composed by arsenical copper alloys (As > 2 wt.%) and an association was found between arsenic content and typology since the weapons group (mostly daggers) present higher values than tools (mostly awls). These results suggest some criteria in the selection of arsenic-rich copper ores or smelting products. Furthermore, after casting an artefact would have been hammered, annealed and sometimes, finished with a hammering operation. Additionally, microstructural variations in this collection reveal somewhat different operational conditions during casting, annealing and forging, as expected in such a primitive metallurgy. Moreover the operational sequence seems to be used to achieve the required shape to the object, rather than to intentionally make the alloy harder. Overall, this study suggests that Chalcolithic metallurgists might have a poor control of the addition of arsenic and/or were unable to use this element to increase the hardness of tools and weapons. Finally, the compositions, manufacturing processes and hardness were compared to those from neighbouring regions and different chronological periods.

Mapping numbers onto space in preschool children and adults

Tese de Doutoramento em Psicologia - Especialidade em Psicologia Experimental e Ciências Cognitivas