Alteração cromática de resinas compostas laboratoriais submetidas à imersão em diferentes soluções

The pigmentation of indirect composite resins has been one of the most common reasons that lead the restorative treatment to failure. The purpose of this study was to investigate the effect of different solutions on color stability of indirect composite resins. Five brands of indirect composite resins were tested: Adoro, Resilab, Cristobal, Sinfony and Epricord. The samples were immerged in eleven solutions (n=10): common liquid foods (coke soft drink, red wine, coffee and orange juice), mounthrinses (Listerine, Oral-B, Colgate Plax and Periogard) and bleaching agents (carbamide peroxide 16%, 7.5% and hydrogen peroxide 38%) and artificial saliva (control group). The color was measured by a spectrophotometer before and after 7, 14 and 21 days of immersion in common liquid foods, after 12, 24, 36 and 60 hours of immersion in mounthrinses and after 7 and 14 days of immersion in bleaching agents. The Cristobal and Adoro resins showed highest values of ΔE statistically significant compared to the others resin brands. Adoro’s ΔE values changed significantly after the immersion process in red wine and coffee and also between periods measured. The resins Cristobal and Sinfony showed the highest values of ΔE after the immersion process in Listerine with difference statistically significant in comparison to control group. Besides, there was difference statistically significant of the ΔE values  for  Cristobal  after  immersion  in hydrogen peroxide 7,5% in comparison to control group. It can be conclude that all the solutions promoted color change on the indirect composite resins. However, ΔE values  are  whitin  the  values clinically acceptable.

Different esthetic techniques used in combination to improve the smile

This is a clinical case report of a patient who presented with dental stains in the buccal and proximal aspects of the anterior teeth. Buccal stains were removed using the enamel microabrasion technique, and vital tooth bleaching with carbamide peroxide was also performed. Restorative procedures employing composite resin were done for a better result in the proximal aspect of teeth. Clinical significance: The authors observed the combination of these esthetic techniques improved the patient's smile. Today, dental esthetics attempts to imitate natural teeth by making them white, well-shaped, and aligned with no spots. This has enabled the development of several esthetic techniques, such as microabrasion to remove dental enamel surface stains and surface irregularities,1-6 and vital tooth bleaching to treat yellowish teeth.7 The enamel microabrasion technique uses different abrasive agents associated with chemical solutions,1,2,4,6 allowing the removal of intrinsic, hard-texture stains, and different coloring spots on the enamel surface, as well as correction of irregularities on the dental buccal surface.1,8 The various microabrasive products include the Opalustre® (Ultradent Products, http://www.ultradent.com)or Prema® Compound (Premier Dental Products, http://www.premusa.com), a low-concentration hydrochloric acid product associated with silica microparticles that is certainly effective for microabrasion technique,4,6,9,10 providing a good safety profile for the patient and professional. The microabrasion technique also promotes micro-reduction on the adamantine surface.4,5,10 In some cases, after its completion, microabrasion may cause teeth to become darker or yellowish because of the thinner remaining enamel surface, leading to more evident observation of the dentinal tissue, which in general determines tooth color. In these clinical conditions, correction of the color pattern of dental elements can be obtained with carbamide peroxide products applied in custom trays, such as the bleaching products Whiteness Perfect at 10% or 16% (FGM Productos Odontologicos, http://www.fgm.ind.br) or Opalescence® at 10% or 15% (Ultradent Products), with a considerable margin of clinical success, provided it is well indicated, well performed, and supervised by the professional.4,6,9,10 Considering all the aforementioned aspects, the authors present a clinical case about a dental-enamel microabrasion technique used to remove buccal enamel surface stains associated with dental vital bleaching and restorative procedures in the proximal aspect of anterior teeth. - See more at: https://www.dentalaegis.com/cced/2010/08/different-esthetic-techniques-used-in-combination-to-recover-the-smile#sthash.McFoH7El.dpuf

Atividade toxicogenética de corantes usados na formulação da tintura capilar preta, individuais e em associação, por meio de diferentes ensaios biológicos

Pós-graduação em Ciências Biológicas (Biologia Celular e Molecular) - IBRC

Matemática e arte: incursões na interdisciplinaridade

The complex analysis is, in actuality, a fundamental mathematical object, given its applicability to various areas of science. This paper proposes a more interesting intertwining of mathematical content to the Visual Arts, through computer graphics. The presentation of aesthetic standards, using the “domain coloring” for viewing a complex function, shows that algebraic and geometric properties can be “colored” which makes its study more human, contextualized, pleasant and dynamic, leading to greater ability to understand, to absorb and to create concepts. This work shows the contribution to the interdisciplinarity to study of mathematics.

