Influence of processing medium on frictional wear properties of ball bearing steel prepared by laser surface melting coupled with bionic principles

Coupling with bionic principles, an attempt to improve the wear resistance of ball bearing steel (GCr15) with biomimetic units on the surface was made using a pulsed Nd: YAG laser. Air and water film was employed as processing medium, respectively. The microstructures of biomimeitc units were examined by scanning electron microscope and X-ray diffraction was used to describe the microstructure and identify the phases as functions of different mediums as well as water film with different thicknesses. The results indicated that the microstructure zones in the biomimetic specimens processed with water film were more refined and had better wear resistance increased by 55.8% in comparison with that processed in air; a significant improvement in microhardness was achieved by laser surface melting. The application of water film provided considerable microstructural changes and much more regular grain shape in biomimetic units, which played a key role in improving the wear resistance of ball bearing steel. (c) 2010 Elsevier B.V. All rights reserved.

Crystallographic and electrochemical characteristics of TiZrNiCu quasicrystal ball-milled with La0.9Zr0.1Ni4.5Al0.5 alloy

Icosahedral quasicrystalline Ti45Zr35Ni17Cu3 alloy was ball-milled with 30 mass% La0.9Zr0.1Ni4.5Al0.5 alloy (LaNi5 phase), the effect of the milling time on crystallographic and electrochemical characteristics of the alloy powder was investigated. The amount of amorphous phase increased with increasing milling time from 60 to 360 min, and the LaNi5 phase cannot be observed when milling time was 240 min or more. The maximum discharge capacity and high-rate dischargeability of milled alloy electrodes were obviously higher than those of the alloy electrode before milling. The cycling capacity retention rate after 40 cycles increased from 52.8% (t = 60 min) to 62.9% (t = 360 min).

Crystallographic and electrochemical characteristics of Ti45Zr35Ni17Cu3 quasicrystalline alloy ball-milled with nickel powder

Crystallographic and electrochemical characteristics of ball-milled Ti45Zr35Ni17Cu3 +xNi (x = 0, 5, 10, 15 and 20 mass%) composite powders have been investigated. The powders are composed of amorphous, I- and Ni-phases when x increases from 5 to 20. With increasing x, the amount of Ni-phase increases but the quasi-lattice constant decreases. The maximum discharge capacity first increases as x increases from 0 to 15 and then decreases when x increases further from 15 to 20. The high-rate dischargeability and cycling stability increase monotonically with increasing x. The improvement of the electrochemical characteristics is ascribed to the metallic nickel particles highly dispersed in the alloys, which improves the electrochemical kinetic properties and prevents the oxidation of the alloy electrodes, as well as to the mixed structure of amorphous and icosahedral quasicrystal line phases, which enhances the hydrogen diffusivity in the bulk of the alloy electrodes and efficiently inhibits the pulverization of the alloy particles.

Crystallographic and electrochemical properties of ball-milled quasicrystalline Ti45Zr35Ni17Cu3 alloy with 20 mass% Ni

Icosahedral quasicrystalline Ti45Zr35Ni17Cu3 alloy powder was ball-milled with 20 mass% Ni, and the effect of the ball-milling time (t) on crystallographic and electrochemical characteristics were investigated. The amounts of icosahedral quasicrystalline and Ni phases decreased when ball-milling time increased from 30 to 180 min. The powder consisted of amorphous and (Ni and Ti) phases after 360 min of ball-milling. The maximum discharge capacity of the powder electrodes first increased from 89 (t = 0 min) to 192 mAh g(-1) (t = 180 min), and then decreased to 138 mAh g(-1) (t = 360 min). The high-rate dischargeability and the discharge capacity after 15 cycles increased with increasing ball-milling time.

Electrode characteristics and microstructure of AB(2)-AB(5) composite hydrogen storage alloy formed by ball-milling process

For improving the electrode characteristics of the Zr-based AB(2)-type alloy, a new kind of composite hydrogen Zr0.9Ti0.1(Ni0.50Mn0.35V0.15)(2)(represented as AB(2)) with a rare storage alloy was successfully prepared by ball-milling I earth-based AB(5)-type alloy (represented as AB(5)) which worked as a surface modifier. Effects of ball-milling on the electrode characteristics and microstructure of Zr0.9Ti0.1(Ni0.50Mn0.35V0.15)(2) alloy and mixtures of AB(2) with AB(5) alloy were investigated. After milling the mixed AB(2) and AB(5) powders (9: 1 in mass ratio) for 10min, XRD and SEM analysis showed that AB(2) and AB(5) maintained their original crystalline states, respectively, some AB(5) particles were adhered onto the surface of AB(2), and some fresh surfaces were formed. It was found that the activation cycles of AB(2)-AB(5) composite alloy was shortened from 14 to 7 and the maximum discharge capacity was increased from 330mAh . g(-1) to 347mAh . g(-1) as compared with AB(2) alloy. The discharge rate capability of AB(2) alloy was also improved by ball milling AB(2) with AB(5) alloy process. The combined effect of ball-milling and mixing with AB(5) alloy is superior to that of sole treatment. It was believed that AB(5) alloy works not only as a regular hydrogen storage alloy, but also as a surface modifier to catalyze the hydriding/ dehydriding process of AB(2) alloy.

