Hydrometallurgical process modeling using advanced mathematical tools

Hydrometallurgical process modeling is the main objective of this Master’s thesis work. Three different leaching processes namely, high pressure pyrite oxidation, direct oxidation zinc concentrate (sphalerite) leaching and gold chloride leaching using rotating disc electrode (RDE) are modeled and simulated using gPROMS process simulation program in order to evaluate its model building capabilities. The leaching mechanism in each case is described in terms of a shrinking core model. The mathematical modeling carried out included process model development based on available literature, estimation of reaction kinetic parameters and assessment of the model reliability by checking the goodness fit and checking the cross correlation between the estimated parameters through the use of correlation matrices. The estimated parameter values in each case were compared with those obtained using the Modest simulation program. Further, based on the estimated reaction kinetic parameters, reactor simulation and modeling for direct oxidation zinc concentrate (sphalerite) leaching is carried out in Aspen Plus V8.6. The zinc leaching autoclave is based on Cominco reactor configuration and is modeled as a series of continuous stirred reactors (CSTRs). The sphalerite conversion is calculated and a sensitivity analysis is carried out so to determine the optimum reactor operation temperature and optimum oxygen mass flow rate. In this way, the implementation of reaction kinetic models into the process flowsheet simulation environment has been demonstrated.

Knowledge about sources of dietary fibres and health effects using a validated scale: a cross-country study

Objectives Dietary fibre (DF) is one of the components of diet that strongly contributes to health improvements, particularly on the gastrointestinal system. Hence, this work intended to evaluate the relations between some sociodemographic variables such as age, gender, level of education, living environment or country on the levels of knowledge about dietary fibre (KADF), its sources and its effects on human health, using a validated scale. Study design The present study was a cross-sectional study. Methods A methodological study was conducted with 6010 participants, residing in 10 countries from different continents (Europe, America, Africa). The instrument was a questionnaire of self-response, aimed at collecting information on knowledge about food fibres. The instrument was used to validate a scale (KADF) which model was used in the present work to identify the best predictors of knowledge. The statistical tools used were as follows: basic descriptive statistics, decision trees, inferential analysis (t-test for independent samples with Levene test and one-way ANOVA with multiple comparisons post hoc tests). Results The results showed that the best predictor for the three types of knowledge evaluated (about DF, about its sources and about its effects on human health) was always the country, meaning that the social, cultural and/or political conditions greatly determine the level of knowledge. On the other hand, the tests also showed that statistically significant differences were encountered regarding the three types of knowledge for all sociodemographic variables evaluated: age, gender, level of education, living environment and country. Conclusions The results showed that to improve the level of knowledge the actions planned should not be delineated in general as to reach all sectors of the populations, and that in addressing different people, different methodologies must be designed so as to provide an effective health education.

Sources of Information about Dietary Fibre: A Cross-Country Survey

Problem statement: Dietary fibre (DF) has been recognized as a major determinant for improvement of health. Hence the means of information through which people become aware of its benefits are crucial. Research questions: Where do you usually find information about dietary fibre? What means of communication do you consider the most appropriate to encourage the consumption of dietary fibre? Purpose of the study: This work aimed at studying the sources of information about dietary fibre, as a means to educate people about aspects related to healthy eating. Factors such as gender, level of education, living environment or country were evaluated as to their effect on the selection of sources and preferences.   Research Methods: Descriptive cross-sectional study by means of a questionnaire, applied to a non-probabilistic sample of 6010 participants from 10 countries in different continents (Europe, Africa and America), answered after informed consent by all participants. For the analysis were used several descriptive statistics tools, crosstabs and chi square test to assess the relations between some of the variables under study. Findings: Mostly the information about DF comes from the internet, but television is recognized as suitable. Differences were found between genders, levels of education, living environments and countries. The internet (preferred source), got highest scores for Hungary, urban areas, university education and female gender. The radio (least scored source) was preferred in Egypt, for men and with lower education (primary school). Conclusions: People get information through the internet due to easy access. However, it is to some extent a risk given the impossibility to control de information made public on the internet. The role of health centres and hospitals as well as schools should definitely be increased, as a responsible way to ensure correct information.

