Quantifying sediment storage in a high Alpine valley (Turtmanntal, Switzerland)

The determination of sediment storage is a critical parameter in sediment budget analyses. But, in many sediment budget studies the quantification of magnitude and time-scale of sediment storage is still the weakest part and often relies on crude estimations only, especially in large drainage basins (>100km2). We present a new approach to storage quantification in a meso-scale alpine catchment of the Swiss Alps (Turtmann Valley, 110km2). The quantification of depositional volumes was performed by combining geophysical surveys and geographic information system (GIS) modelling techniques. Mean thickness values of each landform type calculated from these data was used to estimate the sediment volume in the hanging valleys and the trough slopes. Sediment volume of the remaining subsystems was determined by modelling an assumed parabolic bedrock surface using digital elevation model (DEM) data. A total sediment volume of 781·3×106?1005·7×106m3 is deposited in the Turtmann Valley. Over 60% of this volume is stored in the 13 hanging valleys. Moraine landforms contain over 60% of the deposits in the hanging valleys followed by sediment stored on slopes (20%) and rock glaciers (15%). For the first time, a detailed quantification of different storage types was achieved in a catchment of this size. Sediment volumes have been used to calculate mean denudation rates for the different processes ranging from 0·1 to 2·6mm/a based on a time span of 10ka. As the quantification approach includes a number of assumptions and various sources of error the values given represent the order of magnitude of sediment storage that has to be expected in a catchment of this size.

Prediction of soil orders with high spatial resolution: response of different classifiers to sampling density

The objective of this work was to evaluate sampling density on the prediction accuracy of soil orders, with high spatial resolution, in a viticultural zone of Serra Gaúcha, Southern Brazil. A digital elevation model (DEM), a cartographic base, a conventional soil map, and the Idrisi software were used. Seven predictor variables were calculated and read along with soil classes in randomly distributed points, with sampling densities of 0.5, 1, 1.5, 2, and 4 points per hectare. Data were used to train a decision tree (Gini) and three artificial neural networks: adaptive resonance theory, fuzzy ARTMap; self‑organizing map, SOM; and multi‑layer perceptron, MLP. Estimated maps were compared with the conventional soil map to calculate omission and commission errors, overall accuracy, and quantity and allocation disagreement. The decision tree was less sensitive to sampling density and had the highest accuracy and consistence. The SOM was the less sensitive and most consistent network. The MLP had a critical minimum and showed high inconsistency, whereas fuzzy ARTMap was more sensitive and less accurate. Results indicate that sampling densities used in conventional soil surveys can serve as a reference to predict soil orders in Serra Gaúcha.

Viabilitat i rendiment d'un sistema d'informació geogràfica en dispositius mòbils per realitzar càlculs LCP en zona de muntanya sense connexió de xarxa

The aim of this research paper is to present a macroscopic study about the feasibility and the efficiency of mobile devices in computing Least-Cost Path (LCP). This kind of artifact must work in off-line mode and must allow to load data from a mountain zone like digital terrain models and meteorological data.The research strategy has two steps:- First of all, we need to identify the set of software components in order to implement them inside the IT artifact. This set of components should have to be able to do LCP calculations, visualize results and present a well adapted human interface. The main goal of this first steep is to demonstrate the feasibility of a mobile geographic information system by following the ¿Design & Creation¿ research strategy.- In a second time, the goal is to evaluate the reliability and usability of this IT artifact by an ¿Experiments¿ research approach. In this step we want to characterize the behavior of the artifact in terms of fidelity and LCP process speed. This evaluation will be carried out by some external users.During the reading of this paper, we will see that this kind of geographic information system (the IT artifact) has the minimal requirements needed to carry out LCP calculations in mobile devices although it has several limitations and constraints in terms of useability and reliability. We will point out qualitative and quantitative elements related to the IT artifact performances while doing this kind of computations.

