Isotermes d'adsorpció d'alquilfenols en sediments i altres materials

Projecte de recerca elaborat a partir d’una estada al Center of Applied Geosciences de la Eberhard Karls Universität entre abril i octubre del 2007. Durant l'estada es va adquirir la tècnica per a la realització d'isotermes d'adsorció aplicant-la posteriorment a l'estudi de dos compostos del grup dels alquilfenols (nonilfenol i octilfenol). Aquestes isotermes es van realitzar en diversos sediments provinents de la conca hidrogràfica del riu Ebre i en altres dos materials (lignit i torba), tots ells amb diferent contingut de carboni orgànic total (que varia entre 0,4% per a un dels sediments i 47,8% per a la torba), per a estudiar la influència d'aquest paràmetre en els comportament del nonilfenol pel que fa a l'adsorció. Per altra banda es va afegir l’octilfenol a l’estudi, tant per separat com en combinació amb el nonilfenol, i es va extendre la isoterma per al nonilfenol a concentracions més baixes, properes a les concentracions que es poden trobar d’aquest compost al medi. Aquestes últimes isotermes es van realitzar utilitzant en tots els casos un dels sediments del riu Ebre, amb un contingut de carboni orgànic del 5,8 %, per a poder comparar els resultats sense la influència d’aquest paràmetre. Totes les mostres es van analitzar utilitzant un cromatogràf de gasos acoblat a un espectròmetre de masses.

Molecular and isotopic characterization of biomarkers in the Frick Swiss Jura sediments: A palaeoenvironmental reconstruction on the northern Tethys margin

Molecular and stable carbon isotope compositions of source-specific hydrocarbons have been used to reconstruct palaeoenvironmental conditions during deposition of the Middle Hettangian to Upper Sinemurian sediments on the northern epicontinental Tethys margin, Frick Swiss Jura. Increasing algal, cyanobacterial and phytoplanktonic (i.e., dinoflagellate) contributions associated with the C-13-enrichment of cyanobacteria derivatives (i.e., hopanes and monomethylalkanes) suggest enhanced primary productivity upsection. This is related to the C-13-enrichment of dissolved CO2 in the upper layers and the progressive increase of depth and oxygenation of the water column. In the Middle Hettangian shallow-water environments (lagoon), the occurrence of green sulfur bacteria (Chlorobiaceae) derivatives indicates that the lower part of the water column was strictly anoxic and rich in H2S. Since these bacteria require very low light intensity to grow, these euxinic conditions may be extended up to the photic zone, allowing for anaerobic photosynthesis. Light penetration depth is most likely reduced by high productivity and/or turbidity in the photic zone. In these sediments, C-13-depleted hopanoids (-39.5 parts per thousand) are most likely associated with phototrophic purple sulfur bacteria utilizing isotopically light organic carbon at the base of the aerobic zone. These purple sulfur bacteria may have consumed the H2S used by Chlorobiaceae in the deeper layers and thus, sustained the algae and cyanobacteria productivity in the upper layers. The C-13-depleted carbonate (-13.3 parts per thousand) may be partially related to the anaerobic oxidation of the organic matter during bacterial sulfate-reduction. (c) 2006 Elsevier Ltd. All rights reserved.

Imaging molasse and quaternary sediments in Lake Geneva, Switzerland, with 3-D high-resolution seismic reflection methods: A case study

A high-resolution three-dimensional (3-D) seismic reflection survey was conducted in Lake Geneva, near the city of Lausanne, Switzerland, as part of a project for developing such seismic techniques. Using a single 48-channel streamer, the 3-D site with an area of 1200 m x 600 m was surveyed in 10 days. A variety of complex geologic structures (e.g. thrusts, folds, channel-fill) up to similar to150 m below the water bottom were obtained with a 15 in.(3) water gun. The 3-D data allowed the construction of an accurate velocity model and the distinction of five major seismic facies within the Lower Freshwater Molasse (Aquitanian) and the Quaternary sedimentary units. Additionally, the Plateau Molasse (PM) and Subalpine Molasse (SM) erosional surface, "La Paudeze" thrust fault (PM-SM boundary) and the thickness of Quaternary sediments were accurately delineated in 3-D.