Simulation tools for the analysis of single electronic systems

Developments in theory and experiment have raised the prospect of an electronic technology based on the discrete nature of electron tunnelling through a potential barrier. This thesis deals with novel design and analysis tools developed to study such systems. Possible devices include those constructed from ultrasmall normal tunnelling junctions. These exhibit charging effects including the Coulomb blockade and correlated electron tunnelling. They allow transistor-like control of the transfer of single carriers, and present the prospect of digital systems operating at the information theoretic limit. As such, they are often referred to as single electronic devices. Single electronic devices exhibit self quantising logic and good structural tolerance. Their speed, immunity to thermal noise, and operating voltage all scale beneficially with junction capacitance. For ultrasmall junctions the possibility of room temperature operation at sub picosecond timescales seems feasible. However, they are sensitive to external charge; whether from trapping-detrapping events, externally gated potentials, or system cross-talk. Quantum effects such as charge macroscopic quantum tunnelling may degrade performance. Finally, any practical system will be complex and spatially extended (amplifying the above problems), and prone to fabrication imperfection. This summarises why new design and analysis tools are required. Simulation tools are developed, concentrating on the basic building blocks of single electronic systems; the tunnelling junction array and gated turnstile device. Three main points are considered: the best method of estimating capacitance values from physical system geometry; the mathematical model which should represent electron tunnelling based on this data; application of this model to the investigation of single electronic systems. (DXN004909)

Porównawcza analiza strukturalno-funkcjonalna in silico białek STAT i IRF, w celu identyfikacji związków chemicznych, działających jako specyficzne inhibitory funkcjonalne

Wydział Biologii: Instytut Biologii Molekularnej i Biotechnologii

Development of a novel platform for high-throughput gene design and artificial gene synthesis to produce large libraries of recombinant venom peptides for drug discovery

Tese de Doutoramento em Ciências Veterinárias na Especialidade de Ciências Biológicas e Biomédicas

Sexual dysfunction in breast cancer survivors: cross-cultural adaptation of the Sexual Activity Questionnaire for use in Portugal

"Introduction: The increasing survivor population of breast cancer has shifted research and practice interests into the impacts of the disease and treatment in quality of life aspects. The lack of tools available in Portuguese to objectively evaluate sexual function led to the development of this study, which aimed to cross-culturally adapt and validate the Sexual Activity Questionnaire for use in Portugal. Material and Methods: The questionnaire was translated and back-translated, refined following face-to-face interviews with seven breast cancer survivors, and then self-administered by a larger sample at baseline and a fortnight later to test validity and reliability. Results: Following cognitive debriefing (n = 7), minor changes were made and the Sexual Activity Questionnaire was then tested with 134 breast cancer survivors. A 3-factor structure explained 75.5% of the variance, comprising the Pleasure, Habit and Discomfort scales, all yielding good internal consistency (Cronbach’s α > 0.70). Concurrent validity with the FACt-An and the BCPT checklist was good (Spearman’s r > 0.65; p-value < 0.001) and reliability acceptable (Cohen’s k > 0.444). The Sexual Activity Questionnaire allowed the identification of 23.9% of sexually inactive women, for whom the main reasons were lack of interest or motivation and not having a partner. Discussion: Patient-reported outcomes led to a more comprehensive and improved approach to cancer, tackling areas previously abandoned. Future research should focus on the validation of this scale in samples with different characteristics and even in the overall population to enable generalizability of the findings. Conclusion: The adapted Sexual Activity Questionnaire is a valid tool for assessing sexual function in breast cancer survivors in Portugal."