Quantification of the relation between surface morphodynamics and subsurface sedimentological product in sandy braided rivers

This study uses digital elevation models and ground-penetrating radar to quantify the relation between the surface morphodynamics and subsurface sedimentology in the sandy braided South Saskatchewan River, Canada. A unique aspect of the methodology is that both digital elevation model and ground-penetrating radar data were collected from the same locations in 2004, 2005, 2006 and 2007, thus enabling the surface morphodynamics to be tied explicitly to the associated evolving depositional product. The occurrence of a large flood in 2005 also allowed the influence of discharge to be assessed with respect to the processproduct relationship. The data demonstrate that the morphology of the study reach evolved even during modest discharges, but more extensive erosion was caused by the large flood. In addition, the study reach was dominated by compound bars before the flood, but switched to being dominated by unit bars during and after the flood. The extent to which the subsurface deposits (the product') were modified by the surface morphodynamics (the process') was quantified using the changes in radar-facies recorded in sequential ground-penetrating radar surveys. These surveys reveal that during the large flood there was an increase in the proportion of facies associated with bar margin accretion and larger dunes. In subsequent years, these facies became truncated and replaced with facies associated with smaller dune sets. This analysis shows that unit bars generally become truncated more laterally than vertically and, thus, they lose the high-angle bar margin deposits and smaller scale bar-top deposits. In general, the only fragments that remain of the unit bars are dune sets, thus making identification of the original unit barform problematic. This novel data set has implications for what may ultimately become preserved in the rock record.

Viabilitat i rendiment d'un sistema d'informació geogràfica en dispositius mòbils per realitzar càlculs LCP en zona de muntanya sense connexió de xarxa

The aim of this research paper is to present a macroscopic study about the feasibility and the efficiency of mobile devices in computing least-cost path (LCP). This kind of artifact must work in off-line mode and must allow to load data from a mountain zone like digital terrain models and meteorological data.

3-D density structure and geological evolution of Stromboli volcano (Aeolian Islands, Italy) inferred from land-based and sea-surface gravity data

We present the first density model of Stromboli volcano (Aeolian Islands, Italy) obtained by simultaneously inverting land-based (543) and sea-surface (327) relative gravity data. Modern positioning technology, a 1 x 1 m digital elevation model, and a 15 x 15 m bathymetric model made it possible to obtain a detailed 3-D density model through an iteratively reweighted smoothness-constrained least-squares inversion that explained the land-based gravity data to 0.09 mGal and the sea-surface data to 5 mGal. Our inverse formulation avoids introducing any assumptions about density magnitudes. At 125 m depth from the land surface, the inferred mean density of the island is 2380 kg m(-3), with corresponding 2.5 and 97.5 percentiles of 2200 and 2530 kg m-3. This density range covers the rock densities of new and previously published samples of Paleostromboli I, Vancori, Neostromboli and San Bartolo lava flows. High-density anomalies in the central and southern part of the island can be related to two main degassing faults crossing the island (N41 and NM) that are interpreted as preferential regions of dyke intrusions. In addition, two low-density anomalies are found in the northeastern part and in the summit area of the island. These anomalies seem to be geographically related with past paroxysmal explosive phreato-magmatic events that have played important roles in the evolution of Stromboli Island by forming the Scari caldera and the Neostromboli crater, respectively. (C) 2014 Elsevier B.V. All rights reserved.

Spatial modeling techniques for mapping and characterization of acid sulfate soils

