Estimates of genetic parameters for growth and wood properties in Eucalyptus pellita F. Muell. to support tree breeding in Vietnam

Key message Eucalyptus pellita demonstrated good growth and wood quality traits in this study, with young plantation grown timber being suitable for both solid and pulp wood products. All traits examined were under moderate levels of genetic control with little genotype by environment interaction when grown on two contrasting sites in Vietnam. Context Eucalyptus pellita currently has a significant role in reforestation in the tropics. Research to support expanded of use of this species is needed: particularly, research to better understand the genetic control of key traits will facilitate the development of genetically improved planting stock. Aims This study aimed to provide estimates of the heritability of diameter at breast height over bark, wood basic density, Kraft pulp yield, modulus of elasticity and microfibril angle, and the genetic correlations among these traits, and understand the importance of genotype by environment interactions in Vietnam. Methods Data for diameter and wood properties were collected from two 10-year-old, open-pollinated progeny trials of E. pellita in Vietnam that evaluated 104 families from six native range and three orchard sources. Wood properties were estimated from wood samples using near-infrared (NIR) spectroscopy. Data were analysed using mixed linear models to estimate genetic parameters (heritability, proportion of variance between seed sources and genetic correlations). Results Variation among the nine sources was small compared to additive variance. Narrow-sense heritability and genetic correlation estimates indicated that simultaneous improvements in most traits could be achieved from selection among and within families as the genetic correlations among traits were either favourable or close to zero. Type B genetic correlations approached one for all traits suggesting that genotype by environment interactions were of little importance. These results support a breeding strategy utilizing a single breeding population advanced by selecting the best individuals across all seed sources. Conclusion Both growth and wood properties have been evaluated. Multi-trait selection for growth and wood property traits will lead to more productive populations of E. pellita both with improved productivity and improved timber and pulp properties.

Stable expression of silencing-suppressor protein enhances the performance and longevity of an engineered metabolic pathway

Transgenic engineering of plants is important in both basic and applied research. However, the expression of a transgene can dwindle over time as the plant's small (s)RNA-guided silencing pathways shut it down. The silencing pathways have evolved as antiviral defence mechanisms, and viruses have co-evolved viral silencing-suppressor proteins (VSPs) to block them. Therefore, VSPs have been routinely used alongside desired transgene constructs to enhance their expression in transient assays. However, constitutive, stable expression of a VSP in a plant usually causes pronounced developmental abnormalities, as their actions interfere with endogenous microRNA-regulated processes, and has largely precluded the use of VSPs as an aid to stable transgene expression. In an attempt to avoid the deleterious effects but obtain the enhancing effect, a number of different VSPs were expressed exclusively in the seeds of Arabidopsis thaliana alongside a three-step transgenic pathway for the synthesis of arachidonic acid (AA), an ω-6 long chain polyunsaturated fatty acid. Results from independent transgenic events, maintained for four generations, showed that the VSP-AA-transformed plants were developmentally normal, apart from minor phenotypes at the cotyledon stage, and could produce 40% more AA than plants transformed with the AA transgene cassette alone. Intriguingly, a geminivirus VSP, V2, was constitutively expressed without causing developmental defects, as it acts on the siRNA amplification step that is not part of the miRNA pathway, and gave strong transgene enhancement. These results demonstrate that VSP expression can be used to protect and enhance stable transgene performance and has significant biotechnological application.

Contract with John Moore for building house on Mill Street

Digital image

Native Phloem and Wood Borers in Australian Mediterranean Forest Trees

Native Mediterranean forests in Australia are dominated by two tree genera, Eucalyptus and Acacia, while Pinus and Eucalyptus dominate plantation forestry. In native forests, there is a high diversity of phloem and wood borers across several families in the Coleoptera and Lepidoptera. In the Coleoptera, cerambycid beetles (Cerambycidae), jewel beetles (Buprestidae), bark, ambrosia and pinhole beetles (Curculionidae) and pinworms (Lymexelidae) are some of the most commonly found beetles attacking eucalypts and acacias. In the Lepidoptera, wood moths (Cossidae), ghost moths (Hepialidae) and borers in the Xyloryctidae (subfamily Xyloryctinae) are most common. In contrast to native forests, there is a much more limited range of native insects present in Australian plantations, particularly in exotic Pinus spp. plantations, although eucalypt plantations do share some borers in common with native forests. This chapter reviews the importance of these borers in Australian forests primarily from an economic perspective (i.e. those species that cause damage to commercial tree species) and highlights a paucity of native forest species that commonly kill trees relative to the large scales regularly seen in North America and Europe.

