910 resultados para Wilt, Joshua
Resumo:
Os tospovírus são responsáveis por perdas significativas em diversas culturas, principalmente solanáceas. No município de São José dos Campos (SP), plantas de jiló (Solanum gilo) apresentando sintomas de mosaico, bolhosidades, nanismo e queda acentuada da produção foram coletadas para análise. Visando a caracterização do agente causador dos sintomas, testes biológicos, elétrono microscópicos, sorológicos e moleculares foram realizados. Através de inoculação mecânica em plantas indicadoras das famílias Amaranthaceae, Chenopodiaceae e Solanaceae obtiveram-se resultados típicos aos esperados para tospovírus. Ao microscópio eletrônico de transmissão, observaram-se, em contrastação negativa, partículas pleomórficas com diâmetro entre 80 e 110 nm e em cortes ultra-finos partículas presentes em vesículas do retículo endoplasmático. Através de DAS-ELISA, identificou-se o Tomato chlorotic spot virus (TCSV). A partir de RNA total extraído de folhas infetadas, amplificaram-se, via RT-PCR, fragmentos correspondentes ao gene da proteína do capsídeo (cp) os quais foram seqüenciados e comparados com outros depositados no "GenBank". A homologia de nucleotídeos e aminoácidos deduzidos foi respectivamente de 99 e 95% quando comparada com seqüências de isolados de TCSV. A comparação com as outras espécies do gênero Tospovirus apresentou valores de homologia entre 72 e 84%. Estes resultados confirmam a identidade deste vírus como pertencente à espécie TCSV, que é predominante no Estado de São Paulo e importante patógeno de outras plantas cultivadas. Além disso, variedades de jiló quando inoculadas foram susceptíveis tanto ao TCSV como às espécies Tomato spotted wilt virus (TSWV) e Groundnut ringspot virus (GRSV).
Resumo:
O gênero Erigeron (Asteraceae), de plantas da vegetação espontânea, encontra-se amplamente disseminado nas regiões Sul e Sudeste do Brasil, sendo freqüentemente encontrado em lavouras perenes e anuais. Plantas de E. bonariensis com sintoma de mosaico, típico do induzido por vírus, foram coletadas no município de São Paulo e submetidas a análises ao microscópio eletrônico de transmissão, testes biológicos, sorológicos e moleculares. Em cortes ultrafinos do tecido foliar original, observaram-se inclusões tubulares e cata-ventos dispersos no citoplasma. Através de inoculação mecânica, somente Chenopodium amaranticolor, C. quinoa, Nicotiana benthamiana e N. clevelandii foram infetadas. Os resultados obtidos em ELISA foram negativos quando se utilizaram antissoros contra o Turnip mosaic vírus (TuMV) e diferentes estirpes do Potato virus Y (PVY), constatando-se relacionamento sorológico com o Lettuce mosaic virus (LMV). Com a utilização de oligonucleotídeos específicos para LMV amplificaram-se fragmentos esperados de aproximadamente 280 pb, que seqüênciados confirmaram a identidade do vírus. A ocorrência do LMV em E. bonariensis, gênero da mesma família botânica da alface (Lactuca sativa), é de grande importância, pois talvez possa atuar como reservatório para infecção de campos de produção de alface. Este é o primeiro relato, no Brasil, de vírus infetando Erigeron sp., o qual só havia sido reportado como hospedeira natural do Bidens mottle virus (BiMoV) e do Tomato spotted wilt virus (TSWV) nos Estados Unidos.
Resumo:
In the regions of Campinas and Sumaré, São Paulo, Brazil, hidroponically grown crops of Lettuce (Lactuca sativa) cv. Verônica, which showed virus-like symptoms were examined by electron microscope, biological, serological and molecular tests. Pleomorphic, enveloped particles (80-100 nm in diameter) were always detected in these samples. Experimentally inoculated host plants, including lettuce, reacted with tospoviruses-induced symptoms. Some differences were observed in Gomphrena globosa, which reacted by showing local lesions and systemic mosaic. Two isolates of Tomato chlorotic spot virus (TCSV) were identified by DAS-ELISA and by RT-PCR. The sequencing and alignment of the RT-PCR coat protein amplified fragments have indicated a high degree of homology with the TCSV sequences stored in the GenBank. This is the first report of losses due to a virus from the genus Tospovirus in commercial hydroponic lettuce crops in Brazil. Further epidemiological studies are needed for better understanding the spread of the virus in hydroponic crops, since Tomato spotted wilt virus (TSWV) is reported to spread through the nutritive solution.
