Pristine Early Eocene Wood Buried Deeply in Kimberlite from Northern Canada

We report exceptional preservation of fossil wood buried deeply in a kimberlite pipe that intruded northwestern Canada's Slave Province 53.3±0.6 million years ago (Ma), revealed during excavation of diamond source rock. The wood originated from forest surrounding the eruption zone and collapsed into the diatreme before resettling in volcaniclastic kimberlite to depths >300 m, where it was mummified in a sterile environment. Anatomy of the unpermineralized wood permits conclusive identification to the genus Metasequoia (Cupressaceae). The wood yields genuine cellulose and occluded amber, both of which have been characterized spectroscopically and isotopically. From cellulose d O and d H measurements, we infer that Early Eocene paleoclimates in the western Canadian subarctic were 12-17°C warmer and four times wetter than present. Canadian kimberlites offer Lagerstätte-quality preservation of wood from a region with limited alternate sources of paleobotanical information. © 2012 Wolfe et al.

Temperature and water potential relations of tropical Trametes and other wood-decay fungi from the indigenous forests of Zimbabwe

Three isolates each, of nine different Trametes and five other wood inhabiting basidiomycetes, were collected from the indigenous forests of Zimbabwe, and the impact of temperature (20-60 degrees C), osmotic and matric potential (-0.5 to - 8.0 MPa), and their interactions on in vitro growth compared. Generally, there was no significant difference between growth of isolates of the same species in relation to temperature. Temperature relationships of the species studied correlated well with their geographic distributions. Species occurring in hot, dry regions tolerated a wide temperature range, with some showing unusually high thermotolerance (55 degrees, T. socotrana, T. cingulata and T. cervina). There were significant intra-strain differences for individual species in relation to solute potential on glycerol-modified media. Generally, growth of ail species was better on glycerol- and KCl-modified osmotic media than on a metrically-modified medium (PEG 8000) at 25, 30 and 37 degrees. The limits for growth on the osmotic media were significantly wider than matric medium, being - 4.5 to - 5.0 and - 2.5 to - 4.5 MPa, respectively. An Irpex sp. grew at lower water potentials than all other species, with good growth at - 7.0 MPa. This study suggests that the capacity of these fungi for effective growth over a range of temperatures, osmotic and matric potentials contributes to their rapid wood decay capacities in tropical climates.

Wood degradation, and cellulase and ligninase production, by Trametes and other wood-inhabiting basidiomycetes from indigenous forests of Zimbabwe

Nine species of Trametes and five other wood inhabiting basidiomycetes, were collected from the indigenous forests of Zimbabwe and analysed for cellulases, ligninases, extracellular phenolases and wood degrading ability for the first time. Cellulase enzyme activities varied widely among the species. After 15 d growth exo-glucanase activity had increased in the majority of species whilst Biter paper activity showed the opposite trend, being greatly reduced in all species on day 15 compared to day IO. Endo-glucanase activity was relatively uniform at both sampling times. The fungi were more active against water soluble cellulose derivatives than filter paper cellulase. In all the fungi tested, cellulose activity on filter paper was significantly less than endo- and exo-glucanase activities. The highest cellulase activity was expressed by Cerrena meyenii (683 U mg(-1)) Phaeotrametes decipiens, Trametes modesta, and T. pocas also expressed relatively high cellulase activity on all types of cellulose tested. All Trametes species tested positive for extracellular phenol oxidases whilst Fomotopsis spragueii and Irpex stereoides tested negative. Ail but one of the Trametes species in the study were able to degrade two different lignin preparations in tests for lignin degradation. T. menziesii was unable to degrade both lignin preparations although it had tested positive for production of extracellular oxidase. The species in this study degraded hardwood to a greater extent than softwood. Eight of them caused more than 80% dry weight loss of wood blocks during 70 d incubation. Those fungi that expressed high cellulase activity also caused high weight loss on wood.