Rochas calciossilicáticas e feldspáticas na região de Castro Alves e Rafael Jambeiro (BA)

The towns of Castro Alves and Rafael Jambeiro, central-east of Bahia state, are located in the east of São Francisco Craton, in granulite terrains of Salvador-Curaçá Belt, formed in Paleoproterozoic. The region of study contains ortognaisses of Caraíba Complex, metamafic and metaultramafic rocks of São José do Jacuípe Suite, metasedimentary rocks of Tanque Novo-Ipirá Complex, granitoids, pegmatites and alkaline rocks. The study carried out regional and detailed geological mapping in addition to petrographical and geochemical characterization of six areas in the search for targets of feldspar and white diopside, minerals used in ceramic industry. The areas consist of granitic ortognaisses interspersed with lenses of mafic granulite rocks, calc-silicate rock, banded iron formations, paragnaisses, quartzites, and bodies of quartz-feldspar or feldspar pegmatites and alkaline rocks that fill discontinuities. The region of study contains four deformations phases, with a predominance of ductile structures. The foliation Sn has N30E to N70W direction, high angle of dip and is characterized by compositional banding of granoblastic and felsic bands interspersed with nematoblastic or lepidoblastic mafic bands. A mineral or stretching lineation Ln is associated with Sn and has trend of S55E to S72E. The rocks have been suffered a regional metamorphism with granulite facies peak and partial retrogression to greenschist facies. Geochemical studies indicate that the green coloring calc-silicate rocks have lower SiO2, MgO and higher Fe2O3 content compared with white calcssilicate rocks. The alkaline rocks of the studied area have higher Na2O, SiO2 and lower K2O, Fe2O3 content compared with others Paleoproterozoic alkaline rocks of Bahia state. The targets of diopside are associated with white calc-silicate rocks, while the targets of feldspar are associated with paragnaisses, pegmatites and alkaline rocks

Imunohistoquímica em órgãos de tilápias-do-Nilo imunizadas com antígeno insolúvel de Streptococcus agalactiae

Pós-graduação em Medicina Veterinária - FCAV

Valores nutricionais e qualitativos de carnes bovinas (Longissimus thoracis) provenientes de sistemas de produção orgânica e convencional

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Molecular characterization of Pleurotus ostreatus commercial strains by random amplified polymorphic DNA (RAPD)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The Tripartite Ramsey Number for Trees

We prove that for all epsilon>0 there are alpha>0 and n(0)is an element of N such that for all n >= n(0) the following holds. For any two-coloring of the edges of Kn, n, n one color contains copies of all trees T of order t <=(3 - epsilon)n/2 and with maximum degree Delta(T)<= n(alpha). This confirms a conjecture of Schelp. (c) 2011 Wiley Periodicals, Inc. J Graph Theory 69: 264300, 2012

Matrix-vector multiplication and triangular linear solver using GPGPU for symmetric positive definite matrices derived from elliptic equations

The modern GPUs are well suited for intensive computational tasks and massive parallel computation. Sparse matrix multiplication and linear triangular solver are the most important and heavily used kernels in scientific computation, and several challenges in developing a high performance kernel with the two modules is investigated. The main interest it to solve linear systems derived from the elliptic equations with triangular elements. The resulting linear system has a symmetric positive definite matrix. The sparse matrix is stored in the compressed sparse row (CSR) format. It is proposed a CUDA algorithm to execute the matrix vector multiplication using directly the CSR format. A dependence tree algorithm is used to determine which variables the linear triangular solver can determine in parallel. To increase the number of the parallel threads, a coloring graph algorithm is implemented to reorder the mesh numbering in a pre-processing phase. The proposed method is compared with parallel and serial available libraries. The results show that the proposed method improves the computation cost of the matrix vector multiplication. The pre-processing associated with the triangular solver needs to be executed just once in the proposed method. The conjugate gradient method was implemented and showed similar convergence rate for all the compared methods. The proposed method showed significant smaller execution time.