Resumo:
Using PCR-based assays with specific primers for amplification of the ribosomal DNA intergenic spacer region (IGS) and a portion of the mitochondrial DNA small subunit ribosomal RNA gene (mtDNA SSU rRNA), the genetic variability among Verticillium dahliae isolates from olive (Olea europaea) and other host species from Argentina and Brazil was estimated. The derived UPGMA-generated phenograms based upon the restriction fingerprinting data of rDNA IGS products revealed genetic differences, correlating with the host of origin. Isolates infecting olive genetically distinct from those from cocoa (Theobroma cacao) and sunflower (Helianthus annuus). Digestion of mitochondrial DNA SSU rRNA PCR products revealed less variability, distinguishing only one isolate from sunflower. Ribosomal DNA ITS restriction patterns were identical for all isolates of V. dahliae, irrespective of host of origin. These preliminary results may have relevance for Verticillium wilt control practices, possibly reflecting a different evolutionary origin, or reproductive isolation of the pathogen in olive, distinct from populations of other hosts.
Resumo:
The objective of this research was to develop a primer for a polymerase chain reaction specific for Xylella fastidiosa strains that cause Pierce's Disease (PD) in grapes (Vitis vinifera). The DNA amplification of 23 different strains of X. fastidiosa, using a set of primers REP1-R (5'-IIIICGICGIATCCIGGC-3') and REP 2 (5'-ICGICTTATCIGGCCTAC-3') using the following program: 94 ºC/2 min; 35 X (94 ºC/1 min, 45 ºC/1 min and 72 ºC/1 min and 30 s) 72 ºC/5 min, produced a fragment of 630 bp that differentiated the strains that cause disease in grapes from the other strains. However, REP banding patterns could not be considered reliable for detection because the REP1-R and REP 2 primers correspond to repetitive sequences, which are found throughout the bacterial genome. The amplified product of 630 bp was eluted from the agarose gel, purified and sequenced. The nucleotide sequence information was used to identify and synthesize an specific oligonucleotide for X. fastidiosa strains that cause Pierce's Disease denominated Xf-1 (5'-CGGGGGTGTAGGAGGGGTTGT-3') which was used jointly with the REP-2 primer at the following conditions: 94 ºC/2 min; 35 X (94 ºC/1 min, 62 ºC/1 min; 72 ºC/1 min and 30 s) 72 ºC/10 min. The DNAs isolated from strains of X. fastidiosa from other hosts [almond (Prumus amygdalus), citrus (Citrus spp.), coffee (Coffea arabica), elm (Ulmus americana), mulberry (Morus rubra), oak (Quercus rubra), periwinkle wilt (Catharantus roseus), plums (Prunus salicina) and ragweed (Ambrosia artemisiifolia)] and also from other Gram negative and positive bacteria were submitted to amplification with a pair of primers Xf-1/REP 2 to verify its specificity. A fragment, about 350 bp, was amplified only when the DNA from strains of X. fastidiosa isolated from grapes was employed.
Resumo:
Fusarium wilt, caused by three races of Fusarium oxysporum f. sp. lycopersici, is one of the most important diseases of tomato (Lycopersicon esculentum). Races 1 and 2 are distributed worldwide whereas race 3 has a more limited geographic distribution with no report thus far in Brazil. Seven F. oxysporum isolates were obtained from wilted tomato plants of race 1 and 2-resistant hybrids 'Carmen' and 'Alambra' in Venda Nova do Imigrante (State of Espírito Santo), Brazil. Virulence assays were performed using a set of the race differential cultivars: 'Ponderosa' (susceptible to all races), 'IPA-5' (resistant to race 1), 'Floradade' (resistant to races 1 and 2) and 'BHRS-2,3' (resistant to race 3). All isolates were highly virulent to 'Ponderosa', 'IPA-5' and 'Floradade' and were able to infect only a few plants of 'BHRS-2,3'. An additional virulence test was conducted including the same set of cultivars plus Lycopersicon pennellii 'LA 716'. Identical results were obtained with L. pennellii displaying an extreme (immune-like) resistant response. These results indicated that all seven isolates could be classified as F. oxysporum f. sp. lycopersici race 3. This new Fusarium wilt might became an economically important disease since race 3-resistant cultivars adapted to Brazil are not yet available.
