The Kent estuary 1992 surveys. Summary of results

This is the Kent estuary 1992 surveys: Summary of results produced by the National Rivers Authority in 1993. The report summarises routine and baseline water quality surveys carried out on the Kent estuary during 1992. Baseline surveys are designed to respond to regional, national, and European requirements. During 1992 baseline surveys were carried out in June and December. Unfortunately, in June, samples could only be taken from stations 3, 7 and 8. For ease of interpretation the results have been presented in graph form, including the maximum and minimum parameter concentration and the appropriate Environmental Quality Standards (EQS). The parameters measured in this survey were physical parameters (temperature, BOD, dissolved oxygen, Ph, salinity, conductivity); nutrients (ammonia, phosphate, and nitrate); metals (Mercury, Nickel, Arsenic, Cadmium, Chromium, Cooper, Boron, and Zinc) and organic compounds.

Niche measures and feeding strategies of Barbodes gonionotus Bleeker and Oreochromis spp. from a ricefield in Bangladesh

Intra-and interspecific virtual niche measures and feeding strategies of Barbodes gonionotus and Oreochromis spp. were studied from a rice field in Bangladesh. Appropriateness and ease of interpretation of different indices were evaluated. Small sizes of both species had a relatively wider dietary breadth and used many of the resource categories available to them than the large size groups, though none were generalist feeder. The dietary overlap of large B. gonionotus on the small was greater than the reverse, but biologically insignificant. While the dietary overlap of large Oreochromis spp. on the small was significantly greater. Interspecific dietary width was relatively broader for B. gonionotus than Oreochromis spp. and overlap of B. gonionotus on Oreochromis spp. was significantly greater than the reverse. Evidence of significant intraspecific dietary overlap between the two sizes of tilapia reflects strong competition and cautions for mixed-size stocking in rice-fish system. Besides, there seem fewer opportunities for habitat segregation between B. gonionotus and Oreochromis spp., due to the significant interspecific dietary overlap of the former on the latter in rice-fish system. Tilapia specialized on periphytic detrital aggregate while silver barb tended to consume aquatic macrophytes and molluscs. Small sizes of B. gonionotus should be preferred for rice-fish integration over the Oreochromis spp. due to their broader niche width and pronounced ontogenetic dietary shifts with the aging of the stock.

Feedback control and the arrow of time

The purpose of this paper is to highlight the central role that the time asymmetry of stability plays in feedback control. We show that this provides a new perspective on the use of doubly-infinite or semi-infinite time axes for signal spaces in control theory. We then focus on the implication of this time asymmetry in modeling uncertainty, regulation and robust control. We point out that modeling uncertainty and the ease of control depend critically on the direction of time. We finally discuss the relationship of this control-based time arrow with the well-known arrows of time in physics. © 2008 IEEE.

Report of the baseline survey undertaken on the Chinese cage site in Napoleon Gulf, Northern Lake Victoria, 12 March 2012

