Efeitos de tratamentos hidrotérmicos nas propriedades viscográficas e amidos resistentes em féculas de mandioca

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Máscara e representação no livro do Desassossego

Pós-graduação em Estudos Literários - FCLAR

Desempenho agronômico de híbridos de milho em diferentes arranjos populacionais em Jaboticabal-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genotoxicidade humana e fármacos antidepressivos: avaliação da duloxetina em culturas de linfócitos

Fármacos antidepressivos são largamente utilizados no tratamento sintomático do transtorno depressivo. Inúmeras pesquisas atuais sobre a depressão vêm contribuindo para o avanço da terapia farmacológica e para o surgimento de novos fármacos antidepressivos. Diretrizes atuais para testes de genotoxicidade de novos medicamentos sugerem a importante utilidade de ensaios que detectem danos ao DNA, ou seja, testes para avaliar a indução de quebras no DNA. Entretanto, o número escasso de dados sobre a genotoxicidade de fármacos faz com que seja reduzido o número de fármacos que realmente podem ser usados em segurança. Portanto, é de extrema importância estudos sobre a avaliação genotoxicológica de fármacos, principalmente, drogas utilizadas por um longo período de tempo como é o caso dos antidepressivos. A duloxetina é um antidepressivo novo, pertencente à classe dos inibidores seletivos da recaptação de serotonina e noradrenalina (ISRSN), utilizada no tratamento sintomático da depressão. Apesar da existência de trabalhos demonstrando que alguns fármacos antidepressivos são genotóxicos, não existe até hoje nenhum estudo sobre a possível genotoxicidade da duloxetina em células de origem humana. Assim, o presente estudo tem como objetivo explorar o possível potencial genotóxico in vitro da duloxetina em culturas primárias de linfócitos humanos através das técnicas de detecção de aberrações cromossômicas e micronúcleos. Culturas primárias de linfócitos sanguíneos de voluntários sadios foram expostas a diferentes concentrações de duloxetina (10-150 ng/ml) e ciclofosfamida (6 μg/ml) como controle positivo. Aberrações cromossômicas estruturais, índice mitótico, índice de divisão nuclear, índice de binucleação, número de células com um, dois, três e quatro micronúcleos e o número de células com pontes nucleoplasmáticas foram avaliadas. Todos os índices das culturas incubadas com duloxetina foram significativamente menores que aqueles dos grupos controles, indicando um certo grau de citotoxicidade da droga. Entretanto, só as concentrações de 100 e 150 ng/ml provocaram o aumento significativo da presença de aberrações cromossômicas e micronúcleos. Considerando que essas concentrações ficam perto do limite superior da faixa terapêutica da droga usada em humanos, nossos resultados alertam já sobre a necessidade de aprofundar no conhecimento da genotoxicidade humana da duloxetina.

Caracterização agronômica e morfológica de populações de milho

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Association among XRCC1, XRCC3, and BLHX gene polymorphisms and chromosome instability in lymphocytes from patients with endometriosis and ovarian cancer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Opinião de familiares sobre a internação de crianças em uma Unidade de Terapia Intensiva Pediátrica

A Pediatric Intensive care Unit (PICU) is an environment where care is provided to seriously ill children. Hospitalization is regarded as an unpleasant experience that requires adaptation and routine change. To assess the opinion of relatives of children hospitalized at a PICU concerning tie breakage and/or separation between children and their families. It is a descriptive, cross-sectional, quantitative study. A structured interview was conducted with the families of hospitalized children from July to September, 2010. The data were statistically analyzed. RESULTS: Twenty relatives were interviewed, 80% of whom believed that children’s behavior changes when they are present in the unit, and 85% considered the visitation time established to be sufficient. All the respondents reported to be satisfied about the care provided. The feelings prevailing in 50% of the relatives were fear and hope. Change in the family’s union after hospitalization occurred in 85% of the families. The most fearful aspect concerning the ICU is the equipment (25%), and the most worrisome, as regards personal life, is the separation from other children (65%). Health care professionals must pay more attention to relatives by including them in their health care plan so that the health care team and the family, who are essential in children’s recovery, can interact in a congenial fashion. It is also necessary to improve the knowledge related to that subject so that the health care team and families can work together towards children’s recovery

Otimização da estrutura metalica para um carro alegórico

Carnival is a unique opportunity for the associations demonstrate the community’s annual work and the float is a major component of this celebration, responsible for pitch the samba using allegories and carry important figures. The excess weight of the floats which are mostly manufactured from truck and bus structures requires larger amount of people to push the vehicle in addition to increased efforts on the steering systems, suspension and wheels, raising the probability of breakage and loss of one year work. The objective of this study is to use the concepts of strength of materials combined with computer simulation to obtain a structure that has the lowest possible weight without compromising the safety of transported components and that is also easy to manufacture, drive and store