Analisi de compostos orgànics persistents i estudi de la procedència d'hidrocarburs en sediments del mar Mediterrani català

Els sediments del fons marí són molt importants en els ecosistemes aquàtics. Aquests sediments són considerats absorbents naturals, ja que s’hi acumulen moltes substàncies nocives, com ara metalls pesants i contaminants orgànics persistents (COPs). En aquest estudi s’han analitzat mostres de sediments del mar Mediterrani amb la finalitat d’examinar els COPs i la possible procedència d’hidrocarburs derivats del petroli. Les mostres han estat extretes davant de la desembocadura del riu Besòs (se n’ha fet una extracció a 8 km i una altra a 54 km de distància respecte la costa) i davant del municipi català anomenat Vilanova i la Geltrú (se n’ha fet, també, una extracció a 8-10 km i una altra a 30-40 km de distància respecte la costa). D’aquestes mostres, obtingudes per perforació, se n’han analitzat el primer i segon centímetres. S’han quantificat els hidrocarburs aromàtics policíclics (PAHs), els bifenils policlorats (PCBs) i els compostos organoclorats (OCPs) utilitzats antigament com a pesticides. S’ha posat de manifest que en les zones més properes a la costa, les concertacions COPs són més elevades a la regió més meridional, tot i estar davant de la desembocadura del riu Besòs. Segurament això és degut a la influència de la deriva litoral (corrent costaner marí en direcció NE-SW). Finalment, l’índex Phytane/Pristane, l’índex de preferència de carboni o, en anglès Carbon Preference Index (CPI) i la barreja complexa sense resoldre o, en anglès, Unresolved Complex Mixture (UCM) apunten a la conclusió que l’origen dels hidrocarburs analitzats (n-alcans) podria ser petrogènic.

Quantitative paleoparasitology applied to archaeological sediments

Three techniques to extract parasite remains from archaeological sediments were tested. The aim was to improve the sensibility of recommended paleoparasitological techniques applied in archaeological remains. Sediment collected from the pelvic girdle of a human body found in Cabo Vírgenes, Santa Cruz, Argentina, associated to a Spanish settlement founded in 1584 known as Nombre de Jesús, was used to search for parasites. Sediment close to the skull was used as control. The techniques recommended by Jones, Reinhard, and Dittmar and Teejen were used and compared with the modified technique presented here, developed to improve the sensibility to detect parasite remains. Positive results were obtained only with the modified technique, resulting in the finding of Trichuris trichiura eggs in the sediment.

Parasitism in Kansas in the 1800s: a glimpse to the past through the analysis of grave sediments from Meadowlark cemetery

During the excavations of the XIX century Meadowlark cemetery (Manhattan, Kansas, US), samples of sediments were taken from around five skeletons, and analyzed to detect intestinal parasites. No helminth eggs were found, but immunological ELISA tests for Entamoeba histolytica were positive in three samples. The immunological techniques have been successfully used in paleoparasitology to detect protozoan infections. Amoebiasis could have been a severe disease in the past, especially where poor sanitary conditions prevailed, and there is evidence that this cemetery may have been used in a situation where poor sanitary conditions may have prevailed. The presence of this protozoan in US during the late XIX century gives information on the health of the population and provides additional data on the parasite's evolution since its appearance in the New World.

Application of compositional data analysis to geochemical data of marine sediments