The government of the People's Republic of China through a 2007 agreement with the Government of the Republic of Uganda, has establishment of an Agricultural Technology Demonstration Center (ATDC). The first phase covering the building of aquaculture infrastructure at Kajjansi ARDC is complete and the second operation phase has started in which facilities for cage culture have been set up in the Napoleon gulf, northern Lake Victoria near Jinja. The cage facility is aimed at boosting fish farming within the lake as a diversification to the traditional pond fish culture technology. NaFIRRI scientists as well as Chinese experts undertook a baseline survey in the chosen cage site on 12 March 2012. The survey covered determination of water depth, water transparency, measurement of selected physical-chemical parameters (temperature,dissolved oxygen, conductivity and pH; determination of the nutrient status and study of algae, invertebrate and fish communities at the site. Materials and methodologies used in the survey were based on the Standard Operating Procedures (SOPs) of NaFIRRI. The study area was divided into three study sites. Site 1 (upstream) was at 8.9 metre depth while site 2 (proposed cage site) and site 3 (downstream) were 6 and 4.3 metres deep respectively. Water transparency was lowest at site 1 (1.58 m) and highest at site 3 (1.64 m). Dissolved oxygen at the three sites ranged from 6.0 to 8 mg/I. Water temperature profiles fluctuated within narrow limits between 26.5 and 27.5 DC. Measurements of pH were between 7 (neutral) and 8 (alkaline) while electrical conductivity was between 98 and 101 uS/em. These observed physical-chemical parameters at the study site were considered suitable for cage fish rearing purposes. Nitrite-nitrogen levels varied within narrow limits from 0.043 to 0.0453 mgtl. Similarly, Ammonia-nitrogen varied between 0.015 and 0.0185 mg/1. Soluble reactive phosphorus (SRP) level was highest at site 3 (O.012mgll) compared to that at sites 1 and 2 (0.009mgll). Total suspended solids (TSS) were higher at site 1 (83.3mgll), thereafter decreasing to lower levels at sites 2 (24.8mgtl) and 3 (19.8mgl) respectively. The nutrient level results observed here all fall below the maximum permissible limits by NEMA and therefore the site is recommended for cage culture The algal community was constituted by four major groups: Blue greens,Greens, Cryptophytes, and Diatoms with blue greens as the common and dominant group. High algal biomass (19944961 ugtL) of the dominant blue green algae was observed at site 1 compared site 2 and 3 (58655.2 & 27487. 7 ugtL) respectively. Occurrence of toxicin producing algae: microsytis and cylindrospermopsis in the proposed cage area was considered to be of not much significance as their concentrations were below harmful levels. However, monitoring their presence, biomass and seasonality will be critical in order to follow when and where they occur and at what time of the year for ease of management of the cages

A comparison of four sustainable manufacturing strategies

Effective use of materials is one possible component of a sustainable manufacturing strategy. There are many such strategies proposed in the literature and used in practice, with confusion over what they are, what the differences among them may be and how they can be used by practitioners in design and manufacture to improve the sustainability of their product and processes. This paper reviews the literature on sustainable manufacturing strategies that deliver improved material performance. Four primary strategies were found: waste minimisation; material efficiency; resource efficiency; and eco-efficiency. The literature was analysed to determine the key characteristics of these sustainable manufacturing strategies and 17 characteristics were found. The four strategies were then compared and contrasted against all the characteristics. While current literature often uses these strategy titles in a confusing, occasionally inter-changeable manner, this study attempts to create clear separation between them. Definition, scope and practicality of measurement are shown to be key characteristics that impact upon the ability of manufacturing companies to make effective use of the proposed strategy. It is observed that the most actionable strategies may not include all of the dimensions of interest to a manufacturer wishing to become more sustainable, creating a dilemma between ease of implementation and breadth of impact. © 2008 Taylor & Francis.

Imaging the failure of a rock-fill dam following liquefaction

Rock-fill dams are popular in developing countries due to their ease of construction and use of local materials. They are used to store water and to provide flood defences. The presence of such dams in earthquake-prone regions poses risks, particularly from ground liquefaction. In this paper, results from physical model tests on dams with different configurations are presented. Model dams with impermeable cores including sheet pile walls and clay cores were tested and the effect of reservoir water was investigated. High-speed photography was used to capture the response of the model dams allowing the movement of foundation soil below the dam to be established. It is concluded that the stiffness of the impermeable core has a significant influence on the ultimate deformation of the dam. The presence of reservoir water led to increased downstream movements of the dam and differential settlements between the upstream and downstream sides.

High performance transistors based on the controlled growth of triisopropylsilylethynyl-pentacene crystals via non-isotropic solvent evaporation

Triisopropylsilylethynyl-pentacene (TIPS-PEN) has proven to be one of the most promising small molecules in the field of molecular electronics, due to its unique features in terms of stability, performance and ease of processing. Among a wide variety of well-established techniques for the deposition of TIPS-PEN, blade-metered methods have recently gained great interest towards the formation of uniform crystalline films over a large area. Following this rationale, we herein designed a versatile approach based on blade-coating, which overcomes the problem of anisotropic crystal formation by manipulating the solvent evaporation behaviour, in a way that brings about a preferential degree of crystal orientation. The applicability of this method was evaluated by fabricating field-effect transistors on glass as well as on silicon dioxide/silicon (SiO2/Si) substrates. Interestingly, in an attempt to improve the rheological and wetting behaviour of the liquid films on the SiO2/Si substrates, we introduced a polymeric interlayer of polystyrene (PS) or polymethylmethacrylate (PMMA) which concurrently acts as passivation and crystallization assisting layer. In this case, the synergistic effects of the highly-ordered crystalline structure and the oxide surface modification were thoroughly investigated. The overall performance of the fabricated devices revealed excellent electrical characteristics, with high saturation mobilities up to 0.72 cm2 V-1 s-1 (on glass with polymeric dielectric), on/off current ratio >104 and low threshold voltage values (<-5 V). This journal is © the Partner Organisations 2014.

