Molecular epidemiology and extended-spectrum β-lactamases production of Klebsiella pneumoniae isolated from three dairy herds

The objectives of this study were to isolate Klebsiella pneumoniae from different sources in three dairy cattle herds, to use the pulsed-field gel electrophoresis (PFGE) to measure genotypic similarities between isolates within a dairy herd, to verify the production of extended-spectrum β-lactamases (ESBLs) by the double-disk synergy test (DDST), and to use the PCR to detect the main ESBLs subgroups genes. Three dairy farms were selected based on previous mastitis outbreaks caused by K. pneumoniae. Milk samples were collected from lactating cows and from the bulk tank. Swabs were performed in different locations, including milking parlors, waiting room, soil, animal's hind limbs and rectum. K. pneumoniae was isolated from 27 cases of intramammary infections (IMI) and from 41 swabs. For farm A isolates from IMI and bulk tank were considered of the same PGFE subtype. One isolate from a bulk tank, three from IMI cases and four from environmental samples were positive in the DDST test. All eight DDST positive isolates harbored the bla shv gene, one harbored the bla tem gene, and three harbored the bla ctx-m gene, including the bulk tank isolate. Our study confirms that ESBL producing bacteria is present in different locations in dairy farms, and may be responsible for IMI. The detection of ESBLs on dairy herds could be a major concern for both public and animal health.

Estimation of aircraft aerodynamic derivatives using Extended Kalman Filter

Design of flight control laws, verification of performance predictions, and the implementation of flight simulations are tasks that require a mathematical model of the aircraft dynamics. The dynamical models are characterized by coefficients (aerodynamic derivatives) whose values must be determined from flight tests. This work outlines the use of the Extended Kalman Filter (EKF) in obtaining the aerodynamic derivatives of an aircraft. The EKF shows several advantages over the more traditional least-square method (LS). Among these the most important are: there are no restrictions on linearity or in the form which the parameters appears in the mathematical model describing the system, and it is not required that these parameters be time invariant. The EKF uses the statistical properties of the process and the observation noise, to produce estimates based on the mean square error of the estimates themselves. Differently, the LS minimizes a cost function based on the plant output behavior. Results for the estimation of some longitudinal aerodynamic derivatives from simulated data are presented.

Assessment of purchasing maturity in spare parts supply chain

To describe the change of purchasing moving from administrative to strategic function academics have put forward maturity models which help practitioners to compare their purchasing activities to industry top performers and best practices. However, none of the models aim to distinguish the purchasing maturity from the after-sales point of view, even though after-sales activities are acknowledged as a relevant source of revenue, profit and competitive advantage in most manufacturing firms. The maturity of purchasing and supply management practices have a large impact to the overall performance of the spare parts supply chain and ultimately to the value creation and relationship building for the end customer. The research was done as a case study for a European after-sales organization which is part of a globally operating industrial firm specialized in heavy machinery. The study mapped the current state of the purchasing practices in the case organization and also distinguished the relevant areas for future development. The study was based on the purchasing maturity model developed by Schiele (2007) and investigated also how applicable is the maturity model in the spare parts supply chain context. Data for the assessment was gathered using five expert interviews inside the case organization and other parties involved in the company’s spare parts supply chain. Inventory management dimension was added to the original maturity model in order to better capture the important areas in a spare parts supply chain. The added five questions were deduced from the spare parts management literature and verified as relevant areas by the case organization’s personnel. Results indicate that largest need for development in the case organization are: better collaboration between sourcing and operative procurement functions, use of installed base information in the spare parts management, training plan development for new buyers, assessment of aligned KPI’s between the supply chain parties and better defining the role of after-sales sourcing. The purchasing maturity model used in this research worked well in H&R Leading, Controlling and Inventory Management dimensions. The assessment was more difficult to conduct in the Supplier related processes, Process integration and Organizational structure –dimensions, mainly because the assessment in these sections would for some parts require more company-wide assessment. Results indicate also that the purchasing maturity model developed by Schiele (2007) captures the relevant areas in the spare parts supply as well.