Dilute phosphoric acid-catalysed hydrolysis of municipal bio-waste wood shavings using autoclave parr reactor system

The visibility of using municipal bio-waste, wood shavings, as a potential feedstock for ethanol production was investigated. Dilute acid hydrolysis of wood shavings with H3PO4 was undertaken in autoclave parr reactor. A combined severity factor (CSF) was used to integrate the effects of hydrolysis times, temperature and acid concentration into a single variable. Xylose concentration reached a maximum value of 17 g/100 g dry mass corresponding to a yield of 100% at the best identified conditions of 2.5 wt.% H3PO4, 175 degrees C and 10 min reaction time corresponding to a CSF of 1.9. However, for glucose, an average yield of 30% was obtained at 5 wt.% H3PO4, 200 degrees C and 10 min. Xylose production increased with increasing temperature and acid concentration, but its transformation to the degradation product furfural was also catalysed by those factors. The maximum furfural formed was 3 g/100 g dry mass, corresponding to the 24% yield. (C) 2011 Elsevier Ltd. All rights reserved.

Long-term mass balance of perennial firn and ice in an Alpine cave (Austria):Constraints from radiocarbon-dated wood fragments

Hundsalm ice cave located at 1520 m altitude in a karst region of western Austria contains up to 7-m-thick deposits of snow, firn and congelation ice. Wood fragments exposed in the lower parts of an ice and firn wall were radiocarbon accelerator mass spectrometry (AMS) dated. Although the local stratigraphy is complex, the 19 individual dates - the largest currently available radiocarbon dataset for an Alpine ice cave - allow to place constraints on the accumulation and ablation history of the cave ice. Most of the cave was either ice free or contained only a small firn and ice body during the 'Roman Warm Period'; dates of three wood fragments mark the onset of firn and ice build-up in the 6th and 7th century ad. In the central part of the cave, the oldest samples date back to the 13th century and record ice growth coeval with the onset of the 'Little Ice Age'. The majority of the ice and firn deposit, albeit compromised by a disturbed stratigraphy, appears to have been formed during the subsequent centuries, supported by wood samples from the 15th to the 17th century. The oldest wood remains found so far inside the ice is from the end of the Bronze Age and implies that local relics of prehistoric ice may be preserved in this cave. The wood record from Hundsalm ice cave shows parallels to the Alpine glacier history of the last three millennia, for example, the lack of preserved wood remains during periods of known glacier minima, and underscores the potential of firn and ice in karst cavities as a long-term palaeoclimate archive, which has been degrading at an alarming rate in recent years. © The Author(s) 2013.

The dynamics of murid gammaherpesvirus 4 within wild, sympatric populations of bank voles and wood mice

Murid gammaherpesvirus 4 (MuHV-4) is widely used as a small animal model for understanding gammaherpesvirus infections in man. However, there have been no epidemiological studies of the virus in wild populations of small mammals. As MuHV-4 both infects cells associated with the respiratory and immune systems and attempts to evade immune control via various molecular mechanisms, infection may reduce immunocompetence with potentially serious fitness consequences for individuals. Here we report a longitudinal study of antibody to MuHV-4 in a mixed assemblage of bank voles (Clethrionomys glareolus) and wood mice (Apodemus sylvaticus) in the UK. The study was conducted between April 2001 and March 2004. Seroprevalence was higher in wood mice than bank voles, supporting earlier work that suggested wood mice were the major host even though the virus was originally isolated from a bank vole. Analyses of both the probability of having antibodies and the probability of initial seroconversion indicated no clear seasonal pattern or relationship with host density. Instead, infection risk was most closely associated with individual characteristics, with heavier males having the highest risk. This may reflect individual variation in susceptibility, potentially related to variability in the ability to mount an effective immune response.