Acid sulfate (a.s.) soils constitute a major environmental issue. Severe ecological damage results from the considerable amounts of acidity and metals leached by these soils in the recipient watercourses. As even small hot spots may affect large areas of coastal waters, mapping represents a fundamental step in the management and mitigation of a.s. soil environmental risks (i.e. to target strategic areas). Traditional mapping in the field is time-consuming and therefore expensive. Additional more cost-effective techniques have, thus, to be developed in order to narrow down and define in detail the areas of interest. The primary aim of this thesis was to assess different spatial modeling techniques for a.s. soil mapping, and the characterization of soil properties relevant for a.s. soil environmental risk management, using all available data: soil and water samples, as well as datalayers (e.g. geological and geophysical). Different spatial modeling techniques were applied at catchment or regional scale. Two artificial neural networks were assessed on the Sirppujoki River catchment (c. 440 km2) located in southwestern Finland, while fuzzy logic was assessed on several areas along the Finnish coast. Quaternary geology, aerogeophysics and slope data (derived from a digital elevation model) were utilized as evidential datalayers. The methods also required the use of point datasets (i.e. soil profiles corresponding to known a.s. or non-a.s. soil occurrences) for training and/or validation within the modeling processes. Applying these methods, various maps were generated: probability maps for a.s. soil occurrence, as well as predictive maps for different soil properties (sulfur content, organic matter content and critical sulfide depth). The two assessed artificial neural networks (ANNs) demonstrated good classification abilities for a.s. soil probability mapping at catchment scale. Slightly better results were achieved using a Radial Basis Function (RBF) -based ANN than a Radial Basis Functional Link Net (RBFLN) method, narrowing down more accurately the most probable areas for a.s. soil occurrence and defining more properly the least probable areas. The RBF-based ANN also demonstrated promising results for the characterization of different soil properties in the most probable a.s. soil areas at catchment scale. Since a.s. soil areas constitute highly productive lands for agricultural purpose, the combination of a probability map with more specific soil property predictive maps offers a valuable toolset to more precisely target strategic areas for subsequent environmental risk management. Notably, the use of laser scanning (i.e. Light Detection And Ranging, LiDAR) data enabled a more precise definition of a.s. soil probability areas, as well as the soil property modeling classes for sulfur content and the critical sulfide depth. Given suitable training/validation points, ANNs can be trained to yield a more precise modeling of the occurrence of a.s. soils and their properties. By contrast, fuzzy logic represents a simple, fast and objective alternative to carry out preliminary surveys, at catchment or regional scale, in areas offering a limited amount of data. This method enables delimiting and prioritizing the most probable areas for a.s soil occurrence, which can be particularly useful in the field. Being easily transferable from area to area, fuzzy logic modeling can be carried out at regional scale. Mapping at this scale would be extremely time-consuming through manual assessment. The use of spatial modeling techniques enables the creation of valid and comparable maps, which represents an important development within the a.s. soil mapping process. The a.s. soil mapping was also assessed using water chemistry data for 24 different catchments along the Finnish coast (in all, covering c. 21,300 km2) which were mapped with different methods (i.e. conventional mapping, fuzzy logic and an artificial neural network). Two a.s. soil related indicators measured in the river water (sulfate content and sulfate/chloride ratio) were compared to the extent of the most probable areas for a.s. soils in the surveyed catchments. High sulfate contents and sulfate/chloride ratios measured in most of the rivers demonstrated the presence of a.s. soils in the corresponding catchments. The calculated extent of the most probable a.s. soil areas is supported by independent data on water chemistry, suggesting that the a.s. soil probability maps created with different methods are reliable and comparable.

Näin opetan lisäävää valmistusta ja 3D-tulostusta: Pohdintoja uuden teknologian opetuksesta ja koulutuksesta

Additive manufacturing (shortened as AM), or more commonly 3D printing, consists of wide variety of different modern manufacturing technologies. AM is based on direct printing of a digital 3D model to a final product which is fabricated adding material layer by layer. This is from where term additive manufacturing has its origin. It is not only material what is added, but it is also value, properties etc. which are added. AM enables production of different and even better products compared to conventional manufacturing technologies. An estimation of potential of additive manufacturing can be gathered by considering the potential of laser cutting, which is one of the most widely used modern manufacturing technologies. This technique has been used over 40 years, and whole market around this technology is at the moment c. four billion euros and yearly growth is around 10 %. One factor affecting this success of laser cutting is that laser cutting enables radical improvements to products made of flat sheet. AM and 3D printing will do the same for three dimensional parts. Laser devices, which are at the moment used in 3D printing, are globally at the moment only around 1% of all laser devices used in any fabrication technology, so even with a cautious estimate the potential growth of at least 100 % is coming in next few years. Role of education is very important, when this kind of modern technology is industrially implemented. When both generation entering to work life and also generation who has been a while in work life understands new technology, its potential and limitations, this is the point when also product design can be rethought Potential of product design is driving force for wide use of additive manufacturing and 3D printing. Utilization of additive manufacturing and 3D printing is also opportunity for Finland and Finnish industry. This technology can save Finnish manufacturing industry. This technique has stron potential, as Finland has traditionally strong industrial know-how and good ICT knowledge.

