Two-year Clinical Performance of Self-etching Adhesive Systems in Composite Restorations of Anterior Teeth

Objective: The aim of this study was to evaluate the two-year clinical performance of Class III, IV, and V composite restorations using a two-step etch-and-rinse adhesive system (2-ERA) and three one-step self-etching adhesive systems (1-SEAs).Material and Methods: Two hundred Class III, IV, and V composite restorations were placed into 50 patients. Each patient received four composite restorations (Amaris, Voco), and these restorations were bonded with one of three 1-SEAs (Futurabond M, Voco; Clearfil S3 Bond, Kuraray; and Optibond All-in-One, Kerr) or one 2-ERA (Adper Single Bond 2/3M ESPE). The four adhesive systems were evaluated at baseline and after 24 months using the following criteria: restoration retention, marginal integrity, marginal discoloration, caries occurrence, postoperative sensitivity and preservation of tooth vitality. After two years, 162 restorations were evaluated in 41 patients. Data were analyzed using the chi(2) test (p<0.05).Results: There were no statistically significant differences between the 2-ERA and the 1-SEAs regarding the evaluated parameters (p>0.05).Conclusion: The 1-SEAs showed good clinical performance at the end of 24 months.

Desempenho adesivo de sistemas de união à dentina aplicados in vivo e in vitro: efeito da pressão intrapulpar e profundidade dentinária

O objetivo do presente estudo foi investigar a influência da pressão intrapulpar e da profundidade dentinária sobre o desempenho adesivo de dois agentes de união à dentina, Single Bond (3M ESPE, St. Paul, MN, EUA) e Clearfil SE Bond (Kuraray, Tokyo, Japão), aplicados in vitro e in vivo. Quarenta e oito prémolares superiores hígidos foram selecionados e os pares pertencentes aos mesmos pacientes foram aleatoriamente distribuídos em 4 grupos experimentais de acordo com o sistema adesivo e a pressão intrapulpar, presente ou ausente. Dos dentes pertencentes ao mesmo par, um foi tratado in vivo e o outro in vitro. A ausência ou presença de pressão intra-pulpar foi determinada in vivo pelo uso de anestésicos locais com ou sem vasoconstritor, respectivamente. In vitro, os dentes foram mantidos sob pressão hidrostática de 15 cm de água por 24 horas. Cavidades de classe I foram preparadas e os sistemas adesivos aplicados de acordo com a recomendação dos fabricantes, seguidos da restauração incremental em resina composta. Para os dentes tratados in vitro, os mesmos procedimentos restauradores foram realizados após 6 meses de armazenagem em solução contendo timol 0,1%. Espécimes com área de secção transversal de 1 mm2 foram obtidos e submetidos ao ensaio mecânico de microtração. In vivo, ambos os sistemas adesivos apresentaram desempenho adesivo comparável, enquanto in vitro, o sistema Single Bond foi superior ao sistema Clearfil SE Bond. Esse último não foi influenciado por nenhuma das variáveis estabelecidas no estudo, ou seja, aplicação in vitro ou in vitro, presença de pressão intrapulpar e profundidade em dentina. O sistema Single Bond aplicado sob pressão intrapulpar positiva sofreu variação significante de resistência de união em função da profundidade da dentina, ou seja, em dentina profunda seu desempenho adesivo... (Resumo completo, clicar acesso eletrônico abaixo)

Effect of thermo-mechanical load cycling on silorane-based composite restorations

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Volumetric microleakage assessment of glass-ionomer-resin composite hybrid materials

Objective: This study was intended to quantify the marginal leakage of three glass-ionomer-resin composite hybrid materials and compare it with the leakage exhibited by a glass-ionomer cement and a bonded resin composite system. Method and materials: Standardized Class V cavities were prepared on root surfaces of 105 extracted human teeth, randomly assigned to five groups of 21 each, and restored with either Ketac-Fil Aplicap, Z100/Scotchbond Multi-Purpose Plus, Vitremer, Photac-Fil Aplicap, or Dyract. The teeth were thermally stressed for 500 cycles and stained with methylene blue. The microleakage was quantified spectrophotometrically, and the data were statistically analyzed with Friedman's test. Results: There were no significant differences in microleakage among the five groups. Restorations of all tested materials showed some marginal leakage in Class V cavities. Conclusion: The microleakage performance of glass-ionomer-resin composite hybrid materials was similar to those of a conventional glass-ionomer and a bonded resin composite system.