Evolver: The Evolution of The Extended EPrints Ecosystem

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

A Business continuity management maturity model : the search for an ISO 22301 Compliant BCM Maturity model

BCM (business continuity Management) is a holistic management process aiming at ensuring business continuity and building organizational resilience. Maturity models offer organizations a tool for evaluating their current maturity in a certain process. In the recent years BCM has been subject to international ISO standardization, while the interest of organizations to bechmark their state of BCM agains standards and the use of maturity models for these asessments has increased. However, although new standards have been introduced, very little attention has been paid to reviewing the existing BCM maturity models in research - especially in the light of the new ISO 22301 standard for BCM. In this thesis the existing BCM maturily models are carefully evaluated to determine whetherthey could be improved. In order to accomplish this, the compliance of the existing models to the ISO 22301 standard is measured and a framework for assessing a maturitymodel´s quality is defined. After carefully evaluating the existing frameworks for maturity model development and evaluation, an approach suggested by Becker et al. (2009) was chosen as the basis for the research. An additionto the procedural model a set of seven research guidelines proposed by the same authors was applied, drawing on the design-science research guidelines as suggested by Hevner et al. (2004). Furthermore, the existing models´ form and function was evaluated to address their usability. Based on the evaluation of the existing BCM maturity models, the existing models were found to have shortcomings in each dimension of the evaluation. Utilizing the best of the existing models, a draft version for an enhanced model was developed. This draft model was then iteratively developed by conducting six semi-structured interviews with BCM professionals in finland with the aim of validating and improving it. As a Result, a final version of the enhanced BCM maturity model was developed, conforming to the seven key clauses in the ISO 22301 standard and the maturity model development guidelines suggested by Becker et al. (2009).

Extended hydrogen photoproduction by nitrogen-fixing cyanobacteria

Cyanobacteria are the only prokaryotic organisms performing oxygenic photosynthesis. They comprise a diverse and versatile group of organisms in aquatic and terrestrial environments. Increasing genomic and proteomic data launches wide possibilities for their employment in various biotechnical applications. For example, cyanobacteria can use solar energy to produce H2. There are three different enzymes that are directly involved in cyanobacterial H2 metabolism: nitrogenase (nif) which produces hydrogen as a byproduct in nitrogen fixation; bidirectional hydrogenase (hox) which functions both in uptake and in production of H2; and uptake hydrogenase (hup) which recycles the H2 produced by nitrogenase back for the utilization of the cell. Cyanobacterial strains from University of Helsinki Cyanobacteria Collection (UHCC), isolated from the Baltic Sea and Finnish lakes were screened for efficient H2 producers. Screening about 400 strains revealed several promising candidates producing similar amounts of H2 (during light) as the ΔhupL mutant of Anabaena PCC 7120, which is specifically engineered to produce higher amounts of H2 by the interruption of uptake hydrogenase. The optimal environmental conditions for H2 photoproduction were significantly different between various cyanobacterial strains. All suitable strains revealed during screening were N2-fixing, filamentous and heterocystous. The top ten H2 producers were characterized for the presence and activity of the enzymes involved in H2 metabolism. They all possess the genes encoding the conventional nitrogenase (nifHDK1). However, the high H2 photoproduction rates of these strains were shown not to be directly associated with the maximum capacities of highly active nitrogenase or bidirectional hydrogenase. Most of the good producers possessed a highly active uptake hydrogenase, which has been considered as an obstacle for efficient H2 production. Among the newly revealed best H2 producing strains, Calothrix 336/3 was chosen for further, detailed characterization. Comparative analysis of the structure of the nif and hup operons encoding the nitrogenase and uptake hydrogenase enzymes respectively showed minor differences between Calothrix 336/3 and other N2-fixing model cyanobacteria. Calothrix 336/3 is a filamentous, N2-fixing cyanobacterium with ellipsoidal, terminal heterocysts. A common feature of Calothrix 336/3 is that the cells readily adhere to substrates. To make use of this feature, and to additionally improve H2 photoproduction capacity of the Calothrix 336/3 strain, an immobilization technique was applied. The effects of immobilization within thin alginate films were evaluated by examining the photoproduction of H2 of immobilized Calothrix 336/3 in comparison to model strains, the Anabaena PCC 7120 and its ΔhupL mutant. In order to achieve optimal H2 photoproduction, cells were kept under nitrogen starved conditions (Ar atmosphere) to ensure the selective function of nitrogenase in reducing protons to H2. For extended H2 photoproduction, cells require CO2 for maintenance of photosynthetic activity and recovery cycles to fix N2. Application of regular H2 production and recovery cycles, Ar or air atmospheres respectively, resulted in prolongation of H2 photoproduction in both Calothrix 336/3 and the ΔhupL mutant of Anabaena PCC 7120. However, recovery cycles, consisting of air supplemented with CO2, induced a strong C/N unbalance in the ΔhupL mutant leading to a decrease in photosynthetic activity, although total H2 yield was still higher compared to the wild-type strain. My findings provide information about the diversity of cyanobacterial H2 capacities and mechanisms and provide knowledge of the possibilities of further enhancing cyanobacterial H2 production.

