Geocronologia U-Pb SHRIMP no Complexo Mantiqueira na região entre Juiz de Fora e Santos Dumont, sudeste de Minas Gerais

O Orógeno Ribeira representa um cinturão de dobramentos e empurrões, gerado no Neoproterozóico/Cambriano, durante a Orogênese Brasiliana, na borda sul/sudeste do Cráton do São Francisco e compreende quatro terrenos tectono-estratigráficos: 1) o Terreno Ocidental, interpretado como resultado do retrabalhamento do paleocontinente São Francisco, é constituído de duas escamas de empurrão de escala crustal (Domínios Andrelândia e Juiz de Fora); 2) o Terreno Oriental representa uma outra microplaca e abriga o Arco Magmático Rio Negro; 3) o Terreno Paraíba do Sul, que constitui-se na escama superior deste segmento da faixa; e 4) o Terreno Cabo Frio, cuja docagem foi tardia, ocupa pequena área no litoral norte do estado do Rio de Janeiro. Em todos os diferentes compartimentos do segmento central da Faixa Ribeira podem ser identificadas três unidades tectono-estratigráficas: 1) unidades pré-1,8 Ga. (ortognaisses e ortogranulitos do embasamento); 2) rochas metassedimentares pós-1,8 Ga; e 3) granitóides/charnockitóides brasilianos. O Complexo Mantiqueira é composto por ortognaisses migmatíticos, tonalíticos a graníticos, e anfibolitos associados, constitui o embasamento pré-1,8 Ga das rochas da Megasseqüência Andrelândia no domínio homônimo do Terreno Ocidental. Foram integrados 68 dados litogeoquímicos dentre ortognaisses e metabasitos do Complexo Mantiqueira. As rochas dessa unidade pertencem a duas séries distintas: série calcioalcalina (rochas intermediárias a ácidas); e série transicional (rochas básicas, ora de afinidade toleítica, ora alcalina). Com base em critérios petrológicos, análise quantitativa e em valores [La/Yb]N, verificou-se que o Complexo Mantiqueira é bastante heterogêneo, incluindo diversos grupos petrogeneticamente distintos. Dentre as rochas da série transicional, foram identificados 2 conjuntos: 1) rochas basálticas toleiíticas, com [La/Yb]N entre 2,13 e 4,72 (fontes do tipo E-MORB e/ou intraplaca);e 2) rochas basálticas de afinidade alcalina, com [La/Yb]N entre 11,79 e 22,78. As rochas da série calciolacalina foram agrupadas em cinco diferentes conjuntos: 1) ortognaisses migmatíticos quartzo dioríticos a tonalíticos, com [La/Yb]N entre 11,37 e 38,26; 2) ortognaisses bandados de composição quarzto diorítica a granodiorítica, com [La/Yb]N entre 4,35 e 9,28; 3) ortognaisses homogênos de composição tonalítica a granítica, com [La/Yb]N entre 16,57 e 38,59; 4) leucognaisses brancos de composição tonalítica/trondhjemítica a granítica, com [La/Yb]N entre 46,69 e 65,06; e 5) ortognaisse róseo porfiroclástico de composição tonalítica a granítica, com [La/Yb]N entre 82,70 e 171,36. As análises geocronológicas U-Pb SHRIMP foram realizadas no Research School of Earth Science (ANU/Canberra/Austrália). Foram obtidas idades paleoproterozóicas para as rochas das duas séries identificadas, interpretadas como a idade de cristalização dos protólitos magmáticos desses gnaisses e metabasitos. Os resultados obtidos mostram uma variação de idades de cristalização de 2139 35 a 2143,4 9,4, para as rochas da série transicional, e de 2126,4 8 a 2204,5 6,7, para aquelas da série calcioalcalina. Dentre todas as amostras estudadas, apenas a amostra JF-CM-516IV forneceu dados discordantes de idades arqueanas (292916 Ma), interpretados como dados de herança. Contudo, evidências dessa herança semelhantes a esta são observadas em outras amostras. Ambas as séries também apresentaram idades de metamorfismo neoproterozóico, no intervalo de 548 17 Ma a 590,5 7,7 Ma que é consistente com o metamorfismo M1 (entre 550 e 590 Ma), contemporâneo à colisão entre os Terrenos Ocidental e Oriental do setor central da Faixa Ribeira (Heilbron, 1993 e Heilbron et al., 1995).

