Ford Fairmont weight reduction baseline data. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Automotive applications of composite materials. Final report.

Corporate-Tech Planning, Inc., Waltham, Mass.

TESTANDO A TEORIA DA PARIDADE DE PODER DE COMPRA (PPC) NO PERÍODO DE 1995 A 2010

O objetivo deste trabalho é testar a teoria da Paridade de Poder de Compra em sua versão absoluta e relativa para o Brasil no período de 1995 a 2010, utilizando procedimentos da econometria visando estabelecer através de testes de hipóteses a validação ou rejeição da teoria da Paridade do Poder de Compra. Para a verificação serão utilizados os testes de Dickey-Fuller (DF), Dickey-Fuller Ampliado (ADF) e testes de Cointegração de Engle e Granger e Joahansen. Adotamos para o estudo os países EUA e Brasil, tendo em vista o fluxo de comércio entre estes países e sua importância na economia mundial. Através dos índices de preço IPA e PPI analisarse- á a validação da teoria da Paridade de Poder de Compra em sua versão relativa e absoluta, chegando-se a conclusão de aceitação de sua versão relativa e rejeição de sua versão absoluta.

Sviluppo e Applicazione di Metodologie per l'Ottimizzazione di Sistemi Energetici

La riduzione dei consumi di combustibili fossili e lo sviluppo di tecnologie per il risparmio energetico sono una questione di centrale importanza sia per l’industria che per la ricerca, a causa dei drastici effetti che le emissioni di inquinanti antropogenici stanno avendo sull’ambiente. Mentre un crescente numero di normative e regolamenti vengono emessi per far fronte a questi problemi, la necessità di sviluppare tecnologie a basse emissioni sta guidando la ricerca in numerosi settori industriali. Nonostante la realizzazione di fonti energetiche rinnovabili sia vista come la soluzione più promettente nel lungo periodo, un’efficace e completa integrazione di tali tecnologie risulta ad oggi impraticabile, a causa sia di vincoli tecnici che della vastità della quota di energia prodotta, attualmente soddisfatta da fonti fossili, che le tecnologie alternative dovrebbero andare a coprire. L’ottimizzazione della produzione e della gestione energetica d’altra parte, associata allo sviluppo di tecnologie per la riduzione dei consumi energetici, rappresenta una soluzione adeguata al problema, che può al contempo essere integrata all’interno di orizzonti temporali più brevi. L’obiettivo della presente tesi è quello di investigare, sviluppare ed applicare un insieme di strumenti numerici per ottimizzare la progettazione e la gestione di processi energetici che possa essere usato per ottenere una riduzione dei consumi di combustibile ed un’ottimizzazione dell’efficienza energetica. La metodologia sviluppata si appoggia su un approccio basato sulla modellazione numerica dei sistemi, che sfrutta le capacità predittive, derivanti da una rappresentazione matematica dei processi, per sviluppare delle strategie di ottimizzazione degli stessi, a fronte di condizioni di impiego realistiche. Nello sviluppo di queste procedure, particolare enfasi viene data alla necessità di derivare delle corrette strategie di gestione, che tengano conto delle dinamiche degli impianti analizzati, per poter ottenere le migliori prestazioni durante l’effettiva fase operativa. Durante lo sviluppo della tesi il problema dell’ottimizzazione energetica è stato affrontato in riferimento a tre diverse applicazioni tecnologiche. Nella prima di queste è stato considerato un impianto multi-fonte per la soddisfazione della domanda energetica di un edificio ad uso commerciale. Poiché tale sistema utilizza una serie di molteplici tecnologie per la produzione dell’energia termica ed elettrica richiesta dalle utenze, è necessario identificare la corretta strategia di ripartizione dei carichi, in grado di garantire la massima efficienza energetica dell’impianto. Basandosi su un modello semplificato dell’impianto, il problema è stato risolto applicando un algoritmo di Programmazione Dinamica deterministico, e i risultati ottenuti sono stati comparati con quelli derivanti dall’adozione di una più semplice strategia a regole, provando in tal modo i vantaggi connessi all’adozione di una strategia di controllo ottimale. Nella seconda applicazione è stata investigata la progettazione di una soluzione ibrida per il recupero energetico da uno scavatore idraulico. Poiché diversi layout tecnologici per implementare questa soluzione possono essere concepiti e l’introduzione di componenti aggiuntivi necessita di un corretto dimensionamento, è necessario lo sviluppo di una metodologia che permetta di valutare le massime prestazioni ottenibili da ognuna di tali soluzioni alternative. Il confronto fra i diversi layout è stato perciò condotto sulla base delle prestazioni energetiche del macchinario durante un ciclo di scavo standardizzato, stimate grazie all’ausilio di un dettagliato modello dell’impianto. Poiché l’aggiunta di dispositivi per il recupero energetico introduce gradi di libertà addizionali nel sistema, è stato inoltre necessario determinare la strategia di controllo ottimale dei medesimi, al fine di poter valutare le massime prestazioni ottenibili da ciascun layout. Tale problema è stato di nuovo risolto grazie all’ausilio di un algoritmo di Programmazione Dinamica, che sfrutta un modello semplificato del sistema, ideato per lo scopo. Una volta che le prestazioni ottimali per ogni soluzione progettuale sono state determinate, è stato possibile effettuare un equo confronto fra le diverse alternative. Nella terza ed ultima applicazione è stato analizzato un impianto a ciclo Rankine organico (ORC) per il recupero di cascami termici dai gas di scarico di autovetture. Nonostante gli impianti ORC siano potenzialmente in grado di produrre rilevanti incrementi nel risparmio di combustibile di un veicolo, è necessario per il loro corretto funzionamento lo sviluppo di complesse strategie di controllo, che siano in grado di far fronte alla variabilità della fonte di calore per il processo; inoltre, contemporaneamente alla massimizzazione dei risparmi di combustibile, il sistema deve essere mantenuto in condizioni di funzionamento sicure. Per far fronte al problema, un robusto ed efficace modello dell’impianto è stato realizzato, basandosi sulla Moving Boundary Methodology, per la simulazione delle dinamiche di cambio di fase del fluido organico e la stima delle prestazioni dell’impianto. Tale modello è stato in seguito utilizzato per progettare un controllore predittivo (MPC) in grado di stimare i parametri di controllo ottimali per la gestione del sistema durante il funzionamento transitorio. Per la soluzione del corrispondente problema di ottimizzazione dinamica non lineare, un algoritmo basato sulla Particle Swarm Optimization è stato sviluppato. I risultati ottenuti con l’adozione di tale controllore sono stati confrontati con quelli ottenibili da un classico controllore proporzionale integrale (PI), mostrando nuovamente i vantaggi, da un punto di vista energetico, derivanti dall’adozione di una strategia di controllo ottima.