Avaliação da usinagem do INCONEL 718

The nickel superalloys are known as being a material with poor machinability, they have some properties like high hardness, good resistance at high temperature, tendency to weld with the tool material at high temperature, etc. In the aerospace, biomedical and petrochemical industry, are increasing the need to use materials that resist to aggressive process and environment. In these uses, it has increased the use of nickel-based superalloys like Inconel 718 and consequently the need to research new techniques and tools to improve the machinability of this material. For the superalloys and resistant alloys at high temperatures is considered that the difficulty in the machining regards to the combination of the relatively high cutting forces and high temperatures that grow during the machine process, causing deformation or breakage of the cutting tool. This work purpose is to develop the study of the machining of external cylindrical turning of the nickel based alloy Inconel 718, using ceramic tools, seeking the optimization of machining this alloy, looking to provide real productive increases without the need of investments in new production means. The machining test were accomplished using commercials hard metal tools and the results were compared each other to find the best tool and the best parameter. The conclusion is that the tool TNMG160408-23 -class 1005- was the better one, when used with the parameter 60_15_08

Usinagem da liga de níquel inconel 718 com pastilhas de cerâmica

The machining of super alloys resistant to high temperatures such as nickel alloys, inconel 718 specifically, is a very difficult job to obtain improvements in the process, due to the difficulty of machining at high cutting speeds, the use of these alloys in industries showed great developments in recent years, its application in aeronautical industry spread being used in vane turbo, compressor parts, props and set elements. The automotive, chemical, medical and others also took advantage of the great features of inconel 718 and has used the material. The high temperature resistant alloys have high machining difficulty, a fact that is associated with high cutting forces generated during machining which result in high temperatures. High levels of temperatures can cause deterioration of the cutting edge, with subsequent deformation or breakage, wear most common obtained in machining such materials are flank wear the formation of built-up edge for cutting and notch wear. The experimental part of the work consists in machining of nickel-based alloy Inconel 718 heat treated for hardness, using a tool based ceramic silicon nitride Sandvik (Si3N4) in order to compare the best results obtained in the master's thesis of SANTOS (2010) who used a tool ceramics also the basis of silicon nitride which was developed in the doctoral thesis of SOUZA (2005). Assays were performed on a CNC lathe and was noted for each cutting edge results obtained. Tests were made starting from an initial condition of the tool with cutting speed of 200 m/min, feed 0.5 mm and 0.5 mm depth of cut was reduced cutting speed for the subsequent tests with the same conditions of feed and depth of cut. The tool presented wear instant under two 200 m/min and 100 m/min, premature rupture of 50 m/min and finally cut provided with difficulty... (Complete abstract click electronic access below)

Induction of mitotic and chromosomal abnormalities on Allium cepa cells by pesticides imidacloprid and sulfentrazone and the mixture of them

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

REML/BLUP para predição de valores genotípicos de topcrosses e seleção de testadores em milho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparation of Coated Microtools for Electrochemical Machining Applications

PREPARATION OF COATED MICROTOOLS FOR ELECTROCHEMICAL MACHINING APPLICATIONS Ajaya K. Swain, M.S. University of Nebraska, 2010 Advisor: K.P. Rajurkar Coated tools have improved the performance of both traditional and nontraditional machining processes and have resulted in higher material removal, better surface finish, and increased wear resistance. However, a study on the performance of coated tools in micromachining has not yet been adequately conducted. One possible reason is the difficulties associated with the preparation of coated microtools. Besides the technical requirement, economic and environmental aspects of the material and the coating technique used also play a significant role in coating microtools. This, in fact, restricts the range of coating materials and the type of coating process. Handling is another major issue in case of microtools purely because of their miniature size. This research focuses on the preparation of coated microtools for pulse electrochemical machining by electrodeposition. The motivation of this research is derived from the fact that although there were reports of improved machining by using insulating coatings on ECM tools, particularly in ECM drilling operations, not much literature was found relating to use of metallic coating materials in other ECM process types. An ideal ECM tool should be good thermal and electrical conductor, corrosion resistant, electrochemically stable, and stiff enough to withstand electrolyte pressure. Tungsten has almost all the properties desired in an ECM tool material except being electrochemically unstable. Tungsten can be oxidized during machining resulting in poor machining quality. Electrochemical stability of a tungsten ECM tool can be improved by electroplating it with nickel which has superior electrochemical resistance. Moreover, a tungsten tool can be coated in situ reducing the tool handling and breakage frequency. The tungsten microtool was electroplated with nickel with direct and pulse current. The effect of the various input parameters on the coating characteristics was studied and performance of the coated microtool was evaluated in pulse ECM. The coated tool removed more material (about 28%) than the uncoated tool under similar conditions and was more electrochemical stable. It was concluded that nickel coated tungsten microtool can improve the pulse ECM performance.