A rapid staining-assisted wood sampling method for PCR-based detection of pine wood nematode Bursaphelenchus xylophilus in Pinus massoniana wood tissue

For reasons of unequal distribution of more than one nematode species in wood, and limited availability of wood samples required for the PCR-based method for detecting pinewood nematodes in wood tissue of Pinus massoniana, a rapid staining-assisted wood sampling method aiding PCR-based detection of the pine wood nematode Bursaphelenchus xylophilus (Bx) in small wood samples of P. massoniana was developed in this study. This comprised a series of new techniques: sampling, mass estimations of nematodes using staining techniques, and lowest limit Bx nematode mass determination for PCR detection. The procedure was undertaken on three adjoining 5-mg wood cross-sections, of 0.5 · 0.5 · 0.015 cm dimension, that were cut from a wood sample of 0.5 · 0.5 · 0.5 cm initially, then the larger wood sample was stained by acid fuchsin, from which two 5-mg wood cross-sections (that adjoined the three 5-mg wood cross-sections, mentioned above) were cut. Nematode-staining-spots (NSSs) in each of the two stained sections were counted under a microscope at 100· magnification. If there were eight or more NSSs present, the adjoining three sections were used for PCR assays. The B. xylophilus – specific amplicon of 403 bp (DQ855275) was generated by PCR assay from 100.00% of 5-mg wood cross-sections that contained more than eight Bx NSSs by the PCR assay. The entire sampling procedure took only 10 min indicating that it is suitable for the fast estimation of nematode numbers in the wood of P. massonina as the prelimary sample selections for other more expensive Bx-detection methods such as PCR assay.

The Pine Wood Nematode: a personal view

The first report of the disease (“pine wilt disease”) associated with the pinewood nematode, goes back to 1905, when Yano reported an unusual decline of pines from Nagasaki. For a long time thereafter, the cause of he disease was sought, but without success. Because of the large number of insect species that were usually seen around and on infected trees, it had always been assumed that the causal agent would prove to be one of these. However, in 1971, Kiyohara and Tokushike found a nematode of the genus Bursaphelenchus in infected trees. The nematode found was multiplied on fungal culture, inoculated into healthy trees and then re-isolated from the resulting wilted trees. The subsequent published reports were impressive: this Bursaphelenchus species could kill fully-grown trees within a few months in the warmer areas of Japan, and could destroy complete forests of susceptible pine species within a few years. Pinus densiflora, P. thunbergii und P. luchuensis were particularly affected. In 1972, Mamiya and Kiyohara described the new species of nematode extracted from the wood of diseased pines; it was a named Bursaphelenchus lignicolus. Since 1975, the species has spread to the north of Japan, with the exception of the most northerly prefectures. In 1977, the loss of wood in the west of the country reached 80%. Probably as a result of unusually high summer temperatures and reduced rainfall in the years 1978 and 1979, the losses were more than 2 million m3 per year. From the beginning, B. lignicolus was always considered by Japanese scientists to be an exotic pest. But where did it come from? That this nematode could also cause damage in the USA became clear in 1979 when B. lignicolus was isolated in great numbers from wood of a 39 year-old pine tree (Pinus nigra) in Missouri which had suddenly died after the colour of its needles changed to a reddish-brown colour (Dropkin und Foudin, 2 1979). In 1981, B. lignicolus was synonymised by Nickle et al. with B. xylophilus which had been found for the first time in the USA as far back as 1929, and reported by Steiner and Buhrer in 1934. It had originally been named Aphelenchoides xylophilus, the wood-inhabiting Aphelenchoides but was recognised by Nickle, in 1970,to belong in the genus Bursaphelenchus. Its common name in the USA was the "pine wood nematode" (PWN. After its detection in Missouri, it became known that B. xylophilus was widespread throughout the USA and Canada. It occurred there on native species of conifers where, as a rule, it did not show the symptoms of pine wilt disease unless susceptible species were stressed eg., by high temperature. This fact was an illuminating piece of evidence that North America could be the homeland of PWN. Dwinell (1993) later reported the presence of B. xylophilus in Mexico. The main vector of the PWN in Japan was shown to be the long-horned beetle Monochamus alternatus, belonging to the family Cerambycidae. This beetle lays its eggs in dead or dying trees where the developing larvae then feed in the cambium layer. It was already known in Japan in the 19th century but in the 1930s, it was said to be present in most areas of Japan, but was generally uncommon. However, with the spread of the pine wilt disease, and the resulting increase of weakened trees that could act as breeding sites for beetles, the populations of Monochamus spp. increased significantly In North America, other Monochamus species transmit PWN, and the main vector is M. carolinensis. In Japan, there are also other, less efficient vectors in the genus Monochamus. Possibly, all Monochamus species that breed in conifers can transmit the PWN. The occasional transmission by less efficient species of Monochamus or by some of the many other beetle genera in the bark or wood is of little significance. In Europe, M. galloprovincialis and M. sutor transmits the closely related species B. mucronatus. Some speculate that these two insect species are “standing by” and waiting for the arrival of B. xylophilus. In 1982, the nematode was detected and China. It was first found in dead pines near the Zhongshan Monument of Nanjing (CHENG et. al. 1983); 265 trees were then killed by pine wilt disease. Despite great efforts at eradication in China, the nematode spread further and pine wilt disease has been 3 reported from parts of the provinces of Jiangsu, Anhui, Guangdong, Shandong, Zhejiang and Hubei (YANG, 2003). In 1986, the spread of the PWN to Taiwan was discovered and in 1989, the nematode was reported to be present in the Republic of Korea where it had first been detected in Pinus thunbergii and P. densiflora. It was though to have been introduced with packing material from Japan. PWN was advancing. In 1984, B. xylophilus was found in wood chips imported into Finland from the USA and Canada, and this was the impetus to establish phytosanitary measures to prevent any possible spread into Europe. Finland prohibited the import of coniferous wood chips from these sources, and the other Nordic countries soon followed suit. EPPO (the European and Mediterranean Plant Protection Organization) made a recommendation to its member countries in 1986 to refuse wood imports from infested countries. With its Directive of 1989 (77/93 EEC), the European Community (later called the European Union or EU) recognised the potential danger of B. xylophilus for European forests and imposed restrictions on imports into the Europe. PWN was placed on the quarantine list of the EU and also of other European countries. Later, in 1991, a dispensation was allowed by the Commission of the EU(92/13 EEC) for coniferous wood from North America provided that certain specified requirements were fulfilled that would prevent introduction.