Sources of Information about Dietary Fibre: A Cross-Country Survey

Dietary fibre (DF) has been recognized as a major determinant for improvement of health. Hence the means of information through which people become aware of its benefits are crucial. This work aimed at studying the sources of information about DF, as a means to educate people about aspects related to healthy eating. Factors such as gender, level of education, living environment or country were evaluated as to their effect on the selection of sources and preferences. For this, a descriptive cross-sectional study by means of a questionnaire, applied to a non-probabilistic sample of 6010 participants from 10 countries in different continents (Europe, Africa and America), answered after informed consent by all participants. For the analysis were used several descriptive statistics tools, crosstabs and chi square test to assess the relations between some of the variables under study. The results showed that mostly the information about DF comes from the internet, but the participants recognize that television might be a most suitable way to disseminate information about DF. The results also indicated differences between genders, levels of education, living environments and countries. The internet, the preferred source of information, got highest scores for Hungary, for urban areas, for university level of education and for female gender. The radio, the least scored source of information, was preferred in Egypt, for men and with lower education (primary school). As a conclusion, people get information through the internet due to easy access. However, it is to some extent a risk given the impossibility to control de information made public on the internet. The role of health centers and hospitals as well as schools should definitely be increased, as a responsible way to ensure correct information.

Significant Attributes and Challenges Related to Cross-Functional Team Communications

Purpose The purpose of the research work is to investigate the importance of the communication in the cross-functional teams and in what which communicational tools provide better convenience of communication in cross-functional team members. Methodology An empirical study including the data collection from the interviews conducted from the participants working in cross-functional teams. Qualitative approach has been adopted to understand the communicational attributes in the cross-functional teams. For the analysis both deductive and abductive approach has been used. With the help of theoretical framework and empirical data, conclusions drown for better understanding of the concept. Findings The author has divided the search in two main segments, communicational effects on cross-functional team performance and effectiveness of particular communicational tools used by team members and team leaders. Empirical findings shows that without proper communication, cross-functional team are less tend to perform well to achieve set goals as well as face to face communications are more effective than other communicational tools.  Research limitations The research work is limited to Scandinavian countries. Organizational communicational structures are not studied due to time factor. Other limitation of this research work is effect of cultural differences on communication. Implications The research work provides deep understanding of the different communicational effects on cross-functional team performance. The choice of communicational tool and proportional importance for the team members will help managers while selecting the tools of communication with the team members. Originality / value During the literature studies, author determined that there is potential of research for the communicational tools used in cross-functional team communications. The social media is taking over the traditional communicational tools which provide value for findings. 

Terminology Cross-Domain Final Report

The InterPARES 2 Terminology Cross-Domain has created three terminological instruments in service to the project, and by extension, Archival Science. Over the course of the five-year project this Cross-Domain has collected words, definition, and phrases from extant documents, research tools, models, and direct researcher submission and discussion. From these raw materials, the Cross-Domain has identified a systematic and pragmatic way establishing a coherent view on the concepts involved in dynamic, experiential, and interactive records and systems in the arts, sciences, and e-government.The three terminological instruments are the Glossary, Dictionary, and Ontologies. The first of these is an authoritative list of terms and definitions that are core to our understanding of the evolving records creation, keeping, and preservation environments. The Dictionary is a tool used to facilitate interdisciplinary communication. It contains multiple definitions for terms, from multiple disciplines. By using this tool, researchers can see how Archival Science deploys terminology compared to Computer Science, Library and Information Science, or Arts, etc. The third terminological instrument, the Ontologies, identify explicit relationships between concepts of records. This is useful for communicating the nuances of Diplomatics in the dynamic, experiential, and interactive environment.All three of these instruments were drawn from a Register of terms gathered over the course of the project. This Register served as a holding place for terms, definitions, and phrases, and allowed researchers to discuss, comment on, and modify submissions. The Register and the terminological instruments were housed in the Terminology Database. The Database provides searching, display, and file downloads – making it easy to navigate through the terminological instruments.Terminology used in InterPARES 1 and the UBC Project was carried forward to this Database. In this sense, we are building on our past knowledge, and making it relevant to the contemporary environment.