A Look Back To Look Forward: New Patterns In The Supply/Demand Equation In The Lodging Industry

In his dialogue entitled - A Look Back to Look Forward: New Patterns In The Supply/Demand Equation In The Lodging Industry - by Albert J. Gomes, Senior Principal, Pannell Kerr Forster, Washington, D.C. What the author intends for you to know is the following: “Factors which influence the lodging industry in the United States are changing that industry as far as where hotels are being located, what clientele is being served, and what services are being provided at different facilities. The author charts these changes and makes predictions for the future.” Gomes initially alludes to the evolution of transportation – the human, animal, mechanical progression - and how those changes, in the last 100 years or so, have had a significant impact on the hotel industry. “A look back to look forward treats the past as prologue. American hoteliers are in for some startling changes in their business,” Gomes says. “The man who said that the three most important determinants for the success of a hotel were “location, location, location” did a lot of good only in the short run.” Gomes wants to make you aware of the existence of what he calls, “locational obsolescence.” “Locational obsolescence is a fact of life, and at least in the United States bears a direct correlation to evolutionary changes in transportation technology,” he says. “…the primary business of the hospitality industry is to serve travelers or people who are being transported,” Gomes expands the point. Tied to the transportation element, the author also points out an interesting distinction between hotels and motels. In addressing, “…what clientele is being served, and what services are being provided at different facilities,” Gomes suggests that the transportation factor influences these constituents as well. Also coupled with this discussion are oil prices and shifts in transportation habits, with reference to airline travel being an ever increasing method of travel; capturing much of the inter-city travel market. Gomes refers to airline deregulation as an impetus. The point being, it’s a fluid market rather than a static one, and [successful] hospitality properties need to be cognizant of market dynamics and be able to adjust to the variables in their marketplace. Gomes provides many facts and figures to bolster his assertions. Interestingly and perceptively, at the time of this writing, Gomes alludes to America’s deteriorating road and bridge network. As of right now, in 2009, this is a major issue. Gomes rounds out this study by comparing European hospitality trends to those in the U.S.