Warrant to pay John Moore for building house on Mill Street

Digital image

An Investigation of Environmental Conditions Experienced During the Life of High Value Wood Components and Products

Australian forest industries have a long history of export trade of a wide range of products from woodchips(for paper manufacturing), sandalwood (essential oils, carving and incense) to high value musical instruments, flooring and outdoor furniture. For the high value group, fluctuating environmental conditions brought on by changes in mperature and relative humidity, can lead to performance problems due to consequential swelling, shrinkage and/or distortion of the wood elements. A survey determined the types of value-added products exported, including species and dimensions packaging used and export markets. Data loggers were installed with shipments to monitor temperature and relative humidity conditions. These data were converted to timber equilibrium moisture content values to provide an indication of the environment that the wood elements would be acclimatising to. The results of the initial survey indicated that primary high value wood export products included guitars, flooring, decking and outdoor furniture. The destination markets were mainly located in the northern hemisphere, particularly the United States of America, China, Hong Kong, Europe including the United Kingdom), Japan, Korea and the Middle East. Other regions importing Australian-made wooden articles were south-east Asia, New Zealand and South Africa. Different timber species have differing rates of swelling and shrinkage, so the types of timber were also recorded during the survey. Results from this work determined that the major species were ash-type eucalypts from south-eastern Australia (commonly referred to in the market as Tasmanian oak), jarrah from Western Australia, spotted gum, hoop pine, white cypress, black butt, brush box and Sydney blue gum from Queensland and New South Wales. The environmental conditions data indicated that microclimates in shipping containers can fluctuate extensively during shipping. Conditions at the time of manufacturing were usually between 10 and 12% equilibrium moisture content, however conditions during shipping could range from 5 (very dry) to 20% (very humid). The packaging systems incorporated were reported to be efficient at protecting the wooden articles from damage during transit. The research highlighted the potential risk for wood components to ‘move’ in response to periods of drier or more humid conditions than those at the time of manufacturing, and the importance of engineering a packaging system that can account for the environmental conditions experienced in shipping containers. Examples of potential dimensional changes in wooden components were calculated based on published unit shrinkage data for key species and the climatic data returned from the logging equipment. The information highlighted the importance of good design to account for possible timber movement during shipping. A timber movement calculator was developed to allow designers to input component species, dimensions, site of manufacture and destination, to see validate their product design. This calculator forms part of the free interactive website www.timbers.com.au.