Avaliação da prevalência do tipo de crescimento crânio facial nas diferentes más oclusões, de acordo com a classificação de angle

During the orthodontic correction planning in addition to dental-jaw correction, facial aesthetics is the orthodontist's and patient's major concern. To prevent facial aesthetics damage is really important to take into account the type of craniofacial growth: mesofacial (balanced), dolichofacial (vertical) or brachyfacial (horizontal). We evaluated 152 documentation files from the Department of Orthodontics of Dental University of Sao Jose dos Campos- UNESP in order to analyze what kind of growth occurs in most Class I malocclusions, Class II and Class III Angle of treated individuals from 6 to 12 years old. From the randomly collected samples, 15 of them belonged to Class I Angle malocclusions; 123 belonged to Angle Class II and 14 to Class III malocclusion. The results showed that in Class I, 66.67% were classified as dolicocephalic; in Class II, 64.23% were classified as dolicocephalic and in Class III, 50% were brachycephalic. We conclude that the dolichofacial was the type which ocurred the most, both in females and males and both in malocclusion Class I and Class II. The brachyfacial type most occurred in Class III malocclusion and the mesofacial type occurred in smaller numbers in the three malocclusions studied

Estudo comparativo do efeito da terapia fotodinâmica e uso de antibióticos em lesões podais (Bumblefoot) em pinguins de Magalhães (Spheniscus magellanicus)

Pós-graduação em Biotecnologia Animal - FMVZ

Resistência de união e microinfiltração em restaurações de resina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Immediate human pulp response to ethanol-wet bonding technique

To evaluate the short-term response of human pulps to ethanol-wet bonding technique. Methods Deep class V cavities were prepared on 17 sound premolars and divided into three groups. After acid-etching, the cavities from groups 1 (G1) and 2 (G2) were filled with 100% ethanol or distilled water, respectively, for 60 s before the application of Single Bond 2. In group 3 (G3, control), the cavity floor was lined with calcium hydroxide before etching and bonding. All cavities were restored with resin composite. Two teeth were used as intact control. The teeth were extracted 48 h after the clinical procedures. From each tooth serial sections were obtained and stained with haematoxylin and eosin (H/E) and Masson's trichrome. Bacteria microleakage was assessed using Brown & Brenn. All sections were blindly evaluated for five histological features. Results Mean remaining dentine thickness was 463 ± 65 μm (G1); 425 ± 184 μm (G2); and 348 ± 194 μm (G3). Similar pulp reactions followed ethanol- or water-wet bonding techniques. Slight inflammatory responses and disruption of the odontoblast layer related to the cavity floor were seen in all groups. Stained bacteria were not detected in any cavities. Normal pulp tissue was observed in G3 except for one case. Conclusions After 48 h, ethanol-wet bonding does not increase pulpal damage compared to water-wet bonding technique. Clinical significance Ethanol-wet bonding may increase resin-dentine bond durability. This study reported the in vivo response of human pulp tissue when 100% ethanol was applied previously to an etch-and-rinse simplified adhesive system.

Cuspal movement related to different polymerization protocols

Objective: The aim of this study to investigate the effects of different polymerization protocols on the cuspal movement in class II composite restorations. Materials and methods: Human premolar teeth were prepared with class II cavities and then restored with composite and three-step and two-step etch-and-rinse adhesive systems under different curing techniques (n = 10). It was used a lightemittingdiode curing unit and the mode of polymerization were: standard (exposure for 40 seconds at 700 mW/cm2), pulse-delay (initial exposure for 6 seconds at 350 mW/cm2 followed by a resting period of 3 minutes and a final exposure of 37 seconds at 700 mW/cm2) and soft-start curing (exposure 10 seconds at 350 mW/cm2 and 35 seconds at 700 mW/cm2). The cuspal distance (µm) was measured before and after the restorative procedure and the difference was recorded as cuspal movement. The data were submitted to two-way ANOVA and Bonferroni test (p < 0.05). Results: The type of adhesive system did not influenced the cuspal movement for all the curing methods. Standard protocol showed the highest values of cuspal movement and was statistically different from the pulse-delay and soft-start curing modes. Conclusion: Although the cuspal displacement was not completely avoided, alternative methods of photocuring should be considered to minimize the clinical consequences of composites contraction stress.

Desordens temporomandibulares em usuários de prótese parcial removível: prevalência de acordo com a classificação de Kennedy

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Orthognathic Surgery in Patients With Cleidocranial Dysplasia

The aim of this study was to report the orthodontic-surgical approach of a 21-year-old female patient diagnosed with cleidocranial dysplasia. An orthognathic surgery was performed in the maxilla and mandible during the same procedure to correct an existing dentofacial deformity (class III malocclusion). In addition, malar prostheses were used to correct midface deficiency. After surgical intervention, orthodontic treatment continued in order to promote stability, function, and aesthetics. Cases of cleidocranial dysplasia treated with the defined criteria can bring aesthetic and functional benefits to the patient.