Genesis and Evolution of Brittle Structures In Southwestern Finland and Western South Africa. Insights into Fault Reactivation, Fluid Flow and Structural Maturity in Precambrian Cratons

The bedrock of old crystalline cratons is characteristically saturated with brittle structures formed during successive superimposed episodes of deformation and under varying stress regimes. As a result, the crust effectively deforms through the reactivation of pre-existing structures rather than by through the activation, or generation, of new ones, and is said to be in a state of 'structural maturity'. By combining data from Olkiluoto Island, southwestern Finland, which has been investigated as the potential site of a deep geological repository for high-level nuclear waste, with observations from southern Sweden, it can be concluded that the southern part of the Svecofennian shield had already attained structural maturity during the Mesoproterozoic era. This indicates that the phase of activation of the crust, i.e. the time interval during which new fractures were generated, was brief in comparison to the subsequent reactivation phase. Structural maturity of the bedrock was also attained relatively rapidly in Namaqualand, western South Africa, after the formation of first brittle structures during Neoproterozoic time. Subsequent brittle deformation in Namaqualand was controlled by the reactivation of pre-existing strike-slip faults.In such settings, seismic events are likely to occur through reactivation of pre-existing zones that are favourably oriented with respect to prevailing stresses. In Namaqualand, this is shown for present day seismicity by slip tendency analysis, and at Olkiluoto, for a Neoproterozoic earthquake reactivating a Mesoproterozoic fault. By combining detailed field observations with the results of paleostress inversions and relative and absolute time constraints, seven distinctm superimposed paleostress regimes have been recognized in the Olkiluoto region. From oldest to youngest these are: (1) NW-SE to NNW-SSE transpression, which prevailed soon after 1.75 Ga, when the crust had sufficiently cooled down to allow brittle deformation to occur. During this phase conjugate NNW-SSE and NE-SW striking strike-slip faults were active simultaneous with reactivation of SE-dipping low-angle shear zones and foliation planes. This was followed by (2) N-S to NE-SW transpression, which caused partial reactivation of structures formed in the first event; (3) NW-SE extension during the Gothian orogeny and at the time of rapakivi magmatism and intrusion of diabase dikes; (4) NE-SW transtension that occurred between 1.60 and 1.30 Ga and which also formed the NW-SE-trending Satakunta graben located some 20 km north of Olkiluoto. Greisen-type veins also formed during this phase. (5) NE-SW compression that postdates both the formation of the 1.56 Ga rapakivi granites and 1.27 Ga olivine diabases of the region; (6) E-W transpression during the early stages of the Mesoproterozoic Sveconorwegian orogeny and which also predated (7) almost coaxial E-W extension attributed to the collapse of the Sveconorwegian orogeny. The kinematic analysis of fracture systems in crystalline bedrock also provides a robust framework for evaluating fluid-rock interaction in the brittle regime; this is essential in assessment of bedrock integrity for numerous geo-engineering applications, including groundwater management, transient or permanent CO2 storage and site investigations for permanent waste disposal. Investigations at Olkiluoto revealed that fluid flow along fractures is coupled with low normal tractions due to in-situ stresses and thus deviates from the generally accepted critically stressed fracture concept, where fluid flow is concentrated on fractures on the verge of failure. The difference is linked to the shallow conditions of Olkiluoto - due to the low differential stresses inherent at shallow depths, fracture activation and fluid flow is controlled by dilation due to low normal tractions. At deeper settings, however, fluid flow is controlled by fracture criticality caused by large differential stress, which drives shear deformation instead of dilation.