Hygrothermal performance of wood-hemp insulation in timber frame wall panels with and without a vapour barrier

An in situ experiment on a full-scale timber frame test building was carried out to study the hygrothermal performance of wood-hemp composite insulation in timber frame wall panels with and without a vapour barrier. The heat transfer properties and the likelihood of mould growth and condensation in the panels were compared. Step changes in the internal relative humidity were performed to explore the effects of high, normal and low internal moisture loads on the wall panels. No significant difference in the average equivalent thermal transmittance (U-values) between the panels with and without a vapour barrier was observed. The average equivalent U-values of the panels were close to the U-values calculated from the manufacturers’ declared thermal conductivity values of the insulation. The likelihood of condensation was higher at the interface of the wood-hemp insulation and the oriented strand board (OSB) in the panel without a vapour barrier. In terms of the parametric assessment of the mould germination potential, the relative humidity, the temperature and the exposure conditions in the insulation-OSB interfaces of the panel without a vapour barrier were found to be more favourable to the germination of mould spores. Nonetheless, when the insulations were dismantled, no mould was visually detected.

Experimental and numerical evaluation of composite repairs on wood beams damaged by cross-graining

An experimental and Finite Element study was performed on the bending behaviour of wood beams of the Pinus Pinaster species repaired with adhesively-bonded carbon–epoxy patches, after sustaining damage by cross-grain failure. This damage is characterized by crack growth at a small angle to the beams longitudinal axis, due to misalignment between the wood fibres and the beam axis. Cross-grain failure can occur in large-scale in a wood member when trees that have grown spirally or with a pronounced taper are cut for lumber. Three patch lengths were tested. The simulations include the possibility of cohesive fracture of the adhesive layer, failure within the wood beam in two propagation planes and patch interlaminar failure, by the use of cohesive zone modelling. The respective cohesive properties were estimated either by an inverse method or from the literature. The comparison with the tests allowed the validation of the proposed methodology, opening a good perspective for the reduction of costs in the design stages of these repairs due to extensive experimentation.