Resumo:
The objectives of this study were to evaluate the progress of Ralstonia solanacearum bacterial potato wilt biovar 2 (race 3) in 14 potato (Solanum tuberosum L.) cultivars or clones, the resistance of potato clone MB 03 (selected in Brasília, Brazil) to race 1 of R. solanacearum, and the occurrence of the pathogen in tubers harvested from asymptomatic potato plants. During the spring (September to the end of November in the southern hemisphere) of 1999 and 2000, 14 cultivars or clones were grown in a field naturally infested with R. solanacearum biovar 2, in Caxias do Sul, RS. The number of wilted potato plants was recorded each week and a disease progress curve plotted, the resistance of the potato genotypes to bacterial wilt being evaluated by determining the area under the curve. Various models were evaluated to fit the curves, with the logistic model being the best fit. At the end of each growing season tubers produced by asymptomatic plants were harvested and stored until budding and then tested for the presence of R. solanacearum. Cultivar Cruza 148 and clone MB 03 were the most resistant but both showed tubers with latent infections. The epidemiological implications of the incidence of R. solanacearum biovar 2 (race 3) in potato crops, as well as the resistance of certain genotypes that may harbor latent infections, are important aspects to be considered in the integrated management of bacterial wilt.
Resumo:
Tutkielmassa perehdytään verkostosivusto Facebookiin mediatutkimuksen välineteoreettisesta näkökulmasta. Tarkoituksena on selvittää, millainen viestintäympäristö Facebook on ja millä tavoin sitä voidaan pitää 2000-luvun ajankuvana. Tutkielma on luonteeltaan teoriavetoinen, ja sen pääasiallinen aineisto on Facebook.com-sivusto. Tutkielma pohjaa välineteoreetikko Joshua Meyrowitzin mediametaforille, joista viimeinen, media ympäristönä, toimii työn teoreettisena viitekehyksenä. Media ympäristönä -metafora hahmottaa mediat teknologisen väline-erityisyyden kannalta esittäen, että jokainen media muodostaa omanlaisensa ainutkertaisen ympäristön tai kontekstin. Ympäristö-metafora kysyy, mitkä kunkin mediumin piirteistä tekevät kyseisestä mediumista fysikaalisesti, psykologisesti tai sosiaalisesti erilaisen kuin muut mediat tai kasvokkainen vuorovaikutus. Tutkielma koostuu kuudesta osasta, joissa käydään läpi Facebook-ilmiön taustaa, verkostosivustojen historiaa, yhteisöteoriaa, tilallisuutta ja sen ilmenemistä Facebookissa, sivuston luonnetta ja erityispiirteitä mediumina sekä sen asemaa mediamaisemassamme. Tutkielma pyrkii osoittamaan Facebook-sivuston käyttäjien olevan yhteisö, jonka synty, vuorovaikutus ja sosiaalinen kanssakäyminen pohjaavat yhteiseen, teknologian välittämään jaettuun tilaan. Verkkotila luo verkkoarkkitehtonisten ratkaisujen avulla käyttäjien välille yhteenkuuluvuuden tunnetta yhteisen fyysisen tilan lailla. Tutkielma osoittaa Facebookin tärkeimmän yhteisöllisyyttä rakentavan verkkoarkkitehtonisen elementin olevan mahdollisuus yhteiseen, uutisvirrassa tapahtuvaan tarinankerrontaan, mikä tekee Facebookista kollektiivisen kertomuksen. Facebook on hybridinen viestintäympäristö, joka yhdistelee elementtejä eri medioista, hämärtää yksityisen ja julkisen viestinnän rajan, antaa mahdollisuuden yhtäältä kaupallisille intresseille ja toisaalta kansalaistoiminnalle ja muuttaa sen, mitä ihmiset tietävät toisistaan. Facebook voidaan sitoa laajempaan kulttuuriseen kontekstiin, sillä se heijastaa paitsi vallitsevia mediakentän trendejä myös 2000-luvulle ominaista medioitunutta ubiikkielämää.