Rapid detection of porcine circovirus type 2 by loop-mediated isothermal amplification

A method of loop-mediated isothermal amplification (LAMP) was employed to develop a rapid and simple detection system for porcine circovirus type 2 (PCV2). The amplification could be finished in 60 min under isothermal condition at 64 degrees C by employing a set of four primers targeting the cap gene of PCV2. The LAMP assay showed higher sensitivity than the conventional PCR, with a detection limit of five copies per tube of purified PCV2 genomic DNA. No cross-reactivity was observed from the samples of other related viruses including porcine circovirus type 1 (PCV1), porcine parvovirus (PPV), porcine pseudorabies virus (PRV) and porcine reproductive and respiratory syndrome virus (PRRSV). The detection rate of PCV2 LAMP for 86 clinical samples was 96.5% and appeared greater than that of the PCR method. The LAMP assay reported can provide a rapid yet simple test of PCV2 suitable for laboratory diagnosis and pen-side detection due to ease of operation and the requirement of only a regular water bath or heat block for the reaction. (c) 2008 Elsevier B.V. All rights reserved.

Effect of ancillary ligands on the properties of heteroleptic green iridium dendrimers functionalized with carbazole dendrons

A series of heteroleptic green iridium dendrimers functionalized with carbazole dendrons, such as G2(pic) and G2(acac), have been synthesized, in which picolinic acid and acetylacetone are used as the ancillary ligands, respectively. Compared with the corresponding homoleptic iridium dendrimer G2 (8%), these heteroleptic ones can be prepared under mild conditions with total yields as high as 55-67%. Both the dendrimer G2(pic) and G2(acac) display bright green emissions with photoluminescence quantum yields higher than 0.80 in toluene solution. As a result, a maximum external quantum efficiency of 7.1% (21.0 cd/A) for G2(pic) and 7.7% (25.8 cd/A) for G2(acac) has been realized based on non-doped device configuration. The state-of-art performance indicates that the heteroleptic dendrimers can be promising candidates used for non-doped electrophosphorescent devices, especially when the ease of synthesis in a large scale is considered.

Evaluation of a sol-gel derived carbon composite electrode as an amperometric detector for capillary electrophoresis

In this paper, we report the construction and application of a sol-gel derived carbon composite electrode (CCE) as an amperometric detector for capillary electrophoresis. The electrochemical properties were characterized and compared with those of conventional carbon fiber and carbon paste electrode (CPE). Experimental results show that peak-to-peak noise of CCE was about 20% of CPE and electrode capacitance was comparatively low. When applied to the detection of dopamine and epinephrine, the optimal detection potential for CCE was 0.1 V lower than CPE under the same separation conditions; CCE with diameter of 75 and 100 mum could achieve a low detection limit of 3.10(-8) and 6.10(-8) M for the detection of epinephrine, which approaching that of the 33-mum diameter carbon fiber electrode. Also, the linearity for epinephrine at CCE was more than two orders of magnitude, which was slightly wider than that of carbon fiber electrode. Applications to real sample analysis were tested by the determination of betahistine dihydrochloride in tablets and human urine. Using CCE with diameter less than or equal to100 mum as an amperometric detector after capillary electrophoresis separation, a low detection limit and a wide linear range combined with excellent reproducibility were obtained. This CCE possesses of many advantages, namely, convenience, ease of fabrication, low cost and high stability.