Urban air quality: new high-resolution modeling approaches and forecasting tools for citizens

Air pollution is one of the greatest health risks in the world. At the same time, the strong correlation with climate change, as well as with Urban Heat Island and Heat Waves, make more intense the effects of all these phenomena. A good air quality and high levels of thermal comfort are the big goals to be reached in urban areas in coming years. Air quality forecast help decision makers to improve air quality and public health strategies, mitigating the occurrence of acute air pollution episodes. Air quality forecasting approaches combine an ensemble of models to provide forecasts from global to regional air pollution and downscaling for selected countries and regions. The development of models dedicated to urban air quality issues requires a good set of data regarding the urban morphology and building material characteristics. Only few examples of air quality forecast system at urban scale exist in the literature and often they are limited to selected cities. This thesis develops by setting up a methodology for the development of a forecasting tool. The forecasting tool can be adapted to all cities and uses a new parametrization for vegetated areas. The parametrization method, based on aerodynamic parameters, produce the urban spatially varying roughness. At the core of the forecasting tool there is a dispersion model (urban scale) used in forecasting mode, and the meteorological and background concentration forecasts provided by two regional numerical weather forecasting models. The tool produces the 1-day spatial forecast of NO2, PM10, O3 concentration, the air temperature, the air humidity and BLQ-Air index values. The tool is automatized to run every day, the maps produced are displayed on the e-Globus platform, updated every day. The results obtained indicate that the forecasting output were in good agreement with the observed measurements.

Development of a numerical platform for the modeling and optimal control of liquid metal flows

The main purpose of this work is to develop a numerical platform for the turbulence modeling and optimal control of liquid metal flows. Thanks to their interesting thermal properties, liquid metals are widely studied as coolants for heat transfer applications in the nuclear context. However, due to their low Prandtl numbers, the standard turbulence models commonly used for coolants as air or water are inadequate. Advanced turbulence models able to capture the anisotropy in the flow and heat transfer are then necessary. In this thesis, a new anisotropic four-parameter turbulence model is presented and validated. The proposed model is based on explicit algebraic models and solves four additional transport equations for dynamical and thermal turbulent variables. For the validation of the model, several flow configurations are considered for different Reynolds and Prandtl numbers, namely fully developed flows in a plane channel and cylindrical pipe, and forced and mixed convection in a backward-facing step geometry. Since buoyancy effects cannot be neglected in liquid metals-cooled fast reactors, the second aim of this work is to provide mathematical and numerical tools for the simulation and optimization of liquid metals in mixed and natural convection. Optimal control problems for turbulent buoyant flows are studied and analyzed with the Lagrange multipliers method. Numerical algorithms for optimal control problems are integrated into the numerical platform and several simulations are performed to show the robustness, consistency, and feasibility of the method.

Green approach to Palladium Cross-Coupling reactions and development of new methodologies based on highly abundant metals

Transition metal catalyzed cross-coupling reactions represent among the most versatile and useful tools in organic synthesis for the carbon-carbon (C-C) bond formation and have a prominent role in both the academic and pharmaceutical segments. Among them, palladium catalyzed cross-coupling reactions are currently the most versatile. In this thesis, the applications, impact and development of green palladium cross-coupling reactions are discussed. Specifically, we discuss the translation of the Twelve Principles of Green Chemistry and their applications in pharmaceutical organometallic chemistry to stimulate the development of cost-effective and sustainable catalytic processes for the synthesis of active pharmaceutical ingredients (API). The Heck-Cassar-Sonogashira (HCS) and the Suzuki-Miyaura (SM) protocols, using HEP/H2O as green mixture and sulfonated phosphine ligands, allowed to recycle and recover the catalyst, always guaranteeing high yields and fast conversion under mild conditions, with aryl iodides, bromides, triflates and chlorides. No catalyst leakage or metal contamination of the final product were observed during the HCS and SM reactions, respecting the very low limits for metal impurities in medicines established by the International Conference of Harmonization Guidelines Q3D (ICH Q3D). In addition, a deep understanding of the reaction mechanism is very important if the final target is to develop efficient protocols that can be applied at industrial level. Experimental and theoretical studies pointed out the presence of two catalytic cycles depending on the counterion, shedding light on the role of base in catalyst reduction and acetylene coordination in the HCS coupling. Finally, the development of a cross-coupling reaction to form aryldifluoronitriles in the presence of copper is discussed, highlighting the importance of inserting fluorine atoms within biological structures and the use of readily available metals such as copper as an alternative to palladium.