Numerical Analysis on a Dual-Loop Waste Heat Recovery System Coupled with an ORC for Vehicle Applications

The internal combustion (IC) engines exploits only about 30% of the chemical energy ejected through combustion, whereas the remaining part is rejected by means of cooling system and exhausted gas. Nowadays, a major global concern is finding sustainable solutions for better fuel economy which in turn results in a decrease of carbon dioxide (CO2) emissions. The Waste Heat Recovery (WHR) is one of the most promising techniques to increase the overall efficiency of a vehicle system, allowing the recovery of the heat rejected by the exhaust and cooling systems. In this context, Organic Rankine Cycles (ORCs) are widely recognized as a potential technology to exploit the heat rejected by engines to produce electricity. The aim of the present paper is to investigate a WHR system, designed to collect both coolant and exhausted gas heats, coupled with an ORC cycle for vehicle applications. In particular, a coolant heat exchanger (CLT) allows the heat exchange between the water coolant and the ORC working fluid, whereas the exhausted gas heat is recovered by using a secondary circuit with diathermic oil. By using an in-house numerical model, a wide range of working conditions and ORC design parameters are investigated. In particular, the analyses are focused on the regenerator location inside the ORC circuits. Five organic fluids, working in both subcritical and supercritical conditions, have been selected in order to detect the most suitable configuration in terms of energy and exergy efficiencies.

Comparison Between Leaded and Nonleaded Gasoline as Used in Iowa State Highway Commission Vehicles, HR-1002, 1972

The overall objective of this experimental program was to obtain quantitative comparisons between leaded and nonleaded gasolines as used in a variety of Iowa State Highway Connnission vehicles. These quantitative comparisons were to be made in terms of exhaust emissions, maintenance costs and fuel economy.

COMPARATIVE ANALYSIS OF EFFICIENCY AND OPERATING CHARACTERISTICS OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING

The thesis "COMPARATIVE ANALYSIS OF EFFICIENCY AND OPERATING CHARACTERISTICS OF AUTOMOTIVE POWERTRAIN ARCHITECTURES THROUGH CHASSIS DYNAMOMETER TESTING" was completed through a collaborative partnership between Michigan Technological University and Argonne National Laboratory under a contractual agreement titled "Advanced Vehicle Characterization at Argonne National Laboratory". The goal of this project was to investigate, understand and document the performance and operational strategy of several modern passenger vehicles of various architectures. The vehicles were chosen to represent several popular engine and transmission architectures and were instrumented to allow for data collection to facilitate comparative analysis. In order to ensure repeatability and reliability during testing, each vehicle was tested over a series of identical drive cycles in a controlled environment utilizing a vehicle chassis dynamometer. Where possible, instrumentation was preserved between vehicles to ensure robust data collection. The efficiency and fuel economy performance of the vehicles was studied. In addition, the powertrain utilization strategies, significant energy loss sources, tailpipe emissions, combustion characteristics, and cold start behavior were also explored in detail. It was concluded that each vehicle realizes different strengths and suffers from different limitations in the course of their attempts to maximize efficiency and fuel economy. In addition, it was observed that each vehicle regardless of architecture exhibits significant energy losses and difficulties in cold start operation that can be further improved with advancing technology. It is clear that advanced engine technologies and driveline technologies are complimentary aspects of vehicle design that must be utilized together for best efficiency improvements. Finally, it was concluded that advanced technology vehicles do not come without associated cost; the complexity of the powertrains and lifecycle costs must be considered to understand the full impact of advanced vehicle technology.