John Searlen teoria tietoisuudesta

Tutkielmassa esitellään ja arvioidaan John Searlen teoriaa tietoisuudesta. Tietoisuus (consciousness) on Searlen mukaan tärkein mielenfilosofinen käsite. Searle ei määrittele käsitettä tarkasti, vaan tyytyy esittämään sitä kuvaavia esimerkkejä ja analogioita. Tietoisuuden keskeisimmiksi ominaisuuksiksi Searlen teoriassa näyttävät muodostuvan intentionaalisuus (intentionality), subjektiivisuus (subjectivity) ja kausaalinen vaikutus käyttäytymiseen (mental causation). Näihin ominaisuuksiin liittyvät myös Searlen painavimmat tietoisuudesta esittämät argumentit. Argumenttien analysointi on tutkielman tärkein tavoite. Searlen yhteysperiaatteen (Connection Principle) mukaan intentionaalisia tiloja voi olla vain olennolla, jolla voi olla tietoisia intentionaalisia tiloja, ja jokainen alitajuinen intentionaalinen tila on ainakin potentiaalisesti tietoinen. Toisin sanoen intentionaalisuuden ja tietoisuuden välillä vallitsee välttämätön yhteys seuraavasti: on loogisesti välttämätöntä, että jokainen intentionaalinen tila voi ainakin periaattessa päästä tietoisuuteen.Tutkielmassa kuitenkin osoitetaan, että yhteysperiaateeseen on syytä suhtautua epäillen. Searlen yhteysperiaatteen puolesta esittämä argumentti näyttää nimittäin sisältävän dilemman. Jos erottelu intrinsiseen ja näennäiseen intentionaalisuuteen tulkitaan Searlen tavoin, syyllistytään sen olettamiseen, mikä pitäisi todistaa; jos taas erottelu tulkitaan toisin kuin Searle, argumentti ei tue yhteysperiaatetta. Searlen mukaan mentaaliset tilat ovat aina jonkun mentaalisia tiloja. Tästä väitteestä Searle pyrkii johtamaan toisen, paljon radikaalimman väitteen: mielen ilmiöt kuuluvat omaan ontologiseen kategoriaansa, subjektiivisten mentaalisten tilojen kategoriaan. Searlen käsitystä tukee Thomas Nagelin esittämä, hyvin samansisältöinen argumentti. Yksimielisyys ei kuitenkaan ole erehtymättömyyden tae, sillä Paul Churchlandin kritiikki näyttää pahasti horjuttavan Searlen subjektiivisuusargumentin uskottavuutta. Churchland väittää Searlen syyllistyvän intensionaaliseen virhepäätelmään. Yksittäisen henkilön episteemisen pääsyn rajoittuneisuudesta ei Churchlandin mukaan voida tehdä mitään ontologisia johtopäätöksiä, koska tiedetyksi tuleminen ei ole objektin aito ominaisuus. Vastaväite näyttää olevan kohtalokas Searlen subjektiivisuusargumentille. Subjektiivisuuden ongelma näyttää olevan perustava metafyysinen vedenjakaja, joka jakaa mielenfilosofiset teoriat toisaalta materialistisiin, toisaalta dualistisiin. Searle uskoo, että mieli-ruumis -ongelma (mind-body problem) on ratkaistavissa ilman, että tarvitsee valita kumpaakaan. Ratkaisu sisältyy kahteen Searlen näennäisesti yhteensopimattomaan teesiin. Ensimmäisen teesin mukaan mentaaliset tilat ovat todellisia ilmiöitä, eikä niitä voida redusoida mihinkään muuhun tai eliminoida määrittelemällä ne uudestaan. Toisen teesin mukaan aivojen operaatiot aiheuttavat mentaaliset tilat ja mentaaliset tilat ovat aivojen piirteitä. Teeseistä jälkimmäinen osoittautuu ongelmalliseksi syistä, jotka Jaegwon Kim on esittänyt. Jos mentaaliset tilat olisivat aivojen ominaisuuksia, ei mielen ja aivojen välinen suhde voisi olla kausaalinen, koska kausaatiossa (causation) on aina kyse kahden erillisen entiteetin tai tapahtuman välisestä relaatiosta, jossa suhteen osapuolien välillä on oltava ajallista etäisyyttä. Toiseksi Searlen vertaus tietoisuuden ja aivojen suhteesta kappaleen kiinteyden ja sen mikrorakenteen suhteeseen epäonnistuu, koska tietoisuus ja kiinteys kuuluvat Searlen teoriassa eri ontologisiin kategorioihin, eikä niitä siten voi ongelmattomasti rinnastaa. Searlen analogia kiinteyteen murtuu myös siksi, että kappaleen mikrorakenne ei yksinkertaisesti aiheuta sen kiinteyttä. Tietoisuus ei siis voi olla samanaikaisesti aivojen ominaisuus ja aivojen kausaalisen toiminnan seuraus. Tutkielmassa päädytään puolustamaan kantaa, että Searlen argumentit eivät ole vakuuttavia ja että Searle ei ole onnistunut eksplikoimaan teoriaa, joka välttäisi dualismiin ja materialismiin liittyvät tunnetut ongelmat. Kysymys mikä on mielen suhde ruumiiseen, jää siten avoimeksi. Avainsanat: intentionaalisuus, mentaalinen, mieli-ruumis -ongelma, Searle, subjektiivisuus, tietoisuus

Communities of wood-inhabiting fungi : Ecological requirements and responses to forest management and fragmentation

