Heterogeneity in testing practices for infections during pregnancy: national survey across Switzerland.

QUESTION Detection and treatment of infections during pregnancy are important for both maternal and child health. The objective of this study was to describe testing practices and adherence to current national guidelines in Switzerland. METHODS We invited all registered practicing obstetricians and gynaecologists in Switzerland to complete an anonymous web-based questionnaire about strategies for testing for 14 infections during pregnancy. We conducted a descriptive analysis according to demographic characteristics. RESULTS Of 1138 invited clinicians, 537 (47.2%) responded and 520 (45.6%) were eligible as they are currently caring for pregnant women. Nearly all eligible respondents tested all pregnant women for group B streptococcus (98.0%), hepatitis B virus (HBV) (96.5%) and human immunodeficiency virus (HIV) (94.7%), in accordance with national guidelines. Although testing for toxoplasmosis is not recommended, 24.1% of respondents tested all women and 32.9% tested at the request of the patient. Hospital doctors were more likely not to test for toxoplasmosis than doctors working in private practice (odds ratio [OR] 2.52, 95% confidence interval [CI] 1.04-6.13, p = 0.04). Only 80.4% of respondents tested all women for syphilis. There were regional differences in testing for some infections. The proportion of clinicians testing all women for HIV, HBV and syphilis was lower in Eastern Switzerland and the Zurich region (69.4% and 61.2%, respectively) than in other regions (range 77.1-88.1%, p <0.001). Most respondents (74.5%) said they would appreciate national guidelines about testing for infections during pregnancy. CONCLUSIONS Testing practices for infections in pregnant women vary widely in Switzerland. More extensive national guidelines could improve consistency of testing practices.

Advantage of single-trial models for response to selection in wheat breeding multi-environment trials

An investigation was conducted to evaluate the impact of experimental designs and spatial analyses (single-trial models) of the response to selection for grain yield in the northern grains region of Australia (Queensland and northern New South Wales). Two sets of multi-environment experiments were considered. One set, based on 33 trials conducted from 1994 to 1996, was used to represent the testing system of the wheat breeding program and is referred to as the multi-environment trial (MET). The second set, based on 47 trials conducted from 1986 to 1993, sampled a more diverse set of years and management regimes and was used to represent the target population of environments (TPE). There were 18 genotypes in common between the MET and TPE sets of trials. From indirect selection theory, the phenotypic correlation coefficient between the MET and TPE single-trial adjusted genotype means [r(p(MT))] was used to determine the effect of the single-trial model on the expected indirect response to selection for grain yield in the TPE based on selection in the MET. Five single-trial models were considered: randomised complete block (RCB), incomplete block (IB), spatial analysis (SS), spatial analysis with a measurement error (SSM) and a combination of spatial analysis and experimental design information to identify the preferred (PF) model. Bootstrap-resampling methodology was used to construct multiple MET data sets, ranging in size from 2 to 20 environments per MET sample. The size and environmental composition of the MET and the single-trial model influenced the r(p(MT)). On average, the PF model resulted in a higher r(p(MT)) than the IB, SS and SSM models, which were in turn superior to the RCB model for MET sizes based on fewer than ten environments. For METs based on ten or more environments, the r(p(MT)) was similar for all single-trial models.

Genetic and economic analysis of a targeted marker-assisted wheat breeding strategy

The advent of molecular markers as a tool to aid selection has provided plant breeders with the opportunity to rapidly deliver superior genetic solutions to problems in agricultural production systems. However, a major constraint to the implementation of marker-assisted selection (MAS) in pragmatic breeding programs in the past has been the perceived high relative cost of MAS compared to conventional phenotypic selection. In this paper, computer simulation was used to design a genetically effective and economically efficient marker-assisted breeding strategy aimed at a specific outcome. Under investigation was a strategy involving the integration of both restricted backcrossing and doubled haploid (DH) technology. The point at which molecular markers are applied in a selection strategy can be critical to the effectiveness and cost efficiency of that strategy. The application of molecular markers was considered at three phases in the strategy: allele enrichment in the BC1F1 population, gene selection at the haploid stage and the selection for recurrent parent background of DHs prior to field testing. Overall, incorporating MAS at all three stages was the most effective, in terms of delivering a high frequency of desired outcomes and at combining the selected favourable rust resistance, end use quality and grain yield alleles. However, when costs were included in the model the combination of MAS at the BC1F1 and haploid stage was identified as the optimal strategy. A detailed economic analysis showed that incorporation of marker selection at these two stages not only increased genetic gain over the phenotypic alternative but actually reduced the over all cost by 40%.