Effect Of Platform Connection And Abutment Material On Stress Distribution In Single Anterior Implant-supported Restorations: A Nonlinear 3-dimensional Finite Element Analysis.

Although various abutment connections and materials have recently been introduced, insufficient data exist regarding the effect of stress distribution on their mechanical performance. The purpose of this study was to investigate the effect of different abutment materials and platform connections on stress distribution in single anterior implant-supported restorations with the finite element method. Nine experimental groups were modeled from the combination of 3 platform connections (external hexagon, internal hexagon, and Morse tapered) and 3 abutment materials (titanium, zirconia, and hybrid) as follows: external hexagon-titanium, external hexagon-zirconia, external hexagon-hybrid, internal hexagon-titanium, internal hexagon-zirconia, internal hexagon-hybrid, Morse tapered-titanium, Morse tapered-zirconia, and Morse tapered-hybrid. Finite element models consisted of a 4×13-mm implant, anatomic abutment, and lithium disilicate central incisor crown cemented over the abutment. The 49 N occlusal loading was applied in 6 steps to simulate the incisal guidance. Equivalent von Mises stress (σvM) was used for both the qualitative and quantitative evaluation of the implant and abutment in all the groups and the maximum (σmax) and minimum (σmin) principal stresses for the numerical comparison of the zirconia parts. The highest abutment σvM occurred in the Morse-tapered groups and the lowest in the external hexagon-hybrid, internal hexagon-titanium, and internal hexagon-hybrid groups. The σmax and σmin values were lower in the hybrid groups than in the zirconia groups. The stress distribution concentrated in the abutment-implant interface in all the groups, regardless of the platform connection or abutment material. The platform connection influenced the stress on abutments more than the abutment material. The stress values for implants were similar among different platform connections, but greater stress concentrations were observed in internal connections.

Delays In Receiving Obstetric Care And Poor Maternal Outcomes: Results From A National Multicentre Cross-sectional Study.

The vast majority of maternal deaths in low-and middle-income countries are preventable. Delay in obtaining access to appropriate health care is a fairly common problem which can be improved. The objective of this study was to explore the association between delay in providing obstetric health care and severe maternal morbidity/death. This was a multicentre cross-sectional study, involving 27 referral obstetric facilities in all Brazilian regions between 2009 and 2010. All women admitted to the hospital with a pregnancy-related cause were screened, searching for potentially life-threatening conditions (PLTC), maternal death (MD) and maternal near-miss (MNM) cases, according to the WHO criteria. Data on delays were collected by medical chart review and interview with the medical staff. The prevalence of the three different types of delays was estimated according to the level of care and outcome of the complication. For factors associated with any delay, the PR and 95%CI controlled for cluster design were estimated. A total of 82,144 live births were screened, with 9,555 PLTC, MNM or MD cases prospectively identified. Overall, any type of delay was observed in 53.8% of cases; delay related to user factors was observed in 10.2%, 34.6% of delays were related to health service accessibility and 25.7% were related to quality of medical care. The occurrence of any delay was associated with increasing severity of maternal outcome: 52% in PLTC, 68.4% in MNM and 84.1% in MD. Although this was not a population-based study and the results could not be generalized, there was a very clear and significant association between frequency of delay and severity of outcome, suggesting that timely and proper management are related to survival.