Performance evaluation of a parallel algorithm for simultaneous untangling and smoothing of tetrahedral meshes

[EN]A new parallel algorithm for simultaneous untangling and smoothing of tetrahedral meshes is proposed in this paper. We provide a detailed analysis of its performance on shared-memory many-core computer architectures. This performance analysis includes the evaluation of execution time, parallel scalability, load balancing, and parallelism bottlenecks. Additionally, we compare the impact of three previously published graph coloring procedures on the performance of our parallel algorithm. We use six benchmark meshes with a wide range of sizes. Using these experimental data sets, we describe the behavior of the parallel algorithm for different data sizes. We demonstrate that this algorithm is highly scalable when it runs on two different high-performance many-core computers with up to 128 processors...

Biochemische, strukturelle und funktionelle Untersuchungen der Tyrosinase aus Streptomyces castaneoglobisporus HUT6202

Die Tyrosinase aus Streptomyces castaneoglobisporus HUT6202 ist für biochemische und strukturelle Untersuchungen besonders gut geeignet, da sie als globuläres binäres Protein vorliegt. Als bakterielles Protein lässt sich die Tyrosinase aus Streptomyces in einen E.coli Expressionsstamm klonieren und exprimieren.rnIn dieser Arbeit wurde die Tyrosinase zusammen mit seinem Hilfsprotein (ORF378) polycistronisch in Escherichia coli BL21 (DE3)-Zellen heterolog exprimiert. Das Produkt der Expression ergab einen funktionellen binären Proteinkomplex, welcher mit einer Ausbeute von bis zu 0,8 mg/L über einen C-terminalen His-Tag sowie eine anschließende Größenausschlusschromatographie auf bis 95 % gereinigt werden konnte.rnDer gereinigte binäre Komplex aus Tyrosinase und Hilfsprotein wurde mit Hilfe isoelektrischer Fokussierung untersucht um die jeweiligen isoelektrischen Punkte der beiden Proteine zu bestimmen (pI 4,8 für die Tyrosinase sowie 4,9 für das Hilfsprotein), welche stark von den anhand der Aminosäuresequenz errechneten pIs abweichen (6,2 und 6,4). Des Weiteren wurde die Tyrosinase auf ihre Substratspezifität getestet, wobei sich ein bevorzugter Umsatz von Kaffeesäure (Km 1,4 mM; Vmax 21.5 µM min-1) und p-Cumarsäure zeigte. Es erfolgte keine Katalyse von Tyrosin und Tyramin sowie nur in geringem Maß von L-Dopa. Darüber hinaus konnte gezeigt werden, dass ein enzymatischer Umsatz nur stattfindet, nachdem die Tyrosinase mit CuSO4 aktiviert wurde. Eine Aktivierung mit SDS konnte nicht beobachtet werden.rnZur Untersuchung der Aktivierung des binären Komplexes lässt sich mit Hilfe dynamischer Lichtstreuung und analytischer Ultrazentrifugation eine Dissoziation des Komplexes in seine monomeren Komponenten nach Aktivierung mit CuSO4 vermuten. Dies würde den bislang hypothetisch angenommenen Mechanismus der Aktivierung der Tyrosinase aus S.castaneoglobisporus bestätigen.rnIn silico-Arbeiten wurden durchgeführt um ein tieferes Verständnis der Substratspezifität zu bekommen. Substrat-Docking-Experimente bestätigten die im Labor erhaltenen Ergebnisse. Eine Strukturanalyse deutet auf eine sterische Hinderung der Substrataufnahme für Substrate mit sekundären Aminogruppen hin. rnAnalysen des Protein-Interface von Tyrosinase und Hilfsprotein konnten kupferfixierende Faltungsmotive an der Oberfläche des Hilfsproteins aufzeigen. Bei diesen handelt es meist um 3-4 polare Aminosäuren, welche in der Lage sind, ein Kupferatom zu fixieren. Durch die Bindung der Kupferatome an die fixierenden Motive werden wahrscheinlich zahlreiche Wasserstoff-brückenbindungen getrennt, welche den Komplex in seiner inaktiven Form stabilisieren.rn

