Gas permeability in polyimides from oxydianiline and isomeric thiaphthalic dianhydride or 1,4-bis(dicarboxyphenoxy) benzene dianhydride

The gas permeability and permselectivity properties were investigated of polyimides, prepared from 3,3',4,4'- and 2,2',3,3'-thiaphthalic dianhydride (p-TDPA and m-TDPA, respectively), or 1,4-bis(3,4-dicarboxyphenoxy)- and 1,4-bis(2,3-dicarboxyphenoxy) benzene dianhydride (p-HQDPA and m-HQDPA, respectively), and 4,4-oxydianiline. The polyimides prepared from meta-dianhydrides, which have lower chain-segment packing density, possess higher permeability and lower permselectivity than those prepared from para-dianhydrides. Copyright (C) 1996 Elsevier Science Ltd.

Structure/permeability and permselectivity relationship of polyetherimides from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride .1.

Gas permeability coefficients of a series of aromatic polyetherimides, which were prepared from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride (HQDPA) and various aromatic diamines, to H-2, CO2, O-2, N-2 and CH4 have been measured under 7 atm pressure and over the temperature range 30-150 degrees C. A significant change in permeability and permselectivity, which resulted from a systematic variation in chemical structure of the polyetherimides, was found. Generally, increases in permeability of the polyetherimides are accompanied by decreases in permselectivity. The order of decrease of the permeability coefficients is as follows: HQDPA-IPDA > HQDPA-DDS > HQDPA-MDA > HQDPA-ODA > HQDPA-DABP > HQDPA-BZD. However, HQDPA-DMoBZD and HQDPA-DMoMDA, with bulky methoxy side-groups on the aromatic rings of the diamine residue, display both high permeability coefficients and high permselectivity. The favourable gas separation property, excellent thermal and chemical stability, and high mechanical strength make HQDPA-DMoBZD and HQDPA-DMoMDA promising candidates for membrane-based gas separation applications.

A new thermoplastic polyimide composite based on 1,4-(3,4-dicarboxyphenoxyl)benzene/4,4'-methylene dianiline

New thermoplastic polyimide (PEI) composites based on 1,4-(3,4-discarboxyphenoxyl)benzene/4,4'- methylene dianiline have been fabricated by the approach of polymerization by the approach of polymerization of monomer reactants (PMR). The chemical and physical behavior of the resin during processing are determined by infrared spectroscopy and rheology. The influence of processing conditions on the composite properties is investigated. The processing, physical and mechanical properties of the composites reinforced with different fibers are presented.

Structure/permeability and permselectivity relationship of polyetherimides from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride .3.

Gas permeability coefficients of a series of aromatic polyetherimides prepared from 1,4-bis(3,4-dicarboxyphenoxy) benzene dianhydride (HQDPA) and four (methylene dianiline)s with a methyl side group to H-2, CO2, O-2, N-2, and CH4 were measured under 7 atm and within a temperature range from 30 to 150 degrees C. The gas permeabilities and permselectivities of these polymers were compared with those of the HQDPA-based polyetherimides from methylene dianiline (MDA) and isopropylidene dianiline (IPDA). The number and position of the methyl side groups on the benzene rings of the diamine residues strongly affect the gas permeabilities and permselectivities of the HQDPA-based polyetherimides. The gas permeability of the polyetherimide progressively increases with an increase in the number of the methyl side groups. Both the gas permeability and permselectivity of the polyetherimides with methyl side groups are higher than those of HQDPA-MDA. The polyetherimide prepared from 3,3'-dimethyl 4,4'-methylene dianiline (DMMDA1) possesses both higher permeability and permselectivity than the polyetherimides prepared from 2,2'-dimethyl 4,4'-methylene dianiline (DMMDA2). However, two of the polyetherimides prepared 2,2',3,3'-tetramethyl 4,4'-methylene dianiline (TMMDA1) or 2,2', 5,5'-tetramethyl 4,4'-methylene dianiline (TMMDA2) possess almost the same gas permeability and permselectivity.

DICHLORO(ETA(5)-CYCLOPENTADIENYL)([1-(4-METHOXYPHENYL)CYCLOHEXYL]-ETA(5)-CYCLOPENTADIENYL)TITANIUM(IV)

The title molecule, [TiCl2(C5H5)(C18H21O)], has a pseudotetrahedral bent metallocene structure in which the cyclopentadienyl ring is symmetrically bonded to Ti [range of Ti-C distances 2.36(1)-2.41(1)Angstrom], but the substituted cyclopentadienyl ring adopts asymmetrical bonding [Ti-C 2.33(1)-2.48(1)Angstrom] due to the interaction of the large substituent with the Cl(2) atom. The angle C(11)-C(1)-C(21) is 111.1(8)degrees with the large substituent occupying a cis position with respect to the substituted ring.

LANTHANIDE PERCHLORATE COMPLEXES OF 1,4-BIS(PHENYLSULFINYL)BUTANE

Seven trivalent lanthanide perchlorate complexes of the types [Ln(bphab)(4)ClO4] (ClO4)2 (where La = La(III), Pr(III), Nd(III) and Eu(III)) and [Ln(bphab)(3)ClO4] (ClO4)(2) (where Ln = Ho(III), Er(III) and Lu(III), and bphab = 1,4-bis(phenylsulfinyl)butane) have been synthesized by the reaction of bphsb with lanthanide(III) perchlorate in methanol-chloroform mixture. The complexes have been characterized by elemental analyses, molar conductance, electronic and infrared spectral techniques. Several bonding parameters have been calculated from the absorption spectra of the Pr(III), Nd(III), Ho(III) and Er(III) complexes. Infrared spectral data suggest that bphsb acts as bidentate ligand coordinating through the oxygen atoms of the S=O moieties.