CRYSTAL-STRUCTURE AND THERMODYNAMIC PARAMETERS OF NYLON-1010

WAXD, SAXS, FTIR, DSC and density techniques have been used to investigate the crystal structure, crystal density rho(c), amorphous density rho(a), equilibrium heat of fusion DELTAH(m)degrees and equilibrium melting temperature T(m)degrees. By extrapolating the straight lines in the FTIR absorbance against density plot to zero intensity, rho(c) and rho(a) were estimated to be 1.098 and 1.003 g/cm3 respectively. The rho(c) obtained was too low in value. From X-ray diffraction patterns of uniaxially oriented fibres, the crystal structure of Nylon-1010 was determined. The Nylon-1010 crystallized in the triclinic system, with lattice dimensions: a = 4.9 angstrom, b = 5.4 angstrom, c = 27.8 angstrom, alpha = 49-degrees, beta = 77-degrees, gamma = 63.5-degrees. The unit cell contained one monomeric unit, the space group was P1BAR, and the correct value of rho(c) was 1.135 g/cm3. The degree of crystallinity of the polymer was determined as about 60% (at RT) using Ruland's method. SAXS has been used to investigate the crystalline lamellar thickness, long period, transition zone, the specific inner surface and the electron density difference between the crystalline and amorphous regions for Nylon-1010. The analysis of data was based upon a one-dimensional electron-density correlation function. DELTAH(m)degrees was estimated to be 244.0 J/g by extrapolation of DELTAH(m)degrees in the plot of heat of fusion against specific volume of semicrystalline specimens to the completely crystalline condition (V(sp)c = 1/rho(c)). Owing to the ease of recrystallization of melt-crystallized Nylon-1010 specimens, the well-known Hoffman's T(m)-T(c) method failed in determining T(m)degrees and a Kamide double extrapolation method was adopted. The T(m)degrees value so obtained was 487 K.

Analysis of primary aromatic amines using precolumn derivatization by HPLC fluorescence detection and online MS identification

2-(2-Phenyl-1H-phenanthro-[9,10-d]imidazole-1-yl)-acetic acid (PPIA) and 2-(9-acridone)-acetic acid (AAA), two novel precolumn fluorescent derivatization reagents, have been developed and compared for analysis of primary aromatic amines by high performance liquid chromatographic fluorescence detection coupled with online mass spectrometric identification. PPIA and AAA react rapidly and smoothly with the aromatic amines on the basis of a condensation reaction using 1-ethyl-3-(3dimethylaminopropyl)-carbodiimide (EDC) as dehydrating catalyst to form stable derivatives with emission wavelengths at 380 and 440 nm, respectively. Taking six primary aromatic amines (aniline, 2-methylaniline, 2-methoxyaniline, 4-methylaniline, 4-chloroaniline, and 4-bromoaniline) as testing compounds, derivatization conditions such as coupling reagent, basic catalyst, reaction temperature and time, reaction solvent, and fluorescent labeling reagent concentration have also been investigated. With the better PPIA method, chromatographic separation of derivatized aromatic amines exhibited a good baseline resolution on an RP column. At the same time, by online mass spectrometric identification with atmospheric pressure chemical ionization (APCI) source in positive ion mode, the PPIA-labeled derivatives were characterized by easy-to-interpret mass spectra due to the prominent protonated molecular ion m/z [M + H](+) and specific fragment ions (MS/MS) m/z 335 and 295. The linear range is 24.41 fmol-200.0 pmol with correlation coefficients in the range of 0.9996-0.9999, and detection limits of PPIA-labeled aromatic amines are 0.12-0.21 nmol/L (S/N = 3). Method repeatability, precision, and recovery were evaluated and the results were excellent for the efficient HPLC analysis. The most important argument, however, was the high sensitivity and ease-of-handling of the PPIA method. Preliminary experiments with wastewater samples collected from the waterspout of a paper mill and its nearby soil where pollution with aromatic amines may be expected show that the method is highly validated with little interference in the chromatogram.

An analysis of manufacturing simulation software.

As a management tool Similation Software deserves greater analysis from both an academic and industrial viewpoint. A comparative study of three packages was carried out from a 'first time' use approach. This allowed the ease of use and package features to be assessed using a simple theoretical benchmark manufacturing process. To back the use of these packages an objective survey on simulation use and package features was carried out within the manufacturing industry.This identified the use of simulation software, its' applicability and preception of user requirements thereby proposing an ideal package.

Who has the Right to Govern Online Activity? A Criminal and Civil Point of View

Kohl, U. (2004). Who has the right to govern online activity? A criminal and civil point of view. International Review of Law, Computers & Technology 18 (3), 387-410 RAE2008

The conversion of the Maoris, by Donald MacDougall

http://www.archive.org/details/conversionmaoris00macduoft