Contributions to exact approaches in combinatorial optimization

The focus of this thesis is to contribute to the development of new, exact solution approaches to different combinatorial optimization problems. In particular, we derive dedicated algorithms for a special class of Traveling Tournament Problems (TTPs), the Dial-A-Ride Problem (DARP), and the Vehicle Routing Problem with Time Windows and Temporal Synchronized Pickup and Delivery (VRPTWTSPD). Furthermore, we extend the concept of using dual-optimal inequalities for stabilized Column Generation (CG) and detail its application to improved CG algorithms for the cutting stock problem, the bin packing problem, the vertex coloring problem, and the bin packing problem with conflicts. In all approaches, we make use of some knowledge about the structure of the problem at hand to individualize and enhance existing algorithms. Specifically, we utilize knowledge about the input data (TTP), problem-specific constraints (DARP and VRPTWTSPD), and the dual solution space (stabilized CG). Extensive computational results proving the usefulness of the proposed methods are reported.

Comparison among gold standard techniques used for the validation of methods for occlusal caries detection

The aim of this in vitro study was to assess the agreement among four techniques used as gold standard for the validation of methods for occlusal caries detection. Sixty-five human permanent molars were selected and one site in each occlusal surface was chosen as the test site. The teeth were cut and prepared according to each technique: stereomicroscopy without coloring (1), dye enhancement with rhodamine B (2) and fuchsine/acetic light green (3), and semi-quantitative microradiography (4). Digital photographs from each prepared tooth were assessed by three examiners for caries extension. Weighted kappa, as well as Friedman's test with multiple comparisons, was performed to compare all techniques and verify statistical significant differences. Results: kappa values varied from 0.62 to 0.78, the latter being found by both dye enhancement methods. Friedman's test showed statistical significant difference (P < 0.001) and multiple comparison identified these differences among all techniques, except between both dye enhancement methods (rhodamine B and fuchsine/acetic light green). Cross-tabulation showed that the stereomicroscopy overscored the lesions. Both dye enhancement methods showed a good agreement, while stereomicroscopy overscored the lesions. Furthermore, the outcome of caries diagnostic tests may be influenced by the validation method applied. Dye enhancement methods seem to be reliable as gold standard methods.

Automated design of self-stabilization

Self-stabilization is a property of a distributed system such that, regardless of the legitimacy of its current state, the system behavior shall eventually reach a legitimate state and shall remain legitimate thereafter. The elegance of self-stabilization stems from the fact that it distinguishes distributed systems by a strong fault tolerance property against arbitrary state perturbations. The difficulty of designing and reasoning about self-stabilization has been witnessed by many researchers; most of the existing techniques for the verification and design of self-stabilization are either brute-force, or adopt manual approaches non-amenable to automation. In this dissertation, we first investigate the possibility of automatically designing self-stabilization through global state space exploration. In particular, we develop a set of heuristics for automating the addition of recovery actions to distributed protocols on various network topologies. Our heuristics equally exploit the computational power of a single workstation and the available parallelism on computer clusters. We obtain existing and new stabilizing solutions for classical protocols like maximal matching, ring coloring, mutual exclusion, leader election and agreement. Second, we consider a foundation for local reasoning about self-stabilization; i.e., study the global behavior of the distributed system by exploring the state space of just one of its components. It turns out that local reasoning about deadlocks and livelocks is possible for an interesting class of protocols whose proof of stabilization is otherwise complex. In particular, we provide necessary and sufficient conditions – verifiable in the local state space of every process – for global deadlock- and livelock-freedom of protocols on ring topologies. Local reasoning potentially circumvents two fundamental problems that complicate the automated design and verification of distributed protocols: (1) state explosion and (2) partial state information. Moreover, local proofs of convergence are independent of the number of processes in the network, thereby enabling our assertions about deadlocks and livelocks to apply on rings of arbitrary sizes without worrying about state explosion.