Litogeoquímica, geocronologia (U-Pb) e geoquímica isotópica (Sr-Nd) dos granitoides do Domínio Cambuci (Faixa Ribeira) na região limítrofe dos Estados do Rio de Janeiro e Espírito Santo

Os granitoides do Domínio Cambuci, na região limítrofe entre os estados do Rio de Janeiro e Espírito Santo, foram separados em quatro principais grupos: (1) Complexo Serra da Bolívia (CSB) - Ortogranulitos e Ortognaisses Heterogêneos; Ortognaisse Cinza Foliado; e charnockitos da Região de Monte Verde (2) Leucogranitos/leucocharnockitos gnaissificados da Suíte São João do Paraíso (SSJP) (3) Granito Cinza Foliado (4) Leucogranito isotrópico. O CSB é caracterizado pelo magmatismo de caráter calcioalcalino do tipo I, oriundo em ambiente de arco vulcânico (Suíte Monte Verde) e retrabalhamento crustal (ortogranulitos leucocráticos). O Ortogranulito esverdeado fino, é considerado no presente estudo como rocha do embasamento para o Terreno Oriental, cristalizada durante o paleoproterozoico - Riaciano (2184,3 21 Ma) e recristalizada durante o evento metamórfico Brasiliano no neoproterozoico - Edicariano (607,2 1,5 Ma), cuja idade TDM é de 2936 Ma. O Ortogranulito leucocrático médio cristalizou-se no neoproterozoico Edicariano (entre 592 e 609 Ma) e idade TDM ca. 2100 Ma, ao qual apresenta registro de herança no paleoproterozoico. A Suíte Monte Verde caracteriza-se por um magmatismo calcioalcalino e a Suíte Córrego Fortaleza, por um magmatismo calcioalcalino de alto K, ambas com assinatura de arco magmático. Registram dois pulsos magmáticos, em no Neoproterozoico - Edicarano: um em 592 2 Ma, idade do charnoenderbito, com idade TDM 1797 Ma, e outro em 571,2 1,8 Ma (injeção de um charnockitoide). Para todas as rochas do CSB são registradas feições protomiloníticas, miloníticas e localmente ultramiloníticas. Os dados geoquímicos indicam que os granitoides da SSJP são da série calcioalcalina de alto K, gerados no Neoproterozoico (idades que variam desde 610,3 4,7 Ma até, 592,2 1,3 Ma. As idades TDM revelam valores discrepantes para duas amostras: 1918 Ma e 2415 Ma, sugerindo que tenham sido geradas de diferentes fontes. O Granito Cinza Foliado é da Série Shoshonítica, metaluminoso do tipo I e, de ambiência tectônica de granitos intraplaca. Entretanto, poderiam ter sido fomados em ambiente de arco cordilheirano, havendo contaminação de outras fontes crustais. Fato este pode ser confirmado pelas as idades TDM calculadas ≈ 1429 1446 Ma. O Leucogranito isotrópico ocorre em forma de diques de direção NW, possui textura maciça e é inequigranular. Dados geoquímicos revelam que são granitoides metaluminosos do tipo I da série shoshonítica, e, de acordo com a ambiência tectônica, são granitos intraplaca. O Leucogranito Isotrópico representa o magmatismo pós-colisional ao qual ocorreu entre 80 a 90 Ma de anos após o término do evento colisional na região central da Faixa Ribeira. O Leucogranito Issotrópico cristalizou-se no cambriano (512,3 3,3 Ma e 508,6 2,2 Ma) e com idades TDM ca. 1900

Geocronologia (40Ar/39Ar e U-Pb), petrografia e litogeoquímica da intrusão alcalina do Marapicu RJ

A intrusão alcalina do Marapicu é uma intrusão localizada no maciço Marapicu-Gericinó-Mendanha situado na região metropolitana do Rio de Janeiro. Este maciço é formado por dois corpos alcalinos: Marapicu e Mendanha que fazem parte do lineamento magmático Poços de Caldas-Cabo Frio. Este lineamento inclui dezenas de corpos ígneos alcalinos de idade Cretácea com uma direção preferencial WNW-ESE. Os litotipos mais abundantes do Maciço Marapicu são representados por nefelina sienitos e sienitos de caráter plutônico, além de, fonolitos caracterizados por intrusões rasas geralmente em forma de diques. Além desses litotipos foram amostradas duas rochas com características químicas de magma parental (lamprófiro e fonolito tefrítico), porém, essas duas amostras não apresentam relação genética com as demais. Também foi amostrado um nefelina sienito que possui sodalita azul como feldspatóide, sendo assim, chamado de nefelina sodalita sienito. Entre os fonolitos coletados para esse trabalho, uma amostra apresenta granada melanita em sua assembleia mineralógica, e esta foi então denominada melanita fonolito. Quimicamente as rochas do Marapicu formam uma série alcalina predominantemente insaturada em sílica, miaskítica e metaluminosa. Dentro desta série se observam duas suítes sendo uma potássica (predominante) e outra sódica. A evolução química do corpo se deu por processo de cristalização fracionada com ou sem assimilação de crosta continental provavelmente dentro de uma fonte mantélica enriquecida. Duas idades de cristalização foram obtidas para o Maciço do Marapicu sendo uma idade 40Ar/39Ar de 80,46 0,58 Ma em hornblenda, e uma idade U-Pb em zircão bastante concordante de 78,0 2,1 Ma. Os dados apresentados aqui em conjunto com dados da literatura apontam para dois modelos geodinâmicos de geração dos corpos alcalinos do sudeste brasileiro, um considera a existência de uma pluma mantélica gerada na astenosfera, o outro tem por base a hipótese de flexura crustal e considera que a carga de sedimentos depositados na plataforma continental exerceria esforços que provocariam fraturas profundas permitindo a ascenção desses magmas. O presente trabalho vem para contribuir no entendimento do alojamento dos corpos alcalinos do sudeste brasileiro através do estudo especifico do Maciço Marapicu em conjunto com dados da literatura