A Sermon on the occasion of the death of Mrs. Mary Chapman Halsey

Memorial Sermon

A history of Indian missions on the Pacific coast : Oregon, Washington and Idaho / by Myron Eells ; with an introduction by G.H. Atkinson.

http://www.archive.org/details/missionspacific00eellrich

The child in the midst : a comparative study of child welfare in Christian and non-Christian lands / by Mary Schauffler Labaree.

http://www.archive.org/details/childinthemidst028451mbp

Historical sketch of the Flathead Indian nation from the year 1813 to 1890 : embracing the history of the establishment of St. Mary's Indian Mission in the Bitter Root Valley, Mont. : with sketches of the missionary life of Father Ravalli and other early missionaries : wars of the Blackfeet and Flatheads and sketches of history, trapping and trading in the early days / by Peter Ronan.

http://www.canadiana.org/ECO/mtq?doc=16974 View document online

Mary and I. Forty years with the Sioux.

http://www.archive.org/details/maryandifortyyea00riggrich

Report on Archaeological Investigations Conducted at the St. Mary's Site (18AP45), 107 Duke of Gloucester Street, Annapolis, Maryland, 1987-1990

In celebration of the 250th anniversary of the birth of Charles Carroll of Carrollton, Archaeology in Annapolis was invited to excavate the Carroll House and garden on 107 Duke of Gloucester Street in Annapolis, Maryland. The site, named the St. Mary's Site (18AP45) for the Catholic church on the property, is currently owned by the Redemptorists, a Roman Catholic congregation of priests and brothers who have occupied the site since 1852. Prior to the Redemptorists' tenure, the site was owned by the Carroll family from 1701-1852 and is perhaps best known as the home of Charles Carroll of Carrollton (1737-1832), signer of the Declaration of Independence. Excavations at the site were conducted during four consecutive summer seasons from 1987-1990. The investigation focused on three research questions. The first line of inquiry were questions surrounding the dating, architectural configuration, and artifact deposits of the "frame house," a structure adjoining the west wall of the brick Carroll House via a "passage" and later a three story addition. The frame house was partially demolished in the mid-nineteenth century but the construction was thought to pre-date the brick portion of the house. The second research question was spurred by documentary research which indicated that the property might have been the location of Proctor's Tavern, a late 17th-century tavern which served as the meeting place of the Maryland Provincial Assembly. Archaeological testing hoped to determine its location and, if found, investigate Annapolis' early Euro-American occupation. The third research question focused on the landscape of the site as it was shaped by its occupants over the past three hundred years. The research questions included investigating the stratigraphy, geometry, and architectural and planting features of Charles Carroll of Carrollton's terraced garden built during the 1770s, and investigating the changes to the landscape made by the Redemptorists in the nineteenth and twentieth centuries. While no structural evidence associated with Proctor’s Tavern was uncovered during limited excavations along Spa Creek, the historic shore of Spa Creek was identified, buried beneath deep fill deposits laid down during construction of the Carroll Garden. Features and deposits associated with this period likely remain intact in a waterlogged environment along the southeastern sea wall at the St. Mary’s Site. Evidence of extensive earth moving by Carroll is present in the garden and was identified during excavation and coring. This strongly suggests that the garden landscape visible at the St. Mary’s Site is the intact Carroll Garden, which survives beneath contemporary and late nineteenth century strata. The extant surviving garden should be considered highly sensitive to ground-disturbing activities, and is also highly significant considering demonstrable associations with the Carroll family. Other garden-related features were also discovered, including planting holes, and a brick pavilion or parapet located along Spa Creek to the south of the site. The Duke of Gloucester Street wall was shown to be associated with the Carroll occupation of the site. Finally, intensive archaeological research was directed at the vicinity of a frame house constructed and occupied by the Carrolls to the east of the existing brick house, which was replaced by the Redemptorists in the nineteenth century with a greenhouse. These superimposed buildings were documented in detail and remain highly significant features at the St. Mary’s Site.

ARAB MUSICIANS IN WASHINGTON, D.C. AREA: ETHNICITY AND IDENTITY

Musicians living in the Arab Diaspora around the Washington, D.C. metro area are a small group of multi-faceted individuals with significant contributions and intentions to propagate and disseminate their music. Various levels of identity are discussed and analyzed, including self-identity, group/ collective identity, and Arab ethnic identity. The performance and negotiation of Arab ethnic identity is apparent in selected repertoire, instrumentation, musical style, technique and expression, shared conversations about music, worldview on Arabic music and its future. For some musicians, further evidence of self-construction of one's ethnic identity entails choice of name, costume, and venue. Research completed is based on fieldwork, observations, participant-observations, interviews, and communications by phone and email. This thesis introduces concepts of Arabic music, discusses recent literature, reveals findings from case studies on individual Arab musicians and venues, and analyzes Arab identity and ethnicity in relation to particular definitions of identity found in anthropological and ethnomusicological writings. Musical lyrics, translations, transcriptions, quotes, discussions, analyses, as well as charts and diagrams of self-identity analyses are provided as evidence of the performance and negotiation of Arab identity.

Global value chains in a post-Washington Consensus world

Contemporary globalization has been marked by significant shifts in the organization and governance of global industries. In the 1970s and 1980s, one such shift was characterized by the emergence of buyer-driven and producer-driven commodity chains. In the early 2000s, a more differentiated typology of governance structures was introduced, which focused on new types of coordination in global value chains (GVCs). Today the organization of the global economy is entering another phase, with transformations that are reshaping the governance structures of both GVCs and global capitalism at various levels: (1) the end of the Washington Consensus and the rise of contending centers of economic and political power; (2) a combination of geographic consolidation and value chain concentration in the global supply base, which, in some cases, is shifting bargaining power from lead firms in GVCs to large suppliers in developing economies; (3) new patterns of strategic coordination among value chain actors; (4) a shift in the end markets of many GVCs accelerated by the economic crisis of 2008-09, which is redefining regional geographies of investment and trade; and (5) a diffusion of the GVC approach to major international donor agencies, which is prompting a reformulation of established development paradigms. © 2013 © 2013 Taylor & Francis.