The rise and fall in the price of food, fuel and manufactured goods : interdependency between prices and technology determining comparative advantages and development paths

Green innovation, which enables us to extract energy from food crops, caused a food shortage in 2008. Countries suffering severe damage started to reconsider their agricultural policy with the aim of becoming more autonomous. The food price hike of the time looks like a reversal of the celebrated Singer-Prebisch thesis proposed in the 1950s. This paper examines the consequences of this trend on the comparative advantages and development strategies of developing countries. For that purpose, first, trends and short-run fluctuations in the prices of fuel and bio-energy crops are investigated. It is shown that the price series of fuels and the crops are synchronized only after the fuel extracting technology came into effect. Second, the reversal of the Singer-Prebisch thesis is underpinned by the generic form of an endogenous growth model developed by Rebelo (1991). It is shown that as an economy grows, appreciation of the non-reproducible, such as mineral resources and raw labor, over the reproducible, such as capital goods, is the norm rather than an anomaly. Third, the consequences of the food price hike and underlying capital accumulation on the development strategies of labor-abundant and low-income countries are explored. It is concluded that the impact of the food price hikes on the alteration of a development strategy is only incremental, without reinforcement from raw-labor-saving innovation. A case study of inventions by JUKI Corporation, a world-leader in the sewing machine market exemplifies the fact that, of all the major inventions the company have made, raw-labor-saving inventions have not dominated, although JUKI's machines are sold to one of the most raw-labor-intensive industries.

Seeing the forest for the fuel

We demonstrate a new approach to understanding the role of fuelwood in the rural household economy by applying insights from travel cost modeling to author-compiled household survey data and meso-scale environmental statistics from Ruteng Park in Flores, Indonesia. We characterize Manggarai farming households' fuelwood collection trips as inputs into household production of the utility yielding service of cooking and heating. The number of trips taken by households depends on the shadow price of fuelwood collection or the travel cost, which is endogenous. Econometric analyses using truncated negative binomial regression models and correcting for endogeneity show that the Manggarai are 'economically rational' about fuelwood collection and access to the forests for fuelwood makes substantial contributions to household welfare. Increasing cost of forest access, wealth, use of alternative fuels, ownership of kerosene stoves, trees on farm, park staff activity, primary schools and roads, and overall development could all reduce dependence on collecting fuelwood from forests. © 2004 Cambridge University Press.

Science for sale in a free market economy: But at what price? ABA and the treatment of autism in Europe.

Educating the public accurately about Applied Behavior Analysis (ABA) is an important undertaking, not least because misconceptions and myths about ABA abound. In this paper we argue that, unfortunately, the efforts of many dedicated professionals and parents to disseminate accurate information about the benefits of ABA for children diagnosed with autism spectrum disorder (ASD) are damaged by a few behavior analysts whose focus seems to be more on monetary gains than social responsibility. We cite examples of the resulting harm to the public image of behavior analysis from a number of European countries. We conclude by calling upon fellow scientists to unite in their opposition to unscrupulous abuses of free market forces for short-term monetary gains that damage the dissemination of the science of behavior analysis and thereby ultimately disadvantage those who should benefit primarily from our science, i.e., some of the most vulnerable citizens of society.

ITEM : An Integrated Transport Economy Model - Price Elasticities of Freight Transport Demand in Canada : Three Canadian Markets and Four Commodities.

Rapport de recherche

Political economy of low sulfurization and air pollution control policy in Japan : SOx emission reduction by fuel conversion

In the early stages of the development of Japan’s environmental policy, sulfur oxide (SOx) emissions, which seriously damage health, was the most important air pollution problem. In the second half of the 1960s and the first half of the 1970s, the measures against SOx emissions progressed quickly, and these emissions were reduced drastically. The most important factor of the reduction was the conversion to a low-sulfur fuel for large-scale fuel users, such as the electric power industry. However, industries started conversion to low-sulfur fuel not due to environmental concerns, but simply to reduce costs. Furthermore, the interaction among the various interests of the electric power industry, oil refineries, the central government, local governments, and citizens over the energy and environmental policies led to the measures against SOx emissions by fuel conversion.