Evaluation of nasal obstruction in various sagittal skeletal deformity of jaws

Nasal obstruction (NO) is a common symptom present in 25% of the general population, which significantly interferes with the quality of life. The different facial profiles and malocclusion patterns could be associated with the degree of NO. In order to evaluate the nasal function in patients with different facial morphology patterns, the authors developed a prospective study in which 88 patients from a dentofacial deformities center were included. These patients were submitted to fibrorhinoscopy (Mashida, ENT PIII) with a 3.2-mm cannula under topical anesthesia to evaluate septal deviation, inferior and medium turbinates, and pharyngeal tonsils. The 88 patients included in the study were divided into 3 groups according to the classification of the facial profile, distributed as follows: 32 class I, 28 class II, and 28 class III; the data collected was statistically analyzed by analysis of variance and the results are shown. The patients included in this study presented similar prevalence of NO with the reduction of airway function efficiency. Although it was not a statistically different, the group II presented higher mean Nasal Obstruction Syndrome Evaluation scores.

Estudo da estabilidade da cirurgia do tipo sagital da mandíbula com vista a correção de deformidades faciais

This research evaluated the surgical stabilily in patients with mandibular prognathism and retrognathism in which was used sagital split technic to correct those detormities. Twelve patients were selected from the clinic of only one experienced surgeon. Six patients presenter a Class III 6 a Class II molar relationship. A comparative cefalometric analysis using linear and angular measurements was performed of pre-surgery, imediate pós-surgery and 1 year follow-up. The following conclusions were obtained. 1 The Dal Pont sagital split technic modified by Epker to correct mandibular prognathisn and retroghnatism is a stable technic and must be indicated to correct those deformities. 2 Small relapses are easily corrected by the post-surgical orthodontic treatment. 3 A small over correction is advised in cases of large mandibular advancements or set bascks. 4 In those cases which a large amount of mandibular retrusion on advancement need to be performed, a combination of maxillary and mandibular surgery should be used. Rigid fixation technic is also indicated in those cases

Correção da deficiência transversa da maxila por meio da expansão rápida da maxila cirurgicamente assistida

Fundamentation: The correction of maxillary transverse deficiencies involves orthodontic and surgical procedures that can be performed before or after skeletal maturity. The surgically assisted rapid maxillary expansion (SAR ME) is performed by osteotomies through the lateral walls of the maxilla, zygomatic and canines buttresses, palatal and pterygomaxillary sutures, causing the maxillary disjunction. Followed by activation of the expander to the desired over-expansion in order to correct intercuspal later. Objective: The purpose of this study was to discuss the issues involved in the diagnosis of maxillary atresia, SAR ME indications, as well as surgical technique, through a case study. Methods: The male patient, 19 years old, had severe transverse maxillary deficiency with facial pattern III , Class III , with great lip incompetence. The patient underwent general anesthesia in a hospital environment, the osteotomies was done according to the technique described by Epker and Wolford (1980). Postoperatively, the patient underwent activations daily for 15 days and after 6 months, the orthodontist installed fixed orthodontic appliance to prepare the patient to orthognathic surgery later. Conclusion: The diagnosis by clinical evaluation and models study is essential for the indication of SAR ME and this procedure provides good predictability in the correction of transverse deficiency, with minimal morbidity.

Tratamento compensatorio da má oclusnao de classe lll: revisão de literatura

Class III malocclusion is less common occlusal relationship, covering less than 5% of the population. There are various forms of treatment in Class III malocclusion. Depending on how the form is expressed Class III and age of the patient, the therapy may be orthopedic and orthodontic surgical orthodontics. The objective was to review the literature of the last 10 years about ways to compensatory treatment of Class III malocclusion. Several articles were published between 04/2003 and 04/2013 in the Pubmed database from the keyword "Class III malocclusion". However, only 19 articles that addressed the compensatory treatment of Class III were selected. Based on the selected items it was concluded that the treatment of Class III malocclusions in children before the peak of pubertal growth has better prognosis with greater effects orthopedic and orthodontic minor effects. The ideal treatment option for this condition is the Rapid maxillary expansion associated with maxillary protraction of the same. The treatment of Class III malocclusion in young people after the peak of pubertal growth is doubtful prognosis. You can opt to treat rapid maxillary expansion and maxillary protraction of the same or fixed appliance, however, orthopedic effects can be the same or smaller than the orthodontic effects, depending on the age of the patient. Depending on the degree of Class III malocclusion in adults, the treatment will consist of dental compensations or orthognathic surgery.