Evolution of the tectogene concept, 1930-1965

The tectogene, or crustal downbuckle, was proposed in the early 1930s by F.A. Vening Meinesz to explain the unexpected belts of negative gravity anomalies in island arcs. He attributed the isostatic imbalance to a deep sialic root resulting from the action of subcrustal convection currents. Vening Meinesz's model was initially corroborated experimentally by P.H. Kuenen, but additional experiments by D.T. Griggs and geological analysis by H.H. Hess in the late 1930s led to substantial revision in detail. As modified, the tectogene provided a plausible model for the evolution of island arcs into alpine mountain belts for another two decades. Additional revisions became necessary in the early 1950s to accommodate the unexpected absence of sialic crust in the Caribbean and the marginal seas of the western Pacific. By 1960 the cherished analogy between island arcs and alpine mountain belts had collapsed under the weight of the detailed field investigations by Hess and his students in the Caribbean region. Hess then incorporated a highly modified form of the tectogene into his sea-floor spreading hypothesis. Ironically, this final incarnation of the concept preserved some of the weaker aspects of the 1930s original, such as the ad hoc explanation for the regular geometry of island arcs.

Propriedades fotoluminescentes e higroscopia do composto SrAl2O4 dopado com íons de Ni2+

Amostras foram preparadas pelo método de difusão a partir dos reagentes químicos SrCO3, Al2O3 e NiO em proporções estequiométricas. Medidas por difração de raios X mostraram que as amostras possuem uma única fase: SrAl2O4. Neste trabalho apresentamos imagens de microscopia eletrônica de varredura das amostras SrAl2O4 dopadas com 0,1%, 0,5%, 1,0%, 2,0%, 5,0% e 10,0% de íons de Ni2+, medidas de fotoluminescência, excitação da fotoluminescência da amostra SrAl2O4 dopada com 1,0% de íons de Ni2+, medidas de absorção fotoacústica das amostras SrAl2O4 dopadas com 1,0%, 2,0%, 5,0% e 10,0% de íons de Ni2+. Estas medidas foram realizadas a temperatura ambiente para investigar as transições eletrônicas dos íons divalente de níquel que entraram substitucionalmente nos sítios de Sr2+ da rede do SrAl2O4. Os resultados ópticos mostram a existência de três centros emissores de Ni2+. De acordo com a literatura, a estrutura do SrAl2O4 é composta de dois sítios octaédrico distintos de íons de Sr2+, o Sr12+ e o Sr22+, cujas distâncias médias Sr1 O e Sr2 O são, respectivamente, 2,800 Ǻ e 2,744 Ǻ. Visto que os íons de Ni2+ tendem a substituir os íons de Sr2+, devido ao fato de possuírem a mesma valência, é necessário considerar que uma parte dos íons de Ni2+ ocuparam os sítios dos íons de Al3+ na rede do SrAl2O4 para justificar a existência de um terceiro centro emissor de Ni2+ nesse composto. Uma novo sítio octaédrico para os íons de Ni2+ foi estimado a partir do valor da aresta do sítio tetraédrico ocupado pelos íons de Al3+ na rede do SrAl2O4 (considerando o raio iônico do Ni2+ como aproximadamente 40% maior do que o raio iônico do Al3+). As transições eletrônicas presentes nos espectros de excitação e absorção fotoacústica permitiram determinar os parâmetros de campo cristalino (Dq) e Racah (B e C) para os três sítios diferentes ocupados pelos íons de Ni2+ no SrAl2O4. Neste caso, os resultados mostraram que o sítio II dos íons de Ni2+ é associado à posição do Sr1 e possuem um parâmetro Dq menor e que o parâmetro Dq associado aos íons de Ni2+ que substituíram os íons de Sr no sitio I, o qual, por sua vez é associado à posição do Sr2. E, por fim, o sítio III que possui o menor parâmetro de campo cristalino Dq, portanto a maior distância íon ligante, é identificado como aquele relacionado ao rearranjo octaédrico local das antigas posições de Al3+. O caráter higroscópico do SrAl2O4:Ni2+ é observado a partir dos espectros de absorção fotoacústica e os modos de vibração de estiramento das ligações Ni OH e O H são identificadas nos espectros.