The application of H controller synthesis to high speed independent drive systems

This thesis describes work completed on the application of H controller synthesis to the design of controllers for single axis high speed independent drive design examples. H controller synthesis was used in a single controller format and in a self-tuning regulator, a type of adaptive controller. Three types of industrial design examples were attempted using H controller synthesis, both in simulation and on a Drives Test Facility at Aston University. The results were benchmarked against a Proportional, Integral and Derivative (PID) with velocity feedforward controller (VFF), the industrial standard for this application. An analysis of the differences between a H and PID with VFF controller was completed. A direct-form H controller was determined for a limited class of weighting function and plants which shows the relationship between the weighting function, nominal plant and the controller parameters. The direct-form controller was utilised in two ways. Firstly it allowed the production of simple guidelines for the industrial design of H controllers. Secondly it was used as the controller modifier in a self-tuning regulator (STR). The STR had a controller modification time (including nominal model parameter estimation) of 8ms. A Set-Point Gain Scheduling (SPGS) controller was developed and applied to an industrial design example. The applicability of each control strategy, PID with VFF, H, SPGS and STR, was investigated and a set of general guidelines for their use was determined. All controllers developed were implemented using standard industrial equipment.

Progress towards Elimination of HIV Mother-to-Child Transmission in the Dominican Republic from 1999 to 2011

In 1999, prevention of mother-to-child transmission (pMTCT) using antiretrovirals was introduced in the Dominican Republic (DR). Highly active antiretroviral therapy (HAART) was introduced for immunosuppressed persons in 2004 and for pMTCT in 2008. To assess progress towards MTCT elimination, data from requisitions for HIV nucleic acid amplification tests for diagnosis of HIV infection in perinatally exposed infants born in the DR from 1999 to 2011 were analyzed. The MTCT rate was 142/1,274 (11.1%) in 1999–2008 and 12/302 (4.0%) in 2009–2011 (), with a rate of 154/1,576 (9.8%) for both periods combined. This decline was associated with significant increases in the proportions of women who received prenatal HAART (from 12.3% to 67.9%) and infants who received exclusive formula feeding (from 76.3% to 86.1%) and declines in proportions of women who received no prenatal antiretrovirals (from 31.9% to 12.2%) or received only single-dose nevirapine (from 39.5% to 19.5%). In 2007, over 95% of DR pregnant women received prenatal care, HIV testing, and professionally attended delivery. However, only 58% of women in underserved sugarcane plantation communities (2007) and 76% in HIV sentinel surveillance hospitals (2003–2005) received their HIV test results. HIV-MTCT elimination is feasible but persistent lack of access to critical pMTCT measures must be addressed.

Mercury content and isotopic composition of frost flower, surface snow and brine samples near Barrow, Alaska

Frost flowers are ice crystals that grow on refreezing sea ice leads in Polar Regions by wicking brine from the sea ice surface and accumulating vapor phase condensate. These crystals contain high concentrations of mercury (Hg) and are believed to be a source of reactive halogens, but their role in Hg cycling and impact on the fate of Hg deposited during atmospheric mercury depletion events (AMDEs) are not well understood. We collected frost flowers growing on refreezing sea ice near Barrow, Alaska (U.S.A.) during an AMDE in March 2009 and measured Hg concentrations and Hg stable isotope ratios in these samples to determine the origin of Hg associated with the crystals. We observed decreasing Delta199Hg values in the crystals as they grew from new wet frost flowers (mean Delta199Hg = 0.77 ± 0.13 per mil, 1 s.d.) to older dry frost flowers (mean Delta199Hg = 0.10 ± 0.05 per mil, 1 s.d.). Over the same time period, mean Hg concentrations in these samples increased from 131 ± 6 ng/L (1 s.d.) to 180 ± 28 ng/L (1 s.d.). Coupled with a previous study of Hg isotopic fractionation during AMDEs, these results suggest that Hg initially deposited to the local snowpack was subsequently reemitted during photochemical reduction reactions and ultimately accumulated on the frost flowers. As a result of this process, frost flowers may lead to enhanced local retention of Hg deposited during AMDEs and may increase Hg loading to the Arctic Ocean.

Sea ice thickness distribution (ITD) Model for the Arctic, links to NetCDF files

Sea ice models contain many different parameterizations of which one of the most commonly used is a subgrid-scale ice thickness distribution (ITD). The effect of this model component and the associated ice strength formulation on the reproduction of observed Arctic sea ice is assessed. To this end the model's performance in reproducing satellite observations of sea ice concentration, thickness and drift is evaluated. For an unbiased comparison, different model configurations with and without an ITD are tuned with an automated parameter optimization. The original combination of ITD and ice strength parameterization does not lead to better results than a simple single category model. Yet changing to a simpler ice strength formulation, which depends linearly on the mean ice thickness across all thickness categories, allows to clearly improve the model-data misfit when using an ITD. In the original formulation, the ice strength depends strongly on the number of thickness categories, so that introducing more categories can lead to thicker albeit weaker ice on average.

