Right coronary artery fistula with congestive heart failure in the neonate. Doppler echocardiographic diagnosis and closure with detachable balloon

We report here a case of coronary artery fistula in a neonate with clinical signs of heart failure. The electrocardiogram showed signs of left ventricular hypertrophy and diffuse alterations in ventricular repolarization. Chest X-ray showed an enlargement of the cardiac silhouette with an increase in pulmonary flow. After echocardiographic diagnosis and angiographic confirmation, closure of the fistulous trajectory was performed with a detachable balloon with an early and late successful outcome.

A comparative analysis of primary stenting and optimal balloon coronary angioplasty in acute myocardial infarction. Six month results from the STENT PAMI trial

OBJECTIVE: To compare the outcome of balloon PTCA with final coronary stenosis diameter (SD) <=30%, with elective coronary stenting. METHODS: We performed a comparative analysis of the 6 month outcomes in patients treated with primary stenting and those who obtained an optimal balloon PTCA result treated during the first 12 hours of AMI onset included in the STENT PAMI randomized trial. RESULTS: The results were analysed into 3 groups: primary stenting (441 patients, SD=22±6%), optimal PTCA (245 patients), and nonoptimal PTCA (182 patients, SD= 37±5%). At the end of the 6 months primary stent group presented with the lowest restenosis(23 vs. 31 vs. 45%, p=0.001, respectively). Ischemia-driven target vessel revascularization rate (TVR) (7 vs. 15.5 vs. 19%, p=0.001, respectively). CONCLUSION: At the 6 month follow-up, primary stenting offered the lowest restenosis and ischemia-driven TVR rates. Compared to optimal balloon PTCA. Nonoptimal primary balloon PTCA pts (SD=31-50%), had the worst late angiographic outcomes and should be treated more actively with coronary stent implantation.

Influence of the echocardiographic score and not of the previous surgical mitral commissurotomy on the outcome of percutaneous mitral balloon valvuloplasty

OBJECTIVE: To evaluate prior mitral surgical commissurotomy and echocardiographic score influence on the outcomes and complications of percutaneous mitral balloon valvuloplasty. METHODS: We performed 459 complete mitral valvuloplasty procedures. Four hundred thirteen were primary valvuloplasty and 46 were in patients who had undergone prior surgical commissurotomy. The prior commissurotomy group was older, had higher echo scores, and a tendency toward a higher percentage of atrial fibrillation. RESULTS: When the groups were compared with each other, no differences were found in pre- and postprocedure mean pulmonary artery pressure, mean mitral gradient, mitral valve area, and mitral regurgitation . Because we found no significant differences, we subdivided the entire group based on echo scores, those with echo scores <=8 and those with echo scores >8 the mitral valve area being higher in the <=8 echo score group 2.06±0.42 versus 1.90±0.40cm² (p=0.0090) in the >8 echo score group. CONCLUSION: Dividing the groups based on echo score revealed that the higher echo score group had smaller mitral valve areas postvalvuloplasty.

The use of primary stenting or balloon percutaneous transluminal coronary angioplasty for the treatment of acutely occluded saphenous vein grafts. Results from the Brazilian National Registry - CENIC

OBJECTIVE: We conducted a comparative analysis of the in-hospital outcomes of patients who underwent primary percutaneous transluminal angioplasty (PTCA) or stent implantation because of an acute myocardial infarction (AMI) related to an acute vein graft occlusion. METHODS: Since 1991 the Brazilian Society of Hemodynamic and Interventional Cardiology has maintained a large database (CENIC). From these, we selected all consecutive patients, who underwent primary PTCA or stenting in the first 24 hours of AMI, with the target vessel being an occluded vein graft. Immediate results and major coronary events occurring up until hospital discharge were analyzed. RESULTS: During this period, 5,932 patients underwent primary PTCA or stenting; 158 (3%) of the procedures were performed because of an acute vein graft occlusion. Stenting was performed in 74 (47%) patients. Patients treated with stents had a higher success rate and lower mean residual stenosis compared with those who underwent primary balloon PTCA. The incidence of reinfarction and death were similar for stenting and balloon PTCA. CONCLUSION: Primary percutaneous treatment of AMI related to acute vein graft occlusion is still an uncommon practice. Primary stenting improved luminal diameter and offered higher rates of success; however, this strategy did not reduce the in-hospital reinfarction and death rate, compared with that occurring with PTCA treatment.