Despite much research on forest biodiversity in Fennoscandia, the exact mechanisms of species declines in dead-wood dependent fungi are still poorly understood. In particular, there is only limited information on why certain fungal species have responded negatively to habitat loss and fragmentation, while others have not. Understanding the mechanisms behind species declines would be essential for the design and development of ecologically effective and scientifically informed conservation measures, and management practices that would promote biodiversity in production forests. In this thesis I study the ecology of polypores and their responses to forest management, with a particular focus on why some species have declined more than others. The data considered in the thesis comprise altogether 98,318 dead-wood objects, with 43,085 observations of 174 fungal species. Out of these, 1,964 observations represent 58 red-listed species. The data were collected from 496 sites, including woodland key habitats, clear-cuts with retention trees, mature managed forests, and natural or natural-like forests in southern Finland and Russian Karelia. I show that the most relevant way of measuring resource availability can differ to a great extent between species seemingly sharing the same resources. It is thus critical to measure the availability of resources in a way that takes into account the ecological requirements of the species. The results show that connectivity at the local, landscape and regional scales is important especially for the highly specialized species, many of which are also red-listed. Habitat loss and fragmentation affect not only species diversity but also the relative abundances of the species and, consequently, species interactions and fungal successional pathways. Changes in species distributions and abundances are likely to affect the food chains in which wood-inhabiting fungi are involved, and thus the functioning of the whole forest ecosystem. The findings of my thesis highlight the importance of protecting well-connected, large and high-quality forest areas to maintain forest biodiversity. Small habitat patches distributed across the landscape are likely to contribute only marginally to protection of red-listed species, especially if habitat quality is not substantially higher than in ordinary managed forest, as is the case with woodland key habitats. Key habitats might supplement the forest protection network if they were delineated larger and if harvesting of individual trees was prohibited in them. Taking the landscape perspective into account in the design and development of conservation measures is critical while striving to halt the decline of forest biodiversity in an ecologically effective manner.

Untitled (after Steven and John)

'Untitled (after Steven and John)' takes inspiration from Spielbergian tracking shots and Baldessarian collages to create ghostly apparitions that explore the affective power of the cinematic close up. By appropriating and obfuscating this common filmic convention, the work investigates the intersubjective potential of the moving image.

The effect of lignin content and lignin modification on Norway spruce wood properties and decay resistance

Three different Norway spruce cutting clones growing in three environments with different soil and climatic conditions were studied. The purpose was to follow variation in the radial growth rate, wood properties and lignin content and to modify wood lignin with a natural monolignol, coniferyl alcohol, by making use of inherent wood peroxidases. In addition, the incorporation of chlorinated anilines into lignin was studied with synthetic model compounds and synthetic lignin preparations to show whether unnatural compounds originating from pesticides could be bound in the lignin polymer. The lignin content of heartwood, sapwood and earlywood was determined by applying Fourier transform infrared (FTIR) spectroscopy and a principal component regression (PCR) technique. Wood blocks were treated with coniferyl alcohol by using a vacuum impregnation method. The effect of impregnation was assessed by FTIR and by a fungal decay test. Trees from a fertile site showed the highest growth rate and sapwood lignin content and the lowest latewood proportion, weight density and modulus of rupture (MOR). Trees from a medium fertile site had the lowest growth rate and the highest latewood proportion, weight density, modulus of elasticity (MOE) and MOR. The most rapidly growing clone showed the lowest latewood proportion, weight density, MOE and MOR. The slowest growing clone had the lowest sapwood lignin content and the highest latewood proportion, weight density, MOE and MOR. Differences between the sites and clones were small, while fairly large variation was found between the individual trees and growing seasons. The cutting clones maintained clone-dependent wood properties in the different growing sites although variation between trees was high and climatic factors affected growth. The coniferyl alcohol impregnation increased the content of different lignin-type phenolic compounds in the wood as well as wood decay resistance against a white-rot fungus, Coriolus versicolor. During the synthetic lignin preparation 3,4-dichloroaniline became bound by a benzylamine bond to β-O-4 structures in the polymer and it could not be released by mild acid hydrolysis. The natural monolignol, coniferyl alcohol, and chlorinated anilines could be incorporated into the lignin polymer in vivo and in vitro, respectively.