裂解色谱法测定环化顺1,4聚丁二烯的环化度

用裂解色谱法(PGC)研究了不同环化度的环化顺1,4聚丁二烯(CPBd)。建立了测定CPBd环化度的方法。分析了不同实验条件下生成的CPBd的环化度,结果与NMR测定值一致。

异丙基磷酸单(1-已基-4-乙基)辛酯萃取分离锆、钍、钛、铁、镥及其机理

本文通过异丙基膦酸单(1-己基-4-乙基)辛酯在硫酸介质中对Zr~(4+)、Th~(4+)、Ti~(4+)、Fe~(3+)、Lu~(3-)的萃取平衡研究,探讨了Zr~(4-)与其它离子分离的可能性,提出了萃取Zr~(4-)的三种反应机理,并计算了萃取反应平衡常数和热力学函数.

La_(n+1)Ni_nO_(3n+1)(n=1～4)复合氧化物的制备、表征和催化性能的研究

合成了(AO)(ABO_3)_n(A=La,B=Ni,n=l～4)型系列复合氧化物.用XRD,XPS,IR,TPD,TPR等方法对其进行了表征,研究了结构特征,氧化一还原性能.用化学分析方法测定了镍的价态及氧缺陷.考察了该系列复合氧化物对CO,CH_4的完全氧化活性,并对其活性与化学组成及结构间的关系进行了讨论.

异丙基膦酸单（1－己基－4－乙基）辛酯与HPMBP协同萃取稀土元素（Ⅲ）

异丙基膦酸单（１－己基－４－乙基）辛酯与ＨＰＭＢＰ协同萃取稀土元素（Ⅲ）孙静，郑重，李德谦（中国科学院长春应用化学研究所稀土化学与物理开放实验室长春１３００２２）叶伟贞（中国科学院上海有机化学研究所上海）关键词异丙基膦酸单（１－己基－４－乙基）辛酯，...

1，4－二羟基蒽醌与稀土离子的配位聚合物制备和性质

制备了三价稀土离子Ｌｎ￣（３＋）（Ｌｎ＝Ｌａ，Ｃｅ，Ｐｒ，Ｎｂ，Ｓｍ，Ｅｕ，Ｇｄ，Ｔｂ，Ｄｙ和Ｙ）与１，４－二羟基蒽醌的配位聚合物。考察了这些配合物的热稳定性、磁性、导电性和红外光谱。

环化顺1，4－聚丁二烯浓溶液的流动行为

大多数线型高聚物浓溶液的流动行为呈现非牛顿性，线型顺１，４－聚丁二烯（ＬＢＲ）亦然，而环化顺１，４－聚丁烯（ＣＢＲ）的浓溶液在浓度达１７．８％时仍表现为牛顿流体。ＣＢＲ溶液的临界缠结浓度明显地高于ＬＢＲ，ＣＢＲ分子链间的缠结效应比ＬＢＲ弱得多，这是ＣＢＲ的分子链结构特征所致。

膦酸酯稀土催化体系高顺－1，4－聚丁二烯橡胶的充油效应及充油橡胶的性能

以芳烃含量约３８％的油品作填充油，对用膦酸酯（２－乙基己基膦酸单２－乙基己酯）稀土催化体系合成的高顺－１，４－聚丁二烯橡胶的充油效应及充油橡胶的性能进行了研究。结果表明，随着充油量的增加，充油生胶的可塑性增大，混炼行为和流动性得以改善，而屈服强度、拉伸强度和扯断伸长率均下降；充油硫化胶的３００％定伸应力、硬度、撕裂强度、回弹性、生热和磨耗等均降低，永久变形与抗湿滑性增加，拉伸强度大约在充油量为７０份时出现极大值。综合考虑，充油量以６０～７０份为宜。

镧系金属化合物催化苯乙烯和双烯烃的共聚──苯乙烯和异戊二烯共聚合制备高顺式－1，4嵌段共聚物

采用稀土催化体系Ｎｄ（Ｆ_３ＣＯ_２）_３－ＢｒＣ_５Ｈ_（１１）－Ｒ_ｍＡｌＨ_（３－ｍ）（Ｎｄ－Ｂｒ－Ａｌ），以甲苯为溶剂，在５０℃恒温水浴中进行苯乙烯（Ｓｔ）和异戊二烯（Ｉｐ）共聚合。结果表明，由Ａｌ（Ｏｃｔ）－３组成的催化体系可制备以顺式－１，４结构为主的共聚物；在后者组成的催化体系中，当Ａｌ／Ｎｄ＝５（摩尔比，下同），Ｂｒ／Ｎｄ＝５时，聚合活性最高。经ＩＲ，ＮＭＲ检测表征了共聚物的微观结构。同时，用π－烯丙基型配位机理和返扣配位机理对实验结果进行了定性解释。

异丙基膦酸单（1－已基－4－乙基）辛酯从硫酸介质中萃取分离钪、铁和镥

报道了异丙基膦酸单（１一已基一４一乙基）辛酯（ＰＴ一２）的正庚烷溶液在硫酸介质中对Ｓｃ３＋、Ｆｅ３＋、Ｌｕ３＋萃取平衡的影响，结果表明，通过控制酸度可以使三种元素分高。确定了Ｓｃ３＋的萃取机理，低酸度下为阳离子交换反应，高酸度下为溶剂化反应，中等酸度下两种反应并存。研究了饱和萃合物的ＩＲ、ＮＭＲ谱。讨论了温度对萃取平衡的影响，低酸度和高酸度下均为放热反应。