Initialization of Continuous Nonlinear Models Using Extended Kalman Filter

The two main objectives of Bayesian inference are to estimate parameters and states. In this thesis, we are interested in how this can be done in the framework of state-space models when there is a complete or partial lack of knowledge of the initial state of a continuous nonlinear dynamical system. In literature, similar problems have been referred to as diffuse initialization problems. This is achieved first by extending the previously developed diffuse initialization Kalman filtering techniques for discrete systems to continuous systems. The second objective is to estimate parameters using MCMC methods with a likelihood function obtained from the diffuse filtering. These methods are tried on the data collected from the 1995 Ebola outbreak in Kikwit, DRC in order to estimate the parameters of the system.

Characterization of maturity and quality of Brazilian apirenic grapes in the São Francisco river Valley

The objective of this study was to characterize and correlate maturity and quality of the first varieties of Brazilian seedless grapes 'BRS Clara', 'BRS Linda', 'BRS Morena', and 'Advanced Selection 8' compared with the American variety 'Crimson Seedless' in compliance with the Brazilian Normative/2002 and export standards Advanced Selection 8' is dark reddish, has large clusters, and is a very large ellipsoid berry; 'BRS Morena' is black with medium sized clusters and large berry shaped as ellipsoid to globoid; 'BRS Linda' is light green and has large sized clusters; 'Crimson' is pink and has small clusters with berries varying from medium to large sizes and ellipsoid shaped; and 'BRS Clara' is green yellowish has medium sized clusters and small berry of elongated ellipsoid shape. All varieties evaluated meet the standard for domestic market established as berry size minimum diameter 12 mm. 'BRS Clara' does not meet the export requirements of diameter. Berries of the red grapes 'BRS Morena' and 'Crimson Seedless' are firmer. The pH, titratable acidity, and soluble solids meet the official standards. Larger clusters are less acidic and present higher soluble solids/titratable acidity ratios implying that they are the sweetest type when ripe.

Chemical and physical characterization of mume fruit collected from different locations and at different maturity stages in São Paulo State

Prunus mume is widely studied due to its health benefits regarding increase of blood fluidity and consequent improvement of the cardiovascular system and the prevention or even the fight against different types of cancer. However, in Brazil this culture is found only among oriental descendants. The present study aimed to characterize mume fruit collected from three different locations in the State of São Paulo regarding general aspects such as pH, total titratable acidity (TTA), total soluble solids (TTS), pectin content and yield of pulp and chemical characteristics: total phenolic compounds (TPC) and antioxidant capacity. Mume fruit were collected unripe and analyzed until maturation about 88 days after flowering. Fruit collected in Botucatu came from a commercial mume fruit producer and had average weight of 16.9 g, while in fruit from other locations weight varied from 5.7-6.9 g. TSS ranged from 9.5 to 10.0 Brix, total solids was 10.2-12.2% and pH showed values between 2.5 and 2.7 for all locations. TTA expressed in citric acid decreased from 4.0-5.7 g (100g- 1) at unripe stage to 2.0-3.8 g (100g- 1) in mature-stage fruit. Pectin content decreased from 11.2 to 10.8% during fruit maturation, TPC content was 147-226 mg catechin (g- 1) on a dry matter basis and the antioxidant capacity was 96-169 µMol Trolox (g- 1) on a dry matter basis or 21-34 µMol Trolox (g- 1) on a wet matter basis.