The nature and origin of deep ocean clay crust from the Gulf of Guinea

Deep ocean sediments off the west coast of Africa exhibit a peculiar undrained strength profile in the form of a crust, albeit of exceptionally high water content, overlying normally consolidated clay. Hot-oil pipelines are installed into these crustal sediments, so their origins and characteristics are of great interest to pipeline designers. This paper provides evidence for the presence of burrowing invertebrates in crust material, and for the way sediment properties are modified through their creation of burrows, and through the deposition of faecal pellets. A variety of imaging techniques are used to make these connections, including photography, scanning electron microscopy and X-ray computer tomography. However, the essential investigative technology is simply the wet-sieving of natural cores, which reveals that up to 60% by dry mass of the crustal material can consist of smooth, highly regular, sand-sized capsules that have been identified as the faecal pellets of invertebrates such as polychaetes. Mechanical tests reveal that these pellets are quite robust under effective stresses of the order of 10 kPa, acting like sand grains within a matrix of fines. Their abundance correlates closely with the measured strength of the crust. While this can easily be accepted in the context of a pellet fraction as high as 60%, the question arises how a smaller proportion of pellets, such as 20%, is apparently able to enhance significantly the strength of a sediment that otherwise appears to be normally consolidated. A hypothesis is suggested based on the composition of the matrix of fines around the pellets. These appear to consist of agglomerates of clay platelets, which may be the result of the breakdown of pellets by other organisms. Their continued degradation at depths in excess of 1 m is taken to explain the progressive loss of crustal strength thereafter.

Tectonic Evolution and Dynamics of Deepwater Area of Pearl River Mouth Basin, Northern South China Sea

Quantitative studies on the evolution and dynamics of the deepwater area of Pearl River Mouth basin (PRMB) were carried out based on the latest geological and seismic data. The study area is generally in an extensional state during the Cenozoic. The major extension happened in the earlier syn-rift stages before 23 Ma and the extension after 23 Ma is negligible. Two rapid subsidence periods, 32-23 Ma and 5.3-2.6 Ma, are identified, which are related to the abrupt heat decay during margin breakup and the collision between the Philippine Sea plate and the Eurasian plate, respectively. The strongest crustal thinning in the Baiyun (sic) sag may trigger the syn-rift volcanism along the weak faulted belt around the sag. The Cenozoic tectonic evolution of the study area could be divided into five stages: rifting (similar to 50-40 Ma), rift-drift transition (similar to 40-32 Ma), early post-breakup (similar to 32-23 Ma), thermal subsidence (similar to 23-5.3 Ma) and neotectonic movement (similar to 5.3-0 Ma).

Geochemical properties of the variolitic andesite from Susong in the Dabie orogenic belt, China

The variolitic andesite from the Susong County in the Dabie Mountains implies that it was erupted in water. The mineralogy of the varioles is primarily radiate plagioclase (albite sind oligoclase), with little pyroxene, hornblende and quartz (derived from alteration). The pyroxene, hornblende and quartz are in the interstices between plagiocalse. The matrix consists of glass, hornblende, chlorite, epidote and zoisite. It is clearly subjected an extensive alteration. The andesite has an uncommon chemical composition. The SiO2 content is about 56.8%, TiO2 = 0.9%, MgO = 6.4%, Fe2O3 (tot) = 6.7%similar to 7.6%, 100Mg/(Mg + Fe) = 64.1 similar to 66.2. Mg-# is significantly high. The andesite has high abundances of large-lithophile trace elements (e.g. K, Ba. Sr, LREE), e.g. La/Nb = 5.56 similar to 6.07, low abundances of high-strength-field elements (HFSE e.g. Ta, Nb, P, Ti), particularly Ta and Nb strongly depleted. These are consistent with the characteristics of subduction-related magmas. In the spider diagram of trace elements, from Ce to right hand, the abundances of elements decrease quickly, showing a character of the continental margins. There has a strong punishment of light-rare-earth elements, with a significant diffraction of REEs (the mean value of (La/Yb)(N) is 32.84). No Eu anomaly, but there are anomaly high (La/Yb)(N) = 28.63 similar to 36.74, (La/Y)(N) = 70.33 similar to 82.4. The elements Y and Yb are depleted greatly, Y<20 g/g, Y-N = 2.74 similar to 2.84, Yb-N = 2.18 similar to 2.35. From the La-(La/Sm) diagram, the andesite is derived from partial melting. But the epsilone value of Nd is - 18.7 similar to -19.2, so that the material source may be the mantle materials affected by the crustal materials. The Nd model age is 1.9 Ga indicating that the variolitic basaltic andesite was resulted from the mantle wedge of North China block, which had the Nd model age of 2.5Ga, when the Yangze block which had the Nd model age of 1.7Ga subducted beneath it. So the variolitic andesite has characteristics of the island-are volconic rocks oil a continental basement in the vicinity of the destructive continental margin.