In an earlier investigation (Burger et al., 2000) five sediment cores near the RodriguesTriple Junction in the Indian Ocean were studied applying classical statistical methods(fuzzy c-means clustering, linear mixing model, principal component analysis) for theextraction of endmembers and evaluating the spatial and temporal variation ofgeochemical signals. Three main factors of sedimentation were expected by the marinegeologists: a volcano-genetic, a hydro-hydrothermal and an ultra-basic factor. Thedisplay of fuzzy membership values and/or factor scores versus depth providedconsistent results for two factors only; the ultra-basic component could not beidentified. The reason for this may be that only traditional statistical methods wereapplied, i.e. the untransformed components were used and the cosine-theta coefficient assimilarity measure.During the last decade considerable progress in compositional data analysis was madeand many case studies were published using new tools for exploratory analysis of thesedata. Therefore it makes sense to check if the application of suitable data transformations,reduction of the D-part simplex to two or three factors and visualinterpretation of the factor scores would lead to a revision of earlier results and toanswers to open questions . In this paper we follow the lines of a paper of R. Tolosana-Delgado et al. (2005) starting with a problem-oriented interpretation of the biplotscattergram, extracting compositional factors, ilr-transformation of the components andvisualization of the factor scores in a spatial context: The compositional factors will beplotted versus depth (time) of the core samples in order to facilitate the identification ofthe expected sources of the sedimentary process.Kew words: compositional data analysis, biplot, deep sea sediments

Interactions between grain size and composition of sediments: two examples

Two contrasting case studies of sediment and detrital mineral composition are investigated in order to outline interactions between chemical composition and grain size. Modern glacial sediments exhibit a strong dependence of the two parameters due to the preferential enrichment of mafic minerals, especially biotite, in the fine-grained fractions. On the other hand, the composition of detrital heavy minerals (here: rutile) appears to be not systematically related to grain-size, but is strongly controlled by location, i.e. the petrology of the source rocks of detrital grains. This supports the use of rutile as a well-suited tracer mineral for provenance studies. The results further suggest that (i) interpretations derived from whole-rock sediment geochemistry should be flanked by grain-size observations, and (ii) a more sound statistical evaluation of these interactions require the development of new tailor-made statistical tools to deal with such so-called two-way compositions

A Log-linear model of grain size influence on the geochemistry of sediments

Sediment composition is mainly controlled by the nature of the source rock(s), and chemical (weathering) and physical processes (mechanical crushing, abrasion, hydrodynamic sorting) during alteration and transport. Although the factors controlling these processes are conceptually well understood, detailed quantification of compositional changes induced by a single process are rare, as are examples where the effects of several processes can be distinguished. The present study was designed to characterize the role of mechanical crushing and sorting in the absence of chemical weathering. Twenty sediment samples were taken from Alpine glaciers that erode almost pure granitoid lithologies. For each sample, 11 grain-size fractions from granules to clay (ø grades &-1 to &9) were separated, and each fraction was analysed for its chemical composition.The presence of clear steps in the box-plots of all parts (in adequate ilr and clr scales) against ø is assumed to be explained by typical crystal size ranges for the relevant mineral phases. These scatter plots and the biplot suggest a splitting of the full grain size range into three groups: coarser than ø=4 (comparatively rich in SiO2, Na2O, K2O, Al2O3, and dominated by “felsic” minerals like quartz and feldspar), finer than ø=8 (comparatively rich in TiO2, MnO, MgO, Fe2O3, mostly related to “mafic” sheet silicates like biotite and chlorite), and intermediate grains sizes (4≤ø &8; comparatively rich in P2O5 and CaO, related to apatite, some feldspar).To further test the absence of chemical weathering, the observed compositions were regressed against three explanatory variables: a trend on grain size in ø scale, a step function for ø≥4, and another for ø≥8. The original hypothesis was that the trend could be identified with weathering effects, whereas each step function would highlight those minerals with biggest characteristic size at its lower end. Results suggest that this assumption is reasonable for the step function, but that besides weathering some other factors (different mechanical behavior of minerals) have also an important contribution to the trend.Key words: sediment, geochemistry, grain size, regression, step function

Lutz's spontaneous sedimentation technique and the paleoparasitological analysis of sambaqui (shell mound) sediments

Parasite findings in sambaquis (shell mounds) are scarce. Although the 121 shell mound samples were previously analysed in our laboratory, we only recently obtained the first positive results. In the sambaqui of Guapi, Rio de Janeiro, Brazil, paleoparasitological analysis was performed on sediment samples collected from various archaeological layers, including the superficial layer as a control. Eggs of Acanthocephala, Ascaridoidea and Heterakoidea were found in the archaeological layers. We applied various techniques and concluded that Lutz's spontaneous sedimentation technique is effective for concentrating parasite eggs in sambaqui soil for microscopic analysis.