Caractérisation des occupations du sol en milieu urbain par imagerie radar

Cette étude vise à tester la pertinence des images RSO - de moyenne et de haute résolution - à la caractérisation des types d’occupation du sol en milieu urbain. Elle s’est basée sur des approches texturales à partir des statistiques de deuxième ordre. Plus spécifiquement, on recherche les paramètres de texture les plus pertinents pour discriminer les objets urbains. Il a été utilisé à cet égard des images Radarsat-1 en mode fin en polarisation HH et Radarsat-2 en mode fin en double et quadruple polarisation et en mode ultrafin en polarisation HH. Les occupations du sol recherchées étaient le bâti dense, le bâti de densité moyenne, le bâti de densité faible, le bâti industriel et institutionnel, la végétation de faible densité, la végétation dense et l’eau. Les neuf paramètres de textures analysés ont été regroupés, en familles selon leur définition mathématique. Les paramètres de ressemblance/dissemblance regroupent l’Homogénéité, le Contraste, la Similarité et la Dissimilarité. Les paramètres de désordre sont l’Entropie et le Deuxième Moment Angulaire. L’Écart-Type et la Corrélation sont des paramètres de dispersion et la Moyenne est une famille à part. Il ressort des expériences que certaines combinaisons de paramètres de texture provenant de familles différentes utilisés dans les classifications donnent de très bons résultants alors que d’autres associations de paramètres de texture de définition mathématiques proches génèrent de moins bons résultats. Par ailleurs on constate que si l’utilisation de plusieurs paramètres de texture améliore les classifications, la performance de celle-ci plafonne à partir de trois paramètres. Malgré la bonne performance de cette approche basée sur la complémentarité des paramètres de texture, des erreurs systématiques dues aux effets cardinaux subsistent sur les classifications. Pour pallier à ce problème, il a été développé un modèle de compensation radiométrique basé sur la section efficace radar (SER). Une simulation radar à partir du modèle numérique de surface du milieu a permis d'extraire les zones de rétrodiffusion des bâtis et d'analyser les rétrodiffusions correspondantes. Une règle de compensation des effets cardinaux fondée uniquement sur les réponses des objets en fonction de leur orientation par rapport au plan d'illumination par le faisceau du radar a été mise au point. Des applications de cet algorithme sur des images RADARSAT-1 et RADARSAT-2 en polarisations HH, HV, VH, et VV ont permis de réaliser de considérables gains et d’éliminer l’essentiel des erreurs de classification dues aux effets cardinaux.

Predicted impact of the sea-level rise at VellareColeroon estuarine region of Tamil Nadu coast in India: Mainstreaming adaptation as a coastal zone management option

Low-lying coastal areas are more vulnerable to the impacts of climate change as they are highly prone for inundation to SLR (Sea-Level Rise). This study presents an appraisal of the impacts of SLR on the coastal natural resources and its dependent social communities in the low-lying area of VellareColeroon estuarine region of the Tamil Nadu coast, India. Digital Elevation Model (DEM) derived from SRTM 90M (Shuttle Radar Topographic Mission) data, along with GIS (Geographic Information System) techniques are used to identify an area of inundation in the study site. The vulnerability of coastal areas in Vellar-Coleroon estuarine region of Tamil Nadu coast to inundation was calculated based on the projected SLR scenarios of 0.5 m and 1 m. The results demonstrated that about 1570 ha of the LULC (Land use and Land cover) of the study area would be permanently inundated to 0.5 m and 2407 ha for 1 m SLR and has also resulted in the loss of three major coastal natural resources like coastal agriculture, mangroves and aquaculture. It has been identified that six hamlets of the social communities who depend on these resources are at high-risk and vulnerable to 0.5 m SLR and 12 hamlets for 1 m SLR. From the study, it has been emphasized that mainstreaming adaptation options to SLR should be embedded within a coastal zone management and planning effort, which includes all coastal natural resources (ecosystem-based adaptation), and its dependent social communities (community-based adaptation) involved through capacity building

GRASS GIS for the distinction of vegetation from buildings using LiDAR altimetric data

La tecnología LiDAR (Light Detection and Ranging), basada en el escaneado del territorio por un telémetro láser aerotransportado, permite la construcción de Modelos Digitales de Superficie (DSM) mediante una simple interpolación, así como de Modelos Digitales del Terreno (DTM) mediante la identificación y eliminación de los objetos existentes en el terreno (edificios, puentes o árboles). El Laboratorio de Geomática del Politécnico de Milán – Campus de Como- desarrolló un algoritmo de filtrado de datos LiDAR basado en la interpolación con splines bilineares y bicúbicas con una regularización de Tychonov en una aproximación de mínimos cuadrados. Sin embargo, en muchos casos son todavía necesarios modelos más refinados y complejos en los cuales se hace obligatorio la diferenciación entre edificios y vegetación. Este puede ser el caso de algunos modelos de prevención de riesgos hidrológicos, donde la vegetación no es necesaria; o la modelización tridimensional de centros urbanos, donde la vegetación es factor problemático. (...)