Genesis of Th-230 excess in basalts from mid-ocean ridges and ocean islands: Constraints from the global U-series isotope database and major and rare earth element geochemistry

Based on Th-230-U-238 disequilibrium and major element data from mid-ocean ridge basalts (MORBs) and ocean island basalts (OIBs), this study calculates mantle melting parameters, and thereby investigates the origin of Th-230 excess. (Th-230/U-238) in global MORBs shows a positive correlation with Fe-8, P (o), Na-8, and F-melt (Fe-8 and Na-8 are FeO and Na2O contents respectively after correction for crustal fractionation relative to MgO = 8 wt%, P (o)=pressure of initial melting and F (melt)=degree of melt), while Th-230 excess in OIBs has no obvious correlation with either initial mantle melting depth or the average degree of mantle melting. Furthermore, compared with the MORBs, higher (Th-230/U-238) in OIBs actually corresponds to a lower melting degree. This suggests that the Th-230 excess in MORBs is controlled by mantle melting conditions, while the Th-230 excess in OIBs is more likely related to the deep garnet control. The vast majority of calculated initial melting pressures of MORBs with excess Th-230 are between 1.0 and 2.5 GPa, which is consistent with the conclusion from experiments in recent years that D (U)> D (Th) for Al-clinopyroxene at pressures of > 1.0 GPa. The initial melting pressure of OIBs is 2.2-3.5 GPa (around the spinel-garnet transition zone), with their low excess Ra-226 compared to MORBs also suggesting a deeper mantle source. Accordingly, excess Th-230 in MORBs and OIBs may be formed respectively in the spinel and garnet stability field. In addition, there is no obvious correlation of K2O/TiO2 with (Th-230/U-238) and initial melting pressure (P (o)) of MORBs, so it is proposed that the melting depth producing excess Th-230 does not tap the spinel-garnet transition zone. OIBs and MORBs in both (Th-230/U-238) vs. K2O/TiO2 and (Th-230/U-238) vs. P (o) plots fall in two distinct areas, indicating that the mineral phases which dominate their excess Th-230 are different. Ce/Yb-Ce curves of fast and slow ridge MORBs are similar, while, in comparison, the Ce/Yb-Ce curve for OIBs shows more influence from garnet. The mechanisms generating excess Th-230 in MORBs and OIBs are significantly different, with formation of excess Th-230 in the garnet zone only being suitable for OIBs.

Geochemical and isotopic characteristics of volcanic rocks from the northern East China Sea shelf margin and the Okinawa Trough

Volcanic rocks both from the northern East China Sea (NECS) shelf margin and the northern Okinawa Trough are subalkaline less aluminous, and lower in High Field Strength Elements (HFSE). These rocks are higher in Large Ion Lithophile Elements (LILE), thorium and uranium contents, positive lead anomalies, negative Nb-Ta anomalies, and enrichment in Light Rare Earth Elements (LREE). Basalts from the NECS shelf margin are akin to Indian Ocean Mid-Ocean Ridge Basalt (MORB), and rhyolites from the northern Okinawa Trough have the highest Pb-207/Pb-208 and Pb-208/Pb-204 ratios. The NECS shelf margin basalts have lower Sr-87/Sr-86 ratios, epsilon(Nd) and sigma O-18 than the northern Okinawa Trough silicic rocks. According to K-40-Ar-40 isotopic ages of basalts from the NECS shelf margin, rifting of the Okinawa Trough may have been active since at least 3.65-3.86 Ma. The origin of the NECS shelf margin basalt can be explained by the interaction of melt derived from Indian Ocean MORB-like mantle with enriched subcontinental lithosphere. The basalts from both sides of the Okinawa Trough may have a similar origin during the initial rifting of the Okinawa Trough, and the formation of basaltic magmas closely relates to the thinning of continental crust. The source of the formation of the northern Okinawa Trough silicic rocks was different from that of the middle Okinawa Trough, which could have been generated by the interaction of basaltic melt with an enriched crustal component. From the Ryukyu island arc to East China, the Cenozoic basalts have apparently increasing trends of MgO contents and ratios of LREE to Heavy Rare Earth Elements (HREE), suggesting that the trace element variabilities of basalts may have been influenced by the subduction of the Philippine Sea plate, and that the effects of subduction of the Philippine Sea plate on the chemical composition of basaltic melts have had a decreasing effect from the Ryukyu island arc to East China.