Terrorismo, Yihadismo y Crimen Organizado en la Estrategia Global de Seguridad de la Unión Europea

El terrorismo es considerado en la Estrategia Global para la Política Exterior y de Seguridad de la UE como una de las principales amenazas a la seguridad de la Unión Europea. La lucha contra el terrorismo ha dado sus frutos en los últimos quince años, pero este artículo analiza la nueva Estrategia y se pregunta si será suficiente para responder con eficacia a esta amenaza y si se están empleando todos los medios necesarios para atajarla.

Gestengestützte Schema- und Datenexploration

Der Zugang zu Datenbanken über die universelle Abfragesprache SQL stellt für Nicht-Spezialisten eine große Herausforderung dar. Als eine benutzerfreundliche Alternative wurden daher seit den 1970er-Jahren unterschiedliche visuelle Abfragesprachen (Visual Query Languages, kurz VQLs) für klassische PCs erforscht. Ziel der vorliegenden Arbeit ist es, eine generische VQL zu entwickeln und zu erproben, die eine gestenbasierte Exploration von Datenbanken auf Schema- und Instanzdatenebene für mobile Endgeräte, insbesondere Tablets, ermöglicht. Dafür werden verschiedene Darstellungsformen, Abfragestrategien und visuelle Hints für Fremdschlüsselbeziehungen untersucht, die den Benutzer bei der Navigation durch die Daten unterstützen. Im Rahmen einer Anforderungsanalyse erwies sich die Visualisierung der Daten und Beziehungen mittels einer platzsparenden geschachtelten NF2-Darstellung als besonders vorteilhaft. Zur Steuerung der Datenbankexploration wird eine geeignete Gestensprache, bestehend aus Stroke-, Multitouch- und Mid-Air-Gesten, vorgestellt. Das Gesamtkonzept aus Darstellung und Gestensteuerung wurde anhand des im Rahmen dieser Arbeit entwickelten GBXT-Prototyps auf seine reale Umsetzbarkeit hin, als plattformunabhängige Single-Page-Application für verschiedene mobile Endgeräte mittels JavaScript und HTML5/CSS3 untersucht.

Adsorption Calorimetry for Energy Conversion Technologies: Applications in Organic Photovoltaics, Catalysis, and Atomic Layer Deposition

Thesis (Ph.D.)--University of Washington, 2016-07

Helping you to make the right choice for your web filtering

We have designed this flowchart to help you choose the web filtering option that best suits your needs from three different options: Our free standard web filtering service, enhanced user based filtering or a solution from our framework agreement.

Efficiency of chitosan and their combination with bentonite as retention aids in papermaking

In a previous work (Nicu et al. 2013), the flocculation efficiency of three chitosans differing by molecular weight and charge density were evaluated for their potential use as wet end additives in papermaking. According to the promising results obtained, chitosan (single system) and its combination with bentonite (dual system) were evaluated as retention aids, and their efficiency was compared with poly(diallyl dimethyl ammonium chloride) (PDADMAC) and polyethylenimine (PEI). In single systems, chitosan was clearly more efficient in drainage rate than PDADMAC and PEI, especially those with the lowest molecular weights; however, retention is considerably lower. This drawback can be overcome by using dual systems with anionic bentonite microparticles, with the optimum ratio of polymer:bentonite being 1:4 (wt./wt.). In dual systems, the differences in retention were almost negligible, and the difference in drainage rate was even higher, together with better floc reversibility. The most efficient chitosan in single systems was Ch.MMW, while Ch.LMW was the most efficient in dual systems. The flocculation mechanism of chitosan was a combination of patch formation, charge neutralization, and partial bridge formation, and the predominant mechanism depended on the molecular weight and charge density of the chitosan.

Nitrogen use efficiency and optimization of nitrogen fertilizer application for stable yields and high quality of cereals grown in conservation agriculture