Prediction of apparent protein digestibility of ingredients and diets by in vitro pH-stat degree of protein hydrolysis with species-specific enzymes for juvenile Pacific white shrimp Litopenaeus vannamei

Aquafeed production faces global issues related to availability of feed ingredients. Feed manufacturers require greater flexibility in order to develop nutritional and cost-effective formulations that take into account nutrient content and availability of ingredients. The search for appropriate ingredients requires detailed screening of their potential nutritional value and variability at the industrial level. In vitro digestion of feedstuffs by enzymes extracted from the target species has been correlated with apparent protein digestibility (APD) in fish and shrimp species. The present study verified the relationship between APD and in vitro degree of protein hydrolysis (DH) with Litopenaeus vannamei hepatopancreas enzymes in several different ingredients (n = 26): blood meals, casein, corn gluten meal, crab meal, distiller`s dried grains with solubles, feather meal, fish meals, gelatin, krill meals, poultry by-product meal, soybean meals, squid meals and wheat gluten. The relationship between APD and DH was further verified in diets formulated with these ingredients at 30% inclusion into a reference diet. APD was determined in vivo (30.1 +/- 0.5 degrees C, 32.2 +/- 0.4%.) with juvenile L vannamei (9 to 12 g) after placement of test ingredients into a reference diet (35 g kg(-1) CP: 8.03 g kg(-1) lipid; 2.01 kcal g(-1)) with chromic oxide as the inert marker. In vitro DH was assessed in ingredients and diets with standardized hepatopancreas enzymes extracted from pond-reared shrimp. The DH of ingredients was determined under different assay conditions to check for the most suitable in vitro protocol for APD prediction: different batches of enzyme extracts (HPf5 or HPf6), temperatures (25 or 30 degrees C) and enzyme activity (azocasein): crude protein ratios (4 U: 80 mg CP or 4 U: 40 mg CP). DH was not affected by ingredient proximate composition. APD was significantly correlated to DH in regressions considering either ingredients or diets. The relationships between APD and DH of the ingredients could be suitably adjusted to a Rational Function (y = (a + bx)/(1 + cx + dx2), n = 26. Best in vitro APD predictions were obtained at 25 degrees C, 4 U: 80 mg CP both for ingredients (R(2) = 0.86: P = 0.001) and test diets (R(2) = 0.96; P = 0.007). The regression model including all 26 ingredients generated higher prediction residuals (i.e., predicted APD - determined APD) for corn gluten meal, feather meal. poultry by-product meal and krill flour. The remaining test ingredients presented mean prediction residuals of 3.5 points. A model including only ingredients with APD>80% showed higher prediction precision (R(2) = 0.98: P = 0.000004; n = 20) with average residual of 1.8 points. Predictive models including only ingredients from the same origin (e.g., marine-based, R(2) = 0.98; P = 0.033) also displayed low residuals. Since in vitro techniques have been usually validated through regressions against in vivo APD, the DH predictive capacity may depend on the consistency of the in vivo methodology. Regressions between APD and DH suggested a close relationship between peptide bond breakage by hepatopancreas digestive proteases and the apparent nitrogen assimilation in shrimp, and this may be a useful tool to provide rapid nutritional information. (C) 2009 Elsevier B.V. All rights reserved.

Analysis of energy dissipation in stirred suspension polymerisation reactors using computational fluid dynamics

This work evaluates the spatial distribution of normalised rates of droplet breakage and droplet coalescence in liquidliquid dispersions maintained in agitated tanks at operation conditions normally used to perform suspension polymerisation reactions. Particularly, simulations are performed with multiphase computational fluid dynamics (CFD) models to represent the flow field in liquidliquid styrene suspension polymerisation reactors for the first time. CFD tools are used first to compute the spatial distribution of the turbulent energy dissipation rates (e) inside the reaction vessel; afterwards, normalised rates of droplet breakage and particle coalescence are computed as functions of e. Surprisingly, multiphase simulations showed that the rates of energy dissipation can be very high near the free vortex surfaces, which has been completely neglected in previous works. The obtained results indicate the existence of extremely large energy dissipation gradients inside the vessel, so that particle breakage occurs primarily in very small regions that surround the impeller and the free vortex surface, while particle coalescence takes place in the liquid bulk. As a consequence, particle breakage should be regarded as an independent source term or a boundary phenomenon. Based on the obtained results, it can be very difficult to justify the use of isotropic assumptions to formulate particle population balances in similar systems, even when multiple compartment models are used to describe the fluid dynamic behaviour of the agitated vessel. (C) 2011 Canadian Society for Chemical Engineering