Rifting process and formation mechanisms of syn-rift stage prolongation in the deepwater basin, northern South China Sea

Based on the latest seismic and geological data, tectonic subsidence of three seismic lines in the deepwater area of Pearl River Mouth Basin (PRMB), the northern South China Sea (SCS), is calculated. The result shows that the rifting process of study area is different from the typical passive continental margin basin. Although the seafloor spreading of SCS initiated at 32 Ma, the tectonic subsidence rate does not decrease but increases instead, and then decreases at about 23 Ma, which indicates that the rifting continued after the onset of seafloor spreading until about 23 Ma. The formation thickness exhibits the same phenomenon, that is the syn-rift stage prolonged and the post-rift thermal subsidence delayed. The formation mechanisms are supposed to be three: (1) the lithospheric rigidity of the northern SCS is weak and its ductility is relatively strong, which delayed the strain relaxation resulting from the seafloor spreading; (2) the differential layered independent extension of the lithosphere may be one reason for the delay of post-rift stage; and (3) the southward transition of SCS spreading ridge during 24 to 21 Ma and the corresponding acceleration of seafloor spreading rate then triggered the initiation of large-scale thermal subsidence in the study area at about 23 Ma.

柴达木盆地西区新生代构造演化

The Qaidam Basin constitutes a major portion of the northeastern Tibetan Plateau, and an understanding of its tectonic development will help decipher how the Tibetan Plateau was formed. It is shown that Late Cretaceous–Paleocene deposits of the western Qaidam Basin can be well correlated with their counterparts of the southwestern Tarim Basin, implying that the two regions were originally connected or were in the same depositional basin during that period of time. The Qaidam Basin commenced subsiding due to crustal shortening in the Eocene, and it has subsequently evolved into an independent basin since the Miocene. The main depocenter was noticeably persistent in the middle of the western Qaidam Basin from Eocene to Miocene time, and then it shifted to the east. On the basis of spatial stratigraphic correlation and restoration of sedimentary processes, we surmise that there existed a proto–Qaidam Basin during the Paleogene, where the Suhai and Kumukol Basins represent its northern and southern margins, respectively. The Suhai and Kumukol Basins were subsequently isolated from the Qaidam Basin as a result of basinward thrusting in basin-margin areas. It is shown that the western Qaidam Basin experienced three distinct stages: the first stage was characterized by a simple synclinal depression; the second stage was marked by occurrence of reverse faults at inflection points of the megafold and continuous subsidence in the middle of the basin; and the third stage featured intrabasinal deformation and uplift. The eastern Qaidam Basin underwent a diverse evolution and became the main depositional area in the Quaternary. It is suggested that the Qaidam Basin should be generated as a result of crustal buckling or folding, manifesting itself as a synclinal depression. The crustal folding model can account for a number of observations, including localization of the depocenter in the middle of the basin, nearly concomitant deformation on the south and north sides of the Qaidam Basin, occurrence of major high-angle reverse faults at basin margins, and generation of adjacent intermontane Suhai and Kumukol Basins. A tectonic model is accordingly advanced to illustrate Cenozoic tectonics of the Qaidam Basin.