Influence of balloon pressure inflation in patients undergoing primary coronary stent implantation during acute myocardial infarction: a quantitative coronary angiography analysis

OBJECTIVE:To verify the influence of moderate- or high-pressure balloon inflation during primary coronary stent implantation for acute myocardial infarction. METHODS: After successful coronary stent implantation, 82 patients were divided into 2 groups according to the last balloon inflation pressure: group 1 (³12 to <16 atm) and group 2 (³16 to 20 atm), each with 41 cases. All patients underwent late coronary angiography. RESULTS: In group 1, the mean stent deployment pressure was 13.58±0.92 atm, and in the group 2 it was 18.15±1.66 atm. Stents implanted with moderate pressures (³12 to <16 atm) had a significantly smaller postprocedural minimal lumen diameter, compared to with those with higher pressure, with lesser acute gain (2.7± 0.4 mm vs 2.9±04 mm; p=0.004), but the late lumen loss (0,9±0,8 mm vs 0,9±0,6 mm) and the restenosis (22% vs. 17.1%) and target-vessel revascularization rates (9.8% vs 7.3%) were similar between the groups. CONCLUSION: During AMI stenting, the use of high pressures (³16 atm) did not cause a measurable improvement in late outcome, either in the late loss, its index, and the net gain, or in clinical and angiographic restenosis rates.

Short- and midterm follow-up results of valvuloplasty with balloon catheter for congenital aortic stenosis

OBJECTIVE: To report short and midtem follow-up results of balloon aortic valvuloplasty to treat congenital aortic stenosis. METHODS: Seventy-five patients (median age: 8 years) underwent the procedure through the retrograde femoral or carotid route. RESULTS: The procedure was completed in 74 patients (98.6%). The peak-to-peak systolic gradient dropped from 79.6±27.7 to 22.3±17.8 mmHg (P<0.001), the left ventricular systolic pressure dropped from 164±39.1 to 110±24.8 mmHg (P<0.001), and the left ventricular end diastolic pressure dropped from 13.3±5.5 to 8.5±8.3 mmHg (P< 0.01). Four patients (5.3%) died due to the procedure. Aortic regurgitation (AoR) appeared or worsened in 27/71 (38%) patients, and no immediate surgical intervention was required. A mean follow-up of 50±38 months was obtained in 37 patients. Restenosis and significant AoR were observed in 16.6% of the patients. The estimates for being restenosis-free and for having significant AoR in 90 months were 60% and 50%, respectively. CONCLUSION: Aortic valvuloplasty was considered the initial palliative method of choice in managing congenital aortic stenosis, with satisfactory short- and midterm results.

Tecnología de igy anti-escherichia coli aplicada mediante nanotubos sobre cultivos de enterocitos porcinos. Anti- escherichia coli igy technology applied through nanotubes on porcine enterocyte cultures.