Experimental Reinforcement of Wood Beams

Rehabilitation is becoming more and more usual in the construction sector in Portugal. The introduction of newer construction materials and technical know-how of integrating different materials for achieving desired engineering goals is an important step to the development of the sector. Wood industry is also getting more and more adapted to composite technologies with the introduction of the so called “highly engineered wood products” and with the use of modification treatments. This work is an attempt to explain the viability of using stainless steel and glass fibre reinforced polymer (GFRP) as reinforcements in wood beams. This thesis specifically focuses on the flexural behaviour of Portuguese Pine unmodified and modified wood beams. Two types of modification were used: 1,3-dimethylol-4,5- dihydroxyethyleneurea (DMDHEU) resin and amid wax. The behaviour of the material was analysed with a nonlinear model. The latter model simulates the behaviour of the reinforced wood beams under flexural loading. Small-scale beams (1:15) were experimented in flexural bending and the experimental results obtained were compared with the analytical model results. The experiments confirm the viability of the reinforcing schemes and the working procedures. Experimental results showed fair agreement with the nonlinear model. A strength increase between 15% and 80% was achieved. Stiffness increased by 40% to 50% in beams reinforced with steel but no significant increase was achieved with the glass fibre reinforcement.

Enhancement of ultrafiltration process by pretreatment in recovery of hemicelluloses from wood extracts

Hemicelluloses are potential raw material for several items produced in future wood-based biorefineries. One possible method for recovering hemicelluloses from wood extracts is ultrafiltration (UF). However, low filtration capacities and severe fouling restrict the use of tight UF membranes in the treatment of wood extracts. The lack of suitable commercial membranes creates a need for pretreatment which would decrease fouling and increase the filtration capacity. This thesis focuses on the evaluation of the possibility to improve the filtration capacity and decrease fouling with the pretreatment of wood extracts. Methods which remove harmful compounds and methods which degrade them are studied, as well as combinations of the methods. The tested pretreatments have an influence on both the concentration of different compounds and the molecular mass distribution of the compounds in the extract. This study revealed that in addition to which kind of compounds were removed, also the change in molecular size distribution affected the filtration capacity significantly. It was shown that the most harmful compounds for the filtration capacity of the hydrophobic 5 kDa membrane were the ones capable of permeating the membrane and fouling also the inner membrane structure. Naturally, the size of the most harmful compounds depends on the used UF membrane and is thus case-specific. However, in the choice of the pretreatment method, the focus should be on the removal of harmful compound sizes rather than merely on the total amount of removed foulants. The results proved that filtration capacity can be increased with both adsorptive and oxidative pretreatments even by hundreds of per cents. For instance, the use of XAD7 and XAD16 adsorbents increased the average flux in the UF of a birch extract from nearly zero to 107 kg/(m2h) and 175 kg/(m2h), respectively. In the treatment of a spruce extract, oxidation by pulsed corona discharge (PCD) increased the flux in UF from 46 kg/(m2h) to 158 kg/(m2h). Moreover, when a birch extract batch was treated with laccase enzyme, the flux in UF increased from 15 kg/(m2h) to 36 kg/(m2h). However, fouling was decreased only by adsorptive pretreatment while oxidative methods had a negligible or even negative impact on it. This demonstrates that filtration capacity and fouling are affected by different compounds and mechanisms. The results of this thesis show that filtration capacity can be improved and fouling decreased through appropriate pretreatment. However, the choice of the best possible pretreatment is case-specific and depends on the wood extract and the membrane used. Finding the best option requires information on the extract content and membrane characteristics as well as on the filtration performance of the membrane in the prevailing conditions and a multivariate approach. On the basis of this study, it can be roughly concluded that adsorptive pretreatment improves the filtration capacity and decreases fouling rather reliably, but it may lead to significant hemicellulose losses. Oxidation reduces the loss of valuable hemicelluloses and could improve the filtration capacity, but fouling challenges may remain. Combining oxidation with adsorptive pretreatment was not a solution for avoiding hemicellulose losses in the tested cases.