南海大陆边缘地壳结构与盆地形成机制--以珠江口－琼东南盆地为例

South China Sea is located in the convergence of Eurasian plate, the Pacific Ocean plate and Indian Ocean-Australia plate. The total area is about 3,500,000 km2, the geologic structure is complicated, and the structure line cut off reciprocal is the marginal sea taking form by that the seafloor spreads during the middle Oligocene. South China Sea continental margin have developed more than 10 large oil-gas bearing basins and a number of medium-small sized basins. These basins contain abundant mineral resources such as oil & gas. The marginal deepwater area in the north part of South China Sea has become our country’s strategic energy prospecting frontier. The deepwater area of Zhujiangkou and Qiongdongnan basins is the research target in this thesis. The thesis studied deep structure and the earth dynamics of the north part of South China Sea margin, and these researches provide scientific basis for oil-gas resources strategic investigation and valuation in deepwater sea area of north part slope of South China Sea. In order to develop the research of rebuilding velocities and density architecture of earth shell in region of interest, in marginal deepwater area in the north part of South China, we adopted 14 long-cable seismic reflection profile data of 3556.41 kilometers in total, the gravity measurement data along profiles (3851.44 kilometers in total), the magnetic observation along profiles (3838.4 kilometers in total) and depth measurement along profile, the logging data of 11 wells in project, the interpreted fault parameter and preexisting geologic and geophysical research achievement. This thesis has carried out concretely studying research as follows: 1. Overlay-velocity data sampling and analysis, interval velocity calculation, time-depth conversion, model building of earth shell velocity and layering character of earth shell are studied on 14 deep sections. Velocity structure in region of interest has revealed: Changchang is the sag with thinnest crust in Qiongdongnan basin; the sedimentary thickness lowers gradually from north to south, and the thickness change from west to east is milder. The sags’ sedimentary velocities in Qiongdongnan basin have obvious demarcation. The velocity of the 8000 meters sedimentary rocks is 4700 m/s in Shunde sag and Baiyun sag, and is the lowest; at that depth, the velocity very different in Liwan sag and Baiyun sag, which is about 800m/s. 2. Extracting gravity data and building of initial crust density model along the section; With Bouguer gravity anomaly data as constraint, revising density distributes of initial model, and building the crust density model. 3. With crust velocity and density as constraint, correcting the effect of thermobaric field and constructing constitution structure of rock in region of interest. By this research, we known that rocks in Zhujiangkou upper crustal layer are chiefly granite-gneiss, quartzite, granodiorite and basalt, however, rocks in Qiongdongnan basin upper earth shell are chiefly composed of granite-gneiss, quartzite, granodiorite, diorite and basalt. 4. Synthetically crust velocity and density structure, gaining expanding factor on crust and entire crust along section. The result is indicated: the expanding factor in every sag rises from northwest to southeast, which have reflected thinning characteristic of crust from continent to ocean. Intra-crustal deformation degree in Changchang and Ledong-Lingshui sag is bigger than that in Songnan-Baodao sag. Entire crust extension factor in Changchang and Songnan-Baodao sag is greater than that in Ledong-Lingshui sag, which can make an explanation of frequently event and longer heating process in middle-east of Qiongdongnan basin. 5. Synthesize multidisciplinary information to discuss the earth dynamics significance of discordogenic seismic profile in deepwater area of Zhujiangkou and Qiongdongnan basins.

中国东部沙地物源示踪及地质意义

Heavy mineral assemblages, chemical compositions of diagnostic heavy minerals such as garnet and tourmaline, and U-Pb ages and Hf isotopic compositions of zircons are very effective means to determine sediment provenance. An integrated application of the above provides insight on the lithologies, crystallization ages and crustal formation ages of the parent magma of sediment source areas. As a result, the locations and characteristics of potential source areas can be constrained and contributions of different source regions may be evaluated. In addition, the study provides evidence for the magmatic and tectonic history of source areas using a novel approach. The heavy mineral assemblages, and chemical compositions of detrital garnets and tourmalines, U-Pb ages and Hf isotopic compositions of zircons for sand and loess samples deposited since the Last Glacial Maximum (LGM) from the Hulunbeier, Keerqin and Hunshandake sandlands were analyzed and compared to those of central-southern Mongolia, the central Tarim and surrounding potential source areas, the Central Asian Orogenic Belt (CAOB) and North China Craton (NCC). The following remarks on provenance and tectonic history can be made: 1. The source compositional characteristics of the Hulunbeier, Keerqin and Hunshandake sandlands are similar. They are derived from the CAOB and NCC whose contributions for the Keerqin and Hunshandake sandland are about 50%. For the Hulunbeier sandland it is somewhat less, about 40%. 2. Loesses around of the sandlands have the identical source signiture as the sands, implying that they are sorted by the same wind regime. 3. The source characteristics of the present and LGM sands are the same, providing direct evidence that the present sands originated from the reworking of LGM sands. 4. The provenance characteristics of the three sandlands differ from those of the Tarim. As a result, the possibility that the three eastern sandlands were sourced from the Taklimakan desert can be ruled out. 5. The source compositions of sand samples derived from the CAOB indicate that the occurrence of Archean and Paleoproterozoic metamorphic basement rocks is limited and continuous subduction-accretion events from the Neoproterozoic to the Mesozoic occurred. This implies that the CAOB is a orogenic collage belt similar to the present day southwest-Pacific, and formed by the amalgamation of small forearc and backarc ocean basins occurring between island arcs and microcontinents during continuous collision and accretion. The Hf isotopic signitures of detrital zircons indicate that large amounts of juvenile mantle materials were added to the CAOB crust during the Phanerozoic.