Cálculo del tiempo de concentración en hidrología con GRASS

Se presenta un programa desarrollado mediante GRASS 6.2 que permite calcular el tiempo de concentración en cuencas hidrográficas a partir del modelo digital de elevaciones. El hecho de que no haya ningún comando específico en GRASS que permita calcular el tiempo de concentración nos ha llevado a calcular éste a partir de aquellos comandos que aportan información hidrográfica, utilizando básicamente r.watershed. Además, se analizan los comandos GRASS que dan las direcciones de flujo, sus semejanzas, discrepancias y utilidades. Finalmente, se comparan los resultados obtenidos aplicando diferentes valores a la técnica de adaptación del modelo digital de elevaciones a partir de la información vectorial de la red hidrográfica existente

Realismo 3D aplicado a la Gestión Municipal

La visualización 3D ofrece una serie de ventajas y funcionalidades cada vez más demandadas, por lo que es conveniente su incorporación a las aplicaciones GIS. El sistema propuesto integra la vista 2D propia de un GIS y la vista 3D garantizando la interacción entre ellas y teniendo por resultado una solución GIS integral. Se permite la carga de Modelos Digitales del Terreno (MDT), de forma directa o empleando servicios OGC-CSW, para la proyección de los elementos 2D, así como la carga de modelos 3D. Además el sistema está dotado de herramientas para extrusión y generación automática de volúmenes empleando parámetros existentes en la información 2D. La generación de las construcciones a partir de su altura y la elaboración de redes tridimensionales a partir de la profundidad en las infraestructuras son algunos casos prácticos de interés. Igualmente se permite no sólo la consulta y visualización sino también la edición 3D, lo que supone una importante ventaja frente a otros sistemas 3D. LocalGIS, Sistema de Información Territorial de software libre aplicado a la gestión municipal, es el sistema GIS empleado para la incorporación del prototipo. Se permite por lo tanto aplicar todas las ventajas y funcionalidades propias del 3D a la gestión municipal que LocalGIS realiza. Esta tecnología ofrece un campo de aplicaciones muy amplio y prometedor

Geochemical mapping of carbonate sediments in the Makgadikgadi basin, Botswana using moderate resolution remote sensing data

This paper maps the carbonate geochemistry of the Makgadikgadi Pans region of northern Botswana from moderate resolution (500 m pixels) remotely sensed data, to assess the impact of various geomorphological processes on surficial carbonate distribution. Previous palaeo-environmental studies have demonstrated that the pans have experienced several highstands during the Quaternary, forming calcretes around shoreline embayments. The pans are also a significant regional source of dust, and some workers have suggested that surficial carbonate distributions may be controlled, in part, by wind regime. Field studies of carbonate deposits in the region have also highlighted the importance of fluvial and groundwater processes in calcrete formation. However, due to the large area involved and problems of accessibility, the carbonate distribution across the entire Makgadikgadi basin remains poorly understood. The MODIS instrument permits mapping of carbonate distribution over large areas; comparison with estimates from Landsat Thematic Mapper data show reasonable agreement, and there is good agreement with estimates from laboratory analysis of field samples. The results suggest that palaeo-lake highstands, reconstructed here using the SRTM 3 arc-second digital elevation model, have left behind surficial carbonate deposits, which can be mapped by the MODIS instrument. Copyright (c) 2006 John Wiley & Sons, Ltd.

A geomatics-based approach for the derivation of the spatial distribution of sediment transport processes in periglacial mountain environments

Within this paper modern techniques such as satellite image analysis and tools provided by geographic information systems (GIS.) are exploited in order to extend and improve existing techniques for mapping the spatial distribution of sediment transport processes. The processes of interest comprise mass movements such as solifluction, slope wash, dirty avalanches and rock- and boulder falls. They differ considerably in nature and therefore different approaches for the derivation of their spatial extent are required. A major challenge is addressing the differences between the comparably coarse resolution of the available satellite data (Landsat TM/ETM+, 30 in x 30 m) and the actual scale of sediment transport in this environment. A three-stepped approach has been developed which is based on the concept of Geomorphic Process Units (GPUs): parameterization, process area delineation and combination. Parameters include land cover from satellite data and digital elevation model derivatives. Process areas are identified using a hierarchical classification scheme utilizing thresholds and definition of topology. The approach has been developed for the Karkevagge in Sweden and could be successfully transferred to the Rabotsbekken catchment at Okstindan, Norway using similar input data. Copyright (C) 2008 John Wiley & Sons, Ltd.