Physiological maturity of seeds and colorimetry of fruits of Jatropha curcas L.

The objective was to relate the coloration of fruits of Jatropha curcas L during the maturation process with morphometric (fruits and seeds) and germinative characteristics (seeds). Fruits were collected at various maturation stages from mast trees located in Eldorado/MS, and six maturation stages were visually classified based on fruit's epicarp color. Epicarp digital colorimetry was used to characterize maturation stages in addition to morphometric variables of length and width of fruits and seeds, as well their water content. For determining the physiological potential it was used germination test, emergence velocity index and first count of germination. Results indicated that seeds of J. curcas should be harvested when fruit epicarp shows a reading equal or smaller than 82, 70 or 65 nm of red, green or blue scales from a digital color analyzer. Seeds of fruits with that colorimetry can be harvested in virtue of the maxim acumululation of dry mass, water content below 38,5% and higher physiological potential.

Physiological maturity of fruits and seeds of Poincianella pyramidalis (Tul.) L.P. Queiroz

The Leguminosae family is one of the most representative botanical families of the Caatinga, with 80 endemic species, highlighting the catingueira (Poincianella pyramidalis). The objective of this research work was to study the maturation process of P. pyramidalis seeds based on the physiological maturity. Five harvest of fruits and seeds were carried out, with 15 days interval each, in a period from July to September 2010. The harvests began 75 days after anthesis (d.a.a.) and lasted until 135 d.a.a. Fruits and seeds were subjected to the following assessments: size, moisture content, and dry mass of fruits and seeds; and germination and vigor of seeds (first count of germination, germination speed index, length and dry mass of seedling). Under the environmental conditions of municipality of Soledade, State of Paraiba, Northeast Brazil, the point of physiological maturity of P. pyramidalis seeds occurs at 125 d.a.a., when the maximum accumulation of dry mass is 1.993 g and moisture content is 21%. The ideal point of harvest is between 130 d.a.a and 135 d.a.a., before natural dehiscence, when the moisture content of seeds is between 13.0% and 5.0%.

Physiological maturity of eggplant seeds

Determination of seed physiological maturity and ideal moment for harvesting fruits to extract their seeds are important aspects to produce seeds with high quality. To identify the best period for harvesting eggplant fruits, associated with ideal resting period of the fruit for extracting seeds, an eggplant production field was installed in municipality of Ijaci, in the State of Minas Gerais, Southwestern Brazil. The fruits were harvested at periods of 49, 56, 63, 70, and 77 days after pollination (DAP). The seeds of fruits harvested in each period were manually extracted immediately after harvest or after a post-harvest resting period of seven days, under a shed. The physiological quality of seeds was assessed by tests of: germination percentage; germination and emergence speed indexes; and electrical conductivity; which were carried out in the Central Seed Laboratory, Federal University of Lavras. Electrophoretic analyses of isoenzymes: catalase (CAT); esterase (EST); superoxide dismutase (SOD); and peroxidase (PO), were also therein performed. Results of germination and vigor of seeds have showed that the best period for harvesting the fruit is around 70 DAP; and that seeds should be extracted immediately after harvest. Electrophoretic analysis of enzymes has showed immaturity for eggplant seeds, harvested after 49 DAP.