青藏高原及邻区面波频散反演--岩石圈-软流层体系结构研究

The Qinghai-Tibet Plateau lies in the place of the continent-continent collision between Indian and Eurasian plates. Because of their interaction the shallow and deep structures are very complicated. The force system forming the tectonic patterns and driving tectonic movements is effected together by the deep part of the lithosphere and the asthenosphere. It is important to study the 3-D velocity structures, the spheres and layers structures, material properties and states of the lithosphere and the asthenosphere for getting knowledge of their formation and evolution, dynamic process, layers coupling and exchange of material and energy. Based on the Rayleigh wave dispersion theory, we study the 3-D velocity structures, the depths of interfaces and thicknesses of different layers, including the crust, the lithosphere and the asthenosphere, the lithosphere-asthenosphere system in the Qinghai-Tibet Plateau and its adjacent areas. The following tasks include: (1)The digital seismic records of 221 seismic events have been collected, whose magnitudes are larger than 5.0 over the Qinghai-Tibet Plateau and its adjacent areas. These records come from 31 digital seismic stations of GSN , CDSN、NCDSN and part of Indian stations. After making instrument response calibration and filtering, group velocities of fundamental mode of Rayleigh waves are measured using the frequency-time analysis (FTAN) to get the observed dispersions. Furthermore, we strike cluster average for those similar ray paths. Finally, 819 dispersion curves (8-150s) are ready for dispersion inversion. (2)From these dispersion curves, pure dispersion data in 2°×2° cells of the areas (18°N-42°N, 70°E-106°E) are calculated by using function expansion method, proposed by Yanovskaya. The average initial model has been constructed by taking account of global AK135 model along with geodetic, geological, geophysical, receiving function and wide-angle reflection data. Then, initial S-wave velocity structures of the crust and upper mantle in the research areas have been obtained by using linear inversion (SVD) method. (3)Taking the results of the linear inversion as the initial model, we simultaneously invert the S wave velocities and thicknesses by using non-linear inversion (improved Simulated Annealing algorithm). Moreover, during the temperature dropping the variable-scale models are used. Comparing with the linear results, the spheres and layers by the non-linear inversion can be recognized better from the velocity value and offset. (4)The Moho discontinuity and top interface of the asthenosphere are recognized from the velocity value and offset of the layers. The thicknesses of the crust, lithosphere and asthenosphere are gained. These thicknesses are helpful to studying the structural differentia between the Qinghai-Tibet Plateau and its adjacent areas and among geologic units of the plateau. The results of the inversion will provide deep geophysical evidences for studying deep dynamical mechanism and exploring metal mineral resource and oil and gas resources. The following conclusions are reached by the distributions of the S wave velocities and thicknesses of the crust, lithosphere and asthenosphere, combining with previous researches. (1)The crust is very thick in the Qinghai-Tibet Plateau, varying from 60 km to 80 km. The lithospheric thickness in the Qinghai-Tibet Plateau is thinner (130-160 km) than its adjacent areas. Its asthenosphere is relatively thicker, varies from 150 km to 230 km, and the thickest area lies in the western Qiangtang. India located in south of Main Boundary thrust has a thinner crust (32-38 km), a thicker lithosphere of about 190 km and a rather thin asthenosphere of only 60 km. Sichuan and Tarim basins have the crust thickness less than 50km. Their lithospheres are thicker than the Qinghai-Tibet Plateau, and their asthenospheres are thinner. (2)The S-wave velocity variation pattern in the lithosphere-asthenosphere system has band-belted distribution along east-westward. These variations correlate with geology structures sketched by sutures and major faults. These sutures include Main Boundary thrust (MBT), Yarlung-Zangbo River suture (YZS), Bangong Lake-Nujiang suture (BNS), Jinshajiang suture (JSJS), Kunlun edge suture (KL). In the velocity maps of the upper and middle crust, these sutures can be sketched. In velocity maps of 250-300 km depth, MBT, BNS and JSJS can be sketched. In maps of the crustal thickness, the lithospheric thickness and the asthenospheric thickness, these sutures can be still sketched. In particular, MBT can be obviously resolved in these velocity maps and thickness maps. (3)Since the collision between India and Eurasian plate, the “loss” of surface material arising from crustal shortening is caused not only by crustal thickening but also by lateral extrusion material. The source of lateral extrusion lies in the Qiangtang block. These materials extrude along the JSJS and BNS with both rotation and dispersion in Daguaiwan. Finally, it extends toward southeast direction. (4)There is the crust-mantle transition zone of no distinct velocity jump in the lithosphere beneath the Qiangtang Terrane. It has thinner lithosphere and developed thicker asthenosphere. It implies that the crust-mantle transition zone of partial melting is connected with the developed asthenosphere. The underplating of asthenosphere may thin the lithosphere. This buoyancy might be the main mechanism and deep dynamics of the uplift of the Qinghai-Tibet hinterland. At the same time, the transport of hot material with low velocity intrudes into the upper mantle and the lower crust along cracks and faults forming the crust-mantle transition zone.