In most agroecosystems, nitrogen (N) is the most important nutrient limiting plant growth. One management strategy that affects N cycling and N use efficiency (NUE) is conservation agriculture (CA), an agricultural system based on a combination of minimum tillage, crop residue retention and crop rotation. Available results on the optimization of NUE in CA are inconsistent and studies that cover all three components of CA are scarce. Presently, CA is promoted in the Yaqui Valley in Northern Mexico, the country´s major wheat-producing area in which from 1968 to 1995, fertilizer application rates for the cultivation of irrigated durum wheat (Triticum durum L.) at 6 t ha-1 increased from 80 to 250 kg ha-1, demonstrating the high intensification potential in this region. Given major knowledge gaps on N availability in CA this thesis summarizes the current knowledge of N management in CA and provides insights in the effects of tillage practice, residue management and crop rotation on wheat grain quality and N cycling. Major aims of the study were to identify N fertilizer application strategies that improve N use efficiency and reduce N immobilization in CA with the ultimate goal to stabilize cereal yields, maintain grain quality, minimize N losses into the environment and reduce farmers’ input costs. Soil physical and chemical properties in CA were measured and compared with those in conventional systems and permanent beds with residue burning focusing on their relationship to plant N uptake and N cycling in the soil and how they are affected by tillage and N fertilizer timing, method and doses. For N fertilizer management, we analyzed how placement, time and amount of N fertilizer influenced yield and quality parameters of durum and bread wheat in CA systems. Overall, grain quality parameters, in particular grain protein concentration decreased with zero-tillage and increasing amount of residues left on the field compared with conventional systems. The second part of the dissertation provides an overview of applied methodologies to measure NUE and its components. We evaluated the methodology of ion exchange resin cartridges under irrigated, intensive agricultural cropping systems on Vertisols to measure nitrate leaching losses which through drainage channels ultimately end up in the Sea of Cortez where they lead to algae blooming. A throughout analysis of N inputs and outputs was conducted to calculate N balances in three different tillage-straw systems. As fertilizer inputs are high, N balances were positive in all treatments indicating the risk of N leaching or volatilization during or in subsequent cropping seasons and during heavy rain fall in summer. Contrary to common belief, we did not find negative effects of residue burning on soil nutrient status, yield or N uptake. A labeled fertilizer experiment with urea 15N was implemented in micro-plots to measure N fertilizer recovery and the effects of residual fertilizer N in the soil from summer maize on the following winter crop wheat. Obtained N fertilizer recovery rates for maize grain were with an average of 11% very low for all treatments.

Factores asociados a mortalidad en pacientes con enfermedades autoinmunes en cuidado intensivo, Hospital de la Samaritana 2007-2013

Introducción y objetivos: Las enfermedades autoinmunes en cuidado intensivo están relacionadas con tasas de mortalidad elevadas. El propósito del presente estudio fue buscar factores asociados a mortalidad en estos pacientes. Materiales y métodos: estudio observacional de casos incidentes, retrospectivo, en base a revisión de historias clínicas de los pacientes que ingresaron a la unidad de cuidado intensivo del Hospital Universitario de la Samaritana; se recolecto un total de 68 eventos con los que se evaluó la relación de las variables estudiadas con mortalidad. Resultados: Las enfermedades autoinmunes se presentan más frecuentemente en mujeres (66%), el lupus eritematoso sistémico fue la afección reumatológica más común (36%), el promedio de edad fue de 46 años, la media de días en ventilación mecánica fue de 10 (desviación estándar 13 días), el valor del APACHE promedio fue de 19 puntos, el sistema orgánico más afectado fue el renal (58,5%) y la mortalidad global fue de 40%. Se encontró asociación estadísticamente significativa con cinco variables: presencia de shock al ingreso a UCI OR: 7,368 (IC95% 1,886-28,794); nivel de procalcitonina mayor a 10 OR: 5,231 (IC95% 1,724-15,869); complemento C3 consumido OR: 4,014 (IC95% 1,223-13,173); serositis en la radiografía de tórax OR: 3,771 (IC95% 1,238-11,492); recuento de plaquetas menor a 100.000 OR: 3,33 (IC95%: 1,037-10,714). Conclusión: Existen factores que pueden estar asociados con mortalidad en pacientes con enfermedades autoinmunes en cuidado intensivo, su detección temprana y manejo oportuno podría mejorar el pronóstico de estos pacientes.

El rol de la Unión Africana (UA) en el Cuerno de África a partir del caso de Somalia - AMISOM (2007-2013)

El propósito de esta monografía es comprender cuál ha sido el rol de la Unión Africana (UA), dentro de la misión de paz AMISOM en el periodo de 2007- 2013. Por ello, el trabajo abarca aspectos geopolíticos e históricos, que han influido en la configuración del conflicto armado de Somalía y que han llevado progresivamente a la creación, evolución e implementación de mecanismos como las misiones de paz. Además, se abarcan los planteamientos del neo-funcionalismo y el neo-regionalismo para comprender las estructuras y las dinámicas propias de la UA y así, comprender la naturaleza tanto de sus acciones, como de sus propósitos; propósitos que aclaman el fomento del panafricanismo. Desde aquí se puede entender como su rol ha contribuido con el crecimiento del mercado de la industria militar en la región, a costa de la responsabilidad de proteger. Por último, se concluye que dichas dinámicas han llevado a la creación de comunidades de inseguridad.