Resumo:
Kirjallisuusarvostelu
Resumo:
The rising demand for oil and gas has made it very necessary for the oil and gas industries to explore the offshore. There is a huge resources which is available in the offshore. The search for oil and gas is faced with greater challenges because of the nature of the marine environment as it poses difficult and harsh conditions for the construction of offshore structures. The major problem of the construction of offshore structure is the ability to produce a sound weld that gives the whole structure the structural integrity needed to withstand the harsh environmental conditions. This research work presents the performance of typical offshore steels with improved weldability. The ability of reducing the carbon content of thermo-mechanically rolled steels down to 0.08% makes it possible to achieve good weldability, toughness and strength for high strength steels used in offshore applications. Importantly, the ideal welding procedure should be strictly followed as recommended. The fabrication process is as important as the welding procedure in achieving a sound weld which is free of weld defects such as hydrogen induced cracking, lamellar tearing and solidification cracking. This research work also considers the corrosion as it affects offshore structure and necessary measures to mitigate the problem caused by corrosion.
Resumo:
The present research aims to evaluate the usefulness of the application of Life Cycle Management in the agricultural sector focusing on the environmental and socio-economic aspects of decision making in the Colombian cocoa production. Such appraisal is based on the application of two methodological tools: Life Cycle Assessment, which considers environmental impacts throughout the life cycle of the cocoa production system, and Taguchi Loss Function, which measures the economic impact of a process' deviation from production targets. Results show that appropriate improvements in farming practices and supply consumption can enhance decision-making in the agricultural cocoa sector towards sustainability. In terms of agri-business purposes, such qualitative shift allows not only meeting consumer demands for environmentally friendly products, but also increasing the productivity and competitiveness of cocoa production, all of which has helped Life Cycle Management gain global acceptance. Since farmers have an important role in improving social and economic indicators at the national level, more attention should be paid to the upgrading of their cropping practices. Finally, one fundamental aspect of national cocoa production is the institutional and governmental support available for farmers in face of socio-economic or technological needs.
Resumo:
The construction of offshore structures, equipment and devices requires a high level of mechanical reliability in terms of strength, toughness and ductility. One major site for mechanical failure, the weld joint region, needs particularly careful examination, and weld joint quality has become a major focus of research in recent times. Underwater welding carried out offshore faces specific challenges affecting the mechanical reliability of constructions completed underwater. The focus of this thesis is on improvement of weld quality of underwater welding using control theory. This research work identifies ways of optimizing the welding process parameters of flux cored arc welding (FCAW) during underwater welding so as to achieve desired weld bead geometry when welding in a water environment. The weld bead geometry has no known linear relationship with the welding process parameters, which makes it difficult to determine a satisfactory weld quality. However, good weld bead geometry is achievable by controlling the welding process parameters. The doctoral dissertation comprises two sections. The first part introduces the topic of the research, discusses the mechanisms of underwater welding and examines the effect of the water environment on the weld quality of wet welding. The second part comprises four research papers examining different aspects of underwater wet welding and its control and optimization. Issues considered include the effects of welding process parameters on weld bead geometry, optimization of FCAW process parameters, and design of a control system for the purpose of achieving a desired bead geometry that can ensure a high level of mechanical reliability in welded joints of offshore structures. Artificial neural network systems and a fuzzy logic controller, which are incorporated in the control system design, and a hybrid of fuzzy and PID controllers are the major control dynamics used. This study contributes to knowledge of possible solutions for achieving similar high weld quality in underwater wet welding as found with welding in air. The study shows that carefully selected steels with very low carbon equivalent and proper control of the welding process parameters are essential in achieving good weld quality. The study provides a platform for further research in underwater welding. It promotes increased awareness of the need to improve the quality of underwater welding for offshore industries and thus minimize the risk of structural defects resulting from poor weld quality.
Resumo:
The purpose of this study was to determine the effect of increased soil moisture levels on
the decomposition processes in a peat-extracted bog. Field experiments, in which soil
moisture levels were manipulated, were conducted using 320 microcosms in the
Wainfleet Bog from May 2002 to November 2004. Decomposition was measured using
litter bags and monitoring the abundance of macro invertebrate decomposers known as
Collembola. Litter bags containing wooden toothpicks (n=2240), filter paper (n=480)
and Betula pendula leaves (n=40) were buried in the soil and removed at regular time
intervals up to one year. The results of the litter bag studies demonstrated a significant
reduction of the decomposition of toothpicks (p<0.001), filter paper (p<0.001), and
Betula pendula leaves (p
Resumo:
Bibliogr.