The connection between career education and career maturity /

The value of career education is measured by the extent to which it enhances students' decision making skills regarding career planning. This is referred to as "career maturity". The purpose of this study was to examine what connections could be found between career education and career maturity within one career planning course. A senior level career planning class was studied in depth for one semester and five senior students participated in the study. The five students were interviewed three times during the semester to determine whether, and to what extent, students feel more prepared personally to make decisions as a result of a guided course of instruction. The current trend in education shows an increased emphasis on career education. The government mandates career education, students are in need of career planning courses, and parents want students to learn how to effectively make decisions concerning their future. With this increased emphasis comes the need to evaluate current career education programs which is why this study is significant and useful. The central findings were as follows: first, as a result of taking a career planning course students did increase their career maturity. Second, current career education planning curriculum was similar to the proposed course of study for career planning which comes into effect in September 1999. Current curriculum does help to prepare students to make informed educational and career decisions, a chief aim of the proposed curriculum. Knowing that this outcome is currently achieved will help when the course is being organized to fit the new curriculum.

The effect of pH and ethanol on the astringent sub-qualities of red wine, and the implications for optimum grape maturity /

The first objective of this study was to identify appropriate sensory descriptors to assess the astringent sub-qualities of red wine. The influence of pH and ethanol on the sensation of astringency in red wine was evaluated, using a de-alcoholized red wine. A portion of the wine was adjusted to the pH values of 3.2, 3.4, 3.6 and 3.8, and another portion was adjusted to ethanol concentrations of 0%, 6%, 12%, and 15%. In addition, the pH 3.4 and 3.6 treatments were adjusted to an ethanol concentration of 12% and 15% all wines were then assessed sensorially and seventeen terms were identified, through panel discussion, to describe the mouth-feel and taste qualities: velvet, aggressive, silk/satin, dry, fleshy, unripe, pucker viscosity, abrasive, heat, chewy, acidity, grippy/adhesive, bitter, balance, overall astringency, and mouth-coat. Descriptive analysis profiling techniques were used to train the panel and measure the intensity of these attributes. It was found that decreasing pH values (averaged across all ethanol concentrations) showed an increase in the overall astringency of the wine. The combined treatments of ethanol and pH, real wine parameters (pH 3.4 and 3.6; 12% and 15% ethanol) did not have an effect on the perception of the astringent sub-qualities of the wine. A time intensity study was also included using the pH and ethanol adjusted wines, which showed that as the ethanol level of the wines increased so did the time to maximum intensity. The second objective was to identify appropriate sensory descriptors to evaluate the influence of grape maturity and maceration technique (grape skin contact) on the astringency sub-qualities of red vinifera wines from Niagara. The grapes were harvested across two dates, representing an early harvest and a late harvest. A portion of the Cabernet Sauvignon grapes wine was divided into three maceration treatments of oneweek maceration, standard two-week maceration, three-week maceration, and MCM. Another portion of both the early and late harvest Cabernet Sauvignon grapes were chaptalized to yield a final ethanol concentration of 14.5%. The wines were assessed sensorially and thirteen terms were identified, through panel discussion, to describe the mouth-feel and taste qualities: carbon dioxide, pucker, acidity, silk/chamois, dusty/chalky/powdery, sandpaper, numbing, grippy/adhesive, dry, mouthcoat, bitter, balance and, overall astringency. Descriptive analysis techniques were used to train the panel and measure the intensity of these attributes. The data revealed few significant differences in the mouth-feel of the wines with respect to maturity; which included differences in overall astringency and balance. There were varietal differences between Cabernet Sauvignon, Cabernet Franc, and Pinot Noir and differences for Cabernet Sauvignon wines due to the length and manner of maceration and as a result of chaptalization. Statistical analysis revealed a more complex mouth-feel for the Pinot Noir wines; and an increase in the intensity of the astringent sub-qualities as a result of the addition of sugar to the wines. These findings have implications for how processing decisions, such as optimum grape maturity and vinification methods may affect red wine quality.