La diarrea neonatal representa uno de los problemas sanitarios de mayor relevancia en las primeras semanas de vida del cerdo. Provoca importantes pérdidas económicas por morbilidad y mortalidad. El cultivo de enterocitos primarios representa una herramienta valiosa para el estudio de patologías causadas por agentes infecciosos que afectan la integridad del epitelio intestinal. La producción de anticuerpos extraídos a partir de la yema de huevo de gallinas inmunizadas (IgY), es una tecnología innovadora, que ha mostrado ser protectiva contra diarreas causadas por agentes víricos y bacterianos. La nanotecnología permite mejorar la eficiencia en la administración de distintas drogas. Los nanotubos de carbono han ganado una enorme popularidad por sus propiedades y aplicaciones únicas. La investigación sobre los aspectos toxicológicos de estas nanopartículas es escasa. Una vez dentro de la célula, las nanopartículas pueden inducir estrés oxidativo intracelular por perturbar el equilibrio oxidativo. Las hipótesis de trabajo es: La administración de IgY anti-Escherichia coli a través de nanotubos protegerá in vitro e in vivo a los enterocitos de una infección por E. coli previniendo la diarrea neonatal porcina. Los objetivos del trabajo son: Evaluar la protección por un anticuerpo aviario IgY anti-E. coli aplicado mediante nanotubos de carbono a cultivo de enterocitos porcinos primarios sometidos a una post-infección con E. coli; Analizar los efectos secundarios de los nanotubos con IgY anti-E coli en la citotoxicidad, el balance oxidativo y la apoptosis de los enterocitos porcinos cultivados in vitro y Evaluar la acción terapeútica de la IgY anti-E coli aplicada a porcinos y efectos secundarios de la administración con nanotubos. Se implementará un diseño experimental in vitro con diferentes grupos de cultivos con nanotubos, con IgY anti-E. coli e inespecifica y con exposición a E. coli. Se realizará cultivo de enterocitos porcinos primarios con una técnica de disgregación enzimática con colagenasa según protocolo de Bader et al. (2000). Se evaluará la viabilidad por la prueba de azul tripan. Para la obtención del anticuerpo anti-E. coli aviario se aplicarán un total de 3 dosis de E. coli (109 UFC/ml de adyuvante) a gallinas Legorhn en condiciones fisiológicas. Se recolectarán los huevos diariamente. Se purificará la IgY según método de Polson et al. (1985) utilizando PEG 6000. La concentración de IgY se medirá por ELISA de alta sensibilidad. La IgY será incorporada a nanotubos según protocolo de Acevedo et al. 2006. Para analizar los posibles efectos secundarios de los nanotubos se evaluará: 1. Citotoxicidad por técnica de MTT 2. Estrés oxidativo por técnica de TBARS y 3. Apoptosis por técnica de TUNEL.Además, se implementará un diseño experimental in vivo para probar la acción terapeútica de este nutraceútico aplicados a lechones destetados y los efectos secundarios de la administración con nanotubos. Se realizará un cultivo de enterocitos de lechones que previamente fueron tratados con la IgY anti-E. coli administrada mediante nanotubos y efectuarán las técnicas descriptas anteriormente. Los resultados esperados son: Elaboración de un Ac aviario IgY anti-E. coli para prevenir infección de enterocitos, Profundización en el conocimiento acerca de los efectos citotóxicos de los nanotubos de carbono multilamelares, Generación de tratamiento alternativo para enfermedades entéricas porcinas.

Training and development in Irish technology companies

The sustained economic growth that has been experienced in the Irish economy in recent years has relied, to a large extent, on the contribution and performance of those industry sectors that possess the ability to provide high-value-added products and services to domestic and international markets. One such contributor has been the Technology sector. However, the performance of this sector relies upon the availability of the necessary capabilities and competencies for Technology companies to remain competitive. The Expert Group on Future Skills Needs have forecasted future skills shortages in this sector. The purpose of this research has been to examine the extent to which Irish Technology companies are taking measures to meet changing skills requirements, through training and development interventions. Survey research methods (in the form of a mail questionnaire, supported by a Web-based questionnaire) have been used to collect information on the expenditure on, and approach to, training and development in these companies, in addition to the methods, techniques and tools/aids that are used to support the delivery of these activities. The contribution of Government intervention has also been examined. The conclusions have been varied. When the activities of the responding companies are considered in isolation, the picture to emerge is primarily positive. Although the expenditure on training and development is slightly lower than that indicated in previous studies, the results vary by company size. Technical employees are clearly the key focus of training provision, while Senior Managers and Directors, Clerical and Administrative staff and Manual workers are a great deal more neglected in training provision. Expenditure on, and use of, computer-based training methods is high, as is the use of most of the specified techniques for facilitating learning. However, when one considers the extent to which external support (in the form of Government interventions and cooperation with other companies and with education and training providers) is integrated into the overall training practices of these companies, significant gaps in practice are identified. The thesis concludes by providing a framework to guide future training and development practices in the Technology sector.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Technique and clinical applications of double balloon enteroscopy for the evaluation of small bowel diseases

Magdeburg, Univ., Med. Fak., Diss., 2012

Reptiles collected in Salvador for the California Institute of Technology, by Karl P. Schmidt.

v.12:no.16(1928)

National Aquaculture Development Plan / prepared by the Joint Subcommittee on Aquaculture of the Federal Coordinating Council on Science, Engineering and Technology.

1